FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-23 01:40:30 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
55c0c530f7
linux/drivers/iio/magnetometer/st_magn_core.c
Linus Walleij a9fd053b56 iio: st_sensors: support active-low interrupts 
Most ST MEMS Sensors that support interrupts can also handle sending
an active low interrupt, i.e. going from high to low on data ready
(or other interrupt) and thus triggering on a falling edge to the
interrupt controller.

Set up logic to inspect the interrupt line we get for a sensor: if
it is triggering on rising edge, leave everything alone, but if it
triggers on falling edges, set up active low, and if unsupported
configurations appear: warn with errors and reconfigure the interrupt
to a rising edge, which all interrupt generating sensors support.

Create a local header for st_sensors_core.h to share functions
between the sensor core and the trigger setup code.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-10 12:35:32 +00:00

658 lines
19 KiB
C
Raw Blame History

/*
* STMicroelectronics magnetometers driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/common/st_sensors.h>
#include "st_magn.h"
#define ST_MAGN_NUMBER_DATA_CHANNELS 3
/* DEFAULT VALUE FOR SENSORS */
#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0X03
#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0X07
#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0X05
/* FULLSCALE */
#define ST_MAGN_FS_AVL_1300MG 1300
#define ST_MAGN_FS_AVL_1900MG 1900
#define ST_MAGN_FS_AVL_2500MG 2500
#define ST_MAGN_FS_AVL_4000MG 4000
#define ST_MAGN_FS_AVL_4700MG 4700
#define ST_MAGN_FS_AVL_5600MG 5600
#define ST_MAGN_FS_AVL_8000MG 8000
#define ST_MAGN_FS_AVL_8100MG 8100
#define ST_MAGN_FS_AVL_12000MG 12000
#define ST_MAGN_FS_AVL_15000MG 15000
#define ST_MAGN_FS_AVL_16000MG 16000
/* CUSTOM VALUES FOR SENSOR 0 */
#define ST_MAGN_0_ODR_ADDR 0x00
#define ST_MAGN_0_ODR_MASK 0x1c
#define ST_MAGN_0_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_0_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_0_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_0_ODR_AVL_8HZ_VAL 0x03
#define ST_MAGN_0_ODR_AVL_15HZ_VAL 0x04
#define ST_MAGN_0_ODR_AVL_30HZ_VAL 0x05
#define ST_MAGN_0_ODR_AVL_75HZ_VAL 0x06
#define ST_MAGN_0_ODR_AVL_220HZ_VAL 0x07
#define ST_MAGN_0_PW_ADDR 0x02
#define ST_MAGN_0_PW_MASK 0x03
#define ST_MAGN_0_PW_ON 0x00
#define ST_MAGN_0_PW_OFF 0x03
#define ST_MAGN_0_FS_ADDR 0x01
#define ST_MAGN_0_FS_MASK 0xe0
#define ST_MAGN_0_FS_AVL_1300_VAL 0x01
#define ST_MAGN_0_FS_AVL_1900_VAL 0x02
#define ST_MAGN_0_FS_AVL_2500_VAL 0x03
#define ST_MAGN_0_FS_AVL_4000_VAL 0x04
#define ST_MAGN_0_FS_AVL_4700_VAL 0x05
#define ST_MAGN_0_FS_AVL_5600_VAL 0x06
#define ST_MAGN_0_FS_AVL_8100_VAL 0x07
#define ST_MAGN_0_FS_AVL_1300_GAIN_XY 1100
#define ST_MAGN_0_FS_AVL_1900_GAIN_XY 855
#define ST_MAGN_0_FS_AVL_2500_GAIN_XY 670
#define ST_MAGN_0_FS_AVL_4000_GAIN_XY 450
#define ST_MAGN_0_FS_AVL_4700_GAIN_XY 400
#define ST_MAGN_0_FS_AVL_5600_GAIN_XY 330
#define ST_MAGN_0_FS_AVL_8100_GAIN_XY 230
#define ST_MAGN_0_FS_AVL_1300_GAIN_Z 980
#define ST_MAGN_0_FS_AVL_1900_GAIN_Z 760
#define ST_MAGN_0_FS_AVL_2500_GAIN_Z 600
#define ST_MAGN_0_FS_AVL_4000_GAIN_Z 400
#define ST_MAGN_0_FS_AVL_4700_GAIN_Z 355
#define ST_MAGN_0_FS_AVL_5600_GAIN_Z 295
#define ST_MAGN_0_FS_AVL_8100_GAIN_Z 205
#define ST_MAGN_0_MULTIREAD_BIT false
/* CUSTOM VALUES FOR SENSOR 1 */
#define ST_MAGN_1_WAI_EXP 0x3c
#define ST_MAGN_1_ODR_ADDR 0x00
