mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 20:07:09 +00:00
bff4056c8b
Fix receive path underrun in i2c-sh_mobile driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
647 lines
18 KiB
C
647 lines
18 KiB
C
/*
|
|
* SuperH Mobile I2C Controller
|
|
*
|
|
* Copyright (C) 2008 Magnus Damm
|
|
*
|
|
* Portions of the code based on out-of-tree driver i2c-sh7343.c
|
|
* Copyright (c) 2006 Carlos Munoz <carlos@kenati.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
|
|
/* Transmit operation: */
|
|
/* */
|
|
/* 0 byte transmit */
|
|
/* BUS: S A8 ACK P */
|
|
/* IRQ: DTE WAIT */
|
|
/* ICIC: */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 */
|
|
/* */
|
|
/* 1 byte transmit */
|
|
/* BUS: S A8 ACK D8(1) ACK P */
|
|
/* IRQ: DTE WAIT WAIT */
|
|
/* ICIC: -DTE */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 D8(1) */
|
|
/* */
|
|
/* 2 byte transmit */
|
|
/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
|
|
/* IRQ: DTE WAIT WAIT WAIT */
|
|
/* ICIC: -DTE */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 D8(1) D8(2) */
|
|
/* */
|
|
/* 3 bytes or more, +---------+ gets repeated */
|
|
/* */
|
|
/* */
|
|
/* Receive operation: */
|
|
/* */
|
|
/* 0 byte receive - not supported since slave may hold SDA low */
|
|
/* */
|
|
/* 1 byte receive [TX] | [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK P */
|
|
/* IRQ: DTE WAIT | WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) */
|
|
/* */
|
|
/* 2 byte receive [TX]| [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
|
|
/* IRQ: DTE WAIT | WAIT WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) D8(2) */
|
|
/* */
|
|
/* 3 byte receive [TX] | [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
|
|
/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) D8(2) D8(3) */
|
|
/* */
|
|
/* 4 bytes or more, this part is repeated +---------+ */
|
|
/* */
|
|
/* */
|
|
/* Interrupt order and BUSY flag */
|
|
/* ___ _ */
|
|
/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
|
|
/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
|
|
/* */
|
|
/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
|
|
/* ___ */
|
|
/* WAIT IRQ ________________________________/ \___________ */
|
|
/* TACK IRQ ____________________________________/ \_______ */
|
|
/* DTE IRQ __________________________________________/ \_ */
|
|
/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
|
|
/* _______________________________________________ */
|
|
/* BUSY __/ \_ */
|
|
/* */
|
|
|
|
enum sh_mobile_i2c_op {
|
|
OP_START = 0,
|
|
OP_TX_FIRST,
|
|
OP_TX,
|
|
OP_TX_STOP,
|
|
OP_TX_TO_RX,
|
|
OP_RX,
|
|
OP_RX_STOP,
|
|
OP_RX_STOP_DATA,
|
|
};
|
|
|
|
struct sh_mobile_i2c_data {
|
|
struct device *dev;
|
|
void __iomem *reg;
|
|
struct i2c_adapter adap;
|
|
|
|
struct clk *clk;
|
|
u_int8_t iccl;
|
|
u_int8_t icch;
|
|
|
|
spinlock_t lock;
|
|
wait_queue_head_t wait;
|
|
struct i2c_msg *msg;
|
|
int pos;
|
|
int sr;
|
|
};
|
|
|
|
#define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */
|
|
|
|
/* Register offsets */
|
|
#define ICDR(pd) (pd->reg + 0x00)
|
|
#define ICCR(pd) (pd->reg + 0x04)
|
|
#define ICSR(pd) (pd->reg + 0x08)
|
|
#define ICIC(pd) (pd->reg + 0x0c)
|
|
#define ICCL(pd) (pd->reg + 0x10)
|
|
#define ICCH(pd) (pd->reg + 0x14)
|
|
|
|
/* Register bits */
|
|
#define ICCR_ICE 0x80
|
|
#define ICCR_RACK 0x40
|
|
#define ICCR_TRS 0x10
|
|
#define ICCR_BBSY 0x04
|
|
#define ICCR_SCP 0x01
|
|
|
|
#define ICSR_SCLM 0x80
|
|
#define ICSR_SDAM 0x40
|
|
#define SW_DONE 0x20
|
|
#define ICSR_BUSY 0x10
|
|
#define ICSR_AL 0x08
|
|
#define ICSR_TACK 0x04
|
|
#define ICSR_WAIT 0x02
|
|
#define ICSR_DTE 0x01
|
|
|
|
#define ICIC_ALE 0x08
|
|
#define ICIC_TACKE 0x04
