mirror of
https://github.com/FEX-Emu/linux.git
synced 2025-01-25 03:59:29 +00:00
4b562bd2b1
To perform SuperSpeed compliance testing the port should first be placed into compliance mode. For xHCI 1.0 and prior this transition happens automatically when the port is in Training and encounters an LFPS timeout. Thus running compliance tests against a test appliance may simply just work by simply plugging in to the downstream port. However starting with xHCI 1.1 the transition from Polling.LFPS to compliance mode may be disabled by default and needs to be explicitly enabled by writing to the PLS field of the PORTSC register, which sets an internal 'CTE' (Compliance Transition Enabled) flag so that the port will perform the transition the next time it encounters LFPS timeout. Whether this is disabled or not is determined by the 'CTC' (Compliance Transition Capability) bit in the HCCPARAMS2 capability register. In order to allow a test operator to change this if needed, allow a test driver (such as drivers/usb/misc/lvstest.c) to send a SET_FEATURE(PORT_LINK_STATE) control message to the root hub to update the link state prior to connecting to the port. Subsequently, placing the port in warm reset would then disable the flag. Signed-off-by: Jack Pham <jackp@codeaurora.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To understand all the Linux-USB framework, you'll use these resources:
* This source code. This is necessarily an evolving work, and
includes kerneldoc that should help you get a current overview.
("make pdfdocs", and then look at "usb.pdf" for host side and
"gadget.pdf" for peripheral side.) Also, Documentation/usb has
more information.
* The USB 2.0 specification (from www.usb.org), with supplements
such as those for USB OTG and the various device classes.
The USB specification has a good overview chapter, and USB
peripherals conform to the widely known "Chapter 9".
* Chip specifications for USB controllers. Examples include
host controllers (on PCs, servers, and more); peripheral
controllers (in devices with Linux firmware, like printers or
cell phones); and hard-wired peripherals like Ethernet adapters.
* Specifications for other protocols implemented by USB peripheral
functions. Some are vendor-specific; others are vendor-neutral
but just standardized outside of the www.usb.org team.
Here is a list of what each subdirectory here is, and what is contained in
them.
core/ - This is for the core USB host code, including the
usbfs files and the hub class driver ("hub_wq").
host/ - This is for USB host controller drivers. This
includes UHCI, OHCI, EHCI, and others that might
be used with more specialized "embedded" systems.
gadget/ - This is for USB peripheral controller drivers and
the various gadget drivers which talk to them.
Individual USB driver directories. A new driver should be added to the
first subdirectory in the list below that it fits into.
image/ - This is for still image drivers, like scanners or
digital cameras.
../input/ - This is for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
../media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
../net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
into any of the above categories, and work for a range
of USB Class specified devices.
misc/ - This is for all USB device drivers that do not fit
into any of the above categories.