mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 02:48:21 +00:00
8600b697cd
Pull i2c updates from Wolfram Sang: - the first series of making i2c_device_id optional instead of mandatory (in favor of alternatives like of_device_id). This involves adding a new probe callback (probe_new) which removes some peculiarities I2C had for a long time now. The new probe is matching the other subsystems now and the old one will be removed once all users are converted. It is expected to take a while but there is ongoing interest in that. - SMBus Host Notify introduced 4.9 got refactored. They are now using interrupts instead of the alert callback which solves multiple issues. - new drivers for iMX LowPower I2C, Mellanox CPLD and its I2C mux - significant refactoring for bcm2835 driver - the usual set of driver updates and improvements * 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits) i2c: fsl-lpi2c: read lpi2c fifo size in probe() i2c: octeon: thunderx: Remove double-check after interrupt i2c: octeon: thunderx: TWSI software reset in recovery i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs i2c: sh_mobile: Add per-Generation fallback bindings i2c: rcar: Add per-Generation fallback bindings i2c: imx-lpi2c: add low power i2c bus driver dt-bindings: i2c: imx-lpi2c: add devicetree bindings i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield i2c: pxa: Add support for the I2C units found in Armada 3700 i2c: pxa: Add definition of fast and high speed modes via the regs layout dt-bindings: i2c: pxa: Update the documentation for the Armada 3700 i2c: qup: support SMBus block read i2c: qup: add ACPI support i2c: designware: Consolidate default functionality bits i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep i2c: mux: pca954x: Add ACPI support for pca954x i2c: use an IRQ to report Host Notify events, not alert i2c: i801: remove SMBNTFDDAT reads as they always seem to return 0 i2c: i801: use the BIT() macro for FEATURES_* also ...
97 lines
3.1 KiB
Plaintext
97 lines
3.1 KiB
Plaintext
#
|
|
# Multiplexer I2C chip drivers configuration
|
|
#
|
|
|
|
menu "Multiplexer I2C Chip support"
|
|
depends on I2C_MUX
|
|
|
|
config I2C_ARB_GPIO_CHALLENGE
|
|
tristate "GPIO-based I2C arbitration"
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
depends on OF
|
|
help
|
|
If you say yes to this option, support will be included for an
|
|
I2C multimaster arbitration scheme using GPIOs and a challenge &
|
|
response mechanism where masters have to claim the bus by asserting
|
|
a GPIO.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-arb-gpio-challenge.
|
|
|
|
config I2C_MUX_GPIO
|
|
tristate "GPIO-based I2C multiplexer"
|
|
depends on GPIOLIB
|
|
help
|
|
If you say yes to this option, support will be included for a
|
|
GPIO based I2C multiplexer. This driver provides access to
|
|
I2C busses connected through a MUX, which is controlled
|
|
through GPIO pins.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mux-gpio.
|
|
|
|
config I2C_MUX_PCA9541
|
|
tristate "NXP PCA9541 I2C Master Selector"
|
|
help
|
|
If you say yes here you get support for the NXP PCA9541
|
|
I2C Master Selector.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mux-pca9541.
|
|
|
|
config I2C_MUX_PCA954x
|
|
tristate "Philips PCA954x I2C Mux/switches"
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for the Philips PCA954x
|
|
I2C mux/switch devices.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mux-pca954x.
|
|
|
|
config I2C_MUX_PINCTRL
|
|
tristate "pinctrl-based I2C multiplexer"
|
|
depends on PINCTRL
|
|
help
|
|
If you say yes to this option, support will be included for an I2C
|
|
multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
|
|
This is useful for SoCs whose I2C module's signals can be routed to
|
|
different sets of pins at run-time.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called pinctrl-i2cmux.
|
|
|
|
config I2C_MUX_REG
|
|
tristate "Register-based I2C multiplexer"
|
|
depends on HAS_IOMEM
|
|
help
|
|
If you say yes to this option, support will be included for a
|
|
register based I2C multiplexer. This driver provides access to
|
|
I2C busses connected through a MUX, which is controlled
|
|
by a single register.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mux-reg.
|
|
|
|
config I2C_DEMUX_PINCTRL
|
|
tristate "pinctrl-based I2C demultiplexer"
|
|
depends on PINCTRL && OF
|
|
select OF_DYNAMIC
|
|
help
|
|
If you say yes to this option, support will be included for an I2C
|
|
demultiplexer that uses the pinctrl subsystem. This is useful if you
|
|
want to change the I2C master at run-time depending on features.
|
|
|
|
config I2C_MUX_MLXCPLD
|
|
tristate "Mellanox CPLD based I2C multiplexer"
|
|
help
|
|
If you say yes to this option, support will be included for a
|
|
CPLD based I2C multiplexer. This driver provides access to
|
|
I2C busses connected through a MUX, which is controlled
|
|
by a CPLD register.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mux-mlxcpld.
|
|
|
|
endmenu
|