Bruce Allan 605c82bab5 e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ... For non-managed versions of 82579, set the bit that prevents the hardware from automatically configuring the PHY after resets only when the driver performs a reset, clear the bit after resets. This is so the hardware can configure the PHY automatically when the part is reset in a manner that is not controlled by the driver (e.g. in a virtual environment via PCI FLR) otherwise the PHY will be mis-configured causing issues such as failing to link at 1000Mbps. For managed versions of 82579, keep the previous behavior since the manageability firmware will handle the PHY configuration. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2010-09-22 20:41:21 -07:00
..
82571.c	e1000e: don't check for alternate MAC addr on parts that don't support it	2010-08-19 15:48:52 -07:00
defines.h	e1000e: don't check for alternate MAC addr on parts that don't support it	2010-08-19 15:48:52 -07:00
e1000.h
es2lan.c
ethtool.c
hw.h	e1000e: 82579 unaccounted missed packets	2010-09-22 20:41:20 -07:00
ich8lan.c	e1000e: 82579 do not gate auto config of PHY by hardware during nominal use	2010-09-22 20:41:21 -07:00
lib.c	e1000e: don't check for alternate MAC addr on parts that don't support it	2010-08-19 15:48:52 -07:00
Makefile
netdev.c	e1000e: 82579 jumbo frame workaround causing CRC errors	2010-09-22 20:41:20 -07:00
param.c
phy.c