mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-20 16:30:53 +00:00
f94edacf99
This moves the bit that indicates whether a thread has ownership of the FPU from the TS_USEDFPU bit in thread_info->status to a word of its own (called 'has_fpu') in task_struct->thread.has_fpu. This fixes two independent bugs at the same time: - changing 'thread_info->status' from the scheduler causes nasty problems for the other users of that variable, since it is defined to be thread-synchronous (that's what the "TS_" part of the naming was supposed to indicate). So perfectly valid code could (and did) do ti->status |= TS_RESTORE_SIGMASK; and the compiler was free to do that as separate load, or and store instructions. Which can cause problems with preemption, since a task switch could happen in between, and change the TS_USEDFPU bit. The change to TS_USEDFPU would be overwritten by the final store. In practice, this seldom happened, though, because the 'status' field was seldom used more than once, so gcc would generally tend to generate code that used a read-modify-write instruction and thus happened to avoid this problem - RMW instructions are naturally low fat and preemption-safe. - On x86-32, the current_thread_info() pointer would, during interrupts and softirqs, point to a *copy* of the real thread_info, because x86-32 uses %esp to calculate the thread_info address, and thus the separate irq (and softirq) stacks would cause these kinds of odd thread_info copy aliases. This is normally not a problem, since interrupts aren't supposed to look at thread information anyway (what thread is running at interrupt time really isn't very well-defined), but it confused the heck out of irq_fpu_usable() and the code that tried to squirrel away the FPU state. (It also caused untold confusion for us poor kernel developers). It also turns out that using 'task_struct' is actually much more natural for most of the call sites that care about the FPU state, since they tend to work with the task struct for other reasons anyway (ie scheduling). And the FPU data that we are going to save/restore is found there too. Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to the %esp issue. Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: Raphael Prevost <raphael@buro.asia> Acked-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
274 lines
8.4 KiB
C
274 lines
8.4 KiB
C
/* thread_info.h: low-level thread information
|
|
*
|
|
* Copyright (C) 2002 David Howells (dhowells@redhat.com)
|
|
* - Incorporating suggestions made by Linus Torvalds and Dave Miller
|
|
*/
|
|
|
|
#ifndef _ASM_X86_THREAD_INFO_H
|
|
#define _ASM_X86_THREAD_INFO_H
|
|
|
|
#include <linux/compiler.h>
|
|
#include <asm/page.h>
|
|
#include <asm/types.h>
|
|
|
|
/*
|
|
* low level task data that entry.S needs immediate access to
|
|
* - this struct should fit entirely inside of one cache line
|
|
* - this struct shares the supervisor stack pages
|
|
*/
|
|
#ifndef __ASSEMBLY__
|
|
struct task_struct;
|
|
struct exec_domain;
|
|
#include <asm/processor.h>
|
|
#include <asm/ftrace.h>
|
|
#include <linux/atomic.h>
|
|
|
|
struct thread_info {
|
|
struct task_struct *task; /* main task structure */
|
|
struct exec_domain *exec_domain; /* execution domain */
|
|
__u32 flags; /* low level flags */
|
|
__u32 status; /* thread synchronous flags */
|
|
__u32 cpu; /* current CPU */
|
|
int preempt_count; /* 0 => preemptable,
|
|
<0 => BUG */
|
|
mm_segment_t addr_limit;
|
|
struct restart_block restart_block;
|
|
void __user *sysenter_return;
|
|
#ifdef CONFIG_X86_32
|
|
unsigned long previous_esp; /* ESP of the previous stack in
|
|
case of nested (IRQ) stacks
|
|
*/
|
|
__u8 supervisor_stack[0];
|
|
#endif
|
|
unsigned int sig_on_uaccess_error:1;
|
|
unsigned int uaccess_err:1; /* uaccess failed */
|
|
};
|
|
|
|
#define INIT_THREAD_INFO(tsk) \
|
|
{ \
|
|
.task = &tsk, \
|
|
.exec_domain = &default_exec_domain, \
|
|
.flags = 0, \
|
|
.cpu = 0, \
|
|
.preempt_count = INIT_PREEMPT_COUNT, \
|
|
.addr_limit = KERNEL_DS, \
|
|
.restart_block = { \
|
|
.fn = do_no_restart_syscall, \
|
|
}, \
|
|
}
|
|
|
|
#define init_thread_info (init_thread_union.thread_info)
|
|
#define init_stack (init_thread_union.stack)
|
|
|
|
#else /* !__ASSEMBLY__ */
|
|
|
|
#include <asm/asm-offsets.h>
|
|
|
|
#endif
|
|
|
|
/*
|
|
* thread information flags
|
|
* - these are process state flags that various assembly files
|
|
* may need to access
|
|
* - pending work-to-be-done flags are in LSW
|
|
* - other flags in MSW
|
|
* Warning: layout of LSW is hardcoded in entry.S
|
|
*/
|
|
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
|
|
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
|
|
#define TIF_SIGPENDING 2 /* signal pending */
|
|
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
|
|
#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/
|
|
#define TIF_IRET 5 /* force IRET */
|
|
#define TIF_SYSCALL_EMU 6 /* syscall emulation active */
|
|
#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
|
|
#define TIF_SECCOMP 8 /* secure computing */
|
|
#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */
|
|
#define TIF_USER_RETURN_NOTIFY 11 /* notify kernel of userspace return */
|
|
#define TIF_NOTSC 16 /* TSC is not accessible in userland */
|
|
#define TIF_IA32 17 /* 32bit process */
|
|
#define TIF_FORK 18 /* ret_from_fork */
|
|
#define TIF_MEMDIE 20 /* is terminating due to OOM killer */
|
|
#define TIF_DEBUG 21 /* uses debug registers */
|
|
#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
|
|
#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */
|
|
#define TIF_BLOCKSTEP 25 /* set when we want DEBUGCTLMSR_BTF */
|
|
#define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */
|
|
#define TIF_SYSCALL_TRACEPOINT 28 /* syscall tracepoint instrumentation */
|
|
|
|
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
|
|
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
|
|
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
|
|
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
|
|
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
|
|
#define _TIF_IRET (1 << TIF_IRET)
|
|
#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU)
|
|
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
|
|
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
|
|
#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY)
|
|
#define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY)
|
|
#define _TIF_NOTSC (1 << TIF_NOTSC)
|
|
#define _TIF_IA32 (1 << TIF_IA32)
|
|
#define _TIF_FORK (1 << TIF_FORK)
|
|
#define _TIF_DEBUG (1 << TIF_DEBUG)
|
|
#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
|
|
#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
|
|
#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP)
|
|
#define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES)
|
|
#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
|
|
|
|
/* work to do in syscall_trace_enter() */
|
|
#define _TIF_WORK_SYSCALL_ENTRY \
|
|
(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT | \
|
|
_TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT)
|
|
|
|
/* work to do in syscall_trace_leave() */
|
|
#define _TIF_WORK_SYSCALL_EXIT \
|
|
(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP | \
|
|
_TIF_SYSCALL_TRACEPOINT)
|
|
|
|
/* work to do on interrupt/exception return */
|
|
#define _TIF_WORK_MASK \
|
|
(0x0000FFFF & \
|
|
~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT| \
|
|
_TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
|
|
|
|
/* work to do on any return to user space */
|
|
#define _TIF_ALLWORK_MASK \
|
|
((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT)
|
|
|
|
/* Only used for 64 bit */
|
|
#define _TIF_DO_NOTIFY_MASK \
|
|
(_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME | \
|
|
_TIF_USER_RETURN_NOTIFY)
|
|
|
|
/* flags to check in __switch_to() */
|
|
#define _TIF_WORK_CTXSW \
|
|
(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)
|
|
|
|
#define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
|
|
#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
|
|
|
|
#define PREEMPT_ACTIVE 0x10000000
|
|
|
|
/* thread information allocation */
|
|
#ifdef CONFIG_DEBUG_STACK_USAGE
|
|
#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
|
|
#else
|
|
#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK)
|
|
#endif
|
|
|
|
#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
|
|
|
|
#define alloc_thread_info_node(tsk, node) \
|
|
({ \
|
|
struct page *page = alloc_pages_node(node, THREAD_FLAGS, \
|
|
THREAD_ORDER); \
|
|
struct thread_info *ret = page ? page_address(page) : NULL; \
|
|
\
|
|
ret; \
|
|
})
|
|
|
|
#ifdef CONFIG_X86_32
|
|
|
|
#define STACK_WARN (THREAD_SIZE/8)
|
|
/*
|
|
* macros/functions for gaining access to the thread information structure
|
|
*
|
|
* preempt_count needs to be 1 initially, until the scheduler is functional.
