mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-14 04:41:26 +00:00
5ada28bf76
Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
99 lines
4.0 KiB
Plaintext
99 lines
4.0 KiB
Plaintext
|
|
LED handling under Linux
|
|
========================
|
|
|
|
If you're reading this and thinking about keyboard leds, these are
|
|
handled by the input subsystem and the led class is *not* needed.
|
|
|
|
In its simplest form, the LED class just allows control of LEDs from
|
|
userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the
|
|
LED is defined in max_brightness file. The brightness file will set the brightness
|
|
of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware
|
|
brightness support so will just be turned on for non-zero brightness settings.
|
|
|
|
The class also introduces the optional concept of an LED trigger. A trigger
|
|
is a kernel based source of led events. Triggers can either be simple or
|
|
complex. A simple trigger isn't configurable and is designed to slot into
|
|
existing subsystems with minimal additional code. Examples are the ide-disk,
|
|
nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
|
|
optimises away.
|
|
|
|
Complex triggers whilst available to all LEDs have LED specific
|
|
parameters and work on a per LED basis. The timer trigger is an example.
|
|
The timer trigger will periodically change the LED brightness between
|
|
LED_OFF and the current brightness setting. The "on" and "off" time can
|
|
be specified via /sys/class/leds/<device>/delay_{on,off} in milliseconds.
|
|
You can change the brightness value of a LED independently of the timer
|
|
trigger. However, if you set the brightness value to LED_OFF it will
|
|
also disable the timer trigger.
|
|
|
|
You can change triggers in a similar manner to the way an IO scheduler
|
|
is chosen (via /sys/class/leds/<device>/trigger). Trigger specific
|
|
parameters can appear in /sys/class/leds/<device> once a given trigger is
|
|
selected.
|
|
|
|
|
|
Design Philosophy
|
|
=================
|
|
|
|
The underlying design philosophy is simplicity. LEDs are simple devices
|
|
and the aim is to keep a small amount of code giving as much functionality
|
|
as possible. Please keep this in mind when suggesting enhancements.
|
|
|
|
|
|
LED Device Naming
|
|
=================
|
|
|
|
Is currently of the form:
|
|
|
|
"devicename:colour:function"
|
|
|
|
There have been calls for LED properties such as colour to be exported as
|
|
individual led class attributes. As a solution which doesn't incur as much
|
|
overhead, I suggest these become part of the device name. The naming scheme
|
|
above leaves scope for further attributes should they be needed. If sections
|
|
of the name don't apply, just leave that section blank.
|
|
|
|
|
|
Hardware accelerated blink of LEDs
|
|
==================================
|
|
|
|
Some LEDs can be programmed to blink without any CPU interaction. To
|
|
support this feature, a LED driver can optionally implement the
|
|
blink_set() function (see <linux/leds.h>). To set an LED to blinking,
|
|
however, it is better to use use the API function led_blink_set(),
|
|
as it will check and implement software fallback if necessary.
|
|
|
|
To turn off blinking again, use the API function led_brightness_set()
|
|
as that will not just set the LED brightness but also stop any software
|
|
timers that may have been required for blinking.
|
|
|
|
The blink_set() function should choose a user friendly blinking value
|
|
if it is called with *delay_on==0 && *delay_off==0 parameters. In this
|
|
case the driver should give back the chosen value through delay_on and
|
|
delay_off parameters to the leds subsystem.
|
|
|
|
Setting the brightness to zero with brightness_set() callback function
|
|
should completely turn off the LED and cancel the previously programmed
|
|
hardware blinking function, if any.
|
|
|
|
|
|
Known Issues
|
|
============
|
|
|
|
The LED Trigger core cannot be a module as the simple trigger functions
|
|
would cause nightmare dependency issues. I see this as a minor issue
|
|
compared to the benefits the simple trigger functionality brings. The
|
|
rest of the LED subsystem can be modular.
|
|
|
|
|
|
Future Development
|
|
==================
|
|
|
|
At the moment, a trigger can't be created specifically for a single LED.
|
|
There are a number of cases where a trigger might only be mappable to a
|
|
particular LED (ACPI?). The addition of triggers provided by the LED driver
|
|
should cover this option and be possible to add without breaking the
|
|
current interface.
|
|
|