mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-24 18:38:38 +00:00
56a68a500f
This patch removes some code that became dead code after the ATARI_ACSI
removal.
It also indirectly fixes the following bug introduced by
commit c2bcf3b897:
config ATARI_SLM
tristate "Atari SLM laser printer support"
- depends on ATARI && ATARI_ACSI!=n
+ depends on ATARI
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
316 lines
9.7 KiB
Plaintext
316 lines
9.7 KiB
Plaintext
Wed 2-Aug-95 <matti.aarnio@utu.fi>
|
|
|
|
Linux network driver modules
|
|
|
|
Do not mistake this for "README.modules" at the top-level
|
|
directory! That document tells about modules in general, while
|
|
this one tells only about network device driver modules.
|
|
|
|
This is a potpourri of INSMOD-time(*) configuration options
|
|
(if such exists) and their default values of various modules
|
|
in the Linux network drivers collection.
|
|
|
|
Some modules have also hidden (= non-documented) tunable values.
|
|
The choice of not documenting them is based on general belief, that
|
|
the less the user needs to know, the better. (There are things that
|
|
driver developers can use, others should not confuse themselves.)
|
|
|
|
In many cases it is highly preferred that insmod:ing is done
|
|
ONLY with defining an explicit address for the card, AND BY
|
|
NOT USING AUTO-PROBING!
|
|
|
|
Now most cards have some explicitly defined base address that they
|
|
are compiled with (to avoid auto-probing, among other things).
|
|
If that compiled value does not match your actual configuration,
|
|
do use the "io=0xXXX" -parameter for the insmod, and give there
|
|
a value matching your environment.
|
|
|
|
If you are adventurous, you can ask the driver to autoprobe
|
|
by using the "io=0" parameter, however it is a potentially dangerous
|
|
thing to do in a live system. (If you don't know where the
|
|
card is located, you can try autoprobing, and after possible
|
|
crash recovery, insmod with proper IO-address..)
|
|
|
|
--------------------------
|
|
(*) "INSMOD-time" means when you load module with
|
|
/sbin/insmod you can feed it optional parameters.
|
|
See "man insmod".
|
|
--------------------------
|
|
|
|
|
|
8390 based Network Modules (Paul Gortmaker, Nov 12, 1995)
|
|
--------------------------
|
|
|
|
(Includes: smc-ultra, ne, wd, 3c503, hp, hp-plus, e2100 and ac3200)
|
|
|
|
The 8390 series of network drivers now support multiple card systems without
|
|
reloading the same module multiple times (memory efficient!) This is done by
|
|
specifying multiple comma separated values, such as:
|
|
|
|
insmod 3c503.o io=0x280,0x300,0x330,0x350 xcvr=0,1,0,1
|
|
|
|
The above would have the one module controlling four 3c503 cards, with card 2
|
|
and 4 using external transceivers. The "insmod" manual describes the usage
|
|
of comma separated value lists.
|
|
|
|
It is *STRONGLY RECOMMENDED* that you supply "io=" instead of autoprobing.
|
|
If an "io=" argument is not supplied, then the ISA drivers will complain
|
|
about autoprobing being not recommended, and begrudgingly autoprobe for
|
|
a *SINGLE CARD ONLY* -- if you want to use multiple cards you *have* to
|
|
supply an "io=0xNNN,0xQQQ,..." argument.
|
|
|
|
The ne module is an exception to the above. A NE2000 is essentially an
|
|
8390 chip, some bus glue and some RAM. Because of this, the ne probe is
|
|
more invasive than the rest, and so at boot we make sure the ne probe is
|
|
done last of all the 8390 cards (so that it won't trip over other 8390 based
|
|
cards) With modules we can't ensure that all other non-ne 8390 cards have
|
|
already been found. Because of this, the ne module REQUIRES an "io=0xNNN"
|
|
argument passed in via insmod. It will refuse to autoprobe.
|
|
|
|
It is also worth noting that auto-IRQ probably isn't as reliable during
|
|
the flurry of interrupt activity on a running machine. Cards such as the
|
|
ne2000 that can't get the IRQ setting from an EEPROM or configuration
|
|
register are probably best supplied with an "irq=M" argument as well.
|
|
|
|
|
|
----------------------------------------------------------------------
|
|
Card/Module List - Configurable Parameters and Default Values
|
|
----------------------------------------------------------------------
|
|
|
|
3c501.c:
|
|
io = 0x280 IO base address
|
|
irq = 5 IRQ
|
|
(Probes ports: 0x280, 0x300)
|
|
|
|
3c503.c:
|
|
io = 0 (It will complain if you don't supply an "io=0xNNN")
|
|
irq = 0 (IRQ software selected by driver using autoIRQ)
|
|
xcvr = 0 (Use xcvr=1 to select external transceiver.)
