Alan Stern c73cee717e USB: EHCI: remove ehci_port_power() routine ... This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2012-10-31 12:48:07 -07:00
..
clock.c	MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs	2012-10-01 11:37:15 +02:00
common.c	MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set}	2012-05-15 17:49:09 +02:00
common.h	MIPS: ath79: add GPIOLIB support	2011-01-18 19:30:25 +01:00
dev-common.c	MIPS: ath79: register UART device for AR934X SoCs	2012-05-15 17:49:10 +02:00
dev-common.h	MIPS: ath79: add common watchdog device	2011-01-18 19:30:26 +01:00
dev-gpio-buttons.c	MIPS: ath79: Use kmemdup rather than duplicating its implementation	2012-05-15 17:49:00 +02:00
dev-gpio-buttons.h	MIPS: ath79: add common GPIO buttons device	2011-01-18 19:30:27 +01:00
dev-leds-gpio.c	MIPS: ath79: Use kmemdup rather than duplicating its implementation	2012-05-15 17:49:00 +02:00
dev-leds-gpio.h	MIPS: ath79: add common GPIO LEDs device	2011-01-18 19:30:26 +01:00
dev-spi.c	MIPS: ath79: add common SPI controller device	2011-01-18 19:30:27 +01:00
dev-spi.h	MIPS: ath79: add common SPI controller device	2011-01-18 19:30:27 +01:00
dev-usb.c	USB: EHCI: remove ehci_port_power() routine	2012-10-31 12:48:07 -07:00
dev-usb.h	MIPS: ath79: add common USB Host Controller device	2011-12-07 22:02:44 +00:00
dev-wmac.c	MIPS: ath79: add WMAC registration code for AR934X	2012-05-15 17:49:10 +02:00
dev-wmac.h	MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h	2011-12-07 22:02:48 +00:00
early_printk.c	MIPS: ath79: add early_printk support for AR934X	2012-05-15 17:49:07 +02:00
gpio.c	MIPS: ath79: Fix number of GPIO lines for AR724[12]	2012-08-17 10:57:26 +02:00
irq.c	MIPS: ath79: add IRQ handling code for AR934X	2012-05-15 17:49:09 +02:00
Kconfig	MIPS: ath79: add initial support for the Atheros DB120 board	2012-05-15 17:49:11 +02:00
mach-ap81.c	MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h	2011-12-07 22:02:48 +00:00
mach-ap121.c	MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h	2011-12-07 22:02:48 +00:00
mach-db120.c	MIPS: ath79: register USB host controller on the DB120 board	2012-08-28 12:29:57 +02:00
mach-pb44.c	MIPS: ath79: register PCI controller on the PB44 board	2012-05-15 17:49:06 +02:00
mach-ubnt-xm.c	MIPS: ath79: remove ar724x_pci_add_data function	2012-05-15 17:49:06 +02:00
machtypes.h	MIPS: ath79: add initial support for the Atheros DB120 board	2012-05-15 17:49:11 +02:00
Makefile	MIPS: ath79: add initial support for the Atheros DB120 board	2012-05-15 17:49:11 +02:00
pci.c	MIPS: ath79: add PCI registration code for AR934X	2012-05-15 17:49:11 +02:00
pci.h	MIPS: ath79: update copyright headers of PCI related files	2012-05-15 17:49:07 +02:00
Platform	MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs	2011-01-18 19:30:24 +01:00
prom.c	MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs	2011-01-18 19:30:24 +01:00
setup.c	MIPS: ath79: add SoC detection code for AR934X	2012-05-15 17:49:07 +02:00