linux/Documentation/arm
Henrik Austad 3cf8ca1c25 Documentation/: update 00-INDEX files
Some of the 00-INDEX files are somewhat outdated and some folders does
not contain 00-INDEX at all.  Only outdated (with the notably exception
of spi) indexes are touched here, the 169 folders without 00-INDEX has
not been touched.

New 00-INDEX
 - spi/* was added in a series of commits dating back to 2006

Added files (missing in (*/)00-INDEX)
 - dmatest.txt was added by commit 851b7e16a0 ("dmatest: run test via
   debugfs")
 - this_cpu_ops.txt was added by commit a1b2a555d6 ("percpu: add
   documentation on this_cpu operations")
 - ww-mutex-design.txt was added by commit 040a0a3710 ("mutex: Add
   support for wound/wait style locks")
 - bcache.txt was added by commit cafe563591 ("bcache: A block layer
   cache")
 - kernel-per-CPU-kthreads.txt was added by commit 49717cb404
   ("kthread: Document ways of reducing OS jitter due to per-CPU
   kthreads")
 - phy.txt was added by commit ff76496347 ("drivers: phy: add generic
   PHY framework")
 - block/null_blk was added by commit 12f8f4fc03 ("null_blk:
   documentation")
 - module-signing.txt was added by commit 3cafea3076 ("Add
   Documentation/module-signing.txt file")
 - assoc_array.txt was added by commit 3cb989501c ("Add a generic
   associative array implementation.")
 - arm/IXP4xx was part of the initial repo
 - arm/cluster-pm-race-avoidance.txt was added by commit 7fe31d28e8
   ("ARM: mcpm: introduce helpers for platform coherency exit/setup")
 - arm/firmware.txt was added by commit 7366b92a77 ("ARM: Add
   interface for registering and calling firmware-specific operations")
 - arm/kernel_mode_neon.txt was added by commit 2afd0a0524 ("ARM:
   7825/1: document the use of NEON in kernel mode")
 - arm/tcm.txt was added by commit bc581770cf ("ARM: 5580/2: ARM TCM
   (Tightly-Coupled Memory) support v3")
 - arm/vlocks.txt was added by commit 9762f12d3e ("ARM: mcpm: Add
   baremetal voting mutexes")
 - blackfin/gptimers-example.c, Makefile was added by commit
   4b60779d5e ("Blackfin: add an example showing how to use the
   gptimers API")
 - devicetree/usage-model.txt was added by commit 31134efc68 ("dt:
   Linux DT usage model documentation")
 - fb/api.txt was added by commit fb21c2f428 ("fbdev: Add FOURCC-based
   format configuration API")
 - fb/sm501.txt was added by commit e6a0498071 ("video, sm501: add
   edid and commandline support")
 - fb/udlfb.txt was added by commit 96f8d864af ("fbdev: move udlfb out
   of staging.")
 - filesystems/Makefile was added by commit 1e0051ae48
   ("Documentation/fs/: split txt and source files")
 - filesystems/nfs/nfsd-admin-interfaces.txt was added by commit
   8a4c6e19cf ("nfsd: document kernel interfaces for nfsd
   configuration")
 - ide/warm-plug-howto.txt was added by commit f74c91413e ("ide: add
   warm-plug support for IDE devices (take 2)")
 - laptops/Makefile was added by commit d49129accc
   ("Documentation/laptop/: split txt and source files")
 - leds/leds-blinkm.txt was added by commit b54cf35a7f ("LEDS: add
   BlinkM RGB LED driver, documentation and update MAINTAINERS")
 - leds/ledtrig-oneshot.txt was added by commit 5e417281cd ("leds: add
   oneshot trigger")
 - leds/ledtrig-transient.txt was added by commit 44e1e9f8e7 ("leds:
   add new transient trigger for one shot timer activation")
 - m68k/README.buddha was part of the initial repo
 - networking/LICENSE.(qla3xxx|qlcnic|qlge) was added by commits
   40839129f7, c4e84bde1d, 5a4faa8737
 - networking/Makefile was added by commit 3794f3e812 ("docsrc: build
   Documentation/ sources")
 - networking/i40evf.txt was added by commit 105bf2fe6b ("i40evf: add
   driver to kernel build system")
 - networking/ipsec.txt was added by commit b3c6efbc36 ("xfrm: Add
   file to document IPsec corner case")
 - networking/mac80211-auth-assoc-deauth.txt was added by commit
   3cd7920a2b ("mac80211: add auth/assoc/deauth flow diagram")
 - networking/netlink_mmap.txt was added by commit 5683264c39
   ("netlink: add documentation for memory mapped I/O")
 - networking/nf_conntrack-sysctl.txt was added by commit c9f9e0e159
   ("netfilter: doc: add nf_conntrack sysctl api documentation") lan)
 - networking/team.txt was added by commit 3d249d4ca7 ("net: introduce
   ethernet teaming device")
 - networking/vxlan.txt was added by commit d342894c5d ("vxlan:
   virtual extensible lan")
 - power/runtime_pm.txt was added by commit 5e928f77a0 ("PM: Introduce
   core framework for run-time PM of I/O devices (rev.  17)")
 - power/charger-manager.txt was added by commit 3bb3dbbd56
   ("power_supply: Add initial Charger-Manager driver")
 - RCU/lockdep-splat.txt was added by commit d7bd2d68aa ("rcu:
   Document interpretation of RCU-lockdep splats")
 - s390/kvm.txt was added by 5ecee4b (KVM: s390: API documentation)
 - s390/qeth.txt was added by commit b4d72c08b3 ("qeth: bridgeport
   support - basic control")
 - scheduler/sched-bwc.txt was added by commit 88ebc08ea9 ("sched: Add
   documentation for bandwidth control")
 - scsi/advansys.txt was added by commit 4bd6d7f356 ("[SCSI] advansys:
   Move documentation to Documentation/scsi")
 - scsi/bfa.txt was added by commit 1ec90174bd ("[SCSI] bfa: add
   readme file")
 - scsi/bnx2fc.txt was added by commit 12b8fc10ea ("[SCSI] bnx2fc: Add
   driver documentation")
 - scsi/cxgb3i.txt was added by commit c3673464eb ("[SCSI] cxgb3i: Add
   cxgb3i iSCSI driver.")
 - scsi/hpsa.txt was added by commit 992ebcf14f ("[SCSI] hpsa: Add
   hpsa.txt to Documentation/scsi")
 - scsi/link_power_management_policy.txt was added by commit
   ca77329fb7 ("[libata] Link power management infrastructure")
 - scsi/osd.txt was added by commit 78e0c621de ("[SCSI] osd:
   Documentation for OSD library")
 - scsi/scsi-parameter.txt was created/moved by commit 163475fb11
   ("Documentation: move SCSI parameters to their own text file")
 - serial/driver was part of the initial repo
 - serial/n_gsm.txt was added by commit 323e84122e ("n_gsm: add a
   documentation")
 - timers/Makefile was added by commit 3794f3e812 ("docsrc: build
   Documentation/ sources")
 - virt/kvm/s390.txt was added by commit d9101fca3d ("KVM: s390:
   diagnose call documentation")
 - vm/split_page_table_lock was added by commit 49076ec2cc ("mm:
   dynamically allocate page->ptl if it cannot be embedded to struct
   page")
 - w1/slaves/w1_ds28e04 was added by commit fbf7f7b4e2 ("w1: Add
   1-wire slave device driver for DS28E04-100")
 - w1/masters/omap-hdq was added by commit e0a29382c6 ("hdq:
   documentation for OMAP HDQ")
 - x86/early-microcode.txt was added by commit 0d91ea86a8 ("x86, doc:
   Documentation for early microcode loading")
 - x86/earlyprintk.txt was added by commit a1aade4788 ("x86/doc:
   mini-howto for using earlyprintk=dbgp")
 - x86/entry_64.txt was added by commit 8b4777a4b5 ("x86-64: Document
   some of entry_64.S")
 - x86/pat.txt was added by commit d27554d874 ("x86: PAT
   documentation")

