mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 03:47:43 +00:00
e327f11543
The original version of the driver did not read the SATA calibration fuse to remove the dependency to the fuse driver. The fuse driver is now merged, so add this functionality. The calibration fuse contains a 2-bit value used to pick a set of calibration values for the SATA pad. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
383 lines
10 KiB
C
383 lines
10 KiB
C
/*
|
|
* drivers/ata/ahci_tegra.c
|
|
*
|
|
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* Author:
|
|
* Mikko Perttunen <mperttunen@nvidia.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include <soc/tegra/fuse.h>
|
|
#include <soc/tegra/pmc.h>
|
|
|
|
#include "ahci.h"
|
|
|
|
#define SATA_CONFIGURATION_0 0x180
|
|
#define SATA_CONFIGURATION_EN_FPCI BIT(0)
|
|
|
|
#define SCFG_OFFSET 0x1000
|
|
|
|
#define T_SATA0_CFG_1 0x04
|
|
#define T_SATA0_CFG_1_IO_SPACE BIT(0)
|
|
#define T_SATA0_CFG_1_MEMORY_SPACE BIT(1)
|
|
#define T_SATA0_CFG_1_BUS_MASTER BIT(2)
|
|
#define T_SATA0_CFG_1_SERR BIT(8)
|
|
|
|
#define T_SATA0_CFG_9 0x24
|
|
#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT 13
|
|
|
|
#define SATA_FPCI_BAR5 0x94
|
|
#define SATA_FPCI_BAR5_START_SHIFT 4
|
|
|
|
#define SATA_INTR_MASK 0x188
|
|
#define SATA_INTR_MASK_IP_INT_MASK BIT(16)
|
|
|
|
#define T_SATA0_AHCI_HBA_CAP_BKDR 0x300
|
|
|
|
#define T_SATA0_BKDOOR_CC 0x4a4
|
|
|
|
#define T_SATA0_CFG_SATA 0x54c
|
|
#define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN BIT(12)
|
|
|
|
#define T_SATA0_CFG_MISC 0x550
|
|
|
|
#define T_SATA0_INDEX 0x680
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1 0x690
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK 0xff
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT 0
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK (0xff << 8)
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT 8
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2 0x694
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK 0xff
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_SHIFT 0
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK (0xff << 12)
|
|
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_SHIFT 12
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL2 0x69c
|
|
#define T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1 0x23
|
|
|
|
#define T_SATA0_CHX_PHY_CTRL11 0x6d0
|
|
#define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ (0x2800 << 16)
|
|
|
|
#define FUSE_SATA_CALIB 0x124
|
|
#define FUSE_SATA_CALIB_MASK 0x3
|
|
|
|
struct sata_pad_calibration {
|
|
u8 gen1_tx_amp;
|
|
u8 gen1_tx_peak;
|
|
u8 gen2_tx_amp;
|
|
u8 gen2_tx_peak;
|
|
};
|
|
|
|
static const struct sata_pad_calibration tegra124_pad_calibration[] = {
|
|
{0x18, 0x04, 0x18, 0x0a},
|
|
{0x0e, 0x04, 0x14, 0x0a},
|
|
{0x0e, 0x07, 0x1a, 0x0e},
|
|
{0x14, 0x0e, 0x1a, 0x0e},
|
|
};
|
|
|
|
struct tegra_ahci_priv {
|
|
struct platform_device *pdev;
|
|
void __iomem *sata_regs;
|
|
struct reset_control *sata_rst;
|
|
struct reset_control *sata_oob_rst;
|
|
struct reset_control *sata_cold_rst;
|
|
/* Needs special handling, cannot use ahci_platform */
|
|
struct clk *sata_clk;
|
|
struct regulator_bulk_data supplies[5];
|
|
};
|
|
|
|
static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(tegra->supplies),
|
|
tegra->supplies);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA,
|
|
tegra->sata_clk,
|
|
tegra->sata_rst);
|
|
if (ret)
|
|
goto disable_regulators;
|
|
|
|
reset_control_assert(tegra->sata_oob_rst);
|
|
reset_control_assert(tegra->sata_cold_rst);
|
|
|
|
ret = ahci_platform_enable_resources(hpriv);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
reset_control_deassert(tegra->sata_cold_rst);
|
|
reset_control_deassert(tegra->sata_oob_rst);
|
|
|
|
return 0;
|
|
|
|
disable_power:
|
|
clk_disable_unprepare(tegra->sata_clk);
|
|
|
|
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
|
|
|
|
disable_regulators:
|
|
regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
|
|
ahci_platform_disable_resources(hpriv);
|
|
|
|
reset_control_assert(tegra->sata_rst);
|
|
reset_control_assert(tegra->sata_oob_rst);
|
|
reset_control_assert(tegra->sata_cold_rst);
|
|
|
|
clk_disable_unprepare(tegra->sata_clk);
|
|
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
|
|
}
|
|
|
|
static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
|
int ret;
|
|
unsigned int val;
|
|
struct sata_pad_calibration calib;
|
|
|
|
ret = tegra_ahci_power_on(hpriv);
|
|
if (ret) {
|
|
dev_err(&tegra->pdev->dev,
|
|
"failed to power on AHCI controller: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
|
|
val |= SATA_CONFIGURATION_EN_FPCI;
|
|
writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
|
|
|
|
/* Pad calibration */
|
|
|
|
ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
|
|
if (ret) {
|
|
dev_err(&tegra->pdev->dev,
|
|
"failed to read calibration fuse: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
|
|
|
|
writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
|
|
|
|
val = readl(tegra->sata_regs +
|
|
SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
|
|
val |= calib.gen1_tx_amp <<
|
|
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
|
|
val |= calib.gen1_tx_peak <<
|
|
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET +
|
|
T_SATA0_CHX_PHY_CTRL1_GEN1);
|
|
|
|
val = readl(tegra->sata_regs +
|
|
SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
|
|
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
|
|
val |= calib.gen2_tx_amp <<
|
|
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
|
|
val |= calib.gen2_tx_peak <<
|
|
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET +
|
|
T_SATA0_CHX_PHY_CTRL1_GEN2);
|
|
|
|
writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
|
|
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
|
|
writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
|
|
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
|
|
|
|
writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
|
|
|
|
/* Program controller device ID */
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
|
|
writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
|
|
|
/* Enable IO & memory access, bus master mode */
|
|
|
|
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
|
|
val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
|
|
T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR;
|
|
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
|
|
|
|
/* Program SATA MMIO */
|
|
|
|
writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT,
|
|
tegra->sata_regs + SATA_FPCI_BAR5);
|
|
|
|
writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT,
|
|
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
|
|
|
|
/* Unmask SATA interrupts */
|
|
|
|
val = readl(tegra->sata_regs + SATA_INTR_MASK);
|
|
val |= SATA_INTR_MASK_IP_INT_MASK;
|
|
writel(val, tegra->sata_regs + SATA_INTR_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_ahci_controller_deinit(struct ahci_host_priv *hpriv)
|
|
{
|
|
tegra_ahci_power_off(hpriv);
|
|
}
|
|
|
|
static void tegra_ahci_host_stop(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
|
|
tegra_ahci_controller_deinit(hpriv);
|
|
}
|
|
|
|
static struct ata_port_operations ahci_tegra_port_ops = {
|
|
.inherits = &ahci_ops,
|
|
.host_stop = tegra_ahci_host_stop,
|
|
};
|
|
|
|
static const struct ata_port_info ahci_tegra_port_info = {
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_tegra_port_ops,
|
|
};
|
|
|
|
static const struct of_device_id tegra_ahci_of_match[] = {
|
|
{ .compatible = "nvidia,tegra124-ahci" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
|
|
|
|
static int tegra_ahci_probe(struct platform_device *pdev)
|
|
{
|
|
struct ahci_host_priv *hpriv;
|
|
struct tegra_ahci_priv *tegra;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
hpriv = ahci_platform_get_resources(pdev);
|
|
if (IS_ERR(hpriv))
|
|
return PTR_ERR(hpriv);
|
|
|
|
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
|
|
if (!tegra)
|
|
return -ENOMEM;
|
|
|
|
hpriv->plat_data = tegra;
|
|
|
|
tegra->pdev = pdev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(tegra->sata_regs))
|
|
return PTR_ERR(tegra->sata_regs);
|
|
|
|
tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata");
|
|
if (IS_ERR(tegra->sata_rst)) {
|
|
dev_err(&pdev->dev, "Failed to get sata reset\n");
|
|
return PTR_ERR(tegra->sata_rst);
|
|
}
|
|
|
|
tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev, "sata-oob");
|
|
if (IS_ERR(tegra->sata_oob_rst)) {
|
|
dev_err(&pdev->dev, "Failed to get sata-oob reset\n");
|
|
return PTR_ERR(tegra->sata_oob_rst);
|
|
}
|
|
|
|
tegra->sata_cold_rst = devm_reset_control_get(&pdev->dev, "sata-cold");
|
|
if (IS_ERR(tegra->sata_cold_rst)) {
|
|
dev_err(&pdev->dev, "Failed to get sata-cold reset\n");
|
|
return PTR_ERR(tegra->sata_cold_rst);
|
|
}
|
|
|
|
tegra->sata_clk = devm_clk_get(&pdev->dev, "sata");
|
|
if (IS_ERR(tegra->sata_clk)) {
|
|
dev_err(&pdev->dev, "Failed to get sata clock\n");
|
|
return PTR_ERR(tegra->sata_clk);
|
|
}
|
|
|
|
tegra->supplies[0].supply = "avdd";
|
|
tegra->supplies[1].supply = "hvdd";
|
|
tegra->supplies[2].supply = "vddio";
|
|
tegra->supplies[3].supply = "target-5v";
|
|
tegra->supplies[4].supply = "target-12v";
|
|
|
|
ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(tegra->supplies),
|
|
tegra->supplies);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to get regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = tegra_ahci_controller_init(hpriv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info);
|
|
if (ret)
|
|
goto deinit_controller;
|
|
|
|
return 0;
|
|
|
|
deinit_controller:
|
|
tegra_ahci_controller_deinit(hpriv);
|
|
|
|
return ret;
|
|
};
|
|
|
|
static struct platform_driver tegra_ahci_driver = {
|
|
.probe = tegra_ahci_probe,
|
|
.remove = ata_platform_remove_one,
|
|
.driver = {
|
|
.name = "tegra-ahci",
|
|
.of_match_table = tegra_ahci_of_match,
|
|
},
|
|
/* LP0 suspend support not implemented */
|
|
};
|
|
module_platform_driver(tegra_ahci_driver);
|
|
|
|
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
|
|
MODULE_DESCRIPTION("Tegra124 AHCI SATA driver");
|
|
MODULE_LICENSE("GPL v2");
|