|
|
#define ICIC_WAITE 0x02
|
|
#define ICIC_DTEE 0x01
|
|
|
|
static void activate_ch(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
/* Make sure the clock is enabled */
|
|
clk_enable(pd->clk);
|
|
|
|
/* Enable channel and configure rx ack */
|
|
iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
|
|
|
|
/* Mask all interrupts */
|
|
iowrite8(0, ICIC(pd));
|
|
|
|
/* Set the clock */
|
|
iowrite8(pd->iccl, ICCL(pd));
|
|
iowrite8(pd->icch, ICCH(pd));
|
|
}
|
|
|
|
static void deactivate_ch(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
/* Clear/disable interrupts */
|
|
iowrite8(0, ICSR(pd));
|
|
iowrite8(0, ICIC(pd));
|
|
|
|
/* Disable channel */
|
|
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
|
|
|
|
/* Disable clock */
|
|
clk_disable(pd->clk);
|
|
}
|
|
|
|
static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
|
|
enum sh_mobile_i2c_op op, unsigned char data)
|
|
{
|
|
unsigned char ret = 0;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data);
|
|
|
|
spin_lock_irqsave(&pd->lock, flags);
|
|
|
|
switch (op) {
|
|
case OP_START: /* issue start and trigger DTE interrupt */
|
|
iowrite8(0x94, ICCR(pd));
|
|
break;
|
|
case OP_TX_FIRST: /* disable DTE interrupt and write data */
|
|
iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
|
|
iowrite8(data, ICDR(pd));
|
|
break;
|
|
case OP_TX: /* write data */
|
|
iowrite8(data, ICDR(pd));
|
|
break;
|
|
case OP_TX_STOP: /* write data and issue a stop afterwards */
|
|
iowrite8(data, ICDR(pd));
|
|
iowrite8(0x90, ICCR(pd));
|
|
break;
|
|
case OP_TX_TO_RX: /* select read mode */
|
|
iowrite8(0x81, ICCR(pd));
|
|
break;
|
|
case OP_RX: /* just read data */
|
|
ret = ioread8(ICDR(pd));
|
|
break;
|
|
case OP_RX_STOP: /* enable DTE interrupt, issue stop */
|
|
iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
|
|
ICIC(pd));
|
|
iowrite8(0xc0, ICCR(pd));
|
|
break;
|
|
case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
|
|
iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
|
|
ICIC(pd));
|
|
ret = ioread8(ICDR(pd));
|
|
iowrite8(0xc0, ICCR(pd));
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pd->lock, flags);
|
|
|
|
dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
if (pd->pos == -1)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
if (pd->pos == (pd->msg->len - 1))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
|
|
unsigned char *buf)
|
|
{
|
|
switch (pd->pos) {
|
|
case -1:
|
|
*buf = (pd->msg->addr & 0x7f) << 1;
|
|
*buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
|
|
break;
|
|
default:
|
|
*buf = pd->msg->buf[pd->pos];
|
|
}
|
|
}
|
|
|
|
static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
unsigned char data;
|
|
|
|
if (pd->pos == pd->msg->len)
|
|
return 1;
|
|
|
|
sh_mobile_i2c_get_data(pd, &data);
|
|
|
|
if (sh_mobile_i2c_is_last_byte(pd))
|
|
i2c_op(pd, OP_TX_STOP, data);
|
|
else if (sh_mobile_i2c_is_first_byte(pd))
|
|
i2c_op(pd, OP_TX_FIRST, data);
|
|
else
|
|
i2c_op(pd, OP_TX, data);
|
|
|
|
pd->pos++;
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
unsigned char data;
|
|
int real_pos;
|
|
|
|
do {
|
|
if (pd->pos <= -1) {
|
|
sh_mobile_i2c_get_data(pd, &data);
|
|
|
|
if (sh_mobile_i2c_is_first_byte(pd))
|
|
i2c_op(pd, OP_TX_FIRST, data);
|
|
else
|
|
i2c_op(pd, OP_TX, data);
|
|
break;
|
|
}
|
|
|
|
if (pd->pos == 0) {
|
|
i2c_op(pd, OP_TX_TO_RX, 0);
|
|
break;
|
|
}
|
|
|
|
real_pos = pd->pos - 2;
|
|
|
|
if (pd->pos == pd->msg->len) {
|
|
if (real_pos < 0) {
|
|
i2c_op(pd, OP_RX_STOP, 0);
|
|
break;
|
|
}
|
|
data = i2c_op(pd, OP_RX_STOP_DATA, 0);
|
|
} else
|
|
data = i2c_op(pd, OP_RX, 0);
|
|
|
|
if (real_pos >= 0)
|
|
pd->msg->buf[real_pos] = data;
|
|