Moved files
 - arm/kernel_user_helpers.txt was moved out of arch/arm/kernel by
   commit 37b8304642 ("ARM: kuser: move interface documentation out of
   the source code")
 - efi-stub.txt was moved out of x86/ and down into Documentation/ in
   commit 4172fe2f8a ("EFI stub documentation updates")
 - laptops/hpfall.c was moved out of hwmon/ and into laptops/ in commit
   efcfed9bad ("Move hp_accel to drivers/platform/x86")
 - commit 5616c23ad9 ("x86: doc: move x86-generic documentation from
   Doc/x86/i386"):
   * x86/usb-legacy-support.txt
   * x86/boot.txt
   * x86/zero_page.txt
 - power/video_extension.txt was moved to acpi in commit 70e66e4df1
   ("ACPI / video: move video_extension.txt to Documentation/acpi")

Removed files (left in 00-INDEX)
 - memory.txt was removed by commit 00ea8990aa ("memory.txt: remove
   stray information")
 - gpio.txt was moved to gpio/ in commit fd8e198cfc ("Documentation:
   gpiolib: document new interface")
 - networking/DLINK.txt was removed by commit 168e06ae26
   ("drivers/net: delete old parallel port de600/de620 drivers")
 - serial/hayes-esp.txt was removed by commit f53a2ade0b ("tty: esp:
   remove broken driver")
 - s390/TAPE was removed by commit 9e280f6693 ("[S390] remove tape
   block docu")
 - vm/locking was removed by commit 57ea8171d2 ("mm: documentation:
   remove hopelessly out-of-date locking doc")
 - laptops/acer-wmi.txt was remvoed by commit 020036678e ("acer-wmi:
   Delete out-of-date documentation")

