mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 09:56:00 +00:00
dbdc025bb2
The IIO DAC drivers are in a reasonably good shape. They all make use of channel spec and non of them provides non-documented sysfs attributes. Code style should be OK as well, both checkpatch and coccicheck only report trivial issues. So lets move the whole folder out of staging. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
419 lines
9.7 KiB
C
419 lines
9.7 KiB
C
/*
|
|
* AD5686R, AD5685R, AD5684R Digital to analog converters driver
|
|
*
|
|
* Copyright 2011 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define AD5686_DAC_CHANNELS 4
|
|
|
|
#define AD5686_ADDR(x) ((x) << 16)
|
|
#define AD5686_CMD(x) ((x) << 20)
|
|
|
|
#define AD5686_ADDR_DAC(chan) (0x1 << (chan))
|
|
#define AD5686_ADDR_ALL_DAC 0xF
|
|
|
|
#define AD5686_CMD_NOOP 0x0
|
|
#define AD5686_CMD_WRITE_INPUT_N 0x1
|
|
#define AD5686_CMD_UPDATE_DAC_N 0x2
|
|
#define AD5686_CMD_WRITE_INPUT_N_UPDATE_N 0x3
|
|
#define AD5686_CMD_POWERDOWN_DAC 0x4
|
|
#define AD5686_CMD_LDAC_MASK 0x5
|
|
#define AD5686_CMD_RESET 0x6
|
|
#define AD5686_CMD_INTERNAL_REFER_SETUP 0x7
|
|
#define AD5686_CMD_DAISY_CHAIN_ENABLE 0x8
|
|
#define AD5686_CMD_READBACK_ENABLE 0x9
|
|
|
|
#define AD5686_LDAC_PWRDN_NONE 0x0
|
|
#define AD5686_LDAC_PWRDN_1K 0x1
|
|
#define AD5686_LDAC_PWRDN_100K 0x2
|
|
#define AD5686_LDAC_PWRDN_3STATE 0x3
|
|
|
|
/**
|
|
* struct ad5686_chip_info - chip specific information
|
|
* @int_vref_mv: AD5620/40/60: the internal reference voltage
|
|
* @channel: channel specification
|
|
*/
|
|
|
|
struct ad5686_chip_info {
|
|
u16 int_vref_mv;
|
|
struct iio_chan_spec channel[AD5686_DAC_CHANNELS];
|
|
};
|
|
|
|
/**
|
|
* struct ad5446_state - driver instance specific data
|
|
* @spi: spi_device
|
|
* @chip_info: chip model specific constants, available modes etc
|
|
* @reg: supply regulator
|
|
* @vref_mv: actual reference voltage used
|
|
* @pwr_down_mask: power down mask
|
|
* @pwr_down_mode: current power down mode
|
|
* @data: spi transfer buffers
|
|
*/
|
|
|
|
struct ad5686_state {
|
|
struct spi_device *spi;
|
|
const struct ad5686_chip_info *chip_info;
|
|
struct regulator *reg;
|
|
unsigned short vref_mv;
|
|
unsigned pwr_down_mask;
|
|
unsigned pwr_down_mode;
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
|
|
union {
|
|
u32 d32;
|
|
u8 d8[4];
|
|
} data[3] ____cacheline_aligned;
|
|
};
|
|
|
|
/**
|
|
* ad5686_supported_device_ids:
|
|
*/
|
|
|
|
enum ad5686_supported_device_ids {
|
|
ID_AD5684,
|
|
ID_AD5685,
|
|
ID_AD5686,
|
|
};
|
|
static int ad5686_spi_write(struct ad5686_state *st,
|
|
u8 cmd, u8 addr, u16 val, u8 shift)
|
|
{
|
|
val <<= shift;
|
|
|
|
st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
|
|
AD5686_ADDR(addr) |
|
|
val);
|
|
|
|
return spi_write(st->spi, &st->data[0].d8[1], 3);
|
|
}
|
|
|
|
static int ad5686_spi_read(struct ad5686_state *st, u8 addr)
|
|
{
|
|
struct spi_transfer t[] = {
|
|
{
|
|
.tx_buf = &st->data[0].d8[1],
|
|
.len = 3,
|
|
.cs_change = 1,
|
|
}, {
|
|
.tx_buf = &st->data[1].d8[1],
|
|
.rx_buf = &st->data[2].d8[1],
|
|
.len = 3,
|
|
},
|
|
};
|
|
struct spi_message m;
|
|
int ret;
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t[0], &m);
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_READBACK_ENABLE) |
|
|
AD5686_ADDR(addr));
|
|
