mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 00:42:16 +00:00
0937282036
Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
905 lines
26 KiB
C
905 lines
26 KiB
C
/*******************************************************************
|
|
* This file is part of the Emulex Linux Device Driver for *
|
|
* Fibre Channel Host Bus Adapters. *
|
|
* Copyright (C) 2004-2007 Emulex. All rights reserved. *
|
|
* EMULEX and SLI are trademarks of Emulex. *
|
|
* www.emulex.com *
|
|
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or *
|
|
* modify it under the terms of version 2 of the GNU General *
|
|
* Public License as published by the Free Software Foundation. *
|
|
* This program is distributed in the hope that it will be useful. *
|
|
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
|
|
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
|
|
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
|
|
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
|
|
* TO BE LEGALLY INVALID. See the GNU General Public License for *
|
|
* more details, a copy of which can be found in the file COPYING *
|
|
* included with this package. *
|
|
*******************************************************************/
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
|
|
#include "lpfc_hw.h"
|
|
#include "lpfc_sli.h"
|
|
#include "lpfc_disc.h"
|
|
#include "lpfc_scsi.h"
|
|
#include "lpfc.h"
|
|
#include "lpfc_logmsg.h"
|
|
#include "lpfc_crtn.h"
|
|
#include "lpfc_compat.h"
|
|
|
|
/**********************************************/
|
|
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
|
|
{
|
|
MAILBOX_t *mb;
|
|
void *ctx;
|
|
|
|
mb = &pmb->mb;
|
|
ctx = pmb->context2;
|
|
|
|
/* Setup to dump VPD region */
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
mb->mbxCommand = MBX_DUMP_MEMORY;
|
|
mb->un.varDmp.cv = 1;
|
|
mb->un.varDmp.type = DMP_NV_PARAMS;
|
|
mb->un.varDmp.entry_index = offset;
|
|
mb->un.varDmp.region_id = DMP_REGION_VPD;
|
|
mb->un.varDmp.word_cnt = (DMP_RSP_SIZE / sizeof (uint32_t));
|
|
mb->un.varDmp.co = 0;
|
|
mb->un.varDmp.resp_offset = 0;
|
|
pmb->context2 = ctx;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_read_nv Issue a READ NVPARAM */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
mb->mbxCommand = MBX_READ_NV;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_config_async Issue a */
|
|
/* MBX_ASYNC_EVT_ENABLE mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
|
|
uint32_t ring)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
mb->mbxCommand = MBX_ASYNCEVT_ENABLE;
|
|
mb->un.varCfgAsyncEvent.ring = ring;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_heart_beat Issue a HEART_BEAT */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
mb->mbxCommand = MBX_HEARTBEAT;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_read_la Issue a READ LA */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
int
|
|
lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
|
|
{
|
|
MAILBOX_t *mb;
|
|
struct lpfc_sli *psli;
|
|
|
|
psli = &phba->sli;
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
INIT_LIST_HEAD(&mp->list);
|
|
mb->mbxCommand = MBX_READ_LA64;
|
|
mb->un.varReadLA.un.lilpBde64.tus.f.bdeSize = 128;
|
|
mb->un.varReadLA.un.lilpBde64.addrHigh = putPaddrHigh(mp->phys);
|
|
mb->un.varReadLA.un.lilpBde64.addrLow = putPaddrLow(mp->phys);
|
|
|
|
/* Save address for later completion and set the owner to host so that
|
|
* the FW knows this mailbox is available for processing.
|
|
*/
|
|
pmb->context1 = (uint8_t *) mp;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return (0);
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_clear_la Issue a CLEAR LA */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->un.varClearLA.eventTag = phba->fc_eventTag;
|
|
mb->mbxCommand = MBX_CLEAR_LA;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**************************************************/
|
|
/* lpfc_config_link Issue a CONFIG LINK */
|
|
/* mailbox command */
|
|
/**************************************************/
|
|
void
|
|
lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
struct lpfc_vport *vport = phba->pport;
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
/* NEW_FEATURE
|
|
* SLI-2, Coalescing Response Feature.
