linux/include/asm-arm/arch-omap/gpio.h
Tony Lindgren 9839c6b8dd [ARM] 2888/1: OMAP 3/4: Update omap include files, take 2
Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Start adding 24xx support by Paul Mundt
- Clean-up of cpu detection by Dirk Behme and Tony Lindgren
- Add DSP header by Toshihiro Kobayashi
- Add support for mtd-xip by Vladimir Barinov
- Add various new mux registers
- Move OMAP specific serial defines back to serial.h

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 17:20:27 +01:00

80 lines
2.6 KiB
C

/*
* linux/include/asm-arm/arch-omap/gpio.h
*
* OMAP GPIO handling defines and functions
*
* Copyright (C) 2003-2005 Nokia Corporation
*
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
#include <asm/arch/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/io.h>
#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000
#ifdef CONFIG_ARCH_OMAP730
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x02
#define OMAP_MPUIO_IO_CNTL 0x04
#define OMAP_MPUIO_KBR_LATCH 0x08
#define OMAP_MPUIO_KBC 0x0a
#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c
#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e
#define OMAP_MPUIO_KBD_INT 0x10
#define OMAP_MPUIO_GPIO_INT 0x12
#define OMAP_MPUIO_KBD_MASKIT 0x14
#define OMAP_MPUIO_GPIO_MASKIT 0x16
#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18
#define OMAP_MPUIO_LATCH 0x1a
#else
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x04
#define OMAP_MPUIO_IO_CNTL 0x08
#define OMAP_MPUIO_KBR_LATCH 0x10
#define OMAP_MPUIO_KBC 0x14
#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
#define OMAP_MPUIO_KBD_INT 0x20
#define OMAP_MPUIO_GPIO_INT 0x24
#define OMAP_MPUIO_KBD_MASKIT 0x28
#define OMAP_MPUIO_GPIO_MASKIT 0x2c
#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
#define OMAP_MPUIO_LATCH 0x34
#endif
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \
IH_MPUIO_BASE + ((nr) & 0x0f) : \
IH_GPIO_BASE + ((nr) & 0x3f))
extern int omap_gpio_init(void); /* Call from board init only */
extern int omap_request_gpio(int gpio);
extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
#endif