linux/net/mac80211/iface.c
Johannes Berg 3a25a8c8b7 mac80211: add improved HW queue control
mac80211 currently only supports one hardware queue
per AC. This is already problematic for off-channel
uses since if we go off channel while the BE queue
is full and then try to send an off-channel frame
the frame will never go out. This will become worse
when we support multi-channel since then a queue on
one channel might be full, but we have to stop the
software queue for all channels. That is obviously
not desirable.

To address this problem allow drivers to register
more hardware queues, and allow them to map them to
virtual interfaces. When they stop a hardware queue
the corresponding AC software queues on the correct
interfaces will be stopped as well. Additionally,
there's an off-channel queue to solve that problem
and a per-interface after-DTIM beacon queue. This
allows drivers to manage software queues closer to
how the hardware works.

Currently, there's a limit of 16 hardware queues.
This may or may not be sufficient, we can adjust it
as needed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11 16:23:50 -04:00

1567 lines
40 KiB
C

/*
* Interface handling (except master interface)
*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include "ieee80211_i.h"
#include "sta_info.h"
#include "debugfs_netdev.h"
#include "mesh.h"
#include "led.h"
#include "driver-ops.h"
#include "wme.h"
#include "rate.h"
/**
* DOC: Interface list locking
*
* The interface list in each struct ieee80211_local is protected
* three-fold:
*
* (1) modifications may only be done under the RTNL
* (2) modifications and readers are protected against each other by
* the iflist_mtx.
* (3) modifications are done in an RCU manner so atomic readers
* can traverse the list in RCU-safe blocks.
*
* As a consequence, reads (traversals) of the list can be protected
* by either the RTNL, the iflist_mtx or RCU.
*/
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
{
int meshhdrlen;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
/* FIX: what would be proper limits for MTU?
* This interface uses 802.3 frames. */
if (new_mtu < 256 ||
new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
return -EINVAL;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
dev->mtu = new_mtu;
return 0;
}
static int ieee80211_change_mac(struct net_device *dev, void *addr)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sockaddr *sa = addr;
int ret;
if (ieee80211_sdata_running(sdata))
return -EBUSY;
ret = eth_mac_addr(dev, sa);
if (ret == 0)
memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN);
return ret;
}
static inline int identical_mac_addr_allowed(int type1, int type2)
{
return type1 == NL80211_IFTYPE_MONITOR ||
type2 == NL80211_IFTYPE_MONITOR ||
(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
(type1 == NL80211_IFTYPE_WDS &&
(type2 == NL80211_IFTYPE_WDS ||
type2 == NL80211_IFTYPE_AP)) ||
(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
(type1 == NL80211_IFTYPE_AP_VLAN &&
(type2 == NL80211_IFTYPE_AP ||
type2 == NL80211_IFTYPE_AP_VLAN));
}
static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype iftype)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_sub_if_data *nsdata;
struct net_device *dev = sdata->dev;
ASSERT_RTNL();
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(nsdata, &local->interfaces, list) {
struct net_device *ndev = nsdata->dev;
if (ndev != dev && ieee80211_sdata_running(nsdata)) {
/*
* Allow only a single IBSS interface to be up at any
* time. This is restricted because beacon distribution
* cannot work properly if both are in the same IBSS.
*
* To remove this restriction we'd have to disallow them
* from setting the same SSID on different IBSS interfaces
* belonging to the same hardware. Then, however, we're
* faced with having to adopt two different TSF timers...
*/
if (iftype == NL80211_IFTYPE_ADHOC &&
nsdata->vif.type == NL80211_IFTYPE_ADHOC)
return -EBUSY;
/*
* The remaining checks are only performed for interfaces
* with the same MAC address.