|
|
*/
|
|
if (phba->cfg_cr_delay) {
|
|
mb->un.varCfgLnk.cr = 1;
|
|
mb->un.varCfgLnk.ci = 1;
|
|
mb->un.varCfgLnk.cr_delay = phba->cfg_cr_delay;
|
|
mb->un.varCfgLnk.cr_count = phba->cfg_cr_count;
|
|
}
|
|
|
|
mb->un.varCfgLnk.myId = vport->fc_myDID;
|
|
mb->un.varCfgLnk.edtov = phba->fc_edtov;
|
|
mb->un.varCfgLnk.arbtov = phba->fc_arbtov;
|
|
mb->un.varCfgLnk.ratov = phba->fc_ratov;
|
|
mb->un.varCfgLnk.rttov = phba->fc_rttov;
|
|
mb->un.varCfgLnk.altov = phba->fc_altov;
|
|
mb->un.varCfgLnk.crtov = phba->fc_crtov;
|
|
mb->un.varCfgLnk.citov = phba->fc_citov;
|
|
|
|
if (phba->cfg_ack0)
|
|
mb->un.varCfgLnk.ack0_enable = 1;
|
|
|
|
mb->mbxCommand = MBX_CONFIG_LINK;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_init_link Issue an INIT LINK */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_init_link(struct lpfc_hba * phba,
|
|
LPFC_MBOXQ_t * pmb, uint32_t topology, uint32_t linkspeed)
|
|
{
|
|
lpfc_vpd_t *vpd;
|
|
struct lpfc_sli *psli;
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
psli = &phba->sli;
|
|
switch (topology) {
|
|
case FLAGS_TOPOLOGY_MODE_LOOP_PT:
|
|
mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_LOOP;
|
|
mb->un.varInitLnk.link_flags |= FLAGS_TOPOLOGY_FAILOVER;
|
|
break;
|
|
case FLAGS_TOPOLOGY_MODE_PT_PT:
|
|
mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT;
|
|
break;
|
|
case FLAGS_TOPOLOGY_MODE_LOOP:
|
|
mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_LOOP;
|
|
break;
|
|
case FLAGS_TOPOLOGY_MODE_PT_LOOP:
|
|
mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT;
|
|
mb->un.varInitLnk.link_flags |= FLAGS_TOPOLOGY_FAILOVER;
|
|
break;
|
|
case FLAGS_LOCAL_LB:
|
|
mb->un.varInitLnk.link_flags = FLAGS_LOCAL_LB;
|
|
break;
|
|
}
|
|
|
|
/* Enable asynchronous ABTS responses from firmware */
|
|
mb->un.varInitLnk.link_flags |= FLAGS_IMED_ABORT;
|
|
|
|
/* NEW_FEATURE
|
|
* Setting up the link speed
|
|
*/
|
|
vpd = &phba->vpd;
|
|
if (vpd->rev.feaLevelHigh >= 0x02){
|
|
switch(linkspeed){
|
|
case LINK_SPEED_1G:
|
|
case LINK_SPEED_2G:
|
|
case LINK_SPEED_4G:
|
|
case LINK_SPEED_8G:
|
|
mb->un.varInitLnk.link_flags |=
|
|
FLAGS_LINK_SPEED;
|
|
mb->un.varInitLnk.link_speed = linkspeed;
|
|
break;
|
|
case LINK_SPEED_AUTO:
|
|
default:
|
|
mb->un.varInitLnk.link_speed =
|
|
LINK_SPEED_AUTO;
|
|
break;
|
|
}
|
|
|
|
}
|
|
else
|
|
mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO;
|
|
|
|
mb->mbxCommand = (volatile uint8_t)MBX_INIT_LINK;
|
|
mb->mbxOwner = OWN_HOST;
|
|
mb->un.varInitLnk.fabric_AL_PA = phba->fc_pref_ALPA;
|
|
return;
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_read_sparam Issue a READ SPARAM */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
int
|
|
lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
|
|
{
|
|
struct lpfc_dmabuf *mp;
|
|
MAILBOX_t *mb;
|
|
struct lpfc_sli *psli;
|
|
|
|
psli = &phba->sli;
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->mbxOwner = OWN_HOST;
|
|
|
|
/* Get a buffer to hold the HBAs Service Parameters */
|
|
|
|
mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
|
|
if (mp)
|
|
mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
|
|
if (!mp || !mp->virt) {
|
|
kfree(mp);
|
|
mb->mbxCommand = MBX_READ_SPARM64;
|
|
/* READ_SPARAM: no buffers */
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
|
|
