Mike Turquette 32cc002116 ARM: OMAP4: clock: Convert to common clk ...

Convert all OMAP4 specific platform files to use COMMON clk
and keep all the changes under the CONFIG_COMMON_CLK macro check
so it does not break any existing code. At a later point switch
to COMMON clk and get rid of all old/legacy code.

This converts all apis which will be called directly from COMMON
clk to take a struct clk_hw parameter, and all the internal platform
apis to take a struct clk_hw_omap parameter.

Changes are based off the original patch from Mike Turquette.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: created new omap2_clksel_find_parent_index() rather than
 modifying omap2_init_clksel_parent(); moved clkhwops_iclk_wait to
 clkt_iclk.c to fix OMAP4-only builds; added clk-provider.h include to clock.h
 to try to fix some 3430-builds]
[mturquette@ti.com: squash patch for omap2_clkops_{en,dis}able_clkdm;
 omap2_dflt_clk_is_enabled should not enable clocks]
Signed-off-by: Mike Turquette <mturquette@ti.com>
[paul@pwsan.com: fix compiler warning; update to apply; added kerneldoc on
 non-trivial new functions; added the dpll3xxx clockdomain modifications]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

2012-11-12 13:55:50 -07:00

..

include/mach

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

am33xx.h

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

am35xx-emac.c

ARM: OMAP: Make omap_device local to mach-omap2

2012-10-17 12:08:40 -07:00

am35xx-emac.h

ARM: OMAP: move generic EMAC init to separate file

2012-03-05 11:08:36 -08:00

am35xx.h

ARM: OMAP2+: Make am35xx.h local

2012-09-20 15:02:23 -07:00

board-2430sdp.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-3430sdp.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-3630sdp.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-4430sdp.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-am3517crane.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-am3517evm.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-apollon.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-cm-t35.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-cm-t3517.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-devkit8000.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-flash.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

board-flash.h

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

board-generic.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-h4.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-igep0020.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-ldp.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-n8x0.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-omap3beagle.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-omap3evm.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-omap3logic.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-omap3pandora.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-omap3stalker.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-omap3touchbook.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-omap4panda.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-overo.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-rm680.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-rx51-peripherals.c

ARM: OMAP: Make plat/omap-pm.h local to mach-omap2

2012-10-18 16:22:08 -07:00

board-rx51-video.c

ARM: OMAP2+: Make board-rx51.h local

2012-09-20 15:02:27 -07:00

board-rx51.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-rx51.h

ARM: OMAP2+: Make board-rx51.h local

2012-09-20 15:02:27 -07:00

board-ti8168evm.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-zoom-debugboard.c

ARM: OMAP2+: Make board-zoom.h local

2012-10-17 11:36:46 -07:00

board-zoom-display.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

board-zoom-peripherals.c

Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers

2012-10-24 15:05:45 -07:00

board-zoom.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

board-zoom.h

ARM: OMAP2+: Make board-zoom.h local

2012-10-17 11:36:46 -07:00

clkt2xxx_apll.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

clkt2xxx_dpll.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

clkt2xxx_dpllcore.c

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

clkt2xxx_osc.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

clkt2xxx_sys.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

clkt2xxx_virt_prcm_set.c

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

clkt34xx_dpll3m2.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

clkt_clksel.c

ARM: OMAP4: clock: Convert to common clk

2012-11-12 13:55:50 -07:00

clkt_dpll.c

ARM: OMAP4: clock: Convert to common clk

2012-11-12 13:55:50 -07:00

clkt_iclk.c

ARM: OMAP4: clock: Convert to common clk

2012-11-12 13:55:50 -07:00

clock2xxx.c

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

clock2xxx.h

ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()

2012-11-08 12:33:08 -07:00

clock3xxx_data.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

clock3xxx.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

clock3xxx.h

…

clock33xx_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

clock34xx.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

clock34xx.h

…

clock36xx.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

clock36xx.h

…

clock44xx_data.c

This is the first set of omap cleanup patches for v3.8 merge

2012-10-24 13:25:44 -07:00

clock44xx.h

…

clock2420_data.c

ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()

2012-11-08 12:33:08 -07:00

clock2430_data.c

ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()