*/
if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
continue;
/*
* check whether it may have the same address
*/
if (!identical_mac_addr_allowed(iftype,
nsdata->vif.type))
return -ENOTUNIQ;
/*
* can only add VLANs to enabled APs
*/
if (iftype == NL80211_IFTYPE_AP_VLAN &&
nsdata->vif.type == NL80211_IFTYPE_AP)
sdata->bss = &nsdata->u.ap;
}
}
return 0;
}
static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata)
{
int n_queues = sdata->local->hw.queues;
int i;
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
if (WARN_ON_ONCE(sdata->vif.hw_queue[i] ==
IEEE80211_INVAL_HW_QUEUE))
return -EINVAL;
if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >=
n_queues))
return -EINVAL;
}
if (sdata->vif.type != NL80211_IFTYPE_AP) {
sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
return 0;
}
if (WARN_ON_ONCE(sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE))
return -EINVAL;
if (WARN_ON_ONCE(sdata->vif.cab_queue >= n_queues))
return -EINVAL;
return 0;
}
void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
const int offset)
{
struct ieee80211_local *local = sdata->local;
u32 flags = sdata->u.mntr_flags;
#define ADJUST(_f, _s) do { \
if (flags & MONITOR_FLAG_##_f) \
local->fif_##_s += offset; \
} while (0)
ADJUST(FCSFAIL, fcsfail);
ADJUST(PLCPFAIL, plcpfail);
ADJUST(CONTROL, control);
ADJUST(CONTROL, pspoll);
ADJUST(OTHER_BSS, other_bss);
#undef ADJUST
}
static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
int i;
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
sdata->vif.hw_queue[i] = IEEE80211_INVAL_HW_QUEUE;
else
sdata->vif.hw_queue[i] = i;
}
sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
}
static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
int ret;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return 0;
if (local->monitor_sdata)
return 0;
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
if (!sdata)
return -ENOMEM;
/* set up data */
sdata->local = local;
sdata->vif.type = NL80211_IFTYPE_MONITOR;
snprintf(sdata->name, IFNAMSIZ, "%s-monitor",
wiphy_name(local->hw.wiphy));
ieee80211_set_default_queues(sdata);
ret = drv_add_interface(local, sdata);
if (WARN_ON(ret)) {
/* ok .. stupid driver, it asked for this! */
kfree(sdata);
return ret;
}
ret = ieee80211_check_queues(sdata);
if (ret) {
kfree(sdata);
return ret;
}
rcu_assign_pointer(local->monitor_sdata, sdata);
return 0;
}
static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return;
sdata = rtnl_dereference(local->monitor_sdata);
if (!sdata)
return;
rcu_assign_pointer(local->monitor_sdata, NULL);
synchronize_net();
drv_remove_interface(local, sdata);
kfree(sdata);
}
/*
* NOTE: Be very careful when changing this function, it must NOT return
* an error on interface type changes that have been pre-checked, so most
* checks should be in ieee80211_check_concurrent_iface.
*/
static int ieee80211_do_open(struct net_device *dev, bool coming_up)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
int res;
u32 hw_reconf_flags = 0;
switch (sdata->vif.type) {
case NL80211_IFTYPE_WDS:
if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
return -ENOLINK;
break;
case NL80211_IFTYPE_AP_VLAN: {
struct ieee80211_sub_if_data *master;
if (!sdata->bss)
return -ENOLINK;
list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
master = container_of(sdata->bss,
struct ieee80211_sub_if_data, u.ap);
sdata->control_port_protocol =
master->control_port_protocol;
sdata->control_port_no_encrypt =
master->control_port_no_encrypt;
break;
}
case NL80211_IFTYPE_AP:
sdata->bss = &sdata->u.ap;
break;
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_ADHOC:
/* no special treatment */
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
/* cannot happen */
WARN_ON(1);
break;
}
if (local->open_count == 0) {
res = drv_start(local);
if (res)
goto err_del_bss;
if (local->ops->napi_poll)
napi_enable(&local->napi);
/* we're brought up, everything changes */
hw_reconf_flags = ~0;
ieee80211_led_radio(local, true);
ieee80211_mod_tpt_led_trig(local,
IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
}
/*
* Copy the hopefully now-present MAC address to
* this interface, if it has the special null one.