"0301 READ_SPARAM: no buffers\n");
|
|
return (1);
|
|
}
|
|
INIT_LIST_HEAD(&mp->list);
|
|
mb->mbxCommand = MBX_READ_SPARM64;
|
|
mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
|
|
mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys);
|
|
mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys);
|
|
mb->un.varRdSparm.vpi = vpi;
|
|
|
|
/* save address for completion */
|
|
pmb->context1 = mp;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/********************************************/
|
|
/* lpfc_unreg_did Issue a UNREG_DID */
|
|
/* mailbox command */
|
|
/********************************************/
|
|
void
|
|
lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did,
|
|
LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->un.varUnregDID.did = did;
|
|
mb->un.varUnregDID.vpi = vpi;
|
|
|
|
mb->mbxCommand = MBX_UNREG_D_ID;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_read_nv Issue a READ CONFIG */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->mbxCommand = MBX_READ_CONFIG;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/*************************************************/
|
|
/* lpfc_read_lnk_stat Issue a READ LINK STATUS */
|
|
/* mailbox command */
|
|
/*************************************************/
|
|
void
|
|
lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->mbxCommand = MBX_READ_LNK_STAT;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/********************************************/
|
|
/* lpfc_reg_login Issue a REG_LOGIN */
|
|
/* mailbox command */
|
|
/********************************************/
|
|
int
|
|
lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
|
|
uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag)
|
|
{
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
uint8_t *sparam;
|
|
struct lpfc_dmabuf *mp;
|
|
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->un.varRegLogin.rpi = 0;
|
|
mb->un.varRegLogin.vpi = vpi;
|
|
mb->un.varRegLogin.did = did;
|
|
mb->un.varWords[30] = flag; /* Set flag to issue action on cmpl */
|
|
|
|
mb->mbxOwner = OWN_HOST;
|
|
|
|
/* Get a buffer to hold NPorts Service Parameters */
|
|
mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
|
|
if (mp)
|
|
mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
|
|
if (!mp || !mp->virt) {
|
|
kfree(mp);
|
|
mb->mbxCommand = MBX_REG_LOGIN64;
|
|
/* REG_LOGIN: no buffers */
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
|
|
"0302 REG_LOGIN: no buffers, VPI:%d DID:x%x, "
|
|
"flag x%x\n", vpi, did, flag);
|
|
return (1);
|
|
}
|
|
INIT_LIST_HEAD(&mp->list);
|
|
sparam = mp->virt;
|
|
|
|
/* Copy param's into a new buffer */
|
|
memcpy(sparam, param, sizeof (struct serv_parm));
|
|
|
|
/* save address for completion */
|
|
pmb->context1 = (uint8_t *) mp;
|
|
|
|
mb->mbxCommand = MBX_REG_LOGIN64;
|
|
mb->un.varRegLogin.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
|
|
mb->un.varRegLogin.un.sp64.addrHigh = putPaddrHigh(mp->phys);
|
|
mb->un.varRegLogin.un.sp64.addrLow = putPaddrLow(mp->phys);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**********************************************/
|
|
/* lpfc_unreg_login Issue a UNREG_LOGIN */
|
|
/* mailbox command */
|
|
/**********************************************/
|
|
void
|
|
lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
|
|
LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb;
|
|
|
|
mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->un.varUnregLogin.rpi = (uint16_t) rpi;
|
|
mb->un.varUnregLogin.rsvd1 = 0;
|
|
mb->un.varUnregLogin.vpi = vpi;
|
|
|
|
mb->mbxCommand = MBX_UNREG_LOGIN;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
/**************************************************/
|
|
/* lpfc_reg_vpi Issue a REG_VPI */
|
|
/* mailbox command */
|
|
/**************************************************/
|
|
void
|
|
lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
|
|
LPFC_MBOXQ_t *pmb)
|
|
{
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->un.varRegVpi.vpi = vpi;
|
|
mb->un.varRegVpi.sid = sid;
|
|
|
|
mb->mbxCommand = MBX_REG_VPI;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
|
|
}
|
|
|
|
/**************************************************/
|
|
/* lpfc_unreg_vpi Issue a UNREG_VNPI */
|
|
/* mailbox command */
|
|
/**************************************************/
|
|
void
|
|
lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
|
|
{
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->un.varUnregVpi.vpi = vpi;
|
|
|
|
mb->mbxCommand = MBX_UNREG_VPI;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
|
|
}
|
|
|
|
static void
|
|
lpfc_config_pcb_setup(struct lpfc_hba * phba)
|
|
{
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
struct lpfc_sli_ring *pring;
|
|
PCB_t *pcbp = &phba->slim2p->pcb;
|
|
dma_addr_t pdma_addr;
|
|
uint32_t offset;
|
|
uint32_t iocbCnt = 0;
|
|
int i;
|
|
|
|
pcbp->maxRing = (psli->num_rings - 1);
|
|
|
|
for (i = 0; i < psli->num_rings; i++) {
|
|
pring = &psli->ring[i];
|
|
|
|
pring->sizeCiocb = phba->sli_rev == 3 ? SLI3_IOCB_CMD_SIZE:
|
|
SLI2_IOCB_CMD_SIZE;
|
|
pring->sizeRiocb = phba->sli_rev == 3 ? SLI3_IOCB_RSP_SIZE:
|
|
SLI2_IOCB_RSP_SIZE;
|
|
/* A ring MUST have both cmd and rsp entries defined to be
|
|
valid */
|
|
if ((pring->numCiocb == 0) || (pring->numRiocb == 0)) {
|
|
pcbp->rdsc[i].cmdEntries = 0;
|
|
pcbp->rdsc[i].rspEntries = 0;
|
|
pcbp->rdsc[i].cmdAddrHigh = 0;
|
|
pcbp->rdsc[i].rspAddrHigh = 0;
|
|
pcbp->rdsc[i].cmdAddrLow = 0;
|
|
pcbp->rdsc[i].rspAddrLow = 0;
|
|
pring->cmdringaddr = NULL;
|
|
pring->rspringaddr = NULL;
|
|
continue;
|
|
}
|
|
/* Command ring setup for ring */
|
|
pring->cmdringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt];
|
|
pcbp->rdsc[i].cmdEntries = pring->numCiocb;
|
|
|
|
offset = (uint8_t *) &phba->slim2p->IOCBs[iocbCnt] -
|
|
(uint8_t *) phba->slim2p;
|
|
pdma_addr = phba->slim2p_mapping + offset;
|
|
pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr);
|
|
pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr);
|
|
iocbCnt += pring->numCiocb;
|
|
|
|
/* Response ring setup for ring */
|
|
pring->rspringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt];
|
|
|
|
pcbp->rdsc[i].rspEntries = pring->numRiocb;
|
|
offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] -
|
|
(uint8_t *)phba->slim2p;
|
|
pdma_addr = phba->slim2p_mapping + offset;
|
|
pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr);
|
|
pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr);
|
|
iocbCnt += pring->numRiocb;
|
|
}
|
|
}
|
|
|
|
void
|
|
lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
mb->un.varRdRev.cv = 1;
|
|
mb->un.varRdRev.v3req = 1; /* Request SLI3 info */