2012-11-08 12:33:08 -07:00

clock2430.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

clock3517.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

clock3517.h

…

clock_common_data.c

ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file

2012-06-26 20:57:22 -06:00

clock.c

ARM: OMAP4: clock: Convert to common clk

2012-11-12 13:55:50 -07:00

clock.h

ARM: OMAP4: clock: Convert to common clk

2012-11-12 13:55:50 -07:00

clockdomain.c

This is the first set of omap cleanup patches for v3.8 merge

2012-10-24 13:25:44 -07:00

clockdomain.h

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

clockdomains2xxx_3xxx_data.c

ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer

2012-07-05 17:25:38 -07:00

clockdomains3xxx_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

clockdomains33xx_data.c

ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations

2012-06-18 12:08:06 -06:00

clockdomains44xx_data.c

ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems

2012-09-23 17:28:28 -06:00

clockdomains2420_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

clockdomains2430_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

cm1_44xx.h

…

cm2_44xx.h

…

cm2xxx_3xxx.h

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

cm2xxx.c

ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions

2012-11-08 12:33:08 -07:00

cm2xxx.h

ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions

2012-11-08 12:33:08 -07:00

cm3xxx.c

ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions

2012-11-08 12:33:08 -07:00

cm3xxx.h

ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions

2012-11-08 12:33:08 -07:00

cm33xx.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

cm33xx.h

ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details

2012-06-18 12:08:06 -06:00

cm44xx.c

ARM: OMAP2+: Move most of plat/io.h into local iomap.h

2012-02-24 10:34:35 -08:00

cm44xx.h

…

cm_common.c

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

cm-regbits-24xx.h

ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()

2012-11-08 12:33:08 -07:00

cm-regbits-33xx.h

ARM: AM33XX: cm: Add bit-field width values

2012-09-22 10:53:08 -06:00

cm-regbits-34xx.h

ARM: OMAP3: hwmod data: add sad2d hwmod

2012-09-23 17:28:21 -06:00

cm-regbits-44xx.h

ARM: OMAP4: cm: add bitfield width values

2012-09-22 10:52:59 -06:00

cm.h

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

cminst44xx.c

ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM

2012-10-21 01:01:11 -06:00

cminst44xx.h

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

common-board-devices.c

ARM: OMAP2+: nand: header cleanup

2012-10-15 14:42:05 +05:30

common-board-devices.h

ARM: OMAP2+: nand: unify init functions

2012-10-15 12:00:44 +05:30

common.c

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

common.h

ARM: OMAP2+: board files: use SoC-specific system restart functions

2012-11-08 12:33:08 -07:00

control.c

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

control.h

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

cpuidle34xx.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

cpuidle44xx.c

ARM: omap: allow building omap44xx without SMP

2012-08-23 17:16:42 +02:00

ctrl_module_core_44xx.h

ARM: OMAP2+: Make ctrl_module_core_44xx.h local

2012-09-20 15:02:29 -07:00

ctrl_module_pad_core_44xx.h

ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local

2012-09-20 15:02:30 -07:00

ctrl_module_pad_wkup_44xx.h

ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local

2012-09-20 15:02:32 -07:00

ctrl_module_wkup_44xx.h

ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local

2012-09-20 15:02:33 -07:00

debug-devices.h

ARM: OMAP2+: Make debug-devices.h local

2012-09-20 15:02:41 -07:00

devices.c

ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer

2012-10-29 20:49:44 -06:00

devices.h

…

display.c

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

display.h

…

dma.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

dma.h

ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2

2012-10-15 14:03:51 -07:00

dpll3xxx.c

ARM: OMAP4: clock: Convert to common clk

2012-11-12 13:55:50 -07:00

dpll44xx.c

ARM: OMAP4: clock: Convert to common clk

2012-11-12 13:55:50 -07:00

drm.c

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

dsp.c

ARM: OMAP: Make plat/omap-pm.h local to mach-omap2

2012-10-18 16:22:08 -07:00

emu.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

gpio.c

ARM: OMAP: Make plat/omap-pm.h local to mach-omap2

2012-10-18 16:22:08 -07:00

gpmc-nand.c

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

gpmc-nand.h

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

gpmc-onenand.c

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

gpmc-onenand.h

ARM: OMAP2+: onenand: header cleanup

2012-10-15 14:42:03 +05:30

gpmc-smc91x.c

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

gpmc-smc91x.h

ARM: OMAP2+: Make gpmc-smc91x.h local

2012-09-20 15:02:49 -07:00

gpmc-smsc911x.c

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

gpmc-smsc911x.h

ARM: OMAP2+: Make gpmc-smsc911x.h local

2012-09-20 15:03:55 -07:00

gpmc.c

This is the first set of omap cleanup patches for v3.8 merge

2012-10-24 13:25:44 -07:00

gpmc.h

ARM: OMAP2+: gpmc: localize gpmc header

2012-10-15 14:42:15 +05:30

hdq1w.c

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

hdq1w.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

hsmmc.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

hsmmc.h

MMC highlights for 3.4:

2012-03-28 20:59:45 -07:00

hwspinlock.c

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

i2c.c

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

i2c.h

ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2

2012-10-17 11:36:50 -07:00

id.c

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

id.h

ARM: OMAP2+: Make id.h local

2012-09-20 15:02:22 -07:00

io.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

iomap.h

ARM: OMAP5: Add minimal support for OMAP5430 SOC

2012-07-09 19:14:39 +05:30

iommu2.c

…

irq.c

These fixes are needed to fix non-omap build breakage for

2012-09-23 17:15:44 -06:00

Kconfig

ARM: config: sort select statements alphanumerically

2012-10-13 17:11:28 +01:00

l3_2xxx.h

ARM: OMAP2+: Make l3_2xxx.h local

2012-09-20 15:03:59 -07:00

l3_3xxx.h

ARM: OMAP2+: Make l3_3xxx.h local

2012-09-20 15:04:00 -07:00

l4_2xxx.h

ARM: OMAP2+: Make l4_2xxx.h local

2012-09-20 15:04:01 -07:00

l4_3xxx.h

ARM: OMAP2+: Make l4_3xxx.h local

2012-09-20 15:04:03 -07:00

mailbox.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

Makefile

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

Makefile.boot

ARM: dtb: move all dtb targets to common Makefile

2012-09-20 22:58:17 -07:00

mcbsp.c

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

mmc.h

ARM: OMAP: Split plat/mmc.h into local headers and platform_data

2012-10-15 12:09:43 -07:00

msdi.c

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

mux34xx.c

…

mux34xx.h

…

mux44xx.c

…

mux44xx.h

…

mux2420.c

…

mux2420.h

…

mux2430.c

…

mux2430.h

…

mux.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

mux.h

omap2: mux: remove comment for nonexistent member

2012-08-07 03:58:02 -07:00

omap2-restart.c

ARM: OMAP2+: PRCM: create SoC-specific chip restart functions

2012-11-08 12:33:08 -07:00

omap3-restart.c

ARM: OMAP2+: PRCM: create SoC-specific chip restart functions

2012-11-08 12:33:08 -07:00

omap4-common.c

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

omap4-keypad.h

ARM: OMAP2+: Make omap4-keypad.h local

2012-09-20 15:04:04 -07:00

omap4-sar-layout.h

ARM: OMAP5: Add the WakeupGen IP updates

2012-07-09 19:14:39 +05:30

omap24xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap34xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap44xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap54xx.h

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

omap_device.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

omap_device.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_hwmod_2xxx_3xxx_interconnect_data.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

omap_hwmod_2xxx_3xxx_ipblock_data.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

omap_hwmod_2xxx_interconnect_data.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

omap_hwmod_2xxx_ipblock_data.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

omap_hwmod_3xxx_data.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

omap_hwmod_33xx_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

omap_hwmod_44xx_data.c

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_hwmod_2420_data.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

omap_hwmod_2430_data.c

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_hwmod_common_data.c

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_hwmod_common_data.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_hwmod.c

ARM: OMAP: hwmod: Fix up hwmod based clkdm accesses

2012-11-12 13:55:50 -07:00

omap_hwmod.h

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

omap_opp_data.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00

omap_phy_internal.c

ARM: OMAP2+: Introduce local usb.h

2012-10-24 14:26:18 -07:00

omap_twl.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

omap-headsmp.S

ARM: OMAP5: Add SMP support

2012-07-09 19:14:39 +05:30

omap-hotplug.c

Merge branch 'multiplatform/smp_ops' into next/multiplatform

2012-09-22 00:16:04 -07:00

omap-iommu.c

ARM: OMAP2+: Prepare for irqs.h removal

2012-09-12 18:06:30 -07:00

omap-mpuss-lowpower.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

omap-pm.h

ARM: OMAP: Make plat/omap-pm.h local to mach-omap2

2012-10-18 16:22:08 -07:00

omap-secure.c

ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2

2012-10-18 16:22:24 -07:00

omap-secure.h

ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2

2012-10-18 16:22:24 -07:00

omap-smc.S

…

omap-smp.c

Merge branch 'multiplatform/smp_ops' into next/multiplatform

2012-09-22 00:16:04 -07:00

omap-wakeupgen.c

ARM: soc: general cleanups

2012-10-01 18:19:05 -07:00

omap-wakeupgen.h

ARM: OMAP2+: Make omap-wakeupgen.h local

2012-09-20 15:02:37 -07:00

opp2xxx.h

…

opp3xxx_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

opp4xxx_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

opp2420_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

opp2430_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

opp.c

ARM: OMAP: Make omap_device local to mach-omap2

2012-10-17 12:08:40 -07:00

pm24xx.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

pm34xx.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

pm44xx.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

pm-debug.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

pm.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

pm.h

arm-soc: power management changes

2012-07-23 17:43:53 -07:00

pmu.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

powerdomain-common.c

ARM: OMAP2+: Fix build issues with missing include of linux/bug.h

2012-03-07 17:29:34 -08:00

powerdomain.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

powerdomain.h

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

powerdomains2xxx_3xxx_data.c

…

powerdomains2xxx_3xxx_data.h

…

powerdomains2xxx_data.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

powerdomains3xxx_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

powerdomains33xx_data.c

ARM: OMAP AM33xx: powerdomains: add AM335x support

2012-06-18 12:08:06 -06:00

powerdomains44xx_data.c

…

prcm44xx.h

…

prcm_mpu44xx.c

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

prcm_mpu44xx.h

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

prcm-common.h

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

prm2xxx_3xxx.c

ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM

2012-10-21 01:01:11 -06:00

prm2xxx_3xxx.h

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

prm2xxx.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

prm2xxx.h

ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)

