mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 09:22:37 +00:00
7f7fda04a6
The bit position in the status register corresponding to the PCI DMA interrupt was incorrect. Additionally, we did not have a define for the PCI DMA interrupt. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
178 lines
4.2 KiB
C
178 lines
4.2 KiB
C
/* The CPM2 internal interrupt controller. It is usually
|
|
* the only interrupt controller.
|
|
* There are two 32-bit registers (high/low) for up to 64
|
|
* possible interrupts.
|
|
*
|
|
* Now, the fun starts.....Interrupt Numbers DO NOT MAP
|
|
* in a simple arithmetic fashion to mask or pending registers.
|
|
* That is, interrupt 4 does not map to bit position 4.
|
|
* We create two tables, indexed by vector number, to indicate
|
|
* which register to use and which bit in the register to use.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/init.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/immap_cpm2.h>
|
|
#include <asm/mpc8260.h>
|
|
|
|
#include "cpm2_pic.h"
|
|
|
|
static u_char irq_to_siureg[] = {
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0
|
|
};
|
|
|
|
/* bit numbers do not match the docs, these are precomputed so the bit for
|
|
* a given irq is (1 << irq_to_siubit[irq]) */
|
|
static u_char irq_to_siubit[] = {
|
|
0, 15, 14, 13, 12, 11, 10, 9,
|
|
8, 7, 6, 5, 4, 3, 2, 1,
|
|
2, 1, 0, 14, 13, 12, 11, 10,
|
|
9, 8, 7, 6, 5, 4, 3, 0,
|
|
31, 30, 29, 28, 27, 26, 25, 24,
|
|
23, 22, 21, 20, 19, 18, 17, 16,
|
|
16, 17, 18, 19, 20, 21, 22, 23,
|
|
24, 25, 26, 27, 28, 29, 30, 31,
|
|
};
|
|
|
|
static void cpm2_mask_irq(unsigned int irq_nr)
|
|
{
|
|
int bit, word;
|
|
volatile uint *simr;
|
|
|
|
irq_nr -= CPM_IRQ_OFFSET;
|
|
|
|
bit = irq_to_siubit[irq_nr];
|
|
word = irq_to_siureg[irq_nr];
|
|
|
|
simr = &(cpm2_immr->im_intctl.ic_simrh);
|
|
ppc_cached_irq_mask[word] &= ~(1 << bit);
|
|
simr[word] = ppc_cached_irq_mask[word];
|
|
}
|
|
|
|
static void cpm2_unmask_irq(unsigned int irq_nr)
|
|
{
|
|
int bit, word;
|
|
volatile uint *simr;
|
|
|
|
irq_nr -= CPM_IRQ_OFFSET;
|
|
|
|
bit = irq_to_siubit[irq_nr];
|
|
word = irq_to_siureg[irq_nr];
|
|
|
|
simr = &(cpm2_immr->im_intctl.ic_simrh);
|
|
ppc_cached_irq_mask[word] |= 1 << bit;
|
|
simr[word] = ppc_cached_irq_mask[word];
|
|
}
|
|
|
|
static void cpm2_mask_and_ack(unsigned int irq_nr)
|
|
{
|
|
int bit, word;
|
|
volatile uint *simr, *sipnr;
|
|
|
|
irq_nr -= CPM_IRQ_OFFSET;
|
|
|
|
bit = irq_to_siubit[irq_nr];
|
|
word = irq_to_siureg[irq_nr];
|
|
|
|
simr = &(cpm2_immr->im_intctl.ic_simrh);
|
|
sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
|
|
ppc_cached_irq_mask[word] &= ~(1 << bit);
|
|
simr[word] = ppc_cached_irq_mask[word];
|
|
sipnr[word] = 1 << bit;
|
|
}
|
|
|
|
static void cpm2_end_irq(unsigned int irq_nr)
|
|
{
|
|
int bit, word;
|
|
volatile uint *simr;
|
|
|
|
if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
|
|
&& irq_desc[irq_nr].action) {
|
|
|
|
irq_nr -= CPM_IRQ_OFFSET;
|
|
bit = irq_to_siubit[irq_nr];
|
|
word = irq_to_siureg[irq_nr];
|
|
|
|
simr = &(cpm2_immr->im_intctl.ic_simrh);
|
|
ppc_cached_irq_mask[word] |= 1 << bit;
|
|
simr[word] = ppc_cached_irq_mask[word];
|
|
/*
|
|
* Work around large numbers of spurious IRQs on PowerPC 82xx
|
|
* systems.
|
|
*/
|
|
mb();
|
|
}
|
|
}
|
|
|
|
static struct hw_interrupt_type cpm2_pic = {
|
|
.typename = " CPM2 SIU ",
|
|
.enable = cpm2_unmask_irq,
|
|
.disable = cpm2_mask_irq,
|
|
.ack = cpm2_mask_and_ack,
|
|
.end = cpm2_end_irq,
|
|
};
|
|
|
|
int cpm2_get_irq(struct pt_regs *regs)
|
|
{
|
|
int irq;
|
|
unsigned long bits;
|
|
|
|
/* For CPM2, read the SIVEC register and shift the bits down
|
|
* to get the irq number. */
|
|
bits = cpm2_immr->im_intctl.ic_sivec;
|
|
irq = bits >> 26;
|
|
|
|
if (irq == 0)
|
|
return(-1);
|
|
return irq+CPM_IRQ_OFFSET;
|
|
}
|
|
|
|
void cpm2_init_IRQ(void)
|
|
{
|
|
int i;
|
|
|
|
/* Clear the CPM IRQ controller, in case it has any bits set
|
|
* from the bootloader
|
|
*/
|
|
|
|
/* Mask out everything */
|
|
cpm2_immr->im_intctl.ic_simrh = 0x00000000;
|
|
cpm2_immr->im_intctl.ic_simrl = 0x00000000;
|
|
wmb();
|
|
|
|
/* Ack everything */
|
|
cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
|
|
cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
|
|
wmb();
|
|
|
|
/* Dummy read of the vector */
|
|
i = cpm2_immr->im_intctl.ic_sivec;
|
|
rmb();
|
|
|
|
/* Initialize the default interrupt mapping priorities,
|
|
* in case the boot rom changed something on us.
|
|
*/
|
|
cpm2_immr->im_intctl.ic_sicr = 0;
|
|
cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
|
|
cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
|
|
|
|
|
|
/* Enable chaining to OpenPIC, and make everything level
|
|
*/
|
|
for (i = 0; i < NR_CPM_INTS; i++) {
|
|
irq_desc[i+CPM_IRQ_OFFSET].handler = &cpm2_pic;
|
|
irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL;
|
|
}
|
|
}
|