mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 11:55:53 +00:00
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
362 lines
8.7 KiB
C
362 lines
8.7 KiB
C
/*
|
|
* omap_cf.c -- OMAP 16xx CompactFlash controller driver
|
|
*
|
|
* Copyright (c) 2005 David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <pcmcia/ss.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/tc.h>
|
|
|
|
|
|
/* NOTE: don't expect this to support many I/O cards. The 16xx chips have
|
|
* hard-wired timings to support Compact Flash memory cards; they won't work
|
|
* with various other devices (like WLAN adapters) without some external
|
|
* logic to help out.
|
|
*
|
|
* NOTE: CF controller docs disagree with address space docs as to where
|
|
* CF_BASE really lives; this is a doc erratum.
|
|
*/
|
|
#define CF_BASE 0xfffe2800
|
|
|
|
/* status; read after IRQ */
|
|
#define CF_STATUS_REG __REG16(CF_BASE + 0x00)
|
|
# define CF_STATUS_BAD_READ (1 << 2)
|
|
# define CF_STATUS_BAD_WRITE (1 << 1)
|
|
# define CF_STATUS_CARD_DETECT (1 << 0)
|
|
|
|
/* which chipselect (CS0..CS3) is used for CF (active low) */
|
|
#define CF_CFG_REG __REG16(CF_BASE + 0x02)
|
|
|
|
/* card reset */
|
|
#define CF_CONTROL_REG __REG16(CF_BASE + 0x04)
|
|
# define CF_CONTROL_RESET (1 << 0)
|
|
|
|
#define omap_cf_present() (!(CF_STATUS_REG & CF_STATUS_CARD_DETECT))
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static const char driver_name[] = "omap_cf";
|
|
|
|
struct omap_cf_socket {
|
|
struct pcmcia_socket socket;
|
|
|
|
struct timer_list timer;
|
|
unsigned present:1;
|
|
unsigned active:1;
|
|
|
|
struct platform_device *pdev;
|
|
unsigned long phys_cf;
|
|
u_int irq;
|
|
struct resource iomem;
|
|
};
|
|
|
|
#define POLL_INTERVAL (2 * HZ)
|
|
|
|
#define SZ_2K (2 * SZ_1K)
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static int omap_cf_ss_init(struct pcmcia_socket *s)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* the timer is primarily to kick this socket's pccardd */
|
|
static void omap_cf_timer(unsigned long _cf)
|
|
{
|
|
struct omap_cf_socket *cf = (void *) _cf;
|
|
unsigned present = omap_cf_present();
|
|
|
|
if (present != cf->present) {
|
|
cf->present = present;
|
|
pr_debug("%s: card %s\n", driver_name,
|
|
present ? "present" : "gone");
|
|
pcmcia_parse_events(&cf->socket, SS_DETECT);
|
|
}
|
|
|
|
if (cf->active)
|
|
mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
|
|
}
|
|
|
|
/* This irq handler prevents "irqNNN: nobody cared" messages as drivers
|
|
* claim the card's IRQ. It may also detect some card insertions, but
|
|
* not removals; it can't always eliminate timer irqs.
