linux/net/openvswitch
Lance Richardson 75f01a4c9c openvswitch: maintain correct checksum state in conntrack actions
When executing conntrack actions on skbuffs with checksum mode
CHECKSUM_COMPLETE, the checksum must be updated to account for
header pushes and pulls. Otherwise we get "hw csum failure"
logs similar to this (ICMP packet received on geneve tunnel
via ixgbe NIC):

[  405.740065] genev_sys_6081: hw csum failure
[  405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G          I     4.10.0-rc3+ #1
[  405.740108] Call Trace:
[  405.740110]  <IRQ>
[  405.740113]  dump_stack+0x63/0x87
[  405.740116]  netdev_rx_csum_fault+0x3a/0x40
[  405.740118]  __skb_checksum_complete+0xcf/0xe0
[  405.740120]  nf_ip_checksum+0xc8/0xf0
[  405.740124]  icmp_error+0x1de/0x351 [nf_conntrack_ipv4]
[  405.740132]  nf_conntrack_in+0xe1/0x550 [nf_conntrack]
[  405.740137]  ? find_bucket.isra.2+0x62/0x70 [openvswitch]
[  405.740143]  __ovs_ct_lookup+0x95/0x980 [openvswitch]
[  405.740145]  ? netif_rx_internal+0x44/0x110
[  405.740149]  ovs_ct_execute+0x147/0x4b0 [openvswitch]
[  405.740153]  do_execute_actions+0x22e/0xa70 [openvswitch]
[  405.740157]  ovs_execute_actions+0x40/0x120 [openvswitch]
[  405.740161]  ovs_dp_process_packet+0x84/0x120 [openvswitch]
[  405.740166]  ovs_vport_receive+0x73/0xd0 [openvswitch]
[  405.740168]  ? udp_rcv+0x1a/0x20
[  405.740170]  ? ip_local_deliver_finish+0x93/0x1e0
[  405.740172]  ? ip_local_deliver+0x6f/0xe0
[  405.740174]  ? ip_rcv_finish+0x3a0/0x3a0
[  405.740176]  ? ip_rcv_finish+0xdb/0x3a0
[  405.740177]  ? ip_rcv+0x2a7/0x400
[  405.740180]  ? __netif_receive_skb_core+0x970/0xa00
[  405.740185]  netdev_frame_hook+0xd3/0x160 [openvswitch]
[  405.740187]  __netif_receive_skb_core+0x1dc/0xa00
[  405.740194]  ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe]
[  405.740197]  __netif_receive_skb+0x18/0x60
[  405.740199]  netif_receive_skb_internal+0x40/0xb0
[  405.740201]  napi_gro_receive+0xcd/0x120
[  405.740204]  gro_cell_poll+0x57/0x80 [geneve]
[  405.740206]  net_rx_action+0x260/0x3c0
[  405.740209]  __do_softirq+0xc9/0x28c
[  405.740211]  irq_exit+0xd9/0xf0
[  405.740213]  do_IRQ+0x51/0xd0
[  405.740215]  common_interrupt+0x93/0x93

Fixes: 7f8a436eaa ("openvswitch: Add conntrack action")
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-15 22:15:16 -05:00
..
actions.c openvswitch: add Ethernet push and pop actions 2016-11-13 00:51:02 -05:00
conntrack.c openvswitch: maintain correct checksum state in conntrack actions 2017-01-15 22:15:16 -05:00
conntrack.h
datapath.c openvswitch: upcall: Fix vlan handling. 2016-12-27 12:28:07 -05:00
datapath.h netns: make struct pernet_operations::id unsigned int 2016-11-18 10:59:15 -05:00
dp_notify.c
flow_netlink.c openvswitch: Add a missing break statement. 2016-12-20 14:07:41 -05:00
flow_netlink.h
flow_table.c
flow_table.h
flow.c openvswitch: upcall: Fix vlan handling. 2016-12-27 12:28:07 -05:00
flow.h openvswitch: add mac_proto field to the flow key 2016-11-13 00:51:02 -05:00
Kconfig
Makefile
vport-geneve.c
vport-gre.c
vport-internal_dev.c net: use core MTU range checking in core net infra 2016-10-20 14:51:09 -04:00
vport-internal_dev.h
vport-netdev.c openvswitch: allow L3 netdev ports 2016-11-13 00:51:02 -05:00
vport-netdev.h
vport-vxlan.c
vport.c openvswitch: add processing of L3 packets 2016-11-13 00:51:02 -05:00
vport.h openvswitch: pass mac_proto to ovs_vport_send 2016-11-13 00:51:02 -05:00