FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-21 00:42:16 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
4c5dabce4e
linux/drivers/regulator/lp3972.c
Mark Brown c172708d38 regulator: core: Use a struct to pass in regulator runtime configuration 
Rather than adding new arguments to regulator_register() every time we
want to add a new bit of dynamic information at runtime change the function
to take these via a struct. By doing this we avoid needing to do further
changes like the recent addition of device tree support which required each
regulator driver to be updated to take an additional parameter.

The regulator_desc which should (mostly) be static data is still passed
separately as most drivers are able to configure this statically at build
time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 12:37:09 +01:00

646 lines
16 KiB
C
Raw Blame History

/*
* Regulator driver for National Semiconductors LP3972 PMIC chip
*
* Based on lp3971.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/lp3972.h>
#include <linux/slab.h>
struct lp3972 {
struct device *dev;
struct mutex io_lock;
struct i2c_client *i2c;
int num_regulators;
struct regulator_dev **rdev;
};
/* LP3972 Control Registers */
#define LP3972_SCR_REG 0x07
#define LP3972_OVER1_REG 0x10
#define LP3972_OVSR1_REG 0x11
#define LP3972_OVER2_REG 0x12
#define LP3972_OVSR2_REG 0x13
#define LP3972_VCC1_REG 0x20
#define LP3972_ADTV1_REG 0x23
#define LP3972_ADTV2_REG 0x24
#define LP3972_AVRC_REG 0x25
#define LP3972_CDTC1_REG 0x26
#define LP3972_CDTC2_REG 0x27
#define LP3972_SDTV1_REG 0x29
#define LP3972_SDTV2_REG 0x2A
#define LP3972_MDTV1_REG 0x32
#define LP3972_MDTV2_REG 0x33
#define LP3972_L2VCR_REG 0x39
#define LP3972_L34VCR_REG 0x3A
#define LP3972_SCR1_REG 0x80
#define LP3972_SCR2_REG 0x81
#define LP3972_OEN3_REG 0x82
#define LP3972_OSR3_REG 0x83
#define LP3972_LOER4_REG 0x84
#define LP3972_B2TV_REG 0x85
#define LP3972_B3TV_REG 0x86
#define LP3972_B32RC_REG 0x87
#define LP3972_ISRA_REG 0x88
#define LP3972_BCCR_REG 0x89
#define LP3972_II1RR_REG 0x8E
#define LP3972_II2RR_REG 0x8F
#define LP3972_SYS_CONTROL1_REG LP3972_SCR1_REG
/* System control register 1 initial value,
* bits 5, 6 and 7 are EPROM programmable */
#define SYS_CONTROL1_INIT_VAL 0x02
#define SYS_CONTROL1_INIT_MASK 0x1F
#define LP3972_VOL_CHANGE_REG LP3972_VCC1_REG
#define LP3972_VOL_CHANGE_FLAG_GO 0x01
#define LP3972_VOL_CHANGE_FLAG_MASK 0x03
/* LDO output enable mask */
#define LP3972_OEN3_L1EN BIT(0)
#define LP3972_OVER2_LDO2_EN BIT(2)
#define LP3972_OVER2_LDO3_EN BIT(3)
#define LP3972_OVER2_LDO4_EN BIT(4)
#define LP3972_OVER1_S_EN BIT(2)
static const int ldo1_voltage_map[] = {
1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
1900, 1925, 1950, 1975, 2000,
};
static const int ldo23_voltage_map[] = {
1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
};
static const int ldo4_voltage_map[] = {
1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
};
static const int ldo5_voltage_map[] = {
0, 0, 0, 0, 0, 850, 875, 900,
925, 950, 975, 1000, 1025, 1050, 1075, 1100,
1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
};
static const int buck1_voltage_map[] = {
725, 750, 775, 800, 825, 850, 875, 900,
925, 950, 975, 1000, 1025, 1050, 1075, 1100,
1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
};
static const int buck23_voltage_map[] = {
0, 800, 850, 900, 950, 1000, 1050, 1100,
1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
3000, 3300,
};
static const int *ldo_voltage_map[] = {
ldo1_voltage_map,
ldo23_voltage_map,
ldo23_voltage_map,
ldo4_voltage_map,
ldo5_voltage_map,
};
static const int *buck_voltage_map[] = {
buck1_voltage_map,
buck23_voltage_map,
buck23_voltage_map,
};
static const int ldo_output_enable_mask[] = {
LP3972_OEN3_L1EN,
LP3972_OVER2_LDO2_EN,
LP3972_OVER2_LDO3_EN,
LP3972_OVER2_LDO4_EN,
LP3972_OVER1_S_EN,
};
static const int ldo_output_enable_addr[] = {
LP3972_OEN3_REG,
LP3972_OVER2_REG,
LP3972_OVER2_REG,
LP3972_OVER2_REG,
LP3972_OVER1_REG,
};
static const int ldo_vol_ctl_addr[] = {
LP3972_MDTV1_REG,
LP3972_L2VCR_REG,
LP3972_L34VCR_REG,
LP3972_L34VCR_REG,
LP3972_SDTV1_REG,
};
static const int buck_vol_enable_addr[] = {
LP3972_OVER1_REG,
LP3972_OEN3_REG,
LP3972_OEN3_REG,
};
static const int buck_base_addr[] = {
LP3972_ADTV1_REG,
LP3972_B2TV_REG,
LP3972_B3TV_REG,
};
#define LP3972_LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[x])
#define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x])
#define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x])
/* LDO voltage control registers shift:
LP3972_LDO1 -> 0, LP3972_LDO2 -> 4
LP3972_LDO3 -> 0, LP3972_LDO4 -> 4
LP3972_LDO5 -> 0
*/
#define LP3972_LDO_VOL_CONTR_SHIFT(x) (((x) & 1) << 2)
#define LP3972_LDO_VOL_CONTR_REG(x) (ldo_vol_ctl_addr[x])
#define LP3972_LDO_VOL_CHANGE_SHIFT(x) ((x) ? 4 : 6)
#define LP3972_LDO_VOL_MASK(x) (((x) % 4) ? 0x0f : 0x1f)
