mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-15 21:30:43 +00:00
48fc7dbd52
Change the default enumeration scheme for xhci attached non-SuperSpeed devices from: Reset SetAddress [xhci address-device BSR = 0] GetDescriptor(8) GetDescriptor(18) ...to: Reset [xhci address-device BSR = 1] GetDescriptor(64) Reset SetAddress [xhci address-device BSR = 0] GetDescriptor(18) ...as some devices misbehave when encountering a SetAddress command prior to GetDescriptor. There are known legacy devices that require this scheme, but testing has found at least one USB3 device that fails enumeration when presented with this ordering. For now, follow the ehci case and enable 'new scheme' by default for non-SuperSpeed devices. To support this enumeration scheme on xhci the AddressDevice operation needs to be performed twice. The first instance of the command enables the HC's device and slot context info for the device, but omits sending the device a SetAddress command (BSR == block set address request). Then, after GetDescriptor completes, follow up with the full AddressDevice+SetAddress operation. As mentioned before, this ordering of events with USB3 devices causes an extra state transition to be exposed to xhci. Previously USB3 devices would transition directly from 'enabled' to 'addressed' and never need to underrun responses to 'get descriptor'. We do see the 64-byte descriptor fetch the correct data, but the following 18-byte descriptor read after the reset gets: bLength = 0 bDescriptorType = 0 bcdUSB = 0 bDeviceClass = 0 bDeviceSubClass = 0 bDeviceProtocol = 0 bMaxPacketSize0 = 9 instead of: bLength = 12 bDescriptorType = 1 bcdUSB = 300 bDeviceClass = 0 bDeviceSubClass = 0 bDeviceProtocol = 0 bMaxPacketSize0 = 9 which results in the discovery process looping until falling back to 'old scheme' enumeration. Acked-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: David Moore <david.moore@gmail.com> Suggested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
255 lines
5.9 KiB
C
255 lines
5.9 KiB
C
/*
|
|
* xhci-plat.c - xHCI host controller driver platform Bus Glue.
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
|
|
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
*
|
|
* A lot of code borrowed from the Linux xHCI driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include "xhci.h"
|
|
|
|
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
|
|
{
|
|
/*
|
|
* As of now platform drivers don't provide MSI support so we ensure
|
|
* here that the generic code does not try to make a pci_dev from our
|
|
* dev struct in order to setup MSI
|
|
*/
|
|
xhci->quirks |= XHCI_PLAT;
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int xhci_plat_setup(struct usb_hcd *hcd)
|
|
{
|
|
return xhci_gen_setup(hcd, xhci_plat_quirks);
|
|
}
|
|
|
|
static const struct hc_driver xhci_plat_xhci_driver = {
|
|
.description = "xhci-hcd",
|
|
.product_desc = "xHCI Host Controller",
|
|
.hcd_priv_size = sizeof(struct xhci_hcd *),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.irq = xhci_irq,
|
|
.flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = xhci_plat_setup,
|
|
.start = xhci_run,
|
|
.stop = xhci_stop,
|
|
.shutdown = xhci_shutdown,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = xhci_urb_enqueue,
|
|
.urb_dequeue = xhci_urb_dequeue,
|
|
.alloc_dev = xhci_alloc_dev,
|
|
.free_dev = xhci_free_dev,
|
|
.alloc_streams = xhci_alloc_streams,
|
|
.free_streams = xhci_free_streams,
|
|
.add_endpoint = xhci_add_endpoint,
|
|
.drop_endpoint = xhci_drop_endpoint,
|
|
.endpoint_reset = xhci_endpoint_reset,
|
|
.check_bandwidth = xhci_check_bandwidth,
|
|
.reset_bandwidth = xhci_reset_bandwidth,
|
|
.address_device = xhci_address_device,
|
|
.enable_device = xhci_enable_device,
|
|
.update_hub_device = xhci_update_hub_device,
|
|
.reset_device = xhci_discover_or_reset_device,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = xhci_get_frame,
|
|
|
|
/* Root hub support */
|
|
.hub_control = xhci_hub_control,
|
|
.hub_status_data = xhci_hub_status_data,
|
|
.bus_suspend = xhci_bus_suspend,
|
|
.bus_resume = xhci_bus_resume,
|
|
};
|
|
|
|
static int xhci_plat_probe(struct platform_device *pdev)
|
|
{
|
|
const struct hc_driver *driver;
|
|
struct xhci_hcd *xhci;
|
|
struct resource *res;
|
|
struct usb_hcd *hcd;
|
|
int ret;
|
|
int irq;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
driver = &xhci_plat_xhci_driver;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -ENODEV;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
|
|
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
return ret;
|
|
if (!pdev->dev.dma_mask)
|
|
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
|
|
else
|
|
dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
|
|
|
|
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
|
|
if (!hcd)
|
|
return -ENOMEM;
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
|
|
driver->description)) {
|
|
dev_dbg(&pdev->dev, "controller already in use\n");
|
|
ret = -EBUSY;
|
|
goto put_hcd;
|
|
}
|
|
|
|
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
dev_dbg(&pdev->dev, "error mapping memory\n");
|
|
ret = -EFAULT;
|
|
goto release_mem_region;
|
|
}
|
|
|
|
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (ret)
|
|
goto unmap_registers;
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
/* USB 2.0 roothub is stored in the platform_device now. */
|
|
hcd = platform_get_drvdata(pdev);
|
|
xhci = hcd_to_xhci(hcd);
|
|
xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
|
|
dev_name(&pdev->dev), hcd);
|
|
if (!xhci->shared_hcd) {
|
|
ret = -ENOMEM;
|
|
goto dealloc_usb2_hcd;
|
|
}
|
|
|
|
/*
|
|
* Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset)
|
|
* is called by usb_add_hcd().
|
|
*/
|
|
*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
|
|
|
|
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
|
|
if (ret)
|
|
goto put_usb3_hcd;
|
|
|
|
return 0;
|
|
|
|
put_usb3_hcd:
|
|
usb_put_hcd(xhci->shared_hcd);
|
|
|
|
dealloc_usb2_hcd:
|
|
usb_remove_hcd(hcd);
|
|
|
|
unmap_registers:
|
|
iounmap(hcd->regs);
|
|
|
|
release_mem_region:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
|
|
put_hcd:
|
|
usb_put_hcd(hcd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int xhci_plat_remove(struct platform_device *dev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(dev);
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
usb_remove_hcd(xhci->shared_hcd);
|
|
usb_put_hcd(xhci->shared_hcd);
|
|
|
|
usb_remove_hcd(hcd);
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
usb_put_hcd(hcd);
|
|
kfree(xhci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int xhci_plat_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
return xhci_suspend(xhci);
|
|
}
|
|
|
|
static int xhci_plat_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
return xhci_resume(xhci, 0);
|
|
}
|
|
|
|
static const struct dev_pm_ops xhci_plat_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
|
|
};
|
|
#define DEV_PM_OPS (&xhci_plat_pm_ops)
|
|
#else
|
|
#define DEV_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id usb_xhci_of_match[] = {
|
|
{ .compatible = "xhci-platform" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver usb_xhci_driver = {
|
|
.probe = xhci_plat_probe,
|
|
.remove = xhci_plat_remove,
|
|
.driver = {
|
|
.name = "xhci-hcd",
|
|
.pm = DEV_PM_OPS,
|
|
.of_match_table = of_match_ptr(usb_xhci_of_match),
|
|
},
|
|
};
|
|
MODULE_ALIAS("platform:xhci-hcd");
|
|
|
|
int xhci_register_plat(void)
|
|
{
|
|
return platform_driver_register(&usb_xhci_driver);
|
|
}
|
|
|
|
void xhci_unregister_plat(void)
|
|
{
|
|
platform_driver_unregister(&usb_xhci_driver);
|
|
}
|