linux/include/linux/omap-dma.h
Peter Ujfalusi 020c62ae38 dmaengine: omap-dma: Add support for DMA filter mapping to slave devices
Add support for providing device to filter_fn mapping so client drivers
can switch to use the dma_request_chan() API.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-18 11:17:26 +05:30

359 lines
10 KiB
C

#ifndef __LINUX_OMAP_DMA_H
#define __LINUX_OMAP_DMA_H
#include <linux/omap-dmaengine.h>
/*
* Legacy OMAP DMA handling defines and functions
*
* NOTE: Do not use these any longer.
*
* Use the generic dmaengine functions as defined in
* include/linux/dmaengine.h.
*
* Copyright (C) 2003 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
*
*/
#include <linux/platform_device.h>
#define INT_DMA_LCD (NR_IRQS_LEGACY + 25)
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
#define OMAP_DMA_HALF_IRQ (1 << 2)
#define OMAP_DMA_FRAME_IRQ (1 << 3)
#define OMAP_DMA_LAST_IRQ (1 << 4)
#define OMAP_DMA_BLOCK_IRQ (1 << 5)
#define OMAP1_DMA_SYNC_IRQ (1 << 6)
#define OMAP2_DMA_PKT_IRQ (1 << 7)
#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8)
#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9)
#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10)
#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11)
#define OMAP_DMA_CCR_EN (1 << 7)
#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9)
#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10)
#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24)
#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25)
#define OMAP_DMA_DATA_TYPE_S8 0x00
#define OMAP_DMA_DATA_TYPE_S16 0x01
#define OMAP_DMA_DATA_TYPE_S32 0x02
#define OMAP_DMA_SYNC_ELEMENT 0x00
#define OMAP_DMA_SYNC_FRAME 0x01
#define OMAP_DMA_SYNC_BLOCK 0x02
#define OMAP_DMA_SYNC_PACKET 0x03
#define OMAP_DMA_DST_SYNC_PREFETCH 0x02
#define OMAP_DMA_SRC_SYNC 0x01
#define OMAP_DMA_DST_SYNC 0x00
#define OMAP_DMA_PORT_EMIFF 0x00
#define OMAP_DMA_PORT_EMIFS 0x01
#define OMAP_DMA_PORT_OCP_T1 0x02
#define OMAP_DMA_PORT_TIPB 0x03
#define OMAP_DMA_PORT_OCP_T2 0x04
#define OMAP_DMA_PORT_MPUI 0x05
#define OMAP_DMA_AMODE_CONSTANT 0x00
#define OMAP_DMA_AMODE_POST_INC 0x01
#define OMAP_DMA_AMODE_SINGLE_IDX 0x02
#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03
#define DMA_DEFAULT_FIFO_DEPTH 0x10
#define DMA_DEFAULT_ARB_RATE 0x01
/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */
#define DMA_THREAD_RESERVE_ONET (0x01 << 12)
#define DMA_THREAD_RESERVE_TWOT (0x02 << 12)
#define DMA_THREAD_RESERVE_THREET (0x03 << 12)
#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */
#define DMA_THREAD_FIFO_75 (0x01 << 14)
#define DMA_THREAD_FIFO_25 (0x02 << 14)
#define DMA_THREAD_FIFO_50 (0x03 << 14)
/* DMA4_OCP_SYSCONFIG bits */
#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12)
#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8)
#define DMA_SYSCONFIG_EMUFREE (1 << 5)
#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3)
#define DMA_SYSCONFIG_SOFTRESET (1 << 2)
#define DMA_SYSCONFIG_AUTOIDLE (1 << 0)
#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12)
#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3)
#define DMA_IDLEMODE_SMARTIDLE 0x2
#define DMA_IDLEMODE_NO_IDLE 0x1
#define DMA_IDLEMODE_FORCE_IDLE 0x0
/* Chaining modes*/
#ifndef CONFIG_ARCH_OMAP1
#define OMAP_DMA_STATIC_CHAIN 0x1