st->data[1].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP));
|
|
|
|
ret = spi_sync(st->spi, &m);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return be32_to_cpu(st->data[2].d32);
|
|
}
|
|
|
|
static const char * const ad5686_powerdown_modes[] = {
|
|
"1kohm_to_gnd",
|
|
"100kohm_to_gnd",
|
|
"three_state"
|
|
};
|
|
|
|
static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct ad5686_state *st = iio_priv(indio_dev);
|
|
|
|
return ((st->pwr_down_mode >> (chan->channel * 2)) & 0x3) - 1;
|
|
}
|
|
|
|
static int ad5686_set_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, unsigned int mode)
|
|
{
|
|
struct ad5686_state *st = iio_priv(indio_dev);
|
|
|
|
st->pwr_down_mode &= ~(0x3 << (chan->channel * 2));
|
|
st->pwr_down_mode |= ((mode + 1) << (chan->channel * 2));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_enum ad5686_powerdown_mode_enum = {
|
|
.items = ad5686_powerdown_modes,
|
|
.num_items = ARRAY_SIZE(ad5686_powerdown_modes),
|
|
.get = ad5686_get_powerdown_mode,
|
|
.set = ad5686_set_powerdown_mode,
|
|
};
|
|
|
|
static ssize_t ad5686_read_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private, const struct iio_chan_spec *chan, char *buf)
|
|
{
|
|
struct ad5686_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n", !!(st->pwr_down_mask &
|
|
(0x3 << (chan->channel * 2))));
|
|
}
|
|
|
|
static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
|
|
size_t len)
|
|
{
|
|
bool readin;
|
|
int ret;
|
|
struct ad5686_state *st = iio_priv(indio_dev);
|
|
|
|
ret = strtobool(buf, &readin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (readin == true)
|
|
st->pwr_down_mask |= (0x3 << (chan->channel * 2));
|
|
else
|
|
st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
|
|
|
|
ret = ad5686_spi_write(st, AD5686_CMD_POWERDOWN_DAC, 0,
|
|
st->pwr_down_mask & st->pwr_down_mode, 0);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static int ad5686_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct ad5686_state *st = iio_priv(indio_dev);
|
|
unsigned long scale_uv;
|
|
int ret;
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = ad5686_spi_read(st, chan->address);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
scale_uv = (st->vref_mv * 100000)
|
|
>> (chan->scan_type.realbits);
|
|
*val = scale_uv / 100000;
|
|
*val2 = (scale_uv % 100000) * 10;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ad5686_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct ad5686_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (val > (1 << chan->scan_type.realbits) || val < 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = ad5686_spi_write(st,
|
|
AD5686_CMD_WRITE_INPUT_N_UPDATE_N,
|
|
chan->address,
|
|
val,
|
|
chan->scan_type.shift);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info ad5686_info = {
|
|
.read_raw = ad5686_read_raw,
|
|
.write_raw = ad5686_write_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static const struct iio_chan_spec_ext_info ad5686_ext_info[] = {
|
|
{
|
|
.name = "powerdown",
|
|
.read = ad5686_read_dac_powerdown,
|
|
.write = ad5686_write_dac_powerdown,
|
|
},
|
|
IIO_ENUM("powerdown_mode", false, &ad5686_powerdown_mode_enum),
|
|
IIO_ENUM_AVAILABLE("powerdown_mode", &ad5686_powerdown_mode_enum),
|
|
{ },
|
|
};
|
|
|
|