|
|
(Probes ports: 0x300, 0x310, 0x330, 0x350, 0x250, 0x280, 0x2A0, 0x2E0)
|
|
|
|
3c505.c:
|
|
io = 0
|
|
irq = 0
|
|
dma = 6 (not autoprobed)
|
|
(Probes ports: 0x300, 0x280, 0x310)
|
|
|
|
3c507.c:
|
|
io = 0x300
|
|
irq = 0
|
|
(Probes ports: 0x300, 0x320, 0x340, 0x280)
|
|
|
|
3c509.c:
|
|
io = 0
|
|
irq = 0
|
|
( Module load-time probing Works reliably only on EISA, ISA ID-PROBE
|
|
IS NOT RELIABLE! Compile this driver statically into kernel for
|
|
now, if you need it auto-probing on an ISA-bus machine. )
|
|
|
|
8390.c:
|
|
(No public options, several other modules need this one)
|
|
|
|
a2065.c:
|
|
Since this is a Zorro board, it supports full autoprobing, even for
|
|
multiple boards. (m68k/Amiga)
|
|
|
|
ac3200.c:
|
|
io = 0 (Checks 0x1000 to 0x8fff in 0x1000 intervals)
|
|
irq = 0 (Read from config register)
|
|
(EISA probing..)
|
|
|
|
apricot.c:
|
|
io = 0x300 (Can't be altered!)
|
|
irq = 10
|
|
|
|
arcnet.c:
|
|
io = 0
|
|
irqnum = 0
|
|
shmem = 0
|
|
num = 0
|
|
DO SET THESE MANUALLY AT INSMOD!
|
|
(When probing, looks at the following possible addresses:
|
|
Suggested ones:
|
|
0x300, 0x2E0, 0x2F0, 0x2D0
|
|
Other ones:
|
|
0x200, 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x270,
|
|
0x280, 0x290, 0x2A0, 0x2B0, 0x2C0,
|
|
0x310, 0x320, 0x330, 0x340, 0x350, 0x360, 0x370,
|
|
0x380, 0x390, 0x3A0, 0x3E0, 0x3F0 )
|
|
|
|
ariadne.c:
|
|
Since this is a Zorro board, it supports full autoprobing, even for
|
|
multiple boards. (m68k/Amiga)
|
|
|
|
at1700.c:
|
|
io = 0x260
|
|
irq = 0
|
|
(Probes ports: 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300)
|
|
|
|
atarilance.c:
|
|
Supports full autoprobing. (m68k/Atari)
|
|
|
|
atp.c: *Not modularized*
|
|
(Probes ports: 0x378, 0x278, 0x3BC;
|
|
fixed IRQs: 5 and 7 )
|
|
|
|
cops.c:
|
|
io = 0x240
|
|
irq = 5
|
|
nodeid = 0 (AutoSelect = 0, NodeID 1-254 is hand selected.)
|
|
(Probes ports: 0x240, 0x340, 0x200, 0x210, 0x220, 0x230, 0x260,
|
|
0x2A0, 0x300, 0x310, 0x320, 0x330, 0x350, 0x360)
|
|
|
|
de4x5.c:
|
|
io = 0x000b
|
|
irq = 10
|
|
is_not_dec = 0 -- For non-DEC card using DEC 21040/21041/21140 chip, set this to 1
|
|
(EISA, and PCI probing)
|
|
|
|
de600.c:
|
|
de600_debug = 0
|
|
(On port 0x378, irq 7 -- lpt1; compile time configurable)
|
|
|
|
de620.c:
|
|
bnc = 0, utp = 0 <-- Force media by setting either.
|
|
io = 0x378 (also compile-time configurable)
|
|
irq = 7
|
|
|
|
depca.c:
|
|
io = 0x200
|
|
irq = 7
|
|
(Probes ports: ISA: 0x300, 0x200;
|
|
EISA: 0x0c00 )
|
|
|
|
dummy.c:
|
|
No options
|
|
|
|
e2100.c:
|
|
io = 0 (It will complain if you don't supply an "io=0xNNN")
|
|
irq = 0 (IRQ software selected by driver)
|
|
mem = 0 (Override default shared memory start of 0xd0000)
|
|
xcvr = 0 (Use xcvr=1 to select external transceiver.)
|
|
(Probes ports: 0x300, 0x280, 0x380, 0x220)
|
|
|
|
eepro.c:
|
|
io = 0x200
|
|
irq = 0
|
|
(Probes ports: 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360)
|
|
|
|
eexpress.c:
|
|
io = 0x300
|
|
irq = 0 (IRQ value read from EEPROM)
|
|
(Probes ports: 0x300, 0x270, 0x320, 0x340)
|
|
|
|
eql.c:
|
|
(No parameters)
|
|
|
|
ewrk3.c:
|
|
io = 0x300
|
|
irq = 5
|
|
(With module no autoprobing!
|
|
On EISA-bus does EISA probing.