|
|
*/
|
|
static irqreturn_t omap_cf_irq(int irq, void *_cf)
|
|
{
|
|
omap_cf_timer((unsigned long)_cf);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap_cf_get_status(struct pcmcia_socket *s, u_int *sp)
|
|
{
|
|
if (!sp)
|
|
return -EINVAL;
|
|
|
|
/* NOTE CF is always 3VCARD */
|
|
if (omap_cf_present()) {
|
|
struct omap_cf_socket *cf;
|
|
|
|
*sp = SS_READY | SS_DETECT | SS_POWERON | SS_3VCARD;
|
|
cf = container_of(s, struct omap_cf_socket, socket);
|
|
s->irq.AssignedIRQ = 0;
|
|
s->pci_irq = cf->irq;
|
|
} else
|
|
*sp = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
|
|
{
|
|
u16 control;
|
|
|
|
/* REVISIT some non-OSK boards may support power switching */
|
|
switch (s->Vcc) {
|
|
case 0:
|
|
case 33:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
control = CF_CONTROL_REG;
|
|
if (s->flags & SS_RESET)
|
|
CF_CONTROL_REG = CF_CONTROL_RESET;
|
|
else
|
|
CF_CONTROL_REG = 0;
|
|
|
|
pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
|
|
driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_cf_ss_suspend(struct pcmcia_socket *s)
|
|
{
|
|
pr_debug("%s: %s\n", driver_name, __FUNCTION__);
|
|
return omap_cf_set_socket(s, &dead_socket);
|
|
}
|
|
|
|
/* regions are 2K each: mem, attrib, io (and reserved-for-ide) */
|
|
|
|
static int
|
|
omap_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
|
|
{
|
|
struct omap_cf_socket *cf;
|
|
|
|
cf = container_of(s, struct omap_cf_socket, socket);
|
|
io->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT;
|
|
io->start = cf->phys_cf + SZ_4K;
|
|
io->stop = io->start + SZ_2K - 1;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
omap_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
|
|
{
|
|
struct omap_cf_socket *cf;
|
|
|
|
if (map->card_start)
|
|
return -EINVAL;
|
|
cf = container_of(s, struct omap_cf_socket, socket);
|
|
map->static_start = cf->phys_cf;
|
|
map->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT;
|
|
if (map->flags & MAP_ATTRIB)
|
|
map->static_start += SZ_2K;
|
|
return 0;
|
|
}
|
|
|
|
static struct pccard_operations omap_cf_ops = {
|
|
.init = omap_cf_ss_init,
|
|
.suspend = omap_cf_ss_suspend,
|
|
.get_status = omap_cf_get_status,
|
|
.set_socket = omap_cf_set_socket,
|
|
.set_io_map = omap_cf_set_io_map,
|
|
.set_mem_map = omap_cf_set_mem_map,
|
|
};
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* NOTE: right now the only board-specific platform_data is
|
|
* "what chipselect is used". Boards could want more.
|
|
*/
|
|
|
|
static int __devinit omap_cf_probe(struct device *dev)
|
|
{
|
|
unsigned seg;
|
|
struct omap_cf_socket *cf;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
int irq;
|
|
int status;
|
|
|
|
seg = (int) dev->platform_data;
|
|
if (seg == 0 || seg > 3)
|
|
return -ENODEV;
|
|
|
|
/* either CFLASH.IREQ (INT_1610_CF) or some GPIO */
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -EINVAL;
|
|
|
|
cf = kzalloc(sizeof *cf, GFP_KERNEL);
|
|
if (!cf)
|
|
return -ENOMEM;
|
|
init_timer(&cf->timer);
|
|
cf->timer.function = omap_cf_timer;
|
|
cf->timer.data = (unsigned long) cf;
|
|
|
|
cf->pdev = pdev;
|
|
dev_set_drvdata(dev, cf);
|
|
|
|
/* this primarily just shuts up irq handling noise */
|
|
status = request_irq(irq, omap_cf_irq, IRQF_SHARED,
|
|
driver_name, cf);
|
|
if (status < 0)
|
|
goto fail0;
|
|
cf->irq = irq;
|
|
cf->socket.pci_irq = irq;
|
|
|
|
switch (seg) {
|
|
/* NOTE: CS0 could be configured too ... */
|
|
case 1:
|
|
cf->phys_cf = OMAP_CS1_PHYS;
|
|
break;
|
|
case 2:
|
|
cf->phys_cf = OMAP_CS2_PHYS;
|
|
break;
|
|
case 3:
|
|
cf->phys_cf = omap_cs3_phys();
|
|
break;
|
|
default:
|
|
goto fail1;
|
|
}
|
|
cf->iomem.start = cf->phys_cf;
|
|
cf->iomem.end = cf->iomem.end + SZ_8K - 1;
|
|
cf->iomem.flags = IORESOURCE_MEM;
|
|
|
|
/* pcmcia layer only remaps "real" memory */
|
|
cf->socket.io_offset = (unsigned long)
|
|
ioremap(cf->phys_cf + SZ_4K, SZ_2K);
|
|
if (!cf->socket.io_offset)
|
|
goto fail1;
|
|
|
|
if (!request_mem_region(cf->phys_cf, SZ_8K, driver_name))
|
|
goto fail1;
|
|
|
|
/* NOTE: CF conflicts with MMC1 */
|
|
omap_cfg_reg(W11_1610_CF_CD1);
|
|
omap_cfg_reg(P11_1610_CF_CD2);
|
|
omap_cfg_reg(R11_1610_CF_IOIS16);
|
|
omap_cfg_reg(V10_1610_CF_IREQ);
|
|
omap_cfg_reg(W10_1610_CF_RESET);
|
|
|
|
CF_CFG_REG = ~(1 << seg);
|
|
|
|
pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
|
|
|
|
/* NOTE: better EMIFS setup might support more cards; but the
|
|
* TRM only shows how to affect regular flash signals, not their
|
|
* CF/PCMCIA variants...