|
|
mb->mbxCommand = MBX_READ_REV;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
static void
|
|
lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb,
|
|
struct lpfc_hbq_init *hbq_desc)
|
|
{
|
|
hbqmb->profiles.profile2.seqlenbcnt = hbq_desc->seqlenbcnt;
|
|
hbqmb->profiles.profile2.maxlen = hbq_desc->maxlen;
|
|
hbqmb->profiles.profile2.seqlenoff = hbq_desc->seqlenoff;
|
|
}
|
|
|
|
static void
|
|
lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb,
|
|
struct lpfc_hbq_init *hbq_desc)
|
|
{
|
|
hbqmb->profiles.profile3.seqlenbcnt = hbq_desc->seqlenbcnt;
|
|
hbqmb->profiles.profile3.maxlen = hbq_desc->maxlen;
|
|
hbqmb->profiles.profile3.cmdcodeoff = hbq_desc->cmdcodeoff;
|
|
hbqmb->profiles.profile3.seqlenoff = hbq_desc->seqlenoff;
|
|
memcpy(&hbqmb->profiles.profile3.cmdmatch, hbq_desc->cmdmatch,
|
|
sizeof(hbqmb->profiles.profile3.cmdmatch));
|
|
}
|
|
|
|
static void
|
|
lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb,
|
|
struct lpfc_hbq_init *hbq_desc)
|
|
{
|
|
hbqmb->profiles.profile5.seqlenbcnt = hbq_desc->seqlenbcnt;
|
|
hbqmb->profiles.profile5.maxlen = hbq_desc->maxlen;
|
|
hbqmb->profiles.profile5.cmdcodeoff = hbq_desc->cmdcodeoff;
|
|
hbqmb->profiles.profile5.seqlenoff = hbq_desc->seqlenoff;
|
|
memcpy(&hbqmb->profiles.profile5.cmdmatch, hbq_desc->cmdmatch,
|
|
sizeof(hbqmb->profiles.profile5.cmdmatch));
|
|
}
|
|
|
|
void
|
|
lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id,
|
|
struct lpfc_hbq_init *hbq_desc,
|
|
uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb)
|
|
{
|
|
int i;
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
struct config_hbq_var *hbqmb = &mb->un.varCfgHbq;
|
|
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
hbqmb->hbqId = id;
|
|
hbqmb->entry_count = hbq_desc->entry_count; /* # entries in HBQ */
|
|
hbqmb->recvNotify = hbq_desc->rn; /* Receive
|
|
* Notification */
|
|
hbqmb->numMask = hbq_desc->mask_count; /* # R_CTL/TYPE masks
|
|
* # in words 0-19 */
|
|
hbqmb->profile = hbq_desc->profile; /* Selection profile:
|
|
* 0 = all,
|
|
* 7 = logentry */
|
|
hbqmb->ringMask = hbq_desc->ring_mask; /* Binds HBQ to a ring
|
|
* e.g. Ring0=b0001,
|
|
* ring2=b0100 */
|
|
hbqmb->headerLen = hbq_desc->headerLen; /* 0 if not profile 4
|
|
* or 5 */
|
|
hbqmb->logEntry = hbq_desc->logEntry; /* Set to 1 if this
|
|
* HBQ will be used
|
|
* for LogEntry
|
|
* buffers */
|
|
hbqmb->hbqaddrLow = putPaddrLow(phba->hbqslimp.phys) +
|
|
hbq_entry_index * sizeof(struct lpfc_hbq_entry);
|
|
hbqmb->hbqaddrHigh = putPaddrHigh(phba->hbqslimp.phys);
|
|
|
|
mb->mbxCommand = MBX_CONFIG_HBQ;
|
|
mb->mbxOwner = OWN_HOST;
|
|
|
|
/* Copy info for profiles 2,3,5. Other
|
|
* profiles this area is reserved
|
|
*/
|
|
if (hbq_desc->profile == 2)
|
|
lpfc_build_hbq_profile2(hbqmb, hbq_desc);
|
|
else if (hbq_desc->profile == 3)
|
|
lpfc_build_hbq_profile3(hbqmb, hbq_desc);
|
|
else if (hbq_desc->profile == 5)
|
|
lpfc_build_hbq_profile5(hbqmb, hbq_desc);
|
|
|
|
/* Return if no rctl / type masks for this HBQ */
|
|
if (!hbq_desc->mask_count)
|
|
return;
|
|
|
|
/* Otherwise we setup specific rctl / type masks for this HBQ */
|
|
for (i = 0; i < hbq_desc->mask_count; i++) {
|
|
hbqmb->hbqMasks[i].tmatch = hbq_desc->hbqMasks[i].tmatch;
|
|
hbqmb->hbqMasks[i].tmask = hbq_desc->hbqMasks[i].tmask;
