mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-24 10:28:57 +00:00
ad68bb9f7a
This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well. Also, various places in the kernel had to be patched to use __raw_read/__raw_write. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
211 lines
4.3 KiB
C
211 lines
4.3 KiB
C
/*
|
|
* Hardware definitions for HP iPAQ h5xxx Handheld Computers
|
|
*
|
|
* Copyright 2000-2003 Hewlett-Packard Company.
|
|
* Copyright 2002 Jamey Hicks <jamey.hicks@hp.com>
|
|
* Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
|
|
* Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
|
|
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
|
|
* FITNESS FOR ANY PARTICULAR PURPOSE.
|
|
*
|
|
* Author: Jamey Hicks.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/pxa25x.h>
|
|
#include <mach/h5000.h>
|
|
#include <mach/udc.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
/*
|
|
* Flash
|
|
*/
|
|
|
|
static struct mtd_partition h5000_flash0_partitions[] = {
|
|
{
|
|
.name = "bootldr",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "root",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition h5000_flash1_partitions[] = {
|
|
{
|
|
.name = "second root",
|
|
.size = SZ_16M - 0x00040000,
|
|
.offset = 0,
|
|
},
|
|
{
|
|
.name = "asset",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data h5000_flash0_data = {
|
|
.width = 4,
|
|
.parts = h5000_flash0_partitions,
|
|
.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
|
|
};
|
|
|
|
static struct physmap_flash_data h5000_flash1_data = {
|
|
.width = 4,
|
|
.parts = h5000_flash1_partitions,
|
|
.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
|
|
};
|
|
|
|
static struct resource h5000_flash0_resources = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
};
|
|
|
|
static struct resource h5000_flash1_resources = {
|
|
.start = PXA_CS0_PHYS + SZ_32M,
|
|
.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
};
|
|
|
|
static struct platform_device h5000_flash[] = {
|
|
{
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.resource = &h5000_flash0_resources,
|
|
.num_resources = 1,
|
|
.dev = {
|
|
.platform_data = &h5000_flash0_data,
|
|
},
|
|
},
|
|
{
|
|
.name = "physmap-flash",
|
|
.id = 1,
|
|
.resource = &h5000_flash1_resources,
|
|
.num_resources = 1,
|
|
.dev = {
|
|
.platform_data = &h5000_flash1_data,
|
|
},
|
|
},
|
|
};
|
|
|
|
/*
|
|
* USB Device Controller
|
|
*/
|
|
|
|
static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
|
|
.gpio_pullup = H5000_GPIO_USB_PULLUP,
|
|
};
|
|
|
|
/*
|
|
* GPIO setup
|
|
*/
|
|
|
|
static unsigned long h5000_pin_config[] __initdata = {
|
|
/* Crystal and Clock Signals */
|
|
GPIO12_32KHz,
|
|
|
|
/* SDRAM and Static Memory I/O Signals */
|
|
GPIO15_nCS_1,
|
|
GPIO78_nCS_2,
|
|
GPIO79_nCS_3,
|
|
GPIO80_nCS_4,
|
|
|
|
/* FFUART */
|
|
GPIO34_FFUART_RXD,
|
|
GPIO35_FFUART_CTS,
|
|
GPIO36_FFUART_DCD,
|
|
GPIO37_FFUART_DSR,
|
|
GPIO38_FFUART_RI,
|
|
GPIO39_FFUART_TXD,
|
|
GPIO40_FFUART_DTR,
|
|
GPIO41_FFUART_RTS,
|
|
|
|
/* BTUART */
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* SSP1 */
|
|
GPIO23_SSP1_SCLK,
|
|
GPIO25_SSP1_TXD,
|
|
GPIO26_SSP1_RXD,
|
|
|
|
/* I2S */
|
|
GPIO28_I2S_BITCLK_OUT,
|
|
GPIO29_I2S_SDATA_IN,
|
|
GPIO30_I2S_SDATA_OUT,
|
|
GPIO31_I2S_SYNC,
|
|
GPIO32_I2S_SYSCLK,
|
|
};
|
|
|
|
/*
|
|
* Localbus setup:
|
|
* CS0: Flash;
|
|
* CS1: MediaQ chip, select 16-bit bus and vlio;
|
|
* CS5: SAMCOP.
|
|
*/
|
|
|
|
static void fix_msc(void)
|
|
{
|
|
__raw_writel(0x129c24f2, MSC0);
|
|
__raw_writel(0x7ff424fa, MSC1);
|
|
__raw_writel(0x7ff47ff4, MSC2);
|
|
|
|
__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
|
|
}
|
|
|
|
/*
|
|
* Platform devices
|
|
*/
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&h5000_flash[0],
|
|
&h5000_flash[1],
|
|
};
|
|
|
|
static void __init h5000_init(void)
|
|
{
|
|
fix_msc();
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
pxa_set_udc_info(&h5000_udc_mach_info);
|
|
platform_add_devices(ARRAY_AND_SIZE(devices));
|
|
}
|
|
|
|
MACHINE_START(H5400, "HP iPAQ H5000")
|
|
.boot_params = 0xa0000100,
|
|
.map_io = pxa25x_map_io,
|
|
.init_irq = pxa25x_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = h5000_init,
|
|
MACHINE_END
|