#define ST_MAGN_1_ODR_MASK 0x1c
#define ST_MAGN_1_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_1_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_1_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_1_ODR_AVL_8HZ_VAL 0x03
#define ST_MAGN_1_ODR_AVL_15HZ_VAL 0x04
#define ST_MAGN_1_ODR_AVL_30HZ_VAL 0x05
#define ST_MAGN_1_ODR_AVL_75HZ_VAL 0x06
#define ST_MAGN_1_ODR_AVL_220HZ_VAL 0x07
#define ST_MAGN_1_PW_ADDR 0x02
#define ST_MAGN_1_PW_MASK 0x03
#define ST_MAGN_1_PW_ON 0x00
#define ST_MAGN_1_PW_OFF 0x03
#define ST_MAGN_1_FS_ADDR 0x01
#define ST_MAGN_1_FS_MASK 0xe0
#define ST_MAGN_1_FS_AVL_1300_VAL 0x01
#define ST_MAGN_1_FS_AVL_1900_VAL 0x02
#define ST_MAGN_1_FS_AVL_2500_VAL 0x03
#define ST_MAGN_1_FS_AVL_4000_VAL 0x04
#define ST_MAGN_1_FS_AVL_4700_VAL 0x05
#define ST_MAGN_1_FS_AVL_5600_VAL 0x06
#define ST_MAGN_1_FS_AVL_8100_VAL 0x07
#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 909
#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 1169
#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 1492
#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 2222
#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 2500
#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 3030
#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 4347
#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 1020
#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 1315
#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 1666
#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 2500
#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 2816
#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 3389
#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 4878
#define ST_MAGN_1_MULTIREAD_BIT false
/* CUSTOM VALUES FOR SENSOR 2 */
#define ST_MAGN_2_WAI_EXP 0x3d
#define ST_MAGN_2_ODR_ADDR 0x20
#define ST_MAGN_2_ODR_MASK 0x1c
#define ST_MAGN_2_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_2_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_2_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_2_ODR_AVL_5HZ_VAL 0x03
#define ST_MAGN_2_ODR_AVL_10HZ_VAL 0x04
#define ST_MAGN_2_ODR_AVL_20HZ_VAL 0x05
#define ST_MAGN_2_ODR_AVL_40HZ_VAL 0x06
#define ST_MAGN_2_ODR_AVL_80HZ_VAL 0x07
#define ST_MAGN_2_PW_ADDR 0x22
#define ST_MAGN_2_PW_MASK 0x03
#define ST_MAGN_2_PW_ON 0x00
#define ST_MAGN_2_PW_OFF 0x03
#define ST_MAGN_2_FS_ADDR 0x21
#define ST_MAGN_2_FS_MASK 0x60
#define ST_MAGN_2_FS_AVL_4000_VAL 0x00
#define ST_MAGN_2_FS_AVL_8000_VAL 0x01
#define ST_MAGN_2_FS_AVL_12000_VAL 0x02
#define ST_MAGN_2_FS_AVL_16000_VAL 0x03
#define ST_MAGN_2_FS_AVL_4000_GAIN 146
#define ST_MAGN_2_FS_AVL_8000_GAIN 292
#define ST_MAGN_2_FS_AVL_12000_GAIN 438
#define ST_MAGN_2_FS_AVL_16000_GAIN 584
#define ST_MAGN_2_MULTIREAD_BIT false
#define ST_MAGN_2_OUT_X_L_ADDR 0x28
#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c
/* CUSTOM VALUES FOR SENSOR 3 */
#define ST_MAGN_3_WAI_ADDR 0x4f
#define ST_MAGN_3_WAI_EXP 0x40
#define ST_MAGN_3_ODR_ADDR 0x60
#define ST_MAGN_3_ODR_MASK 0x0c
#define ST_MAGN_3_ODR_AVL_10HZ_VAL 0x00
#define ST_MAGN_3_ODR_AVL_20HZ_VAL 0x01
#define ST_MAGN_3_ODR_AVL_50HZ_VAL 0x02
#define ST_MAGN_3_ODR_AVL_100HZ_VAL 0x03
#define ST_MAGN_3_PW_ADDR 0x60
#define ST_MAGN_3_PW_MASK 0x03
#define ST_MAGN_3_PW_ON 0x00
#define ST_MAGN_3_PW_OFF 0x03
#define ST_MAGN_3_BDU_ADDR 0x62
#define ST_MAGN_3_BDU_MASK 0x10
#define ST_MAGN_3_DRDY_IRQ_ADDR 0x62
#define ST_MAGN_3_DRDY_INT_MASK 0x01
#define ST_MAGN_3_IHL_IRQ_ADDR 0x63