2012-11-08 12:33:07 -07:00

prm3xxx.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

prm3xxx.h

ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)

2012-11-08 12:33:07 -07:00

prm33xx.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

prm33xx.h

ARM: OMAP AM33xx: PRM: add PRM support

2012-06-18 12:08:06 -06:00

prm44xx.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

prm44xx.h

ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver

2012-10-21 01:01:13 -06:00

prm_common.c

ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]

2012-11-08 15:09:26 -07:00

prm-regbits-24xx.h

ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver

2012-10-21 01:01:13 -06:00

prm-regbits-33xx.h

ARM: OMAP AM33xx: PRM: add PRM support

2012-06-18 12:08:06 -06:00

prm-regbits-34xx.h

ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver

2012-10-21 01:01:13 -06:00

prm-regbits-44xx.h

…

prm.h

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

prminst44xx.c

ARM: OMAP4+: Add prm and cm base init function.

2012-05-07 23:55:22 -06:00

prminst44xx.h

ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup

2012-11-08 15:09:26 -07:00

scrm44xx.h

…

sdram-hynix-h8mbx00u0mer-0em.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-micron-mt46h32m32lf-6.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-nokia.c

ARM: OMAP: remove plat/clock.h

2012-10-18 16:23:20 -07:00

sdram-nokia.h

…

sdram-numonyx-m65kxxxxam.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdram-qimonda-hyb18m512160af-6.h

ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h

2012-10-17 10:18:37 -07:00

sdrc2xxx.c

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

sdrc.c

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

sdrc.h

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

serial.c

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

serial.h

ARM: OMAP: Split plat/serial.h for omap1 and omap2+

2012-10-24 13:34:31 -07:00

sleep24xx.S

ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2

2012-09-12 18:06:31 -07:00

sleep34xx.S

The first set of OMAP PRM/CM-related cleanup patches for 3.8.

2012-10-24 17:05:59 -07:00

sleep44xx.S

ARM: OMAP2+: Make omap-secure.h local

2012-09-20 15:02:35 -07:00

smartreflex-class3.c

ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains.

2012-05-31 16:03:44 -07:00

soc.h

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

sr_device.c

ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2

2012-10-18 16:23:46 -07:00

sram34xx.S

ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files

2012-10-21 01:01:11 -06:00

sram242x.S

ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files

2012-10-21 01:01:11 -06:00

sram243x.S

ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files

2012-10-21 01:01:11 -06:00

ti81xx.h

ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code

2012-11-08 12:33:07 -07:00

timer.c

This is the first set of omap cleanup patches for v3.8 merge

2012-10-24 13:25:44 -07:00

twl-common.c

Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers

2012-10-24 15:05:45 -07:00

twl-common.h

Sound updates for 3.7-rc1

2012-10-09 07:07:14 +09:00

usb-host.c

Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers

2012-10-24 15:05:45 -07:00

usb-musb.c

Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers

2012-10-24 15:05:45 -07:00

usb-tusb6010.c

Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers

2012-10-24 15:05:45 -07:00

usb.h

ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h>

2012-10-24 14:26:55 -07:00

vc3xxx_data.c

arm: omap3: voltage: fix channel configuration

2012-03-06 17:35:24 -08:00

vc44xx_data.c

…

vc.c

These fixes are needed to fix non-omap build breakage for

2012-09-23 17:15:44 -06:00

vc.h

…

voltage.c

ARM: OMAP: unwrap strings

2012-09-12 02:57:10 -06:00

voltage.h

ARM: omap: move platform_data definitions

2012-09-19 17:39:52 +02:00

voltagedomains2xxx_data.c

…

voltagedomains3xxx_data.c

ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+

2012-09-12 18:06:31 -07:00

voltagedomains33xx_data.c

ARM: OMAP AM33xx: voltagedomain: Add voltage domain data

2012-06-18 00:47:26 -06:00

voltagedomains44xx_data.c

ARM: OMAP: fix voltage domain build errors with PM_OPP disabled

2012-02-21 09:36:34 +00:00

vp3xxx_data.c

…

vp44xx_data.c

…

vp.c

ARM: OMAP: unwrap strings

2012-09-12 02:57:10 -06:00

vp.h

…

wd_timer.c

ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros

2012-11-08 15:09:26 -07:00

wd_timer.h

ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

2012-10-18 16:05:55 -07:00