Andrew Lunn b750f5b427 net: dsa: Remove redundant phy_attach() ... dsa_slave_phy_setup() finds the phy for the port via device tree and using of_phy_connect(), or it uses the fall back of taking a phy from the switch internal mdio bus and calling phy_connect_direct(). Either way, if a phy is found, phy_attach_direct() is called to attach the phy to the slave device. In dsa_slave_create(), a second call to phy_attach() is made. This results in the warning "PHY already attached". Remove this second, redundant attaching of the phy. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2015-02-09 14:05:42 -08:00
..
dsa_priv.h	net: dsa: allow switch drivers to implement suspend/resume hooks	2014-09-22 14:41:23 -04:00
dsa.c	dsa: correctly determine the number of switches in a system	2015-02-07 22:07:37 -08:00
Kconfig	net: dsa: Add support for reporting switch chip temperatures	2014-10-30 14:54:11 -04:00
Makefile	net: dsa: add Broadcom tag RX/TX handler	2014-08-27 22:59:40 -07:00
slave.c	net: dsa: Remove redundant phy_attach()	2015-02-09 14:05:42 -08:00
tag_brcm.c	dsa: Split ops up, and avoid assigning tag_protocol and receive separately	2014-09-15 17:24:20 -04:00
tag_dsa.c	net: dsa: Don't set skb->protocol on outgoing tagged packets	2014-10-30 14:54:10 -04:00
tag_edsa.c	net: dsa: Don't set skb->protocol on outgoing tagged packets	2014-10-30 14:54:10 -04:00
tag_trailer.c	net: dsa: Don't set skb->protocol on outgoing tagged packets	2014-10-30 14:54:10 -04:00