*/
if (is_zero_ether_addr(dev->dev_addr)) {
memcpy(dev->dev_addr,
local->hw.wiphy->perm_addr,
ETH_ALEN);
memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
if (!is_valid_ether_addr(dev->dev_addr)) {
if (!local->open_count)
drv_stop(local);
return -EADDRNOTAVAIL;
}
}
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
/* no need to tell driver, but set carrier */
if (rtnl_dereference(sdata->bss->beacon))
netif_carrier_on(dev);
else
netif_carrier_off(dev);
break;
case NL80211_IFTYPE_MONITOR:
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
local->cooked_mntrs++;
break;
}
if (local->monitors == 0 && local->open_count == 0) {
res = ieee80211_add_virtual_monitor(local);
if (res)
goto err_stop;
}
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
if (local->monitors == 1) {
local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
}
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
netif_carrier_on(dev);
break;
default:
if (coming_up) {
ieee80211_del_virtual_monitor(local);
res = drv_add_interface(local, sdata);
if (res)
goto err_stop;
res = ieee80211_check_queues(sdata);
if (res)
goto err_del_interface;
}
if (sdata->vif.type == NL80211_IFTYPE_AP) {
local->fif_pspoll++;
local->fif_probe_req++;
ieee80211_configure_filter(local);
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
local->fif_probe_req++;
}
changed |= ieee80211_reset_erp_info(sdata);
ieee80211_bss_info_change_notify(sdata, changed);
if (sdata->vif.type == NL80211_IFTYPE_STATION ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_AP)
netif_carrier_off(dev);
else
netif_carrier_on(dev);
/*
* set default queue parameters so drivers don't
* need to initialise the hardware if the hardware
* doesn't start up with sane defaults
*/
ieee80211_set_wmm_default(sdata, true);
}
set_bit(SDATA_STATE_RUNNING, &sdata->state);
if (sdata->vif.type == NL80211_IFTYPE_WDS) {
/* Create STA entry for the WDS peer */
sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
GFP_KERNEL);
if (!sta) {
res = -ENOMEM;
goto err_del_interface;
}
sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
res = sta_info_insert(sta);
if (res) {
/* STA has been freed */
goto err_del_interface;
}
rate_control_rate_init(sta);
}
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
* error and sync them down to the hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_inc(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_inc(&local->iff_promiscs);
mutex_lock(&local->mtx);
hw_reconf_flags |= __ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
if (coming_up)
local->open_count++;
if (hw_reconf_flags)
ieee80211_hw_config(local, hw_reconf_flags);
ieee80211_recalc_ps(local, -1);
netif_tx_start_all_queues(dev);
return 0;
err_del_interface:
drv_remove_interface(local, sdata);
err_stop:
if (!local->open_count)
drv_stop(local);
err_del_bss:
sdata->bss = NULL;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
list_del(&sdata->u.vlan.list);
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
return res;
}
static int ieee80211_open(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int err;
/* fail early if user set an invalid address */
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type);
if (err)
return err;
return ieee80211_do_open(dev, true);
}
static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
bool going_down)
{
struct ieee80211_local *local = sdata->local;
unsigned long flags;
struct sk_buff *skb, *tmp;
u32 hw_reconf_flags = 0;
int i;
enum nl80211_channel_type orig_ct;
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
if (local->scan_sdata == sdata)
ieee80211_scan_cancel(local);
/*
* Stop TX on this interface first.
*/
netif_tx_stop_all_queues(sdata->dev);
/*
* Purge work for this interface.
*/
ieee80211_work_purge(sdata);
/*
* Remove all stations associated with this interface.
*
* This must be done before calling ops->remove_interface()
* because otherwise we can later invoke ops->sta_notify()
* whenever the STAs are removed, and that invalidates driver
* assumptions about always getting a vif pointer that is valid
* (because if we remove a STA after ops->remove_interface()
* the driver will have removed the vif info already!)
*
* This is relevant only in AP, WDS and mesh modes, since in
* all other modes we've already removed all stations when
* disconnecting etc.
*/
sta_info_flush(local, sdata);
/*
* Don't count this interface for promisc/allmulti while it
* is down. dev_mc_unsync() will invoke set_multicast_list
* on the master interface which will sync these down to the
* hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_dec(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_dec(&local->iff_promiscs);
if (sdata->vif.type == NL80211_IFTYPE_AP) {
local->fif_pspoll--;
local->fif_probe_req--;
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
local->fif_probe_req--;
}
netif_addr_lock_bh(sdata->dev);
spin_lock_bh(&local->filter_lock);
__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
sdata->dev->addr_len);
spin_unlock_bh(&local->filter_lock);
netif_addr_unlock_bh(sdata->dev);
ieee80211_configure_filter(local);
del_timer_sync(&local->dynamic_ps_timer);
cancel_work_sync(&local->dynamic_ps_enable_work);
/* APs need special treatment */
if (sdata->vif.type == NL80211_IFTYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmpsdata;
struct beacon_data *old_beacon =
rtnl_dereference(sdata->u.ap.beacon);
struct sk_buff *old_probe_resp =
rtnl_dereference(sdata->u.ap.probe_resp);
/* sdata_running will return false, so this will disable */
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_ENABLED);
/* remove beacon and probe response */
RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL);
synchronize_rcu();
kfree(old_beacon);
kfree_skb(old_probe_resp);
/* down all dependent devices, that is VLANs */
list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
WARN_ON(!list_empty(&sdata->u.ap.vlans));
/* free all potentially still buffered bcast frames */
local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps_bc_buf);
skb_queue_purge(&sdata->u.ap.ps_bc_buf);
}
if (going_down)
local->open_count--;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
list_del(&sdata->u.vlan.list);
/* no need to tell driver */
break;
case NL80211_IFTYPE_MONITOR:
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
local->cooked_mntrs--;
break;
}
local->monitors--;
if (local->monitors == 0) {
local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
ieee80211_del_virtual_monitor(local);
}
ieee80211_adjust_monitor_flags(sdata, -1);
ieee80211_configure_filter(local);
break;
default:
flush_work(&sdata->work);
/*
* When we get here, the interface is marked down.