|
|
hbqmb->hbqMasks[i].rctlmatch = hbq_desc->hbqMasks[i].rctlmatch;
|
|
hbqmb->hbqMasks[i].rctlmask = hbq_desc->hbqMasks[i].rctlmask;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
|
|
void
|
|
lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
int i;
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
struct lpfc_sli *psli;
|
|
struct lpfc_sli_ring *pring;
|
|
|
|
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
|
|
|
|
mb->un.varCfgRing.ring = ring;
|
|
mb->un.varCfgRing.maxOrigXchg = 0;
|
|
mb->un.varCfgRing.maxRespXchg = 0;
|
|
mb->un.varCfgRing.recvNotify = 1;
|
|
|
|
psli = &phba->sli;
|
|
pring = &psli->ring[ring];
|
|
mb->un.varCfgRing.numMask = pring->num_mask;
|
|
mb->mbxCommand = MBX_CONFIG_RING;
|
|
mb->mbxOwner = OWN_HOST;
|
|
|
|
/* Is this ring configured for a specific profile */
|
|
if (pring->prt[0].profile) {
|
|
mb->un.varCfgRing.profile = pring->prt[0].profile;
|
|
return;
|
|
}
|
|
|
|
/* Otherwise we setup specific rctl / type masks for this ring */
|
|
for (i = 0; i < pring->num_mask; i++) {
|
|
mb->un.varCfgRing.rrRegs[i].rval = pring->prt[i].rctl;
|
|
if (mb->un.varCfgRing.rrRegs[i].rval != FC_ELS_REQ)
|
|
mb->un.varCfgRing.rrRegs[i].rmask = 0xff;
|
|
else
|
|
mb->un.varCfgRing.rrRegs[i].rmask = 0xfe;
|
|
mb->un.varCfgRing.rrRegs[i].tval = pring->prt[i].type;
|
|
mb->un.varCfgRing.rrRegs[i].tmask = 0xff;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
void
|
|
lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
|
|
{
|
|
MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr;
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
dma_addr_t pdma_addr;
|
|
uint32_t bar_low, bar_high;
|
|
size_t offset;
|
|
struct lpfc_hgp hgp;
|
|
int i;
|
|
uint32_t pgp_offset;
|
|
|
|
memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
|
|
mb->mbxCommand = MBX_CONFIG_PORT;
|
|
mb->mbxOwner = OWN_HOST;
|
|
|
|
mb->un.varCfgPort.pcbLen = sizeof(PCB_t);
|
|
|
|
offset = (uint8_t *)&phba->slim2p->pcb - (uint8_t *)phba->slim2p;
|
|
pdma_addr = phba->slim2p_mapping + offset;
|
|
mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr);
|
|
mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr);
|
|
|
|
/* If HBA supports SLI=3 ask for it */
|
|
|
|
if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
|
|
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
|
|
mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
|
|
if (phba->max_vpi && phba->cfg_enable_npiv &&
|
|
phba->vpd.sli3Feat.cmv) {
|
|
mb->un.varCfgPort.max_vpi = phba->max_vpi;
|
|
mb->un.varCfgPort.cmv = 1;
|
|
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
|
|
} else
|
|
mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
|
|
} else
|
|
phba->sli_rev = 2;
|
|
mb->un.varCfgPort.sli_mode = phba->sli_rev;
|
|
|
|
/* Now setup pcb */
|
|
phba->slim2p->pcb.type = TYPE_NATIVE_SLI2;
|
|
phba->slim2p->pcb.feature = FEATURE_INITIAL_SLI2;
|
|
|
|
/* Setup Mailbox pointers */
|
|
phba->slim2p->pcb.mailBoxSize = offsetof(MAILBOX_t, us) +
|
|
sizeof(struct sli2_desc);
|
|
offset = (uint8_t *)&phba->slim2p->mbx - (uint8_t *)phba->slim2p;
|
|
pdma_addr = phba->slim2p_mapping + offset;
|
|
phba->slim2p->pcb.mbAddrHigh = putPaddrHigh(pdma_addr);
|
|
phba->slim2p->pcb.mbAddrLow = putPaddrLow(pdma_addr);
|
|
|
|
/*
|
|
* Setup Host Group ring pointer.