#define AD5868_CHANNEL(chan, bits, shift) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.output = 1, \
|
|
.channel = chan, \
|
|
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
|
|
IIO_CHAN_INFO_SCALE_SHARED_BIT, \
|
|
.address = AD5686_ADDR_DAC(chan), \
|
|
.scan_type = IIO_ST('u', bits, 16, shift), \
|
|
.ext_info = ad5686_ext_info, \
|
|
}
|
|
|
|
static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
|
|
[ID_AD5684] = {
|
|
.channel[0] = AD5868_CHANNEL(0, 12, 4),
|
|
.channel[1] = AD5868_CHANNEL(1, 12, 4),
|
|
.channel[2] = AD5868_CHANNEL(2, 12, 4),
|
|
.channel[3] = AD5868_CHANNEL(3, 12, 4),
|
|
.int_vref_mv = 2500,
|
|
},
|
|
[ID_AD5685] = {
|
|
.channel[0] = AD5868_CHANNEL(0, 14, 2),
|
|
.channel[1] = AD5868_CHANNEL(1, 14, 2),
|
|
.channel[2] = AD5868_CHANNEL(2, 14, 2),
|
|
.channel[3] = AD5868_CHANNEL(3, 14, 2),
|
|
.int_vref_mv = 2500,
|
|
},
|
|
[ID_AD5686] = {
|
|
.channel[0] = AD5868_CHANNEL(0, 16, 0),
|
|
.channel[1] = AD5868_CHANNEL(1, 16, 0),
|
|
.channel[2] = AD5868_CHANNEL(2, 16, 0),
|
|
.channel[3] = AD5868_CHANNEL(3, 16, 0),
|
|
.int_vref_mv = 2500,
|
|
},
|
|
};
|
|
|
|
|
|
static int __devinit ad5686_probe(struct spi_device *spi)
|
|
{
|
|
struct ad5686_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int ret, regdone = 0, voltage_uv = 0;
|
|
|
|
indio_dev = iio_device_alloc(sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
st->reg = regulator_get(&spi->dev, "vcc");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
goto error_put_reg;
|
|
|
|
voltage_uv = regulator_get_voltage(st->reg);
|
|
}
|
|
|
|
st->chip_info =
|
|
&ad5686_chip_info_tbl[spi_get_device_id(spi)->driver_data];
|
|
|
|
if (voltage_uv)
|
|
st->vref_mv = voltage_uv / 1000;
|
|
else
|
|
st->vref_mv = st->chip_info->int_vref_mv;
|
|
|
|
st->spi = spi;
|
|
|
|
/* Set all the power down mode for all channels to 1K pulldown */
|
|
st->pwr_down_mode = 0x55;
|
|
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->info = &ad5686_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = st->chip_info->channel;
|
|
indio_dev->num_channels = AD5686_DAC_CHANNELS;
|
|
|
|
regdone = 1;
|
|
ret = ad5686_spi_write(st, AD5686_CMD_INTERNAL_REFER_SETUP, 0,
|
|
!!voltage_uv, 0);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
return 0;
|
|
|
|
error_disable_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
error_put_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_put(st->reg);
|
|
|
|
iio_device_free(indio_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit ad5686_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad5686_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (!IS_ERR(st->reg)) {
|
|
regulator_disable(st->reg);
|
|
regulator_put(st->reg);
|
|
}
|
|
iio_device_free(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ad5686_id[] = {
|
|
{"ad5684", ID_AD5684},
|
|
{"ad5685", ID_AD5685},
|
|
{"ad5686", ID_AD5686},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad5686_id);
|
|
|
|
static struct spi_driver ad5686_driver = {
|
|
.driver = {
|
|
.name = "ad5686",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = ad5686_probe,
|
|
.remove = __devexit_p(ad5686_remove),
|
|
.id_table = ad5686_id,
|
|
};
|
|
module_spi_driver(ad5686_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
|
|
MODULE_DESCRIPTION("Analog Devices AD5686/85/84 DAC");
|
|
MODULE_LICENSE("GPL v2");
|