Russell King 10aa5a35e3 SPI: fix over-eager devm_xxx() conversion ... 1a77b127ae (OMAP : SPI : use devm_* functions) converted the SPI device controller state to use devm_kzalloc(). Unfortunately, this is used against an unbound struct device, which results in the following when the device is bound to its driver: ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/drivers/base/dd.c:257 driver_probe_device+0x78/0x21c() Modules linked in: Backtrace: [<c0017d0c>] (dump_backtrace+0x0/0x10c) from [<c033e208>] (dump_stack+0x18/0x1c) r7:00000000 r6:c01ff28c r5:c040050c r4:00000101 [<c033e1f0>] (dump_stack+0x0/0x1c) from [<c00337ec>] (warn_slowpath_common+0x58/0x70) [<c0033794>] (warn_slowpath_common+0x0/0x70) from [<c0033828>] (warn_slowpath_null+0x24/0x2c) [<c0033804>] (warn_slowpath_null+0x0/0x2c) from [<c01ff28c>] (driver_probe_device+0x78/0x21c) [<c01ff214>] (driver_probe_device+0x0/0x21c) from [<c01ff49c>] (__driver_attach+0x6c/0x90) [<c01ff430>] (__driver_attach+0x0/0x90) from [<c01fda70>] (bus_for_each_dev+0x58/0x98) [<c01fda18>] (bus_for_each_dev+0x0/0x98) from [<c01ff0f4>] (driver_attach+0x20/0x28) [<c01ff0d4>] (driver_attach+0x0/0x28) from [<c01fe2f4>] (bus_add_driver+0xb4/0x230) [<c01fe240>] (bus_add_driver+0x0/0x230) from [<c01ffb24>] (driver_register+0xac/0x138) [<c01ffa78>] (driver_register+0x0/0x138) from [<c0215d4c>] (spi_register_driver+0x4c/0x60) [<c0215d00>] (spi_register_driver+0x0/0x60) from [<c045414c>] (ks8851_init+0x14/0x1c) [<c0454138>] (ks8851_init+0x0/0x1c) from [<c0008770>] (do_one_initcall+0x9c/0x164) [<c00086d4>] (do_one_initcall+0x0/0x164) from [<c0436410>] (kernel_init+0x128/0x210) [<c04362e8>] (kernel_init+0x0/0x210) from [<c0038754>] (do_exit+0x0/0x72c) ---[ end trace 4dcda79f5e89dd84 ]--- ks8851 spi1.0: message enable is 0 ks8851 spi1.0: eth0: revision 0, MAC 08:00:28:01:4d:c6, IRQ 194, has EEPROM Fix this by partially reverting the original commit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2012-06-18 11:27:04 +01:00
..
Kconfig	Merge branch 'next/devel-s3c24xx-hsspi' into next/devel-samsung	2012-05-14 18:22:46 +09:00
Makefile
spi-altera.c
spi-ath79.c	spi: By default setup spi_masters with 1 chipselect and dynamics bus number	2012-05-19 23:42:08 -06:00
spi-atmel.c
spi-au1550.c
spi-bcm63xx.c
spi-bfin5xx.c
spi-bfin-sport.c
spi-bitbang-txrx.h
spi-bitbang.c
spi-butterfly.c
spi-coldfire-qspi.c	spi: refactor spi-coldfire-qspi to use SPI queue framework.	2012-05-19 22:57:27 -06:00
spi-davinci.c
spi-dw-mid.c
spi-dw-mmio.c
spi-dw-pci.c
spi-dw.c
spi-dw.h
spi-ep93xx.c	spi/ep93xx: clean probe/remove routines	2012-05-09 18:37:42 -06:00
spi-fsl-espi.c
spi-fsl-lib.c
spi-fsl-lib.h
spi-fsl-spi.c	spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_control	2012-05-19 23:12:06 -06:00
spi-gpio.c
spi-imx.c	Merge branch 'imx/pinctrl' into imx/clock	2012-05-14 15:30:52 +02:00
spi-lm70llp.c	spi: By default setup spi_masters with 1 chipselect and dynamics bus number	2012-05-19 23:42:08 -06:00
spi-mpc52xx-psc.c
spi-mpc52xx.c	spi: By default setup spi_masters with 1 chipselect and dynamics bus number	2012-05-19 23:42:08 -06:00
spi-mpc512x-psc.c
spi-nuc900.c
spi-oc-tiny.c
spi-omap2-mcspi.c	SPI: fix over-eager devm_xxx() conversion	2012-06-18 11:27:04 +01:00
spi-omap-100k.c
spi-omap-uwire.c
spi-orion.c
spi-pl022.c
spi-ppc4xx.c	spi: By default setup spi_masters with 1 chipselect and dynamics bus number	2012-05-19 23:42:08 -06:00
spi-pxa2xx-pci.c
spi-pxa2xx.c
spi-rspi.c	spi/rspi: add dmaengine support	2012-05-19 22:37:16 -06:00
spi-s3c24xx-fiq.h
spi-s3c24xx-fiq.S
spi-s3c24xx.c
spi-s3c64xx.c
spi-sh-hspi.c
spi-sh-msiof.c
spi-sh-sci.c
spi-sh.c
spi-sirf.c	SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errors	2012-05-19 23:17:31 -06:00
spi-stmp.c
spi-tegra.c
spi-ti-ssp.c
spi-tle62x0.c
spi-topcliff-pch.c	spi: By default setup spi_masters with 1 chipselect and dynamics bus number	2012-05-19 23:42:08 -06:00
spi-txx9.c
spi-xilinx.c
spi.c	spi: By default setup spi_masters with 1 chipselect and dynamics bus number	2012-05-19 23:42:08 -06:00
spidev.c