mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-28 04:17:47 +00:00
57303488cd
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit, power_on and power_off the following APIs are used phy_init(), phy_exit(), phy_power_on() and phy_power_off(). However using the old USB phy library wont be removed till the PHYs of all other SoC's using dwc3 core is adapted to the Generic PHY Framework. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
27 lines
814 B
Plaintext
27 lines
814 B
Plaintext
synopsys DWC3 CORE
|
|
|
|
DWC3- USB3 CONTROLLER
|
|
|
|
Required properties:
|
|
- compatible: must be "snps,dwc3"
|
|
- reg : Address and length of the register set for the device
|
|
- interrupts: Interrupts used by the dwc3 controller.
|
|
|
|
Optional properties:
|
|
- usb-phy : array of phandle for the PHY device. The first element
|
|
in the array is expected to be a handle to the USB2/HS PHY and
|
|
the second element is expected to be a handle to the USB3/SS PHY
|
|
- phys: from the *Generic PHY* bindings
|
|
- phy-names: from the *Generic PHY* bindings
|
|
- tx-fifo-resize: determines if the FIFO *has* to be reallocated.
|
|
|
|
This is usually a subnode to DWC3 glue to which it is connected.
|
|
|
|
dwc3@4a030000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x4a030000 0xcfff>;
|
|
interrupts = <0 92 4>
|
|
usb-phy = <&usb2_phy>, <&usb3,phy>;
|
|
tx-fifo-resize;
|
|
};
|