} while (0);
|
|
|
|
pd->pos++;
|
|
return pd->pos == (pd->msg->len + 2);
|
|
}
|
|
|
|
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
|
|
{
|
|
struct platform_device *dev = dev_id;
|
|
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
|
unsigned char sr;
|
|
int wakeup;
|
|
|
|
sr = ioread8(ICSR(pd));
|
|
pd->sr |= sr; /* remember state */
|
|
|
|
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
|
|
(pd->msg->flags & I2C_M_RD) ? "read" : "write",
|
|
pd->pos, pd->msg->len);
|
|
|
|
if (sr & (ICSR_AL | ICSR_TACK)) {
|
|
/* don't interrupt transaction - continue to issue stop */
|
|
iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
|
|
wakeup = 0;
|
|
} else if (pd->msg->flags & I2C_M_RD)
|
|
wakeup = sh_mobile_i2c_isr_rx(pd);
|
|
else
|
|
wakeup = sh_mobile_i2c_isr_tx(pd);
|
|
|
|
if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
|
|
iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
|
|
|
|
if (wakeup) {
|
|
pd->sr |= SW_DONE;
|
|
wake_up(&pd->wait);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
|
|
{
|
|
if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
|
|
dev_err(pd->dev, "Unsupported zero length i2c read\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Initialize channel registers */
|
|
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
|
|
|
|
/* Enable channel and configure rx ack */
|
|
iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
|
|
|
|
/* Set the clock */
|
|
iowrite8(pd->iccl, ICCL(pd));
|
|
iowrite8(pd->icch, ICCH(pd));
|
|
|
|
pd->msg = usr_msg;
|
|
pd->pos = -1;
|
|
pd->sr = 0;
|
|
|
|
/* Enable all interrupts to begin with */
|
|
iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
|
|
struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter);
|
|
struct i2c_msg *msg;
|
|
int err = 0;
|
|
u_int8_t val;
|
|
int i, k, retry_count;
|
|
|
|
activate_ch(pd);
|
|
|
|
/* Process all messages */
|
|
for (i = 0; i < num; i++) {
|
|
msg = &msgs[i];
|
|
|
|
err = start_ch(pd, msg);
|
|
if (err)
|
|
break;
|
|
|
|
i2c_op(pd, OP_START, 0);
|
|
|
|
/* The interrupt handler takes care of the rest... */
|
|
k = wait_event_timeout(pd->wait,
|
|
pd->sr & (ICSR_TACK | SW_DONE),
|
|
5 * HZ);
|
|
if (!k)
|
|
dev_err(pd->dev, "Transfer request timed out\n");
|
|
|
|
retry_count = 1000;
|
|
again:
|
|
val = ioread8(ICSR(pd));
|
|
|
|
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
|
|
|
|
/* the interrupt handler may wake us up before the
|
|
* transfer is finished, so poll the hardware
|
|
* until we're done.
|
|
*/
|
|
if (val & ICSR_BUSY) {
|
|
udelay(10);
|
|
if (retry_count--)
|
|
goto again;
|
|
|
|
err = -EIO;
|
|
dev_err(pd->dev, "Polling timed out\n");
|
|
break;
|
|
}
|
|
|
|
/* handle missing acknowledge and arbitration lost */
|
|
if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
|
|
err = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
|
|
deactivate_ch(pd);
|
|
|
|
if (!err)
|
|
err = num;
|
|
return err;
|
|
}
|
|
|
|
static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static struct i2c_algorithm sh_mobile_i2c_algorithm = {
|
|
.functionality = sh_mobile_i2c_func,
|
|
.master_xfer = sh_mobile_i2c_xfer,
|
|
};
|
|
|
|
static void sh_mobile_i2c_setup_channel(struct platform_device *dev)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
|
unsigned long peripheral_clk = clk_get_rate(pd->clk);
|
|
u_int32_t num;
|
|
u_int32_t denom;
|
|
u_int32_t tmp;
|
|
|
|
spin_lock_init(&pd->lock);
|
|
init_waitqueue_head(&pd->wait);
|
|
|
|
/* Calculate the value for iccl. From the data sheet:
|
|
* iccl = (p clock / transfer rate) * (L / (L + H))
|
|
* where L and H are the SCL low/high ratio (5/4 in this case).
|
|
* We also round off the result.
