..
accel
staging:iio:accel:sca3000 Move out of staging.
2016-10-23 19:34:07 +01:00
adc
iio: adc: ti-adc161s626: add regulator support
2016-09-27 20:33:03 +01:00
amplifiers
buffer
iio: add resource managed triggered buffer init helpers
2016-09-04 15:42:46 +01:00
chemical
Second set of iio new device support, features and cleanups for the 4.9 cycle.
2016-09-14 20:42:03 +02:00
common
Second set of iio new device support, features and cleanups for the 4.9 cycle.
2016-09-14 20:42:03 +02:00
counter
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
dac
iio: dac: mcp4725: support voltage reference selection
2016-10-23 19:34:23 +01:00
dummy
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
frequency
iio: frequency: ad9523: use unsigned int rather then bare unsigned
2016-04-17 10:31:03 +01:00
gyro
iio: common: ssp_sensors: gyro: constify iio_info structures
2016-09-18 11:59:51 +01:00
health
First round of IIO new device support, features and cleanups for the 4.8 cycle.
2016-06-09 09:15:58 -07:00
humidity
iio: humidity: add support to hts221 rh/temp combo device
2016-10-23 19:34:09 +01:00
imu
iio: bmi160_core: Fix sparse warning due to incorrect type in assignment
2016-10-23 19:33:44 +01:00
light
iio: light: ltr501: claim direct mode during raw writes
2016-10-23 19:34:08 +01:00
magnetometer
iio: magnetometer: ak8974: small endianness fixes
2016-10-03 21:30:00 +01:00
orientation
potentiometer
iio: potentiometer: Fix typo in Kconfig
2016-07-03 12:40:01 +01:00
potentiostat
iio: potentiostat: add LMP91000 support
2016-09-27 20:33:03 +01:00
pressure
iio: pressure: mpl3115: claim direct mode during raw reads
2016-10-23 19:33:55 +01:00
proximity
Second set of iio new device support, features and cleanups for the 4.9 cycle.
2016-09-14 20:42:03 +02:00
temperature
iio: temperature: fix non static symbol warnings
2016-08-29 19:49:00 +01:00
trigger
iio:trigger: Experimental kthread tight loop trigger (thread only)
2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
industrialio-buffer.c
iio: Use kmalloc_array() in iio_scan_mask_set()
2016-09-24 16:35:24 +01:00
industrialio-configfs.c
industrialio-core.c
iio: Implement counter channel type and info constants
2016-10-01 17:06:02 +01:00
industrialio-event.c
iio: iio_push_event(): Don't crash if the event interface is not registered
2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c
iio:trigger: Add helper function to verify that a trigger belongs to the same device
2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
inkern.c
iio: inkern: add iio_read_channel_offset helper
2016-09-27 20:33:02 +01:00
Kconfig
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
Makefile
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00