|
|
*
|
|
* For efficiency reasons, the ring get/put pointers can be
|
|
* placed in adapter memory (SLIM) rather than in host memory.
|
|
* This allows firmware to avoid PCI reads/writes when updating
|
|
* and checking pointers.
|
|
*
|
|
* The firmware recognizes the use of SLIM memory by comparing
|
|
* the address of the get/put pointers structure with that of
|
|
* the SLIM BAR (BAR0).
|
|
*
|
|
* Caution: be sure to use the PCI config space value of BAR0/BAR1
|
|
* (the hardware's view of the base address), not the OS's
|
|
* value of pci_resource_start() as the OS value may be a cookie
|
|
* for ioremap/iomap.
|
|
*/
|
|
|
|
|
|
pci_read_config_dword(phba->pcidev, PCI_BASE_ADDRESS_0, &bar_low);
|
|
pci_read_config_dword(phba->pcidev, PCI_BASE_ADDRESS_1, &bar_high);
|
|
|
|
/*
|
|
* Set up HGP - Port Memory
|
|
*
|
|
* The port expects the host get/put pointers to reside in memory
|
|
* following the "non-diagnostic" mode mailbox (32 words, 0x80 bytes)
|
|
* area of SLIM. In SLI-2 mode, there's an additional 16 reserved
|
|
* words (0x40 bytes). This area is not reserved if HBQs are
|
|
* configured in SLI-3.
|
|
*
|
|
* CR0Put - SLI2(no HBQs) = 0xc0, With HBQs = 0x80
|
|
* RR0Get 0xc4 0x84
|
|
* CR1Put 0xc8 0x88
|
|
* RR1Get 0xcc 0x8c
|
|
* CR2Put 0xd0 0x90
|
|
* RR2Get 0xd4 0x94
|
|
* CR3Put 0xd8 0x98
|
|
* RR3Get 0xdc 0x9c
|
|
*
|
|
* Reserved 0xa0-0xbf
|
|
* If HBQs configured:
|
|
* HBQ 0 Put ptr 0xc0
|
|
* HBQ 1 Put ptr 0xc4
|
|
* HBQ 2 Put ptr 0xc8
|
|
* ......
