mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-28 20:37:27 +00:00
cbcdd87593
Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
314 lines
7.4 KiB
C
314 lines
7.4 KiB
C
/*
|
|
* pata_winbond.c - Winbond VLB ATA controllers
|
|
* (C) 2006 Red Hat <alan@redhat.com>
|
|
*
|
|
* Support for the Winbond 83759A when operating in advanced mode.
|
|
* Multichip mode is not currently supported.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define DRV_NAME "pata_winbond"
|
|
#define DRV_VERSION "0.0.3"
|
|
|
|
#define NR_HOST 4 /* Two winbond controllers, two channels each */
|
|
|
|
struct winbond_data {
|
|
unsigned long config;
|
|
struct platform_device *platform_dev;
|
|
};
|
|
|
|
static struct ata_host *winbond_host[NR_HOST];
|
|
static struct winbond_data winbond_data[NR_HOST];
|
|
static int nr_winbond_host;
|
|
|
|
#ifdef MODULE
|
|
static int probe_winbond = 1;
|
|
#else
|
|
static int probe_winbond;
|
|
#endif
|
|
|
|
static DEFINE_SPINLOCK(winbond_lock);
|
|
|
|
static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&winbond_lock, flags);
|
|
outb(reg, port + 0x01);
|
|
outb(val, port + 0x02);
|
|
spin_unlock_irqrestore(&winbond_lock, flags);
|
|
}
|
|
|
|
static u8 winbond_readcfg(unsigned long port, u8 reg)
|
|
{
|
|
u8 val;
|
|
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&winbond_lock, flags);
|
|
outb(reg, port + 0x01);
|
|
val = inb(port + 0x02);
|
|
spin_unlock_irqrestore(&winbond_lock, flags);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct ata_timing t;
|
|
struct winbond_data *winbond = ap->host->private_data;
|
|
int active, recovery;
|
|
u8 reg;
|
|
int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
|
|
|
|
reg = winbond_readcfg(winbond->config, 0x81);
|
|
|
|
/* Get the timing data in cycles */
|
|
if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
|
|
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
|
|
else
|
|
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
|
|
|
|
active = (FIT(t.active, 3, 17) - 1) & 0x0F;
|
|
recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
|
|
timing = (active << 4) | recovery;
|
|
winbond_writecfg(winbond->config, timing, reg);
|
|
|
|
/* Load the setup timing */
|
|
|
|
reg = 0x35;
|
|
if (adev->class != ATA_DEV_ATA)
|
|
reg |= 0x08; /* FIFO off */
|
|
if (!ata_pio_need_iordy(adev))
|
|
reg |= 0x02; /* IORDY off */
|
|
reg |= (FIT(t.setup, 0, 3) << 6);
|
|
winbond_writecfg(winbond->config, timing + 1, reg);
|
|
}
|
|
|
|
|
|
static void winbond_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
|
|
{
|
|
struct ata_port *ap = adev->link->ap;
|
|
int slop = buflen & 3;
|
|
|
|
if (ata_id_has_dword_io(adev->id)) {
|
|
if (write_data)
|
|
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
|
else
|
|
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
|
|
|
if (unlikely(slop)) {
|
|
u32 pad;
|
|
if (write_data) {
|
|
memcpy(&pad, buf + buflen - slop, slop);
|
|
pad = le32_to_cpu(pad);
|
|
iowrite32(pad, ap->ioaddr.data_addr);
|
|
} else {
|
|
pad = ioread32(ap->ioaddr.data_addr);
|
|
pad = cpu_to_le16(pad);
|
|
memcpy(buf + buflen - slop, &pad, slop);
|
|
}
|
|
}
|
|
} else
|
|
ata_data_xfer(adev, buf, buflen, write_data);
|
|
}
|
|
|
|
static struct scsi_host_template winbond_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static struct ata_port_operations winbond_port_ops = {
|
|
.set_piomode = winbond_set_piomode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = winbond_data_xfer,
|
|
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_sff_port_start,
|
|
};
|
|
|
|
/**
|
|
* winbond_init_one - attach a winbond interface
|
|
* @type: Type to display
|
|
* @io: I/O port start
|
|
* @irq: interrupt line
|
|
* @fast: True if on a > 33Mhz VLB
|
|
*
|
|
* Register a VLB bus IDE interface. Such interfaces are PIO and we
|
|
* assume do not support IRQ sharing.