#define OMAP_DMA_DYNAMIC_CHAIN 0x2
#define OMAP_DMA_CHAIN_ACTIVE 0x1
#define OMAP_DMA_CHAIN_INACTIVE 0x0
#endif
#define DMA_CH_PRIO_HIGH 0x1
#define DMA_CH_PRIO_LOW 0x0 /* Def */
/* Errata handling */
#define IS_DMA_ERRATA(id) (errata & (id))
#define SET_DMA_ERRATA(id) (errata |= (id))
#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0)
#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1)
#define DMA_ERRATA_i378 BIT(0x2)
#define DMA_ERRATA_i541 BIT(0x3)
#define DMA_ERRATA_i88 BIT(0x4)
#define DMA_ERRATA_3_3 BIT(0x5)
#define DMA_ROMCODE_BUG BIT(0x6)
/* Attributes for OMAP DMA Contrller */
#define DMA_LINKED_LCH BIT(0x0)
#define GLOBAL_PRIORITY BIT(0x1)
#define RESERVE_CHANNEL BIT(0x2)
#define IS_CSSA_32 BIT(0x3)
#define IS_CDSA_32 BIT(0x4)
#define IS_RW_PRIORITY BIT(0x5)
#define ENABLE_1510_MODE BIT(0x6)
#define SRC_PORT BIT(0x7)
#define DST_PORT BIT(0x8)
#define SRC_INDEX BIT(0x9)
#define DST_INDEX BIT(0xa)
#define IS_BURST_ONLY4 BIT(0xb)
#define CLEAR_CSR_ON_READ BIT(0xc)
#define IS_WORD_16 BIT(0xd)
#define ENABLE_16XX_MODE BIT(0xe)
#define HS_CHANNELS_RESERVED BIT(0xf)
#define DMA_ENGINE_HANDLE_IRQ BIT(0x10)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19)
#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20)
enum omap_reg_offsets {
GCR, GSCR, GRST1, HW_ID,
PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID,
PCHD_ID, CAPS_0, CAPS_1, CAPS_2,
CAPS_3, CAPS_4, PCH2_SR, PCH0_SR,
PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0,
IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0,
IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS,
OCP_SYSCONFIG,
/* omap1+ specific */
CPC, CCR2, LCH_CTRL,
/* Common registers for all omap's */
CSDP, CCR, CICR, CSR,
CEN, CFN, CSFI, CSEI,
CSAC, CDAC, CDEI,
CDFI, CLNK_CTRL,
/* Channel specific registers */
CSSA, CDSA, COLOR,
CCEN, CCFN,
/* omap3630 and omap4 specific */
CDP, CNDP, CCDN,
};
enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_DIS = 0,
OMAP_DMA_DATA_BURST_4,
OMAP_DMA_DATA_BURST_8,
OMAP_DMA_DATA_BURST_16,
};
enum end_type {
OMAP_DMA_LITTLE_ENDIAN = 0,
OMAP_DMA_BIG_ENDIAN
};
enum omap_dma_color_mode {
OMAP_DMA_COLOR_DIS = 0,
OMAP_DMA_CONSTANT_FILL,
OMAP_DMA_TRANSPARENT_COPY
};
enum omap_dma_write_mode {
OMAP_DMA_WRITE_NON_POSTED = 0,
OMAP_DMA_WRITE_POSTED,
OMAP_DMA_WRITE_LAST_NON_POSTED
};
enum omap_dma_channel_mode {
OMAP_DMA_LCH_2D = 0,
OMAP_DMA_LCH_G,
OMAP_DMA_LCH_P,
OMAP_DMA_LCH_PD
};
struct omap_dma_channel_params {
int data_type; /* data type 8,16,32 */
int elem_count; /* number of elements in a frame */
int frame_count; /* number of frames in a element */
int src_port; /* Only on OMAP1 REVISIT: Is this needed? */
int src_amode; /* constant, post increment, indexed,
double indexed */
unsigned long src_start; /* source address : physical */
int src_ei; /* source element index */
int src_fi; /* source frame index */
int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */
int dst_amode; /* constant, post increment, indexed,
double indexed */
unsigned long dst_start; /* source address : physical */
int dst_ei; /* source element index */
int dst_fi; /* source frame index */
int trigger; /* trigger attached if the channel is
synchronized */
int sync_mode; /* sycn on element, frame , block or packet */
int src_or_dst_synch; /* source synch(1) or destination synch(0) */
int ie; /* interrupt enabled */
unsigned char read_prio;/* read priority */
unsigned char write_prio;/* write priority */
#ifndef CONFIG_ARCH_OMAP1
enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
#endif
};
struct omap_dma_lch {
int next_lch;
int dev_id;
u16 saved_csr;
u16 enabled_irqs;
const char *dev_name;
void (*callback)(int lch, u16 ch_status, void *data);
void *data;
long flags;
/* required for Dynamic chaining */
int prev_linked_ch;
int next_linked_ch;
int state;
int chain_id;
int status;
};
struct omap_dma_dev_attr {
u32 dev_caps;
u16 lch_count;
u16 chan_count;
};
enum {
OMAP_DMA_REG_NONE,
OMAP_DMA_REG_16BIT,
OMAP_DMA_REG_2X16BIT,
OMAP_DMA_REG_32BIT,
};
struct omap_dma_reg {
u16 offset;
u8 stride;
u8 type;
};
#define SDMA_FILTER_PARAM(hw_req) ((int[]) { (hw_req) })
struct dma_slave_map;
/* System DMA platform data structure */
struct omap_system_dma_plat_info {
const struct omap_dma_reg *reg_map;
unsigned channel_stride;
struct omap_dma_dev_attr *dma_attr;
u32 errata;
void (*show_dma_caps)(void);
void (*clear_lch_regs)(int lch);
void (*clear_dma)(int lch);
void (*dma_write)(u32 val, int reg, int lch);
u32 (*dma_read)(int reg, int lch);
const struct dma_slave_map *slave_map;
int slavecnt;
};
#ifdef CONFIG_ARCH_OMAP2PLUS
#define dma_omap2plus() 1
#else
#define dma_omap2plus() 0
#endif
#define dma_omap1() (!dma_omap2plus())
#define __dma_omap15xx(d) (dma_omap1() && (d)->dev_caps & ENABLE_1510_MODE)
#define __dma_omap16xx(d) (dma_omap1() && (d)->dev_caps & ENABLE_16XX_MODE)
#define dma_omap15xx() __dma_omap15xx(d)
#define dma_omap16xx() __dma_omap16xx(d)
extern struct omap_system_dma_plat_info *omap_get_plat_info(void);
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch);
extern void omap_enable_dma_irq(int ch, u16 irq_bits);
extern void omap_disable_dma_irq(int ch, u16 irq_bits);
extern void omap_free_dma(int ch);
extern void omap_start_dma(int lch);
extern void omap_stop_dma(int lch);
extern void omap_set_dma_transfer_params(int lch, int data_type,
int elem_count, int frame_count,
int sync_mode,
int dma_trigger, int src_or_dst_synch);
extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start,
int src_ei, int src_fi);
extern void omap_set_dma_src_data_pack(int lch, int enable);
extern void omap_set_dma_src_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
unsigned long dest_start,
int dst_ei, int dst_fi);
extern void omap_set_dma_dest_data_pack(int lch, int enable);
extern void omap_set_dma_dest_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
extern void omap_set_dma_params(int lch,
struct omap_dma_channel_params *params);
extern void omap_dma_link_lch(int lch_head, int lch_queue);
extern int omap_set_dma_callback(int lch,
void (*callback)(int lch, u16 ch_status, void *data),
void *data);
extern dma_addr_t omap_get_dma_src_pos(int lch);
extern dma_addr_t omap_get_dma_dst_pos(int lch);
extern int omap_get_dma_active_status(int lch);
extern int omap_dma_running(void);
extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
int tparams);
void omap_dma_global_context_save(void);
void omap_dma_global_context_restore(void);
#if defined(CONFIG_ARCH_OMAP1) && IS_ENABLED(CONFIG_FB_OMAP)
#include <mach/lcd_dma.h>
#else
static inline int omap_lcd_dma_running(void)
{
return 0;
}
#endif
#endif /* __LINUX_OMAP_DMA_H */