FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-24 10:28:57 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
50640f1693
linux/net/mac80211
History
Johannes Berg 30eb1dc2c4 mac80211: properly track HT/VHT operation changes 
A while ago, I made the mac80211 station code never change
the channel type after association. This solved a number of
issues but is ultimately wrong, we should react if the AP
changes the HT operation IE and switches bandwidth. One of
the issues is that we associate as HT40 capable, but if the
AP ever switches to 40 MHz we won't be able to receive such
frames because we never set our channel to 40 MHz.

This addresses this and VHT operation changes. If there's a
change that is incompatible with our setup, e.g. if the AP
decides to change the channel entirely (and for some reason
we still hear the beacon) we'll just disconnect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:37 +01:00
..
aes_ccm.c
aes_ccm.h
aes_cmac.c mac80211: include export.h in aes_cmac 2012-11-07 18:01:54 +01:00
aes_cmac.h
agg-rx.c mac80211: improve aggregation debug messages 2013-01-18 21:55:15 +01:00
agg-tx.c mac80211: fix aggregation state with current drivers 2013-01-24 15:43:51 +01:00
cfg.c mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 2013-02-15 09:41:30 +01:00
cfg.h
chan.c mac80211: add ieee80211_vif_change_bandwidth 2013-02-15 09:41:36 +01:00
debug.h mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_key.c mac80211: add debug file for mic failure 2012-12-05 09:44:41 +01:00
debugfs_key.h
debugfs_netdev.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_netdev.h
debugfs_sta.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_sta.h
debugfs.c mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE 2013-02-11 18:45:01 +01:00
debugfs.h mac80211: use __printf attribute in debugfs 2012-10-18 09:01:57 +02:00
driver-ops.h mac80211: don't call bss_info_changed on p2p-device/monitor 2013-02-15 09:41:11 +01:00
event.c
ht.c mac80211: handle VHT operating mode notification 2013-02-15 09:41:32 +01:00
ibss.c mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 2013-02-15 09:41:30 +01:00
ieee80211_i.h mac80211: add ieee80211_vif_change_bandwidth 2013-02-15 09:41:36 +01:00
iface.c mac80211: free ps->bc_buf skbs on vlan device stop 2013-02-15 09:41:08 +01:00
Kconfig mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
key.c mac80211: add op to configure default key id 2013-01-18 13:30:21 +01:00
key.h mac80211: add debug file for mic failure 2012-12-05 09:44:41 +01:00
led.c leds: Rename led_brightness_set() to led_set_brightness() 2012-07-24 07:52:34 +08:00
led.h
main.c mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
Makefile mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
mesh_hwmp.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
mesh_pathtbl.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
mesh_plink.c mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 2013-02-15 09:41:30 +01:00
mesh_ps.c mac80211: consolidate MBSS change notification 2013-02-15 09:41:09 +01:00
mesh_sync.c mac80211: fix for mesh sync to indicate TBTT adjustment 2012-11-30 12:41:46 +01:00
mesh.c mac80211: consolidate MBSS change notification 2013-02-15 09:41:09 +01:00
mesh.h mac80211: consolidate MBSS change notification 2013-02-15 09:41:09 +01:00
michael.c
michael.h
mlme.c mac80211: properly track HT/VHT operation changes 2013-02-15 09:41:37 +01:00
offchannel.c mac80211: Add flushes before going off-channel 2013-02-11 22:52:21 +01:00
pm.c mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
rate.c mac80211: convert to channel definition struct 2012-11-26 12:42:59 +01:00
rate.h mac80211: track number of spatial streams 2013-02-15 09:41:31 +01:00
rc80211_minstrel_debugfs.c
rc80211_minstrel_ht_debugfs.c mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel_ht.c mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 2013-02-15 09:41:30 +01:00
rc80211_minstrel_ht.h mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel.c mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel.h mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_pid_algo.c
rc80211_pid_debugfs.c
rc80211_pid.h
rx.c mac80211: handle operating mode notif in beacon/assoc response 2013-02-15 09:41:34 +01:00
scan.c mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
spectmgmt.c
sta_info.c mac80211: use spin_lock_bh() for tim_lock 2013-02-15 09:41:12 +01:00
sta_info.h mac80211: handle VHT operating mode notification 2013-02-15 09:41:32 +01:00
status.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
tkip.c mac80211: use spin_lock_bh() for TKIP lock 2013-02-15 09:41:13 +01:00
tkip.h
trace.c mac80211: trace debug messages 2012-06-24 11:33:18 +02:00
trace.h mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
tx.c mac80211: use spin_lock_bh() for tim_lock 2013-02-15 09:41:12 +01:00
util.c mac80211: handle operating mode notif in beacon/assoc response 2013-02-15 09:41:34 +01:00
vht.c mac80211: handle operating mode notif in beacon/assoc response 2013-02-15 09:41:34 +01:00
wep.c mac80211: fix network header location when adding encryption headers 2012-05-16 12:47:43 -04:00
wep.h
wme.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
wme.h mac80211: save wmm_acm per sdata 2012-06-20 17:35:22 +02:00
wpa.c mac80211: use spin_lock_bh() for TKIP lock 2013-02-15 09:41:13 +01:00
wpa.h