* Call synchronize_rcu() to wait for the RX path
* should it be using the interface and enqueuing
* frames at this very time on another CPU.
*/
synchronize_rcu();
skb_queue_purge(&sdata->skb_queue);
/*
* Disable beaconing here for mesh only, AP and IBSS
* are already taken care of.
*/
if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_ENABLED);
/*
* Free all remaining keys, there shouldn't be any,
* except maybe group keys in AP more or WDS?
*/
ieee80211_free_keys(sdata);
if (going_down)
drv_remove_interface(local, sdata);
}
sdata->bss = NULL;
mutex_lock(&local->mtx);
hw_reconf_flags |= __ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
ieee80211_recalc_ps(local, -1);
if (local->open_count == 0) {
if (local->ops->napi_poll)
napi_disable(&local->napi);
ieee80211_clear_tx_pending(local);
ieee80211_stop_device(local);
/* no reconfiguring after stop! */
hw_reconf_flags = 0;
}
/* Re-calculate channel-type, in case there are multiple vifs
* on different channel types.
*/
orig_ct = local->_oper_channel_type;
ieee80211_set_channel_type(local, NULL, NL80211_CHAN_NO_HT);
/* do after stop to avoid reconfiguring when we stop anyway */
if (hw_reconf_flags || (orig_ct != local->_oper_channel_type))
ieee80211_hw_config(local, hw_reconf_flags);
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
skb_queue_walk_safe(&local->pending[i], skb, tmp) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (info->control.vif == &sdata->vif) {
__skb_unlink(skb, &local->pending[i]);
dev_kfree_skb_irq(skb);
}
}
}
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
if (local->monitors == local->open_count && local->monitors > 0)
ieee80211_add_virtual_monitor(local);
}
static int ieee80211_stop(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_do_stop(sdata, true);
return 0;
}
static void ieee80211_set_multicast_list(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
int allmulti, promisc, sdata_allmulti, sdata_promisc;
allmulti = !!(dev->flags & IFF_ALLMULTI);
promisc = !!(dev->flags & IFF_PROMISC);
sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
if (allmulti != sdata_allmulti) {
if (dev->flags & IFF_ALLMULTI)
atomic_inc(&local->iff_allmultis);
else
atomic_dec(&local->iff_allmultis);
sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
}
if (promisc != sdata_promisc) {
if (dev->flags & IFF_PROMISC)
atomic_inc(&local->iff_promiscs);
else
atomic_dec(&local->iff_promiscs);
sdata->flags ^= IEEE80211_SDATA_PROMISC;
}
spin_lock_bh(&local->filter_lock);
__hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len);
spin_unlock_bh(&local->filter_lock);
ieee80211_queue_work(&local->hw, &local->reconfig_filter);
}
/*
* Called when the netdev is removed or, by the code below, before
* the interface type changes.