|
|
* HBQ(M-1)Put Pointer 0xc0+(M-1)*4
|
|
*
|
|
*/
|
|
|
|
if (phba->sli_rev == 3) {
|
|
phba->host_gp = &mb_slim->us.s3.host[0];
|
|
phba->hbq_put = &mb_slim->us.s3.hbq_put[0];
|
|
} else {
|
|
phba->host_gp = &mb_slim->us.s2.host[0];
|
|
phba->hbq_put = NULL;
|
|
}
|
|
|
|
/* mask off BAR0's flag bits 0 - 3 */
|
|
phba->slim2p->pcb.hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) +
|
|
(void __iomem *) phba->host_gp -
|
|
(void __iomem *)phba->MBslimaddr;
|
|
if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64)
|
|
phba->slim2p->pcb.hgpAddrHigh = bar_high;
|
|
else
|
|
phba->slim2p->pcb.hgpAddrHigh = 0;
|
|
/* write HGP data to SLIM at the required longword offset */
|
|
memset(&hgp, 0, sizeof(struct lpfc_hgp));
|
|
|
|
for (i=0; i < phba->sli.num_rings; i++) {
|
|
lpfc_memcpy_to_slim(phba->host_gp + i, &hgp,
|
|
sizeof(*phba->host_gp));
|
|
}
|
|
|
|
/* Setup Port Group ring pointer */
|
|
if (phba->sli_rev == 3)
|
|
pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s3_pgp.port -
|
|
(uint8_t *)phba->slim2p;
|
|
else
|
|
pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port -
|
|
(uint8_t *)phba->slim2p;
|
|
|
|
pdma_addr = phba->slim2p_mapping + pgp_offset;
|
|
phba->slim2p->pcb.pgpAddrHigh = putPaddrHigh(pdma_addr);
|
|
phba->slim2p->pcb.pgpAddrLow = putPaddrLow(pdma_addr);
|
|
phba->hbq_get = &phba->slim2p->mbx.us.s3_pgp.hbq_get[0];
|
|
|
|
/* Use callback routine to setp rings in the pcb */
|
|
lpfc_config_pcb_setup(phba);
|
|
|
|
/* special handling for LC HBAs */
|
|
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
|
|
uint32_t hbainit[5];
|
|
|
|
lpfc_hba_init(phba, hbainit);
|
|
|
|
memcpy(&mb->un.varCfgPort.hbainit, hbainit, 20);
|
|
}
|
|
|
|
/* Swap PCB if needed */
|
|
lpfc_sli_pcimem_bcopy(&phba->slim2p->pcb, &phba->slim2p->pcb,
|
|
sizeof(PCB_t));
|
|
}
|
|
|
|
void
|
|
lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
|
|
{
|
|
MAILBOX_t *mb = &pmb->mb;
|
|
|
|
memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
|
|
mb->mbxCommand = MBX_KILL_BOARD;
|
|
mb->mbxOwner = OWN_HOST;
|
|
return;
|
|
}
|
|
|
|
void
|
|
lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
|
|
{
|
|
struct lpfc_sli *psli;
|
|
|
|
psli = &phba->sli;
|
|
|
|
list_add_tail(&mbq->list, &psli->mboxq);
|
|
|
|
psli->mboxq_cnt++;
|
|
|
|
return;
|
|
}
|
|
|
|
LPFC_MBOXQ_t *
|
|
lpfc_mbox_get(struct lpfc_hba * phba)
|
|
{
|
|
LPFC_MBOXQ_t *mbq = NULL;
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
|
|
list_remove_head((&psli->mboxq), mbq, LPFC_MBOXQ_t, list);
|
|
if (mbq)
|
|
psli->mboxq_cnt--;
|
|
|
|
return mbq;
|
|
}
|
|
|
|
void
|
|
lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
|
|
{
|
|
/* This function expects to be called from interupt context */
|
|
spin_lock(&phba->hbalock);
|
|
list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
|
|
spin_unlock(&phba->hbalock);
|
|
return;
|
|
}
|
|
|
|
int
|
|
lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case MBX_WRITE_NV: /* 0x03 */
|
|
case MBX_UPDATE_CFG: /* 0x1B */
|
|
case MBX_DOWN_LOAD: /* 0x1C */
|
|
case MBX_DEL_LD_ENTRY: /* 0x1D */
|
|
case MBX_LOAD_AREA: /* 0x81 */
|
|
case MBX_WRITE_WWN: /* 0x98 */
|
|
case MBX_LOAD_EXP_ROM: /* 0x9C */
|
|
return LPFC_MBOX_TMO_FLASH_CMD;
|
|
}
|
|
return LPFC_MBOX_TMO;
|
|
}
|