|
|
Static linkage probes ports on ISA bus:
|
|
0x100, 0x120, 0x140, 0x160, 0x180, 0x1A0, 0x1C0,
|
|
0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
|
|
0x300, 0x340, 0x360, 0x380, 0x3A0, 0x3C0)
|
|
|
|
hp-plus.c:
|
|
io = 0 (It will complain if you don't supply an "io=0xNNN")
|
|
irq = 0 (IRQ read from configuration register)
|
|
(Probes ports: 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340)
|
|
|
|
hp.c:
|
|
io = 0 (It will complain if you don't supply an "io=0xNNN")
|
|
irq = 0 (IRQ software selected by driver using autoIRQ)
|
|
(Probes ports: 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240)
|
|
|
|
hp100.c:
|
|
hp100_port = 0 (IO-base address)
|
|
(Does EISA-probing, if on EISA-slot;
|
|
On ISA-bus probes all ports from 0x100 thru to 0x3E0
|
|
in increments of 0x020)
|
|
|
|
hydra.c:
|
|
Since this is a Zorro board, it supports full autoprobing, even for
|
|
multiple boards. (m68k/Amiga)
|
|
|
|
ibmtr.c:
|
|
io = 0xa20, 0xa24 (autoprobed by default)
|
|
irq = 0 (driver cannot select irq - read from hardware)
|
|
mem = 0 (shared memory base set at 0xd0000 and not yet
|
|
able to override thru mem= parameter.)
|
|
|
|
lance.c: *Not modularized*
|
|
(PCI, and ISA probing; "CONFIG_PCI" needed for PCI support)
|
|
(Probes ISA ports: 0x300, 0x320, 0x340, 0x360)
|
|
|
|
loopback.c: *Static kernel component*
|
|
|
|
ne.c:
|
|
io = 0 (Explicitly *requires* an "io=0xNNN" value)
|
|
irq = 0 (Tries to determine configured IRQ via autoIRQ)
|
|
(Probes ports: 0x300, 0x280, 0x320, 0x340, 0x360)
|
|
|
|
net_init.c: *Static kernel component*
|
|
|
|
ni52.c: *Not modularized*
|
|
(Probes ports: 0x300, 0x280, 0x360, 0x320, 0x340
|
|
mems: 0xD0000, 0xD2000, 0xC8000, 0xCA000,
|
|
0xD4000, 0xD6000, 0xD8000 )
|
|
|
|
ni65.c: *Not modularized* **16MB MEMORY BARRIER BUG**
|
|
(Probes ports: 0x300, 0x320, 0x340, 0x360)
|
|
|
|
pi2.c: *Not modularized* (well, NON-STANDARD modularization!)
|
|
Only one card supported at this time.
|
|
(Probes ports: 0x380, 0x300, 0x320, 0x340, 0x360, 0x3A0)
|
|
|
|
plip.c:
|
|
io = 0
|
|
irq = 0 (by default, uses IRQ 5 for port at 0x3bc, IRQ 7
|
|
for port at 0x378, and IRQ 2 for port at 0x278)
|
|
(Probes ports: 0x278, 0x378, 0x3bc)
|
|
|
|
ppp.c:
|
|
No options (ppp-2.2+ has some, this is based on non-dynamic
|
|
version from ppp-2.1.2d)
|
|
|
|
seeq8005.c: *Not modularized*
|
|
(Probes ports: 0x300, 0x320, 0x340, 0x360)
|
|
|
|
skeleton.c: *Skeleton*
|
|
|
|
slhc.c:
|
|
No configuration parameters
|
|
|
|
slip.c:
|
|
slip_maxdev = 256 (default value from SL_NRUNIT on slip.h)
|
|
|
|
|
|
smc-ultra.c:
|
|
io = 0 (It will complain if you don't supply an "io=0xNNN")
|
|
irq = 0 (IRQ val. read from EEPROM)
|
|
(Probes ports: 0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380)
|
|
|
|
tulip.c: *Partial modularization*
|
|
(init-time memory allocation makes problems..)
|
|
|
|
tunnel.c:
|
|
No insmod parameters
|
|
|
|
wavelan.c:
|
|
io = 0x390 (Settable, but change not recommended)
|
|
irq = 0 (Not honoured, if changed..)
|
|
|
|
wd.c:
|
|
io = 0 (It will complain if you don't supply an "io=0xNNN")
|
|
irq = 0 (IRQ val. read from EEPROM, ancient cards use autoIRQ)
|
|
mem = 0 (Force shared-memory on address 0xC8000, or whatever..)
|
|
mem_end = 0 (Force non-std. mem. size via supplying mem_end val.)
|
|
(eg. for 32k WD8003EBT, use mem=0xd0000 mem_end=0xd8000)
|
|
(Probes ports: 0x300, 0x280, 0x380, 0x240)
|
|
|
|
znet.c: *Not modularized*
|
|
(Only one device on Zenith Z-Note (notebook?) systems,
|
|
configuration information from (EE)PROM)
|