*/
static void ieee80211_teardown_sdata(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
int flushed;
int i;
/* free extra data */
ieee80211_free_keys(sdata);
ieee80211_debugfs_remove_netdev(sdata);
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
__skb_queue_purge(&sdata->fragments[i].skb_list);
sdata->fragment_next = 0;
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_rmc_free(sdata);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
ieee80211_mgd_teardown(sdata);
flushed = sta_info_flush(local, sdata);
WARN_ON(flushed);
}
static u16 ieee80211_netdev_select_queue(struct net_device *dev,
struct sk_buff *skb)
{
return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
}
static const struct net_device_ops ieee80211_dataif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
.ndo_uninit = ieee80211_teardown_sdata,
.ndo_start_xmit = ieee80211_subif_start_xmit,
.ndo_set_rx_mode = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = ieee80211_change_mac,
.ndo_select_queue = ieee80211_netdev_select_queue,
};
static u16 ieee80211_monitor_select_queue(struct net_device *dev,
struct sk_buff *skb)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee80211_hdr *hdr;
struct ieee80211_radiotap_header *rtap = (void *)skb->data;
if (local->hw.queues < IEEE80211_NUM_ACS)
return 0;
if (skb->len < 4 ||
skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
return 0; /* doesn't matter, frame will be dropped */
hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
return ieee80211_select_queue_80211(local, skb, hdr);
}
static const struct net_device_ops ieee80211_monitorif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
.ndo_uninit = ieee80211_teardown_sdata,
.ndo_start_xmit = ieee80211_monitor_start_xmit,
.ndo_set_rx_mode = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_select_queue = ieee80211_monitor_select_queue,
};
static void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->netdev_ops = &ieee80211_dataif_ops;
dev->destructor = free_netdev;
}
static void ieee80211_iface_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
container_of(work, struct ieee80211_sub_if_data, work);
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct sta_info *sta;
struct ieee80211_ra_tid *ra_tid;
if (!ieee80211_sdata_running(sdata))
return;
if (local->scanning)
return;
/*
* ieee80211_queue_work() should have picked up most cases,
* here we'll pick the rest.
*/
if (WARN(local->suspended,
"interface work scheduled while going to suspend\n"))
return;
/* first process frames */
while ((skb = skb_dequeue(&sdata->skb_queue))) {
struct ieee80211_mgmt *mgmt = (void *)skb->data;
if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) {
ra_tid = (void *)&skb->cb;
ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra,
ra_tid->tid);
} else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) {
ra_tid = (void *)&skb->cb;
ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra,
ra_tid->tid);
} else if (ieee80211_is_action(mgmt->frame_control) &&
mgmt->u.action.category == WLAN_CATEGORY_BACK) {
int len = skb->len;
mutex_lock(&local->sta_mtx);
sta = sta_info_get_bss(sdata, mgmt->sa);
if (sta) {
switch (mgmt->u.action.u.addba_req.action_code) {
case WLAN_ACTION_ADDBA_REQ:
ieee80211_process_addba_request(
local, sta, mgmt, len);
break;
case WLAN_ACTION_ADDBA_RESP:
ieee80211_process_addba_resp(local, sta,
mgmt, len);
break;
case WLAN_ACTION_DELBA:
ieee80211_process_delba(sdata, sta,
mgmt, len);
break;
default:
WARN_ON(1);
break;
}
}
mutex_unlock(&local->sta_mtx);
} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
struct ieee80211_hdr *hdr = (void *)mgmt;
/*
* So the frame isn't mgmt, but frame_control
* is at the right place anyway, of course, so
* the if statement is correct.
*
* Warn if we have other data frame types here,
* they must not get here.
*/
WARN_ON(hdr->frame_control &
cpu_to_le16(IEEE80211_STYPE_NULLFUNC));
WARN_ON(!(hdr->seq_ctrl &
cpu_to_le16(IEEE80211_SCTL_FRAG)));
/*
* This was a fragment of a frame, received while
* a block-ack session was active. That cannot be
* right, so terminate the session.
*/
mutex_lock(&local->sta_mtx);
sta = sta_info_get_bss(sdata, mgmt->sa);
if (sta) {
u16 tid = *ieee80211_get_qos_ctl(hdr) &
IEEE80211_QOS_CTL_TID_MASK;
__ieee80211_stop_rx_ba_session(
sta, tid, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_REQUIRE_SETUP,
true);
}
mutex_unlock(&local->sta_mtx);
} else switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
ieee80211_sta_rx_queued_mgmt(sdata, skb);
break;
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_rx_queued_mgmt(sdata, skb);
break;
case NL80211_IFTYPE_MESH_POINT:
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
break;
default:
WARN(1, "frame for unexpected interface type");
break;
}
kfree_skb(skb);
}
/* then other type-dependent work */
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
ieee80211_sta_work(sdata);
break;
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_work(sdata);
break;
case NL80211_IFTYPE_MESH_POINT:
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
ieee80211_mesh_work(sdata);
break;
default:
break;
}
}
/*
* Helper function to initialise an interface to a specific type.
*/
static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
/* clear type-dependent union */
memset(&sdata->u, 0, sizeof(sdata->u));
/* and set some type-dependent values */
sdata->vif.type = type;
sdata->vif.p2p = false;
sdata->dev->netdev_ops = &ieee80211_dataif_ops;
sdata->wdev.iftype = type;
sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
sdata->control_port_no_encrypt = false;
sdata->noack_map = 0;
/* only monitor differs */
sdata->dev->type = ARPHRD_ETHER;
skb_queue_head_init(&sdata->skb_queue);
INIT_WORK(&sdata->work, ieee80211_iface_work);
switch (type) {
case NL80211_IFTYPE_P2P_GO:
type = NL80211_IFTYPE_AP;
sdata->vif.type = type;
sdata->vif.p2p = true;
/* fall through */
case NL80211_IFTYPE_AP:
skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
INIT_LIST_HEAD(&sdata->u.ap.vlans);
break;
case NL80211_IFTYPE_P2P_CLIENT:
type = NL80211_IFTYPE_STATION;
sdata->vif.type = type;
sdata->vif.p2p = true;
/* fall through */
case NL80211_IFTYPE_STATION:
ieee80211_sta_setup_sdata(sdata);
break;
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_setup_sdata(sdata);
break;
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_init_sdata(sdata);
break;
case NL80211_IFTYPE_MONITOR:
sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
MONITOR_FLAG_OTHER_BSS;
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
BUG();
break;
}
ieee80211_debugfs_add_netdev(sdata);
}
static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
struct ieee80211_local *local = sdata->local;
int ret, err;
enum nl80211_iftype internal_type = type;
bool p2p = false;
ASSERT_RTNL();
if (!local->ops->change_interface)
return -EBUSY;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
/*
* Could maybe also all others here?
* Just not sure how that interacts
* with the RX/config path e.g. for
* mesh.
*/
break;
default:
return -EBUSY;
}
switch (type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
/*
* Could probably support everything
* but WDS here (WDS do_open can fail
* under memory pressure, which this
* code isn't prepared to handle).
*/
break;
case NL80211_IFTYPE_P2P_CLIENT:
p2p = true;
internal_type = NL80211_IFTYPE_STATION;
break;
case NL80211_IFTYPE_P2P_GO:
p2p = true;
internal_type = NL80211_IFTYPE_AP;
break;
default:
return -EBUSY;
}
ret = ieee80211_check_concurrent_iface(sdata, internal_type);
if (ret)
return ret;
ieee80211_do_stop(sdata, false);
ieee80211_teardown_sdata(sdata->dev);
ret = drv_change_interface(local, sdata, internal_type, p2p);
if (ret)
type = sdata->vif.type;
/*
* Ignore return value here, there's not much we can do since
* the driver changed the interface type internally already.
* The warnings will hopefully make driver authors fix it :-)
*/
ieee80211_check_queues(sdata);
ieee80211_setup_sdata(sdata, type);
err = ieee80211_do_open(sdata->dev, false);
WARN(err, "type change: do_open returned %d", err);
return ret;
}
int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
int ret;
ASSERT_RTNL();
if (type == ieee80211_vif_type_p2p(&sdata->vif))
return 0;
/* Setting ad-hoc mode on non-IBSS channel is not supported. */
if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
type == NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
if (ieee80211_sdata_running(sdata)) {
ret = ieee80211_runtime_change_iftype(sdata, type);
if (ret)
return ret;
} else {
/* Purge and reset type-dependent state. */
ieee80211_teardown_sdata(sdata->dev);
ieee80211_setup_sdata(sdata, type);
}
/* reset some values that shouldn't be kept across type changes */
sdata->vif.bss_conf.basic_rates =
ieee80211_mandatory_rates(sdata->local,
sdata->local->hw.conf.channel->band);
sdata->drop_unencrypted = 0;
if (type == NL80211_IFTYPE_STATION)
sdata->u.mgd.use_4addr = false;
return 0;
}
static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
struct net_device *dev,
enum nl80211_iftype type)
{
struct ieee80211_sub_if_data *sdata;
u64 mask, start, addr, val, inc;
u8 *m;
u8 tmp_addr[ETH_ALEN];
int i;
/* default ... something at least */
memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
local->hw.wiphy->n_addresses <= 1)
return;
mutex_lock(&local->iflist_mtx);
switch (type) {
case NL80211_IFTYPE_MONITOR:
/* doesn't matter */
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
/* match up with an AP interface */