|
|
*/
|
|
|
|
static __init int winbond_init_one(unsigned long port)
|
|
{
|
|
struct platform_device *pdev;
|
|
u8 reg;
|
|
int i, rc;
|
|
|
|
reg = winbond_readcfg(port, 0x81);
|
|
reg |= 0x80; /* jumpered mode off */
|
|
winbond_writecfg(port, 0x81, reg);
|
|
reg = winbond_readcfg(port, 0x83);
|
|
reg |= 0xF0; /* local control */
|
|
winbond_writecfg(port, 0x83, reg);
|
|
reg = winbond_readcfg(port, 0x85);
|
|
reg |= 0xF0; /* programmable timing */
|
|
winbond_writecfg(port, 0x85, reg);
|
|
|
|
reg = winbond_readcfg(port, 0x81);
|
|
|
|
if (!(reg & 0x03)) /* Disabled */
|
|
return 0;
|
|
|
|
for (i = 0; i < 2 ; i ++) {
|
|
unsigned long cmd_port = 0x1F0 - (0x80 * i);
|
|
unsigned long ctl_port = cmd_port + 0x206;
|
|
struct ata_host *host;
|
|
struct ata_port *ap;
|
|
void __iomem *cmd_addr, *ctl_addr;
|
|
|
|
if (!(reg & (1 << i)))
|
|
continue;
|
|
|
|
pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
|
|
if (IS_ERR(pdev))
|
|
return PTR_ERR(pdev);
|
|
|
|
rc = -ENOMEM;
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
if (!host)
|
|
goto err_unregister;
|
|
ap = host->ports[0];
|
|
|
|
rc = -ENOMEM;
|
|
cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
|
|
ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
|
|
if (!cmd_addr || !ctl_addr)
|
|
goto err_unregister;
|
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
|
|
|
|
ap->ops = &winbond_port_ops;
|
|
ap->pio_mask = 0x1F;
|
|
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
|
ap->ioaddr.cmd_addr = cmd_addr;
|
|
ap->ioaddr.altstatus_addr = ctl_addr;
|
|
ap->ioaddr.ctl_addr = ctl_addr;
|
|
ata_std_ports(&ap->ioaddr);
|
|
|
|
/* hook in a private data structure per channel */
|
|
host->private_data = &winbond_data[nr_winbond_host];
|
|
winbond_data[nr_winbond_host].config = port;
|
|
winbond_data[nr_winbond_host].platform_dev = pdev;
|
|
|
|
/* activate */
|
|
rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
|
|
&winbond_sht);
|
|
if (rc)
|
|
goto err_unregister;
|
|
|
|
winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister:
|
|
platform_device_unregister(pdev);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* winbond_init - attach winbond interfaces
|
|
*
|
|
* Attach winbond IDE interfaces by scanning the ports it may occupy.
|
|
*/
|
|
|
|
static __init int winbond_init(void)
|
|
{
|
|
static const unsigned long config[2] = { 0x130, 0x1B0 };
|
|
|
|
int ct = 0;
|
|
int i;
|
|
|
|
if (probe_winbond == 0)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Check both base addresses
|
|
*/
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
if (probe_winbond & (1<<i)) {
|
|
int ret = 0;
|
|
unsigned long port = config[i];
|
|
|
|
if (request_region(port, 2, "pata_winbond")) {
|
|
ret = winbond_init_one(port);
|
|
if(ret <= 0)
|
|
release_region(port, 2);
|
|
else ct+= ret;
|
|
}
|
|
}
|
|
}
|
|
if (ct != 0)
|
|
return 0;
|
|
return -ENODEV;
|
|
}
|
|
|
|
static __exit void winbond_exit(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nr_winbond_host; i++) {
|
|
ata_host_detach(winbond_host[i]);
|
|
release_region(winbond_data[i].config, 2);
|
|
platform_device_unregister(winbond_data[i].platform_dev);
|
|
}
|
|
}
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(winbond_init);
|
|
module_exit(winbond_exit);
|
|
|
|
module_param(probe_winbond, int, 0);
|
|
|