FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2025-02-14 00:13:53 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-pxa
History
Jonathan McDowell 2a23ec3679 [ARM] pxa: balloon3 (http://balloonboard.org/) base machine support 
So, again against latest pxa-linux-2.6/devel, with the following
changes:

 * Move to __raw_readl/__raw_writel for FPGA/CPLD register access
 * Change Toppoly LCD config to be selectable at run time rather than
   compile time.
 * Remove currently unused irq device suspend/resume functions.
 * Strip out unnecessary/duplicated #includes.
 * Some code style cleanups.

Balloon3 (http://balloonboard.org/) base machine support

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:39 +08:00
..
include/mach
[ARM] pxa: balloon3 (http://balloonboard.org/) base machine support
2009-09-10 18:49:39 +08:00
am200epd.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
am300epd.c
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
2009-02-10 11:28:00 +00:00
balloon3.c
[ARM] pxa: balloon3 (http://balloonboard.org/) base machine support
2009-09-10 18:49:39 +08:00
clock.c
[ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c
2009-06-04 17:45:43 +01:00
clock.h
[ARM] pxa: remove left-over struct clk *other field from struct clk
2009-09-10 18:49:23 +08:00
cm-x2xx-pci.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
cm-x2xx-pci.h
…
cm-x2xx.c
[ARM] pxa/cm-x2xx: fix ucb1400 not being registered
2009-04-04 10:26:34 +08:00
cm-x255.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
cm-x270.c
[ARM] pxa/cm-x270: add libertas device registration
2009-09-10 18:49:34 +08:00
cm-x300.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
colibri-pxa3xx.c
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
2009-09-10 18:49:31 +08:00
colibri-pxa270.c
[ARM] pxa: rename colibri.c to colibri-pxa270.c
2009-03-23 09:57:54 +08:00
colibri-pxa300.c
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
2009-09-10 18:49:31 +08:00
colibri-pxa320.c
[ARM] pxa/colibri: add UART MFP configuration for the PXA320 module
2009-09-10 18:49:31 +08:00
corgi_lcd.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
corgi_pm.c
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
2009-06-11 22:20:42 +08:00
corgi_ssp.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
corgi.c
[ARM] pxa/corgi: make use of GPIO based matrix keypad driver
2009-09-10 18:49:37 +08:00
cpufreq-pxa2xx.c
[ARM] pxa: add vcc_core regulation for cpufreq on pxa2xx
2009-06-05 10:33:07 +08:00
cpufreq-pxa3xx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
csb701.c
[ARM] pxa/csb701: do not register devices on non-csb726 boads
2009-04-04 10:26:35 +08:00
csb726.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
devices.c
[ARM] pxa: add device definition for graphics controller
2009-09-10 18:49:27 +08:00
devices.h
[ARM] pxa: add device definition for graphics controller
2009-09-10 18:49:27 +08:00
e330.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e350.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e400.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e740.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
e750.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
e800.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
em-x270.c
[ARM] pxa/em-x270: add vcc_core regulator
2009-09-10 18:49:34 +08:00
eseries.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
eseries.h
…
ezx.c
[ARM] pxa/ezx: setup gpio-keys for EzX phones
2009-06-05 10:50:22 +08:00
generic.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
generic.h
[ARM] pxa: add missing declaration of pxa26x_init_irq()
2009-04-13 12:10:36 +08:00
gumstix.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
h5000.c
Merge branch 'origin' into devel
2009-03-28 20:29:51 +00:00
himalaya.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
hx4700.c
[ARM] pxa/hx4700: use platform_lcd driver
2009-09-10 18:49:37 +08:00
idp.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
imote2.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
irq.c
[ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling
2009-09-10 18:49:26 +08:00
Kconfig
[ARM] pxa: balloon3 (http://balloonboard.org/) base machine support
2009-09-10 18:49:39 +08:00
leds-idp.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-lubbock.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-mainstone.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds.c
…
leds.h
…
littleton.c
[ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmc
2009-09-10 18:49:30 +08:00
lpd270.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
lubbock.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
magician.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
mainstone.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
Makefile
[ARM] pxa: balloon3 (http://balloonboard.org/) base machine support
2009-09-10 18:49:39 +08:00
Makefile.boot
…
mfp-pxa2xx.c
[ARM] pxa: enable GPIO receivers after configuring pins
2009-05-18 21:52:09 +08:00
mfp-pxa3xx.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mioa701_bootresume.S
…
mioa701.c
[ARM] pxa/mioa701: convert mioa701 to the new platform-device soc-camera interface
2009-09-10 18:49:32 +08:00
mp900.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
palmld.c
[ARM] pxa/palm: Add NOR flash support for PalmLD
2009-09-10 18:49:35 +08:00
palmt5.c
[ARM] pxa/palm: add detect_delay to mmc for PalmTX,T5,LD
2009-09-10 18:49:34 +08:00
palmtc.c
[ARM] pxa: Palm Tungsten|C initial support
2009-09-10 18:49:36 +08:00
palmte2.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
palmtx.c
[ARM] pxa/palm: Add NOR Flash support for PalmTX
2009-09-10 18:49:35 +08:00
palmz72.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
pcm027.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pcm990-baseboard.c
[ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device
2009-09-10 18:49:31 +08:00
pm.c
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
2009-06-11 23:25:09 +08:00
poodle.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
pxa2xx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa3xx.c
[ARM] pxa: correct I2CPWR clock for pxa3xx
2009-07-03 14:13:49 +08:00
pxa25x.c
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
2009-03-09 21:22:37 +08:00
pxa27x.c
[ARM] pxa: add ability to set suspend mode
2009-06-05 10:32:48 +08:00
pxa300.c
[ARM] pxa: add clock definition for graphics controller
2009-09-10 18:49:26 +08:00
pxa320.c
[ARM] pxa: add clock definition for graphics controller
2009-09-10 18:49:26 +08:00
pxa930.c
[ARM] pxa: support mfp of pxa935
2009-09-10 18:49:24 +08:00
reset.c
[ARM] pxa: allow gpio_reset drive high during normal work
2009-05-18 21:52:09 +08:00
saar.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
sharpsl_pm.c
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
2009-06-11 23:25:09 +08:00
sharpsl.h
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
2009-06-11 22:20:42 +08:00
sleep.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
smemc.c
…
spitz_pm.c
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
2009-06-11 22:20:42 +08:00
spitz.c
[ARM] pxa/spitz: make use of GPIO based matrix keypad driver
2009-09-10 18:49:37 +08:00
ssp.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
standby.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
stargate2.c
[ARM] pxa: Stargate 2 board support
2009-06-05 10:46:17 +08:00
tavorevb.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
time.c
clocksource: pass clocksource to read() callback
2009-04-21 13:41:47 -07:00
tosa-bt.c
rfkill: rewrite
2009-06-03 14:06:13 -04:00
tosa.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
treo680.c
[ARM] pxa/treo680: move LCD power GPIO to proper place
2009-09-10 18:49:38 +08:00
trizeps4.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00
viper.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
xcep.c
[ARM] pxa: add support for the IskraTel XCEP board
2009-09-10 18:49:38 +08:00
zylonite_pxa300.c
[ARM] pxa: fix gpio issue in zylonite
2009-07-18 10:00:08 +08:00
zylonite_pxa320.c
[ARM] pxa: fix gpio issue in zylonite
2009-07-18 10:00:08 +08:00
zylonite.c
[ARM] pxa: factor pxamci gpio handling
2009-09-10 18:49:30 +08:00