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type != NL80211_IFTYPE_AP)
continue;
memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN);
break;
}
/* keep default if no AP interface present */
break;
default:
/* assign a new address if possible -- try n_addresses first */
for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
bool used = false;
list_for_each_entry(sdata, &local->interfaces, list) {
if (memcmp(local->hw.wiphy->addresses[i].addr,
sdata->vif.addr, ETH_ALEN) == 0) {
used = true;
break;
}
}
if (!used) {
memcpy(dev->perm_addr,
local->hw.wiphy->addresses[i].addr,
ETH_ALEN);
break;
}
}
/* try mask if available */
if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
break;
m = local->hw.wiphy->addr_mask;
mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
/* not a contiguous mask ... not handled now! */
printk(KERN_DEBUG "not contiguous\n");
break;
}
m = local->hw.wiphy->perm_addr;
start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
inc = 1ULL<<__ffs64(mask);
val = (start & mask);
addr = (start & ~mask) | (val & mask);
do {
bool used = false;
tmp_addr[5] = addr >> 0*8;
tmp_addr[4] = addr >> 1*8;
tmp_addr[3] = addr >> 2*8;
tmp_addr[2] = addr >> 3*8;
tmp_addr[1] = addr >> 4*8;
tmp_addr[0] = addr >> 5*8;
val += inc;
list_for_each_entry(sdata, &local->interfaces, list) {
if (memcmp(tmp_addr, sdata->vif.addr,
ETH_ALEN) == 0) {
used = true;
break;
}
}
if (!used) {
memcpy(dev->perm_addr, tmp_addr, ETH_ALEN);
break;
}
addr = (start & ~mask) | (val & mask);
} while (addr != start);
break;
}
mutex_unlock(&local->iflist_mtx);
}
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct net_device **new_dev, enum nl80211_iftype type,
struct vif_params *params)
{
struct net_device *ndev;
struct ieee80211_sub_if_data *sdata = NULL;
int ret, i;
int txqs = 1;
ASSERT_RTNL();
if (local->hw.queues >= IEEE80211_NUM_ACS)
txqs = IEEE80211_NUM_ACS;
ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
name, ieee80211_if_setup, txqs, 1);
if (!ndev)
return -ENOMEM;
dev_net_set(ndev, wiphy_net(local->hw.wiphy));
ndev->needed_headroom = local->tx_headroom +
4*6 /* four MAC addresses */
+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
+ 6 /* mesh */
+ 8 /* rfc1042/bridge tunnel */
- ETH_HLEN /* ethernet hard_header_len */
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
ret = dev_alloc_name(ndev, ndev->name);
if (ret < 0)
goto fail;
ieee80211_assign_perm_addr(local, ndev, type);
memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
sdata = netdev_priv(ndev);
ndev->ieee80211_ptr = &sdata->wdev;
memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
memcpy(sdata->name, ndev->name, IFNAMSIZ);
/* initialise type-independent data */
sdata->wdev.wiphy = local->hw.wiphy;
sdata->local = local;
sdata->dev = ndev;
#ifdef CONFIG_INET
sdata->arp_filter_state = true;
#endif
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
skb_queue_head_init(&sdata->fragments[i].skb_list);
INIT_LIST_HEAD(&sdata->key_list);
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[i];
sdata->rc_rateidx_mask[i] =
sband ? (1 << sband->n_bitrates) - 1 : 0;
if (sband)
memcpy(sdata->rc_rateidx_mcs_mask[i],
sband->ht_cap.mcs.rx_mask,
sizeof(sdata->rc_rateidx_mcs_mask[i]));
else
memset(sdata->rc_rateidx_mcs_mask[i], 0,
sizeof(sdata->rc_rateidx_mcs_mask[i]));
}
ieee80211_set_default_queues(sdata);
/* setup type-dependent data */
ieee80211_setup_sdata(sdata, type);
if (params) {
ndev->ieee80211_ptr->use_4addr = params->use_4addr;
if (type == NL80211_IFTYPE_STATION)
sdata->u.mgd.use_4addr = params->use_4addr;
}
ret = register_netdevice(ndev);
if (ret)
goto fail;
mutex_lock(&local->iflist_mtx);
list_add_tail_rcu(&sdata->list, &local->interfaces);
mutex_unlock(&local->iflist_mtx);
if (new_dev)
*new_dev = ndev;
return 0;
fail:
free_netdev(ndev);
return ret;
}
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
{
ASSERT_RTNL();
mutex_lock(&sdata->local->iflist_mtx);
list_del_rcu(&sdata->list);
mutex_unlock(&sdata->local->iflist_mtx);
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_path_flush_by_iface(sdata);
synchronize_rcu();
unregister_netdevice(sdata->dev);
}
/*
* Remove all interfaces, may only be called at hardware unregistration
* time because it doesn't do RCU-safe list removals.