#define ST_MAGN_3_IHL_IRQ_MASK 0x04
#define ST_MAGN_3_FS_AVL_15000_GAIN 1500
#define ST_MAGN_3_MULTIREAD_BIT false
#define ST_MAGN_3_OUT_X_L_ADDR 0x68
#define ST_MAGN_3_OUT_Y_L_ADDR 0x6a
#define ST_MAGN_3_OUT_Z_L_ADDR 0x6c
static const struct iio_chan_spec st_magn_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_X_H_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_Y_H_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_Z_H_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
ST_MAGN_3_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
ST_MAGN_3_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
ST_MAGN_3_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct st_sensor_settings st_magn_sensors_settings[] = {
{
.wai = 0, /* This sensor has no valid WhoAmI report 0 */
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM303DLH_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
.odr = {
.addr = ST_MAGN_0_ODR_ADDR,
.mask = ST_MAGN_0_ODR_MASK,
.odr_avl = {
{ 1, ST_MAGN_0_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_0_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_0_ODR_AVL_3HZ_VAL, },
{ 8, ST_MAGN_0_ODR_AVL_8HZ_VAL, },
{ 15, ST_MAGN_0_ODR_AVL_15HZ_VAL, },
{ 30, ST_MAGN_0_ODR_AVL_30HZ_VAL, },
{ 75, ST_MAGN_0_ODR_AVL_75HZ_VAL, },
},
},
.pw = {
.addr = ST_MAGN_0_PW_ADDR,
.mask = ST_MAGN_0_PW_MASK,
.value_on = ST_MAGN_0_PW_ON,
.value_off = ST_MAGN_0_PW_OFF,
},
.fs = {
.addr = ST_MAGN_0_FS_ADDR,
.mask = ST_MAGN_0_FS_MASK,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_1300MG,
.value = ST_MAGN_0_FS_AVL_1300_VAL,
.gain = ST_MAGN_0_FS_AVL_1300_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_1300_GAIN_Z,
},
[1] = {
.num = ST_MAGN_FS_AVL_1900MG,
.value = ST_MAGN_0_FS_AVL_1900_VAL,
.gain = ST_MAGN_0_FS_AVL_1900_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_1900_GAIN_Z,
},
[2] = {
.num = ST_MAGN_FS_AVL_2500MG,
.value = ST_MAGN_0_FS_AVL_2500_VAL,
.gain = ST_MAGN_0_FS_AVL_2500_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_2500_GAIN_Z,
},
[3] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_0_FS_AVL_4000_VAL,
.gain = ST_MAGN_0_FS_AVL_4000_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_4000_GAIN_Z,
},
[4] = {
.num = ST_MAGN_FS_AVL_4700MG,
.value = ST_MAGN_0_FS_AVL_4700_VAL,
.gain = ST_MAGN_0_FS_AVL_4700_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_4700_GAIN_Z,
},
[5] = {
.num = ST_MAGN_FS_AVL_5600MG,
.value = ST_MAGN_0_FS_AVL_5600_VAL,
.gain = ST_MAGN_0_FS_AVL_5600_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_5600_GAIN_Z,
},
[6] = {
.num = ST_MAGN_FS_AVL_8100MG,
.value = ST_MAGN_0_FS_AVL_8100_VAL,
.gain = ST_MAGN_0_FS_AVL_8100_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_8100_GAIN_Z,
},
},
},
.multi_read_bit = ST_MAGN_0_MULTIREAD_BIT,
.bootime = 2,
},
{
.wai = ST_MAGN_1_WAI_EXP,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM303DLHC_MAGN_DEV_NAME,
[1] = LSM303DLM_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
.odr = {
.addr = ST_MAGN_1_ODR_ADDR,
.mask = ST_MAGN_1_ODR_MASK,
.odr_avl = {
{ 1, ST_MAGN_1_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_1_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_1_ODR_AVL_3HZ_VAL, },
{ 8, ST_MAGN_1_ODR_AVL_8HZ_VAL, },
{ 15, ST_MAGN_1_ODR_AVL_15HZ_VAL, },
{ 30, ST_MAGN_1_ODR_AVL_30HZ_VAL, },
{ 75, ST_MAGN_1_ODR_AVL_75HZ_VAL, },
{ 220, ST_MAGN_1_ODR_AVL_220HZ_VAL, },
},
},
.pw = {
.addr = ST_MAGN_1_PW_ADDR,
.mask = ST_MAGN_1_PW_MASK,
.value_on = ST_MAGN_1_PW_ON,