|
|
*/
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
/* how to get the current stack pointer from C */
|
|
register unsigned long current_stack_pointer asm("esp") __used;
|
|
|
|
/* how to get the thread information struct from C */
|
|
static inline struct thread_info *current_thread_info(void)
|
|
{
|
|
return (struct thread_info *)
|
|
(current_stack_pointer & ~(THREAD_SIZE - 1));
|
|
}
|
|
|
|
#else /* !__ASSEMBLY__ */
|
|
|
|
/* how to get the thread information struct from ASM */
|
|
#define GET_THREAD_INFO(reg) \
|
|
movl $-THREAD_SIZE, reg; \
|
|
andl %esp, reg
|
|
|
|
/* use this one if reg already contains %esp */
|
|
#define GET_THREAD_INFO_WITH_ESP(reg) \
|
|
andl $-THREAD_SIZE, reg
|
|
|
|
#endif
|
|
|
|
#else /* X86_32 */
|
|
|
|
#include <asm/percpu.h>
|
|
#define KERNEL_STACK_OFFSET (5*8)
|
|
|
|
/*
|
|
* macros/functions for gaining access to the thread information structure
|
|
* preempt_count needs to be 1 initially, until the scheduler is functional.
|
|
*/
|
|
#ifndef __ASSEMBLY__
|
|
DECLARE_PER_CPU(unsigned long, kernel_stack);
|
|
|
|
static inline struct thread_info *current_thread_info(void)
|
|
{
|
|
struct thread_info *ti;
|
|
ti = (void *)(percpu_read_stable(kernel_stack) +
|
|
KERNEL_STACK_OFFSET - THREAD_SIZE);
|
|
return ti;
|
|
}
|
|
|
|
#else /* !__ASSEMBLY__ */
|
|
|
|
/* how to get the thread information struct from ASM */
|
|
#define GET_THREAD_INFO(reg) \
|
|
movq PER_CPU_VAR(kernel_stack),reg ; \
|
|
subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg
|
|
|
|
/*
|
|
* Same if PER_CPU_VAR(kernel_stack) is, perhaps with some offset, already in
|
|
* a certain register (to be used in assembler memory operands).
|
|
*/
|
|
#define THREAD_INFO(reg, off) KERNEL_STACK_OFFSET+(off)-THREAD_SIZE(reg)
|
|
|
|
#endif
|
|
|
|
#endif /* !X86_32 */
|
|
|
|
/*
|
|
* Thread-synchronous status.
|
|
*
|
|
* This is different from the flags in that nobody else
|
|
* ever touches our thread-synchronous status, so we don't
|
|
* have to worry about atomic accesses.
|
|
*/
|
|
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
|
|
#define TS_POLLING 0x0004 /* idle task polling need_resched,
|
|
skip sending interrupt */
|
|
#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
|
|
|
|
#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#define HAVE_SET_RESTORE_SIGMASK 1
|
|
static inline void set_restore_sigmask(void)
|
|
{
|
|
struct thread_info *ti = current_thread_info();
|
|
ti->status |= TS_RESTORE_SIGMASK;
|
|
set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
|
|
}
|
|
#endif /* !__ASSEMBLY__ */
|
|
|
|
#ifndef __ASSEMBLY__
|
|
extern void arch_task_cache_init(void);
|
|
extern void free_thread_info(struct thread_info *ti);
|
|
extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
|
|
#define arch_task_cache_init arch_task_cache_init
|
|
#endif
|
|
#endif /* _ASM_X86_THREAD_INFO_H */
|