#define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00)
#define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c)
#define LP3972_BUCK_VOL_VALUE_MAP(x) (buck_voltage_map[x])
#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
#define LP3972_BUCK_VOL_MASK 0x1f
#define LP3972_BUCK_VOL_MIN_IDX(x) ((x) ? 0x01 : 0x00)
#define LP3972_BUCK_VOL_MAX_IDX(x) ((x) ? 0x19 : 0x1f)
static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count,
u16 *dest)
{
int ret;
if (count != 1)
return -EIO;
ret = i2c_smbus_read_byte_data(i2c, reg);
if (ret < 0)
return ret;
*dest = ret;
return 0;
}
static int lp3972_i2c_write(struct i2c_client *i2c, char reg, int count,
const u16 *src)
{
if (count != 1)
return -EIO;
return i2c_smbus_write_byte_data(i2c, reg, *src);
}
static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg)
{
u16 val = 0;
mutex_lock(&lp3972->io_lock);
lp3972_i2c_read(lp3972->i2c, reg, 1, &val);
dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
(unsigned)val & 0xff);
mutex_unlock(&lp3972->io_lock);
return val & 0xff;
}
static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
{
u16 tmp;
int ret;
mutex_lock(&lp3972->io_lock);
ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp);
tmp = (tmp & ~mask) | val;
if (ret == 0) {
ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp);
dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
(unsigned)val & 0xff);
}
mutex_unlock(&lp3972->io_lock);
return ret;
}
static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
{
int ldo = rdev_get_id(dev) - LP3972_LDO1;
if (index < LP3972_LDO_VOL_MIN_IDX(ldo) ||
index > LP3972_LDO_VOL_MAX_IDX(ldo))
return -EINVAL;
return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index];
}
static int lp3972_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
u16 val;
val = lp3972_reg_read(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo));
return !!(val & mask);
}
static int lp3972_ldo_enable(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
mask, mask);
}
static int lp3972_ldo_disable(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo);
return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo),
mask, 0);
}
static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
u16 mask = LP3972_LDO_VOL_MASK(ldo);
u16 val, reg;
reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;
return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val];
}
static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
unsigned int selector)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
int shift, ret;
shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo);
ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo),
LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift);
if (ret)
return ret;
/*
* LDO1 and LDO5 support voltage control by either target voltage1
* or target voltage2 register.
* We use target voltage1 register for LDO1 and LDO5 in this driver.
* We need to update voltage change control register(0x20) to enable
* LDO1 and LDO5 to change to their programmed target values.
*/
switch (ldo) {
case LP3972_LDO1:
case LP3972_LDO5:
shift = LP3972_LDO_VOL_CHANGE_SHIFT(ldo);
ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
LP3972_VOL_CHANGE_FLAG_MASK << shift,
LP3972_VOL_CHANGE_FLAG_GO << shift);
if (ret)
return ret;
ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
LP3972_VOL_CHANGE_FLAG_MASK << shift, 0);
break;
}
return ret;
}
static struct regulator_ops lp3972_ldo_ops = {
.list_voltage = lp3972_ldo_list_voltage,
.is_enabled = lp3972_ldo_is_enabled,
.enable = lp3972_ldo_enable,
.disable = lp3972_ldo_disable,
.get_voltage = lp3972_ldo_get_voltage,
.set_voltage_sel = lp3972_ldo_set_voltage_sel,
};
static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
{
int buck = rdev_get_id(dev) - LP3972_DCDC1;
if (index < LP3972_BUCK_VOL_MIN_IDX(buck) ||
index > LP3972_BUCK_VOL_MAX_IDX(buck))
return -EINVAL;
return 1000 * buck_voltage_map[buck][index];
}
static int lp3972_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
u16 mask = 1 << (buck * 2);
u16 val;
val = lp3972_reg_read(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck));
return !!(val & mask);
}
static int lp3972_dcdc_enable(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
u16 mask = 1 << (buck * 2);
u16 val;
val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
mask, mask);
return val;
}
static int lp3972_dcdc_disable(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
u16 mask = 1 << (buck * 2);
u16 val;
val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck),
mask, 0);
return val;
}
static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
u16 reg;
int val;
reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
reg &= LP3972_BUCK_VOL_MASK;
if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck))
val = 1000 * buck_voltage_map[buck][reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value."