*/
void ieee80211_remove_interfaces(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata, *tmp;
LIST_HEAD(unreg_list);
ASSERT_RTNL();
mutex_lock(&local->iflist_mtx);
list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
list_del(&sdata->list);
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_path_flush_by_iface(sdata);
unregister_netdevice_queue(sdata->dev, &unreg_list);
}
mutex_unlock(&local->iflist_mtx);
unregister_netdevice_many(&unreg_list);
list_del(&unreg_list);
}
static u32 ieee80211_idle_off(struct ieee80211_local *local,
const char *reason)
{
if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
return 0;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
wiphy_debug(local->hw.wiphy, "device no longer idle - %s\n", reason);
#endif
local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
return IEEE80211_CONF_CHANGE_IDLE;
}
static u32 ieee80211_idle_on(struct ieee80211_local *local)
{
if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
return 0;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
wiphy_debug(local->hw.wiphy, "device now idle\n");
#endif
drv_flush(local, false);
local->hw.conf.flags |= IEEE80211_CONF_IDLE;
return IEEE80211_CONF_CHANGE_IDLE;
}
u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
int count = 0;
bool working = false, scanning = false, hw_roc = false;
struct ieee80211_work *wk;
unsigned int led_trig_start = 0, led_trig_stop = 0;
#ifdef CONFIG_PROVE_LOCKING
WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
!lockdep_is_held(&local->iflist_mtx));
#endif
lockdep_assert_held(&local->mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata)) {
sdata->vif.bss_conf.idle = true;
continue;
}
sdata->old_idle = sdata->vif.bss_conf.idle;
/* do not count disabled managed interfaces */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
!sdata->u.mgd.associated &&
!sdata->u.mgd.auth_data &&
!sdata->u.mgd.assoc_data) {
sdata->vif.bss_conf.idle = true;
continue;
}
/* do not count unused IBSS interfaces */
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
!sdata->u.ibss.ssid_len) {
sdata->vif.bss_conf.idle = true;
continue;
}
/* count everything else */
sdata->vif.bss_conf.idle = false;
count++;
}
list_for_each_entry(wk, &local->work_list, list) {
working = true;
wk->sdata->vif.bss_conf.idle = false;
}
if (local->scan_sdata &&
!(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
scanning = true;
local->scan_sdata->vif.bss_conf.idle = false;
}
if (local->hw_roc_channel)
hw_roc = true;
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
if (sdata->old_idle == sdata->vif.bss_conf.idle)
continue;
if (!ieee80211_sdata_running(sdata))
continue;
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
}
if (working || scanning || hw_roc)
led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
else
led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
if (count)
led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
else
led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
if (hw_roc)
return ieee80211_idle_off(local, "hw remain-on-channel");
if (working)
return ieee80211_idle_off(local, "working");
if (scanning)
return ieee80211_idle_off(local, "scanning");
if (!count)
return ieee80211_idle_on(local);
else
return ieee80211_idle_off(local, "in use");
return 0;
}
void ieee80211_recalc_idle(struct ieee80211_local *local)
{
u32 chg;
mutex_lock(&local->iflist_mtx);
chg = __ieee80211_recalc_idle(local);
mutex_unlock(&local->iflist_mtx);
if (chg)
ieee80211_hw_config(local, chg);
}
static int netdev_notify(struct notifier_block *nb,
unsigned long state,
void *ndev)
{
struct net_device *dev = ndev;
struct ieee80211_sub_if_data *sdata;
if (state != NETDEV_CHANGENAME)
return 0;
if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy)
return 0;
if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid)
return 0;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
memcpy(sdata->name, dev->name, IFNAMSIZ);
ieee80211_debugfs_rename_netdev(sdata);
return 0;
}
static struct notifier_block mac80211_netdev_notifier = {
.notifier_call = netdev_notify,
};
int ieee80211_iface_init(void)
{
return register_netdevice_notifier(&mac80211_netdev_notifier);
}
void ieee80211_iface_exit(void)
{
unregister_netdevice_notifier(&mac80211_netdev_notifier);
}