mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 09:22:37 +00:00
1cf46c42d7
1. remove __REG macro 2. add (void __iomem *) to io_p2v macro 3. add (phys_addr_t) to io_v2p macro 4. add PKUNITY_AHB_BASE and PKUNITY_APB_BASE definitions 5. modify all PKUNITY_mmio_BASEs from physical addr to virtual addr 6. adjust prefix macro for all usage of PKUNITY_mmio_BASEs -- by advice with Arnd Bergmann Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
203 lines
3.8 KiB
ArmAsm
203 lines
3.8 KiB
ArmAsm
/*
|
|
* linux/arch/unicore32/kernel/sleep.S
|
|
*
|
|
* Code specific to PKUnity SoC and UniCore ISA
|
|
*
|
|
* Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
|
|
* Copyright (C) 2001-2010 Guan Xuetao
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <mach/hardware.h>
|
|
|
|
.text
|
|
|
|
pkunity_cpu_save_cp:
|
|
|
|
@ get coprocessor registers
|
|
|
|
movc r3, p0.c7, #0 @ PID
|
|
movc r4, p0.c2, #0 @ translation table base addr
|
|
movc r5, p0.c1, #0 @ control reg
|
|
|
|
|
|
@ store them plus current virtual stack ptr on stack
|
|
mov r6, sp
|
|
stm.w (r3 - r6), [sp-]
|
|
|
|
mov pc, lr
|
|
|
|
pkunity_cpu_save_sp:
|
|
@ preserve phys address of stack
|
|
mov r0, sp
|
|
stw.w lr, [sp+], #-4
|
|
b.l sleep_phys_sp
|
|
ldw r1, =sleep_save_sp
|
|
stw r0, [r1]
|
|
ldw.w pc, [sp]+, #4
|
|
|
|
/*
|
|
* puv3_cpu_suspend()
|
|
*
|
|
* Forces CPU into sleep state.
|
|
*
|
|
* r0 = value for PWRMODE M field for desired sleep state
|
|
*/
|
|
|
|
ENTRY(puv3_cpu_suspend)
|
|
stm.w (r16 - r27, lr), [sp-] @ save registers on stack
|
|
stm.w (r4 - r15), [sp-] @ save registers on stack
|
|
|
|
#ifdef CONFIG_UNICORE_FPU_F64
|
|
sfm.w (f0 - f7 ), [sp-]
|
|
sfm.w (f8 - f15), [sp-]
|
|
sfm.w (f16 - f23), [sp-]
|
|
sfm.w (f24 - f31), [sp-]
|
|
cff r4, s31
|
|
stm.w (r4), [sp-]
|
|
#endif
|
|
b.l pkunity_cpu_save_cp
|
|
|
|
b.l pkunity_cpu_save_sp
|
|
|
|
@ clean data cache
|
|
mov r1, #0
|
|
movc p0.c5, r1, #14
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
|
|
|
|
@ DDR2 BaseAddr
|
|
ldw r0, =(PKUNITY_DDR2CTRL_BASE)
|
|
|
|
@ PM BaseAddr
|
|
ldw r1, =(PKUNITY_PM_BASE)
|
|
|
|
@ set PLL_SYS_CFG reg, 275
|
|
movl r6, #0x00002401
|
|
stw r6, [r1+], #0x18
|
|
@ set PLL_DDR_CFG reg, 66MHz
|
|
movl r6, #0x00100c00
|
|
stw r6, [r1+], #0x1c
|
|
|
|
@ set wake up source
|
|
movl r8, #0x800001ff @ epip4d
|
|
stw r8, [r1+], #0xc
|
|
|
|
@ set PGSR
|
|
movl r5, #0x40000
|
|
stw r5, [r1+], #0x10
|
|
|
|
@ prepare DDR2 refresh settings
|
|
ldw r5, [r0+], #0x24
|
|
or r5, r5, #0x00000001
|
|
|
|
@ prepare PMCR for PLL changing
|
|
movl r6, #0xc
|
|
|
|
@ prepare for closing PLL
|
|
movl r7, #0x1
|
|
|
|
@ prepare sleep mode
|
|
mov r8, #0x1
|
|
|
|
@ movl r0, 0x11111111
|
|
@ put_word_ocd r0
|
|
b pkunity_cpu_do_suspend
|
|
|
|
.ltorg
|
|
.align 5
|
|
pkunity_cpu_do_suspend:
|
|
b 101f
|
|
@ put DDR2 into self-refresh
|
|
100: stw r5, [r0+], #0x24
|
|
@ change PLL
|
|
stw r6, [r1]
|
|
b 1f
|
|
|
|
.ltorg
|
|
.align 5
|
|
101: b 102f
|
|
@ wait for PLL changing complete
|
|
1: ldw r6, [r1+], #0x44
|
|
csub.a r6, #0x1
|
|
bne 1b
|
|
b 2f
|
|
|
|
.ltorg
|
|
.align 5
|
|
102: b 100b
|
|
@ close PLL
|
|
2: stw r7, [r1+], #0x4
|
|
@ enter sleep mode
|
|
stw r8, [r1]
|
|
3: b 3b
|
|
|
|
|
|
|
|
|
|
/*
|
|
* puv3_cpu_resume()
|
|
*
|
|
* entry point from bootloader into kernel during resume
|
|
*
|
|
* Note: Yes, part of the following code is located into the .data section.
|
|
* This is to allow sleep_save_sp to be accessed with a relative load
|
|
* while we can't rely on any MMU translation. We could have put
|
|
* sleep_save_sp in the .text section as well, but some setups might
|
|
* insist on it to be truly read-only.
|
|
*/
|
|
|
|
.data
|
|
.align 5
|
|
ENTRY(puv3_cpu_resume)
|
|
@ movl r0, 0x20202020
|
|
@ put_word_ocd r0
|
|
|
|
ldw r0, sleep_save_sp @ stack phys addr
|
|
ldw r2, =resume_after_mmu @ its absolute virtual address
|
|
ldm (r3 - r6), [r0]+ @ CP regs + virt stack ptr
|
|
mov sp, r6 @ CP regs + virt stack ptr
|
|
|
|
mov r1, #0
|
|
movc p0.c6, r1, #6 @ invalidate I & D TLBs
|
|
movc p0.c5, r1, #28 @ invalidate I & D caches, BTB
|
|
|
|
movc p0.c7, r3, #0 @ PID
|
|
movc p0.c2, r4, #0 @ translation table base addr
|
|
movc p0.c1, r5, #0 @ control reg, turn on mmu
|
|
nop
|
|
jump r2
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
sleep_save_sp:
|
|
.word 0 @ preserve stack phys ptr here
|
|
|
|
.text
|
|
resume_after_mmu:
|
|
@ movl r0, 0x30303030
|
|
@ put_word_ocd r0
|
|
|
|
#ifdef CONFIG_UNICORE_FPU_F64
|
|
lfm.w (f0 - f7 ), [sp]+
|
|
lfm.w (f8 - f15), [sp]+
|
|
lfm.w (f16 - f23), [sp]+
|
|
lfm.w (f24 - f31), [sp]+
|
|
ldm.w (r4), [sp]+
|
|
ctf r4, s31
|
|
#endif
|
|
ldm.w (r4 - r15), [sp]+ @ restore registers from stack
|
|
ldm.w (r16 - r27, pc), [sp]+ @ return to caller
|