linux/arch/powerpc/boot
Timur Tabi f3fed682f7 powerpc/p1022ds: fix audio-related properties in the device tree
On the Freescale P1022DS reference board, the SSI audio controller is
connected in "asynchronous" mode to the codec's clocks, so the device tree
needs an "fsl,ssi-asynchronous" property.

Also remove the clock-frequency property from the wm8776 node, because
the clock is enabled only if U-Boot enables it, and U-Boot will set the
property if the clock is enabled.  A future version of the P1022DS audio
driver will configure the clock itself, but for now, the driver should
not be told that the clock is running when it isn't.

Also fix the FIFO depth to 15, instead of 16.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22 06:14:54 -05:00
..
dts powerpc/p1022ds: fix audio-related properties in the device tree 2011-06-22 06:14:54 -05:00
.gitignore
4xx.c
4xx.h
44x.h
addnote.c
bamboo.c
cpm-serial.c
crt0.S
crtsavres.S
cuboot-8xx.c
cuboot-52xx.c
cuboot-83xx.c
cuboot-85xx-cpm2.c
cuboot-85xx.c
cuboot-824x.c
cuboot-acadia.c
cuboot-amigaone.c
cuboot-bamboo.c
cuboot-c2k.c
cuboot-ebony.c
cuboot-hotfoot.c
cuboot-katmai.c
cuboot-kilauea.c
cuboot-mpc7448hpc2.c
cuboot-pq2.c
cuboot-rainier.c
cuboot-sam440ep.c
cuboot-sequoia.c
cuboot-taishan.c
cuboot-warp.c
cuboot-yosemite.c
cuboot.c
cuboot.h
dcr.h
devtree.c
div64.S
dummy.c
ebony.c
elf_util.c
elf.h
ep88xc.c
ep405.c
ep8248e.c
epapr.c
fixed-head.S
flatdevtree_env.h
fsl-soc.c
fsl-soc.h
gamecube-head.S
gamecube.c
gunzip_util.c
gunzip_util.h
hack-coff.c
holly.c
install.sh
io.h
libfdt_env.h
libfdt-wrapper.c
main.c
Makefile
mktree.c
mpc8xx.c
mpc8xx.h
mpc52xx-psc.c
mpsc.c
mv64x60_i2c.c
mv64x60.c
mv64x60.h
ns16550.c
of.c
of.h
ofconsole.c
oflib.c
ops.h
page.h
planetcore.c
planetcore.h
ppc_asm.h
ppcboot-hotfoot.h
ppcboot.h
pq2.c
pq2.h
prpmc2800.c
ps3-head.S
ps3-hvcall.S
ps3.c
README
redboot-8xx.c
redboot-83xx.c
redboot.h
reg.h
rs6000.h
serial.c
simple_alloc.c
simpleboot.c
stdio.c
stdio.h
stdlib.c
stdlib.h
string.h
string.S
treeboot-bamboo.c
treeboot-ebony.c
treeboot-iss4xx.c
treeboot-walnut.c
types.h
uartlite.c
ugecon.c
ugecon.h
util.S
virtex405-head.S
virtex.c
wii-head.S
wii.c
wrapper
zImage.coff.lds.S
zImage.lds.S
zImage.ps3.lds.S

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter