Ricardo Martins 776abac817 [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error ...

Compilation for this board yields the following errors:

arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function)
arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function)
arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function)

Fix them by including the necessary header.

Signed-off-by: Ricardo Martins <rasm@fe.up.pt>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2009-05-16 19:55:56 +01:00

..

include/mach

[ARM] pxa/palm27x: General fix for Palm27x aSoC driver

2009-04-19 21:56:54 +08:00

am200epd.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

am300epd.c

[ARM] 5354/1: mach-pxa: add AM300 platform driver v3

2009-02-10 11:28:00 +00:00

clock.c

[ARM] pxa: make second argument of clk_add_alias a name instead of the device

2009-03-19 16:20:39 +08:00

clock.h

[ARM] pxa: make second argument of clk_add_alias a name instead of the device

2009-03-19 16:20:39 +08:00

cm-x2xx-pci.c

[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

2009-03-09 21:22:38 +08:00

cm-x2xx-pci.h

…

cm-x2xx.c

[ARM] pxa/cm-x2xx: fix ucb1400 not being registered

2009-04-04 10:26:34 +08:00

cm-x255.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

cm-x270.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

cm-x300.c

[ARM] pxa: add DM9000_PLATF_NO_EEPROM flag to CM-X... platforms

2009-03-09 21:22:40 +08:00

colibri-pxa3xx.c

[ARM] pxa/colibri: provide MAC address from ATAG_SERIAL

2009-04-04 10:26:34 +08:00

colibri-pxa270.c

[ARM] pxa: rename colibri.c to colibri-pxa270.c

2009-03-23 09:57:54 +08:00

colibri-pxa300.c

[ARM] pxa/colibri: get rid of set_irq_type()

2009-04-04 10:26:34 +08:00

colibri-pxa320.c

[ARM] pxa/colibri: get rid of set_irq_type()

2009-04-04 10:26:34 +08:00

corgi_lcd.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

corgi_pm.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

corgi_ssp.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

corgi.c

[ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC

2009-04-27 11:45:53 +08:00

cpufreq-pxa2xx.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

cpufreq-pxa3xx.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

csb701.c

[ARM] pxa/csb701: do not register devices on non-csb726 boads

2009-04-04 10:26:35 +08:00

csb726.c

[ARM] pxa: add initial support for Cogent CSB726 board

2009-03-13 17:10:44 +08:00

devices.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

devices.h

…

e330.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

e350.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

e400.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

e740.c

[ARM] pxa: register AC97 controller devices

2009-04-04 21:54:40 +08:00

e750.c

[ARM] pxa: register AC97 controller devices

2009-04-04 21:54:40 +08:00

e800.c

[ARM] pxa: register AC97 controller devices

2009-04-04 21:54:40 +08:00

em-x270.c

[ARM] pxa/em-x270: remove duplicated #include

2009-04-14 22:55:36 +08:00

eseries.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

eseries.h

[ARM] pxa: Add multi-io support for e-series

2008-12-15 03:29:34 +00:00

ezx.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

generic.c

[ARM] pxa: move GPIO register definitions into <mach/gpio.h>

2009-03-09 21:22:37 +08:00

generic.h

[ARM] pxa: add missing declaration of pxa26x_init_irq()

2009-04-13 12:10:36 +08:00

gumstix.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

h5000.c

Merge branch 'origin' into devel

2009-03-28 20:29:51 +00:00

himalaya.c

[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

2009-03-09 21:22:38 +08:00

idp.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

imote2.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

irq.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

Kconfig

[ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930".

2009-05-03 10:58:31 +01:00

leds-idp.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

leds-lubbock.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

leds-mainstone.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

leds.c

…

leds.h

…

littleton.c

[ARM] pxa/littleton: add missing da9034 touchscreen support

2009-04-27 11:46:56 +08:00

lpd270.c

[ARM] pxa: move GPIO register definitions into <mach/gpio.h>

2009-03-09 21:22:37 +08:00

lubbock.c

[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c

2009-03-09 21:22:40 +08:00

magician.c

Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6

2009-04-06 09:57:38 +01:00

mainstone.c

[ARM] pxa: move GPIO register definitions into <mach/gpio.h>

2009-03-09 21:22:37 +08:00

Makefile

[ARM] pxa: Palm Tungsten E2 basic support

2009-04-04 10:26:33 +08:00

Makefile.boot

…

mfp-pxa2xx.c

[ARM] pxa: access GPIO registers by chip so to make it further generic

2009-03-09 21:22:38 +08:00

mfp-pxa3xx.c

[ARM] pxa: move common MFP handling code into plat-pxa

2009-03-23 10:11:34 +08:00

mioa701_bootresume.S

…

mioa701.c

[ARM] pxa/mioa701: use GPIO95 as AC97 reset line

2009-04-15 10:54:06 +08:00

mp900.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

palmld.c

[ARM] pxa/palm27x: General fix for Palm27x aSoC driver

2009-04-19 21:56:54 +08:00

palmt5.c

[ARM] pxa/palm27x: General fix for Palm27x aSoC driver

2009-04-19 21:56:54 +08:00

palmte2.c

[ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight

2009-04-04 10:26:33 +08:00

palmtx.c

[ARM] pxa/palm27x: General fix for Palm27x aSoC driver

2009-04-19 21:56:54 +08:00

palmz72.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

pcm027.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

pcm990-baseboard.c

[ARM] pxa/pcm990: start external GPIOs immediately after built-in ones

2009-04-19 21:57:10 +08:00

pm.c

[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c

2009-03-09 21:22:40 +08:00

poodle.c

[ARM] pass reboot command line to arch_reset()

2009-03-19 16:20:24 +00:00

pwm.c

[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

2009-03-09 21:22:38 +08:00

pxa2xx.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

pxa3xx.c

[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c

2009-03-09 21:22:37 +08:00

pxa25x.c

[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c

2009-03-09 21:22:37 +08:00

pxa27x.c

[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c

2009-03-09 21:22:37 +08:00

pxa300.c

[ARM] pxa: move common MFP handling code into plat-pxa

2009-03-23 10:11:34 +08:00

pxa320.c

[ARM] pxa: move common MFP handling code into plat-pxa

2009-03-23 10:11:34 +08:00

pxa930.c

[ARM] pxa: move common MFP handling code into plat-pxa

2009-03-23 10:11:34 +08:00

reset.c

[ARM] pass reboot command line to arch_reset()

2009-03-19 16:20:24 +00:00

saar.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

sharpsl_pm.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

sharpsl.h

…

sleep.S

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

smemc.c

…

spitz_pm.c

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

spitz.c

[ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC

2009-04-27 11:45:53 +08:00

ssp.c

[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

2009-03-09 21:22:38 +08:00

standby.S

[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

2009-03-09 21:22:40 +08:00

tavorevb.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

time.c

clocksource: pass clocksource to read() callback

2009-04-21 13:41:47 -07:00

tosa-bt.c

…

tosa.c

[ARM] pxa: register AC97 controller devices

2009-04-04 21:54:40 +08:00

trizeps4.c

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

2009-03-09 21:22:36 +08:00

viper.c

[ARM] 5513/1: Eurotech VIPER SBC: fix compilation error

2009-05-16 19:55:56 +01:00

zylonite_pxa300.c

[ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders

2009-04-27 11:46:38 +08:00

zylonite_pxa320.c

[ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working

2009-04-27 11:46:30 +08:00

zylonite.c

…