|
|
*/
|
|
num = peripheral_clk * 5;
|
|
denom = NORMAL_SPEED * 9;
|
|
tmp = num * 10 / denom;
|
|
if (tmp % 10 >= 5)
|
|
pd->iccl = (u_int8_t)((num/denom) + 1);
|
|
else
|
|
pd->iccl = (u_int8_t)(num/denom);
|
|
|
|
/* Calculate the value for icch. From the data sheet:
|
|
icch = (p clock / transfer rate) * (H / (L + H)) */
|
|
num = peripheral_clk * 4;
|
|
tmp = num * 10 / denom;
|
|
if (tmp % 10 >= 5)
|
|
pd->icch = (u_int8_t)((num/denom) + 1);
|
|
else
|
|
pd->icch = (u_int8_t)(num/denom);
|
|
}
|
|
|
|
static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
|
|
{
|
|
struct resource *res;
|
|
int ret = -ENXIO;
|
|
int q, m;
|
|
int k = 0;
|
|
int n = 0;
|
|
|
|
while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
|
|
for (n = res->start; hook && n <= res->end; n++) {
|
|
if (request_irq(n, sh_mobile_i2c_isr, IRQF_DISABLED,
|
|
dev->dev.bus_id, dev))
|
|
goto rollback;
|
|
}
|
|
k++;
|
|
}
|
|
|
|
if (hook)
|
|
return k > 0 ? 0 : -ENOENT;
|
|
|
|
k--;
|
|
ret = 0;
|
|
|
|
rollback:
|
|
for (q = k; k >= 0; k--) {
|
|
for (m = n; m >= res->start; m--)
|
|
free_irq(m, dev);
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_IRQ, k - 1);
|
|
m = res->end;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mobile_i2c_probe(struct platform_device *dev)
|
|
{
|
|
struct sh_mobile_i2c_data *pd;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
int size;
|
|
int ret;
|
|
|
|
pd = kzalloc(sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
|
|
if (pd == NULL) {
|
|
dev_err(&dev->dev, "cannot allocate private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pd->clk = clk_get(&dev->dev, "peripheral_clk");
|
|
if (IS_ERR(pd->clk)) {
|
|
dev_err(&dev->dev, "cannot get peripheral clock\n");
|
|
ret = PTR_ERR(pd->clk);
|
|
goto err;
|
|
}
|
|
|
|
ret = sh_mobile_i2c_hook_irqs(dev, 1);
|
|
if (ret) {
|
|
dev_err(&dev->dev, "cannot request IRQ\n");
|
|
goto err_clk;
|
|
}
|
|
|
|
pd->dev = &dev->dev;
|
|
platform_set_drvdata(dev, pd);
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&dev->dev, "cannot find IO resource\n");
|
|
ret = -ENOENT;
|
|
goto err_irq;
|
|
}
|
|
|
|
size = (res->end - res->start) + 1;
|
|
|
|
pd->reg = ioremap(res->start, size);
|
|
if (pd->reg == NULL) {
|
|
dev_err(&dev->dev, "cannot map IO\n");
|
|
ret = -ENXIO;
|
|
goto err_irq;
|
|
}
|
|
|
|
/* setup the private data */
|
|
adap = &pd->adap;
|
|
i2c_set_adapdata(adap, pd);
|
|
|
|
adap->owner = THIS_MODULE;
|
|
adap->algo = &sh_mobile_i2c_algorithm;
|
|
adap->dev.parent = &dev->dev;
|
|
adap->retries = 5;
|
|
adap->nr = dev->id;
|
|
|
|
strlcpy(adap->name, dev->name, sizeof(adap->name));
|
|
|
|
sh_mobile_i2c_setup_channel(dev);
|
|
|
|
ret = i2c_add_numbered_adapter(adap);
|
|
if (ret < 0) {
|
|
dev_err(&dev->dev, "cannot add numbered adapter\n");
|
|
goto err_all;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_all:
|
|
iounmap(pd->reg);
|
|
err_irq:
|
|
sh_mobile_i2c_hook_irqs(dev, 0);
|
|
err_clk:
|
|
clk_put(pd->clk);
|
|
err:
|
|
kfree(pd);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mobile_i2c_remove(struct platform_device *dev)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&pd->adap);
|
|
iounmap(pd->reg);
|
|
sh_mobile_i2c_hook_irqs(dev, 0);
|
|
clk_put(pd->clk);
|
|
kfree(pd);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sh_mobile_i2c_driver = {
|
|
.driver = {
|
|
.name = "i2c-sh_mobile",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = sh_mobile_i2c_probe,
|
|
.remove = sh_mobile_i2c_remove,
|
|
};
|
|
|
|
static int __init sh_mobile_i2c_adap_init(void)
|
|
{
|
|
return platform_driver_register(&sh_mobile_i2c_driver);
|
|
}
|
|
|
|
static void __exit sh_mobile_i2c_adap_exit(void)
|
|
{
|
|
platform_driver_unregister(&sh_mobile_i2c_driver);
|
|
}
|
|
|
|
module_init(sh_mobile_i2c_adap_init);
|
|
module_exit(sh_mobile_i2c_adap_exit);
|
|
|
|
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
|
|
MODULE_AUTHOR("Magnus Damm");
|
|
MODULE_LICENSE("GPL v2");
|