Typos/misc issues
 - rpc-server-gss.txt was added as knfsd-rpcgss.txt in commit
   030d794bf4 ("SUNRPC: Use gssproxy upcall for server RPCGSS
   authentication.")
 - commit b88cf73d92 ("net: add missing entries to
   Documentation/networking/00-INDEX")
   * generic-hdlc.txt was added as generic_hdlc.txt
   * spider_net.txt was added as spider-net.txt
 - w1/master/mxc-w1 was added as mxc_w1 by commit a5fd9139f7 ("w1: add
   1-wire master driver for i.MX27 / i.MX31")
 - s390/zfcpdump.txt was added as zfcpdump by commit 6920c12a40
   ("[S390] Add Documentation/s390/00-INDEX.")

Signed-off-by: Henrik Austad <henrik@austad.us>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>	[rcu bits]
Acked-by: Rob Landley <rob@landley.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Len Brown <len.brown@intel.com>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:40 -08:00
..
Marvell ARM: add Marvell Berlin SoC familiy to Marvell doc 2013-12-13 16:31:02 +01:00
msm
nwfpe
OMAP doc: Fix typo in doucmentations 2013-07-25 12:34:15 +02:00
pxa
SA1100
Samsung gpio: samsung: Update documentation 2012-09-07 06:40:29 +09:00
Samsung-S3C24XX gpio: samsung: Update documentation 2014-01-07 19:00:59 +01:00
SH-Mobile ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARM 2011-06-29 10:00:52 +01:00
SPEAr Viresh has moved 2012-06-20 14:39:36 -07:00
sti ARM: sti: Add STiH416 SOC support 2013-06-25 13:26:58 -07:00
sunxi Documentation: sunxi: Update Allwinner SoC documentation 2013-10-11 21:24:41 +02:00
VFP
00-INDEX Documentation/: update 00-INDEX files 2014-02-10 16:01:40 -08:00
Booting ARM: 7824/1: update advice on kernel, initramfs and FDT load address. 2013-08-25 17:09:47 +01:00
cluster-pm-race-avoidance.txt ARM: mcpm: introduce helpers for platform coherency exit/setup 2013-04-24 10:37:00 -04:00
firmware.txt ARM: Add interface for registering and calling firmware-specific operations 2013-04-09 01:52:06 +09:00
Interrupts
IXP4xx Documentation/arm/IXP4xx fix a typo 2013-06-05 16:24:59 +02:00
kernel_mode_neon.txt ARM: 7825/1: document the use of NEON in kernel mode 2013-08-25 17:09:48 +01:00
kernel_user_helpers.txt Documentation: Fix multiple typo in Documentation 2012-03-07 16:08:24 +01:00
mem_alignment
memory.txt ARM: Add fixed PCI i/o mapping 2012-07-25 09:26:42 -05:00
Netwinder
Porting
README
Setup
swp_emulation
tcm.txt
vlocks.txt ARM: mcpm: Add baremetal voting mutexes 2013-04-24 10:37:01 -04:00

			   ARM Linux 2.6
			   =============

    Please check <ftp://ftp.arm.linux.org.uk/pub/armlinux> for
    updates.

Compilation of kernel
---------------------

  In order to compile ARM Linux, you will need a compiler capable of
  generating ARM ELF code with GNU extensions.  GCC 3.3 is known to be
  a good compiler.  Fortunately, you needn't guess.  The kernel will report
  an error if your compiler is a recognized offender.

  To build ARM Linux natively, you shouldn't have to alter the ARCH = line
  in the top level Makefile.  However, if you don't have the ARM Linux ELF
  tools installed as default, then you should change the CROSS_COMPILE
  line as detailed below.

  If you wish to cross-compile, then alter the following lines in the top
  level make file:

    ARCH = <whatever>
	with
    ARCH = arm

	and

    CROSS_COMPILE=
	to
    CROSS_COMPILE=<your-path-to-your-compiler-without-gcc>
	eg.
    CROSS_COMPILE=arm-linux-

  Do a 'make config', followed by 'make Image' to build the kernel 
  (arch/arm/boot/Image).  A compressed image can be built by doing a 
  'make zImage' instead of 'make Image'.


Bug reports etc
---------------

  Please send patches to the patch system.  For more information, see
  http://www.arm.linux.org.uk/developer/patches/info.php Always include some
  explanation as to what the patch does and why it is needed.

  Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
  or submitted through the web form at
  http://www.arm.linux.org.uk/developer/ 

  When sending bug reports, please ensure that they contain all relevant
  information, eg. the kernel messages that were printed before/during
  the problem, what you were doing, etc.


Include files
-------------

  Several new include directories have been created under include/asm-arm,
  which are there to reduce the clutter in the top-level directory.  These
  directories, and their purpose is listed below:

   arch-*	machine/platform specific header files
   hardware	driver-internal ARM specific data structures/definitions
   mach		descriptions of generic ARM to specific machine interfaces
   proc-*	processor dependent header files (currently only two
		categories)


Machine/Platform support
------------------------

  The ARM tree contains support for a lot of different machine types.  To
  continue supporting these differences, it has become necessary to split
  machine-specific parts by directory.  For this, the machine category is
  used to select which directories and files get included (we will use
  $(MACHINE) to refer to the category)

  To this end, we now have arch/arm/mach-$(MACHINE) directories which are
  designed to house the non-driver files for a particular machine (eg, PCI,
  memory management, architecture definitions etc).  For all future
  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
  directory.


Modules
-------

  Although modularisation is supported (and required for the FP emulator),
  each module on an ARM2/ARM250/ARM3 machine when is loaded will take
  memory up to the next 32k boundary due to the size of the pages.
  Therefore, is modularisation on these machines really worth it?

  However, ARM6 and up machines allow modules to take multiples of 4k, and
  as such Acorn RiscPCs and other architectures using these processors can
  make good use of modularisation.


ADFS Image files
----------------

  You can access image files on your ADFS partitions by mounting the ADFS
  partition, and then using the loopback device driver.  You must have
  losetup installed.

  Please note that the PCEmulator DOS partitions have a partition table at
  the start, and as such, you will have to give '-o offset' to losetup.


Request to developers
---------------------

  When writing device drivers which include a separate assembler file, please
  include it in with the C file, and not the arch/arm/lib directory.  This
  allows the driver to be compiled as a loadable module without requiring
  half the code to be compiled into the kernel image.

  In general, try to avoid using assembler unless it is really necessary.  It
  makes drivers far less easy to port to other hardware.


ST506 hard drives
-----------------

  The ST506 hard drive controllers seem to be working fine (if a little
  slowly).  At the moment they will only work off the controllers on an
  A4x0's motherboard, but for it to work off a Podule just requires
  someone with a podule to add the addresses for the IRQ mask and the
  HDC base to the source.

  As of 31/3/96 it works with two drives (you should get the ADFS
  *configure harddrive set to 2). I've got an internal 20MB and a great
  big external 5.25" FH 64MB drive (who could ever want more :-) ).

  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
  RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
  last week :-)

  Known bug: Drive data errors can cause a hang; including cases where
  the controller has fixed the error using ECC. (Possibly ONLY
  in that case...hmm).


1772 Floppy
-----------
  This also seems to work OK, but hasn't been stressed much lately.  It
  hasn't got any code for disc change detection in there at the moment which
  could be a bit of a problem!  Suggestions on the correct way to do this
  are welcome.


CONFIG_MACH_ and CONFIG_ARCH_
-----------------------------
  A change was made in 2003 to the macro names for new machines.
  Historically, CONFIG_ARCH_ was used for the bonafide architecture,
  e.g. SA1100, as well as implementations of the architecture,
  e.g. Assabet.  It was decided to change the implementation macros
  to read CONFIG_MACH_ for clarity.  Moreover, a retroactive fixup has
  not been made because it would complicate patching.

  Previous registrations may be found online.

    <http://www.arm.linux.org.uk/developer/machines/>

Kernel entry (head.S)
--------------------------
  The initial entry into the kernel is via head.S, which uses machine
  independent code.  The machine is selected by the value of 'r1' on
  entry, which must be kept unique.

  Due to the large number of machines which the ARM port of Linux provides
  for, we have a method to manage this which ensures that we don't end up
  duplicating large amounts of code.

  We group machine (or platform) support code into machine classes.  A
  class typically based around one or more system on a chip devices, and
  acts as a natural container around the actual implementations.  These
  classes are given directories - arch/arm/mach-<class> and
  arch/arm/mach-<class> - which contain the source files to/include/mach
  support the machine class.  This directories also contain any machine
  specific supporting code.

  For example, the SA1100 class is based upon the SA1100 and SA1110 SoC
  devices, and contains the code to support the way the on-board and off-
  board devices are used, or the device is setup, and provides that
  machine specific "personality."

  This fine-grained machine specific selection is controlled by the machine
  type ID, which acts both as a run-time and a compile-time code selection
  method.

  You can register a new machine via the web site at:

    <http://www.arm.linux.org.uk/developer/machines/>

---
Russell King (15/03/2004)