linux/drivers/spi
Guenter Roeck 58ed90de3e spi/sc18is602: Return -EINVAL for probe failures due to I2C function mismatch
If the I2C bus master driver does not support the required functionality,
the driver returns -ENODEV. This causes a silent probe failure without error
message. Since the device has to be explicitly instantiated, and the user
should know the correct bus, this event really reflects an error condition.
Replace error return value with -EINVAL to trigger an error message showing
that the probe function failed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-23 12:13:54 +01:00
..
Kconfig spi: Master driver for NXP SC18IS602/603 2012-08-22 19:34:51 +01:00
Makefile spi: Master driver for NXP SC18IS602/603 2012-08-22 19:34:51 +01:00
spi-altera.c spi: spi-altera: Use of_match_ptr 2012-08-17 22:56:18 +01:00
spi-ath79.c
spi-atmel.c
spi-au1550.c
spi-bcm63xx.c spi/bcm63xx: fix clock configuration selection 2012-07-23 14:14:11 +01:00
spi-bfin5xx.c
spi-bfin-sport.c
spi-bitbang-txrx.h
spi-bitbang.c
spi-butterfly.c
spi-coldfire-qspi.c
spi-davinci.c
spi-dw-mid.c
spi-dw-mmio.c
spi-dw-pci.c
spi-dw.c
spi-dw.h
spi-ep93xx.c
spi-falcon.c SPI: MIPS: lantiq: add FALCON spi driver 2012-07-23 13:56:30 +01:00
spi-fsl-espi.c
spi-fsl-lib.c
spi-fsl-lib.h
spi-fsl-spi.c
spi-gpio.c spi/gpio: start with CS non-active 2012-07-10 15:28:56 +01:00
spi-imx.c spi/imx: use gpio_is_valid to determine if a gpio is valid 2012-07-13 11:01:46 +01:00
spi-lm70llp.c
spi-mpc52xx-psc.c spi/mpc52xx-psc: Avoid access to freed memory in device remove function 2012-08-22 19:26:36 +01:00
spi-mpc52xx.c spi/mpc52xx: Fix device remove function 2012-08-22 19:26:36 +01:00
spi-mpc512x-psc.c spi/mpc512x-psc: Avoid access to freed memory in device remove function 2012-08-22 19:26:36 +01:00
spi-nuc900.c
spi-oc-tiny.c
spi-omap2-mcspi.c spi: omap2-mcspi: At remove dont use the runtime_autosuspend calls 2012-08-22 17:58:03 +01:00
spi-omap-100k.c
spi-omap-uwire.c
spi-orion.c spi: Refactor spi-orion to use SPI framework queue. 2012-08-17 22:56:18 +01:00
spi-pl022.c spi/pl022: Add devicetree support 2012-08-22 20:00:51 +01:00
spi-ppc4xx.c
spi-pxa2xx-pci.c
spi-pxa2xx.c
spi-rspi.c
spi-s3c24xx-fiq.h
spi-s3c24xx-fiq.S
spi-s3c24xx.c drivers/spi/spi-s3c24xx.c: fix error return code 2012-08-22 17:58:01 +01:00
spi-s3c64xx.c spi/s3c64xx: improve error handling 2012-08-10 12:27:47 +02:00
spi-sc18is602.c spi/sc18is602: Return -EINVAL for probe failures due to I2C function mismatch 2012-08-23 12:13:54 +01:00
spi-sh-hspi.c
spi-sh-msiof.c
spi-sh-sci.c
spi-sh.c
spi-sirf.c
spi-stmp.c
spi-tegra.c spi: Updates for 3.6 2012-07-26 12:57:41 -07:00
spi-ti-ssp.c
spi-tle62x0.c
spi-topcliff-pch.c
spi-txx9.c
spi-xcomm.c spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver 2012-07-20 11:08:44 +01:00
spi-xilinx.c
spi.c
spidev.c