Davide Caratti e718fe450e net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets ... if the NIC fails to validate the checksum on TCP/UDP, and validation of IP checksum is successful, the driver subtracts the pseudo-header checksum from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails. V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set Reported-by: Shuang Li <shuali@redhat.com> Fixes: f8c6455bb0 ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2017-08-08 17:59:57 -07:00
..
mlx4	net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets	2017-08-08 17:59:57 -07:00
mlx5/core	net/mlx5: Fix mlx5_add_flow_rules call with correct num of dests	2017-07-27 16:40:17 +03:00
mlxfw	net/mlxfw: Properly handle dependancy with non-loadable mlx5	2017-07-03 02:32:25 -07:00
mlxsw	mlxsw: spectrum_switchdev: Release multicast groups during fini	2017-08-04 11:15:07 -07:00
Kconfig	Add the mlxfw module for Mellanox firmware flash process	2017-05-25 17:46:17 -04:00
Makefile	Add the mlxfw module for Mellanox firmware flash process	2017-05-25 17:46:17 -04:00