.value_off = ST_MAGN_1_PW_OFF,
},
.fs = {
.addr = ST_MAGN_1_FS_ADDR,
.mask = ST_MAGN_1_FS_MASK,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_1300MG,
.value = ST_MAGN_1_FS_AVL_1300_VAL,
.gain = ST_MAGN_1_FS_AVL_1300_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_1300_GAIN_Z,
},
[1] = {
.num = ST_MAGN_FS_AVL_1900MG,
.value = ST_MAGN_1_FS_AVL_1900_VAL,
.gain = ST_MAGN_1_FS_AVL_1900_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_1900_GAIN_Z,
},
[2] = {
.num = ST_MAGN_FS_AVL_2500MG,
.value = ST_MAGN_1_FS_AVL_2500_VAL,
.gain = ST_MAGN_1_FS_AVL_2500_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_2500_GAIN_Z,
},
[3] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_1_FS_AVL_4000_VAL,
.gain = ST_MAGN_1_FS_AVL_4000_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_4000_GAIN_Z,
},
[4] = {
.num = ST_MAGN_FS_AVL_4700MG,
.value = ST_MAGN_1_FS_AVL_4700_VAL,
.gain = ST_MAGN_1_FS_AVL_4700_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_4700_GAIN_Z,
},
[5] = {
.num = ST_MAGN_FS_AVL_5600MG,
.value = ST_MAGN_1_FS_AVL_5600_VAL,
.gain = ST_MAGN_1_FS_AVL_5600_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_5600_GAIN_Z,
},
[6] = {
.num = ST_MAGN_FS_AVL_8100MG,
.value = ST_MAGN_1_FS_AVL_8100_VAL,
.gain = ST_MAGN_1_FS_AVL_8100_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_8100_GAIN_Z,
},
},
},
.multi_read_bit = ST_MAGN_1_MULTIREAD_BIT,
.bootime = 2,
},
{
.wai = ST_MAGN_2_WAI_EXP,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3MDL_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
.odr = {
.addr = ST_MAGN_2_ODR_ADDR,
.mask = ST_MAGN_2_ODR_MASK,
.odr_avl = {
{ 1, ST_MAGN_2_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_2_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_2_ODR_AVL_3HZ_VAL, },
{ 5, ST_MAGN_2_ODR_AVL_5HZ_VAL, },
{ 10, ST_MAGN_2_ODR_AVL_10HZ_VAL, },
{ 20, ST_MAGN_2_ODR_AVL_20HZ_VAL, },
{ 40, ST_MAGN_2_ODR_AVL_40HZ_VAL, },
{ 80, ST_MAGN_2_ODR_AVL_80HZ_VAL, },
},
},
.pw = {
.addr = ST_MAGN_2_PW_ADDR,
.mask = ST_MAGN_2_PW_MASK,
.value_on = ST_MAGN_2_PW_ON,
.value_off = ST_MAGN_2_PW_OFF,
},
.fs = {
.addr = ST_MAGN_2_FS_ADDR,
.mask = ST_MAGN_2_FS_MASK,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_2_FS_AVL_4000_VAL,
.gain = ST_MAGN_2_FS_AVL_4000_GAIN,
},
[1] = {
.num = ST_MAGN_FS_AVL_8000MG,
.value = ST_MAGN_2_FS_AVL_8000_VAL,
.gain = ST_MAGN_2_FS_AVL_8000_GAIN,
},
[2] = {
.num = ST_MAGN_FS_AVL_12000MG,
.value = ST_MAGN_2_FS_AVL_12000_VAL,
.gain = ST_MAGN_2_FS_AVL_12000_GAIN,
},
[3] = {
.num = ST_MAGN_FS_AVL_16000MG,
.value = ST_MAGN_2_FS_AVL_16000_VAL,
.gain = ST_MAGN_2_FS_AVL_16000_GAIN,
},
},
},
.multi_read_bit = ST_MAGN_2_MULTIREAD_BIT,
.bootime = 2,
},
{
.wai = ST_MAGN_3_WAI_EXP,
.wai_addr = ST_MAGN_3_WAI_ADDR,
.sensors_supported = {
[0] = LSM303AGR_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
.odr = {
.addr = ST_MAGN_3_ODR_ADDR,
.mask = ST_MAGN_3_ODR_MASK,
.odr_avl = {
{ 10, ST_MAGN_3_ODR_AVL_10HZ_VAL, },
{ 20, ST_MAGN_3_ODR_AVL_20HZ_VAL, },
{ 50, ST_MAGN_3_ODR_AVL_50HZ_VAL, },
{ 100, ST_MAGN_3_ODR_AVL_100HZ_VAL, },
},
},
.pw = {
.addr = ST_MAGN_3_PW_ADDR,
.mask = ST_MAGN_3_PW_MASK,
.value_on = ST_MAGN_3_PW_ON,
.value_off = ST_MAGN_3_PW_OFF,
},
.fs = {
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_15000MG,
.gain = ST_MAGN_3_FS_AVL_15000_GAIN,
},
},
},
.bdu = {
.addr = ST_MAGN_3_BDU_ADDR,
.mask = ST_MAGN_3_BDU_MASK,
},
.drdy_irq = {
.addr = ST_MAGN_3_DRDY_IRQ_ADDR,
.mask_int1 = ST_MAGN_3_DRDY_INT_MASK,
.addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR,
.mask_ihl = ST_MAGN_3_IHL_IRQ_MASK,
},
.multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
.bootime = 2,
},
};
static int st_magn_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *ch, int *val,
int *val2, long mask)
{
int err;
struct st_sensor_data *mdata = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
err = st_sensors_read_info_raw(indio_dev, ch, val);
if (err < 0)
goto read_error;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
if ((ch->scan_index == ST_SENSORS_SCAN_Z) &&
(mdata->current_fullscale->gain2 != 0))
*val2 = mdata->current_fullscale->gain2;
else
*val2 = mdata->current_fullscale->gain;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = mdata->odr;
return IIO_VAL_INT;
default:
return -EINVAL;
}
read_error:
return err;
}
static int st_magn_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
int err;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
if (val2)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
err = st_sensors_set_odr(indio_dev, val);
mutex_unlock(&indio_dev->mlock);
return err;
default:
err = -EINVAL;
}
return err;
}
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);
static struct attribute *st_magn_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_magn_scale_available.dev_attr.attr,
NULL,
};
static const struct attribute_group st_magn_attribute_group = {
.attrs = st_magn_attributes,
};
static const struct iio_info magn_info = {
.driver_module = THIS_MODULE,
.attrs = &st_magn_attribute_group,
.read_raw = &st_magn_read_raw,
.write_raw = &st_magn_write_raw,
.debugfs_reg_access = &st_sensors_debugfs_reg_access,
};
#ifdef CONFIG_IIO_TRIGGER
static const struct iio_trigger_ops st_magn_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
};
#define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
#else
#define ST_MAGN_TRIGGER_OPS NULL
#endif
int st_magn_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
int irq = mdata->get_irq_data_ready(indio_dev);
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &magn_info;
mutex_init(&mdata->tb.buf_lock);
st_sensors_power_enable(indio_dev);
err = st_sensors_check_device_support(indio_dev,
ARRAY_SIZE(st_magn_sensors_settings),
st_magn_sensors_settings);
if (err < 0)
return err;
mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
indio_dev->channels = mdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
&mdata->sensor_settings->fs.fs_avl[0];
mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
err = st_sensors_init_sensor(indio_dev, NULL);
if (err < 0)
return err;
err = st_magn_allocate_ring(indio_dev);
if (err < 0)
return err;
if (irq > 0) {
err = st_sensors_allocate_trigger(indio_dev,
ST_MAGN_TRIGGER_OPS);
if (err < 0)
goto st_magn_probe_trigger_error;
}
err = iio_device_register(indio_dev);
if (err)
goto st_magn_device_register_error;
dev_info(&indio_dev->dev, "registered magnetometer %s\n",
indio_dev->name);
return 0;
st_magn_device_register_error:
if (irq > 0)
st_sensors_deallocate_trigger(indio_dev);
st_magn_probe_trigger_error:
st_magn_deallocate_ring(indio_dev);
return err;
}
EXPORT_SYMBOL(st_magn_common_probe);
void st_magn_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
st_sensors_power_disable(indio_dev);
iio_device_unregister(indio_dev);
if (mdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_magn_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_magn_common_remove);
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink