..
cpm_uart
[POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning
2007-05-09 23:44:58 -05:00
jsm
Subject: jsm driver fix for linuxpps support
2007-05-08 11:15:03 -07:00
8250_accent.c
[SERIAL] Use an enum for serial8250 platform device IDs
2005-09-08 16:04:41 +01:00
8250_acorn.c
[PATCH] serial: replace kmalloc+memset with kzalloc
2007-02-14 08:09:52 -08:00
8250_au1x00.c
[SERIAL] AMD Alchemy UART: claim memory range
2006-04-30 11:15:58 +01:00
8250_boca.c
[SERIAL] Use an enum for serial8250 platform device IDs
2005-09-08 16:04:41 +01:00
8250_early.c
[SERIAL] kernel console should send CRLF not LFCR
2006-03-20 20:00:09 +00:00
8250_exar_st16c554.c
[PATCH] Exar quad port serial
2006-12-07 08:39:35 -08:00
8250_fourport.c
[SERIAL] Use an enum for serial8250 platform device IDs
2005-09-08 16:04:41 +01:00
8250_gsc.c
[PARISC] Clean up asm-parisc/serial.h
2006-10-04 06:47:03 -06:00
8250_hp300.c
[PATCH] hp300: fix driver_register() return handling, remove dio_module_init()
2006-03-25 08:22:53 -08:00
8250_hub6.c
[SERIAL] Use an enum for serial8250 platform device IDs
2005-09-08 16:04:41 +01:00
8250_mca.c
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
8250_pci.c
[PATCH] remove many unneeded #includes of sched.h
2007-02-14 08:09:54 -08:00
8250_pnp.c
[PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c
2007-03-23 11:01:22 -07:00
8250.c
8250: Remove commented out irq cruft
2007-05-08 11:15:15 -07:00
8250.h
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
21285.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
68328serial.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
68328serial.h
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
68360serial.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
amba-pl010.c
[ARM] Convert AMBA PL010 driver to use the clk infrastructure
2007-04-22 12:30:41 +01:00
amba-pl011.c
[ARM] Fix AMBA serial drivers for non-first serial ports
2007-01-24 11:59:57 +00:00
atmel_serial.c
[ARM] 4357/1: AT91: Support slower serial baud-rates
2007-05-03 14:12:45 +01:00
atmel_serial.h
[ARM] 4357/1: AT91: Support slower serial baud-rates
2007-05-03 14:12:45 +01:00
bfin_5xx.c
blackfin: serial driver
2007-05-07 12:12:58 -07:00
clps711x.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
crisv10.c
[PATCH] Char: tty_wakeup cleanup
2007-02-11 10:51:26 -08:00
dz.c
[PATCH] dz: remove struct pt_regs references
2007-03-05 07:57:51 -08:00
dz.h
[PATCH] dz: Fixes to make it work
2006-12-07 08:39:41 -08:00
icom.c
header cleaning: don't include smp_lock.h when not used
2007-05-08 11:15:07 -07:00
icom.h
do not truncate irq number for icom adapter
2007-04-24 08:23:08 -07:00
imx.c
[ARM] 4328/1: Move i.MX UART regs to driver
2007-05-03 20:24:21 +01:00
ioc3_serial.c
[PATCH] serial: replace kmalloc+memset with kzalloc
2007-02-14 08:09:52 -08:00
ioc4_serial.c
[PATCH] serial: replace kmalloc+memset with kzalloc
2007-02-14 08:09:52 -08:00
ip22zilog.c
[PATCH] remove many unneeded #includes of sched.h
2007-02-14 08:09:54 -08:00
ip22zilog.h
Linux-2.6.12-rc2
2005-04-16 15:20:36 -07:00
Kconfig
x86, serial: convert legacy COM ports to platform devices
2007-05-08 11:15:23 -07:00
m32r_sio_reg.h
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
m32r_sio.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
m32r_sio.h
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
Makefile
blackfin: serial driver
2007-05-07 12:12:58 -07:00
mcfserial.c
[PATCH] m68knommu: fix work queues in mcfserial.c driver
2007-03-06 18:08:38 -08:00
mcfserial.h
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
mpc52xx_uart.c
[POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console
2007-05-07 20:31:15 +10:00
mpsc.c
MPSC serial driver tx locking
2007-05-07 12:12:50 -07:00
mux.c
Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git
2007-02-17 00:18:23 -05:00
netx-serial.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
of_serial.c
Merge branch 'linux-2.6'
2007-05-08 13:37:51 +10:00
pmac_zilog.c
[POWERPC] Rename device_is_compatible to of_device_is_compatible
2007-05-07 20:31:14 +10:00
pmac_zilog.h
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c
[PATCH] PNX8550 UART driver
2007-02-14 08:09:52 -08:00
pxa.c
[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX
2007-04-21 23:14:01 +01:00
s3c2410.c
SPIN_LOCK_UNLOCKED cleanup in drivers/serial
2007-05-08 11:15:11 -07:00
sa1100.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
serial_core.c
Serial: serial_core, use pr_debug
2007-05-07 12:12:51 -07:00
serial_cs.c
serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.
2007-02-16 15:19:16 -08:00
serial_lh7a40x.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
serial_txx9.c
serial_txx9: zap changelog from source code
2007-05-08 11:15:12 -07:00
sh-sci.c
serial: sh-sci: Fix module clock refcount for serial console.
2007-05-07 02:11:56 +00:00
sh-sci.h
sh: MS7712SE01 board support.
2007-05-07 02:10:54 +00:00
sn_console.c
[PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage
2007-03-08 07:39:15 -08:00
suncore.c
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
suncore.h
Linux-2.6.12-rc2
2005-04-16 15:20:36 -07:00
sunhv.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
sunsab.c
[PATCH] remove many unneeded #includes of sched.h
2007-02-14 08:09:54 -08:00
sunsab.h
[SUNSAB]: Defer register updates until transmitter is idle.
2005-05-11 11:34:32 -07:00
sunsu.c
[SERIAL] sunsu: Fix section mismatch warnings.
2007-05-07 00:14:13 -07:00
sunzilog.c
[PATCH] remove many unneeded #includes of sched.h
2007-02-14 08:09:54 -08:00
sunzilog.h
Linux-2.6.12-rc2
2005-04-16 15:20:36 -07:00
uartlite.c
[PATCH] drivers/serial NULL noise removal
2007-02-09 09:14:06 -08:00
v850e_uart.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00
vr41xx_siu.c
[PATCH] tty: switch to ktermios
2006-12-08 08:28:57 -08:00