" reg = %d\n", reg);
}
return val;
}
static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
unsigned int selector)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
int ret;
ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck),
LP3972_BUCK_VOL_MASK, selector);
if (ret)
return ret;
if (buck != 0)
return ret;
ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
LP3972_VOL_CHANGE_FLAG_MASK, LP3972_VOL_CHANGE_FLAG_GO);
if (ret)
return ret;
return lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG,
LP3972_VOL_CHANGE_FLAG_MASK, 0);
}
static struct regulator_ops lp3972_dcdc_ops = {
.list_voltage = lp3972_dcdc_list_voltage,
.is_enabled = lp3972_dcdc_is_enabled,
.enable = lp3972_dcdc_enable,
.disable = lp3972_dcdc_disable,
.get_voltage = lp3972_dcdc_get_voltage,
.set_voltage_sel = lp3972_dcdc_set_voltage_sel,
};
static const struct regulator_desc regulators[] = {
{
.name = "LDO1",
.id = LP3972_LDO1,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo1_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "LDO2",
.id = LP3972_LDO2,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "LDO3",
.id = LP3972_LDO3,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "LDO4",
.id = LP3972_LDO4,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo4_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "LDO5",
.id = LP3972_LDO5,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo5_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "DCDC1",
.id = LP3972_DCDC1,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck1_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "DCDC2",
.id = LP3972_DCDC2,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "DCDC3",
.id = LP3972_DCDC3,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
};
static int __devinit setup_regulators(struct lp3972 *lp3972,
struct lp3972_platform_data *pdata)
{
int i, err;
lp3972->num_regulators = pdata->num_regulators;
lp3972->rdev = kcalloc(pdata->num_regulators,
sizeof(struct regulator_dev *), GFP_KERNEL);
if (!lp3972->rdev) {
err = -ENOMEM;
goto err_nomem;
}
/* Instantiate the regulators */
for (i = 0; i < pdata->num_regulators; i++) {
struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
struct regulator_config config = { };
config.dev = lp3972->dev;
config.init_data = reg->initdata;
config.driver_data = lp3972;
lp3972->rdev[i] = regulator_register(&regulators[reg->id],
&config);
if (IS_ERR(lp3972->rdev[i])) {
err = PTR_ERR(lp3972->rdev[i]);
dev_err(lp3972->dev, "regulator init failed: %d\n",
err);
goto error;
}
}
return 0;
error:
while (--i >= 0)
regulator_unregister(lp3972->rdev[i]);
kfree(lp3972->rdev);
lp3972->rdev = NULL;
err_nomem:
return err;
}
static int __devinit lp3972_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct lp3972 *lp3972;
struct lp3972_platform_data *pdata = i2c->dev.platform_data;
int ret;
u16 val;
if (!pdata) {
dev_dbg(&i2c->dev, "No platform init data supplied\n");
return -ENODEV;
}
lp3972 = kzalloc(sizeof(struct lp3972), GFP_KERNEL);
if (!lp3972)
return -ENOMEM;
lp3972->i2c = i2c;
lp3972->dev = &i2c->dev;
mutex_init(&lp3972->io_lock);
/* Detect LP3972 */
ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val);
if (ret == 0 &&
(val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) {
ret = -ENODEV;
dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val);
}
if (ret < 0) {
dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret);
goto err_detect;
}
ret = setup_regulators(lp3972, pdata);
if (ret < 0)
goto err_detect;
i2c_set_clientdata(i2c, lp3972);
return 0;
err_detect:
kfree(lp3972);
return ret;
}
static int __devexit lp3972_i2c_remove(struct i2c_client *i2c)
{
struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
int i;
for (i = 0; i < lp3972->num_regulators; i++)
regulator_unregister(lp3972->rdev[i]);
kfree(lp3972->rdev);
kfree(lp3972);
return 0;
}
static const struct i2c_device_id lp3972_i2c_id[] = {
{ "lp3972", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id);
static struct i2c_driver lp3972_i2c_driver = {
.driver = {
.name = "lp3972",
.owner = THIS_MODULE,
},
.probe = lp3972_i2c_probe,
.remove = __devexit_p(lp3972_i2c_remove),
.id_table = lp3972_i2c_id,
};
static int __init lp3972_module_init(void)
{
return i2c_add_driver(&lp3972_i2c_driver);
}
subsys_initcall(lp3972_module_init);
static void __exit lp3972_module_exit(void)
{
i2c_del_driver(&lp3972_i2c_driver);
}
module_exit(lp3972_module_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Axel Lin <axel.lin@gmail.com>");
MODULE_DESCRIPTION("LP3972 PMIC driver");
Reference in New Issue View Git Blame Copy Permalink