|
|
*/
|
|
pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
|
|
seg, EMIFS_CCS(seg), EMIFS_ACS(seg));
|
|
EMIFS_CCS(seg) = 0x0004a1b3; /* synch mode 4 etc */
|
|
EMIFS_ACS(seg) = 0x00000000; /* OE hold/setup */
|
|
|
|
/* CF uses armxor_ck, which is "always" available */
|
|
|
|
pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
|
|
CF_STATUS_REG, CF_CFG_REG, CF_CONTROL_REG,
|
|
omap_cf_present() ? "present" : "(not present)");
|
|
|
|
cf->socket.owner = THIS_MODULE;
|
|
cf->socket.dev.dev = dev;
|
|
cf->socket.ops = &omap_cf_ops;
|
|
cf->socket.resource_ops = &pccard_static_ops;
|
|
cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
|
|
| SS_CAP_MEM_ALIGN;
|
|
cf->socket.map_size = SZ_2K;
|
|
cf->socket.io[0].res = &cf->iomem;
|
|
|
|
status = pcmcia_register_socket(&cf->socket);
|
|
if (status < 0)
|
|
goto fail2;
|
|
|
|
cf->active = 1;
|
|
mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
|
|
return 0;
|
|
|
|
fail2:
|
|
release_mem_region(cf->phys_cf, SZ_8K);
|
|
fail1:
|
|
if (cf->socket.io_offset)
|
|
iounmap((void __iomem *) cf->socket.io_offset);
|
|
free_irq(irq, cf);
|
|
fail0:
|
|
kfree(cf);
|
|
return status;
|
|
}
|
|
|
|
static int __devexit omap_cf_remove(struct device *dev)
|
|
{
|
|
struct omap_cf_socket *cf = dev_get_drvdata(dev);
|
|
|
|
cf->active = 0;
|
|
pcmcia_unregister_socket(&cf->socket);
|
|
del_timer_sync(&cf->timer);
|
|
iounmap((void __iomem *) cf->socket.io_offset);
|
|
release_mem_region(cf->phys_cf, SZ_8K);
|
|
free_irq(cf->irq, cf);
|
|
kfree(cf);
|
|
return 0;
|
|
}
|
|
|
|
static struct device_driver omap_cf_driver = {
|
|
.name = (char *) driver_name,
|
|
.bus = &platform_bus_type,
|
|
.probe = omap_cf_probe,
|
|
.remove = __devexit_p(omap_cf_remove),
|
|
.suspend = pcmcia_socket_dev_suspend,
|
|
.resume = pcmcia_socket_dev_resume,
|
|
};
|
|
|
|
static int __init omap_cf_init(void)
|
|
{
|
|
if (cpu_is_omap16xx())
|
|
return driver_register(&omap_cf_driver);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __exit omap_cf_exit(void)
|
|
{
|
|
if (cpu_is_omap16xx())
|
|
driver_unregister(&omap_cf_driver);
|
|
}
|
|
|
|
module_init(omap_cf_init);
|
|
module_exit(omap_cf_exit);
|
|
|
|
MODULE_DESCRIPTION("OMAP CF Driver");
|
|
MODULE_LICENSE("GPL");
|