mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-20 00:11:22 +00:00
5aee87c43e
For Hummingbird PCI controllers, we should create the root PCI memory space resource as the full 4GB area, and then allocate the IOMMU DMA translation window out of there. The old code just assumed that the IOMMU DMA translation base to the top of the 4GB area was unusable. This is not true on many systems such as SB100 and SB150, where the IOMMU DMA translation window sits at 0xc0000000->0xdfffffff. So what would happen is that any device mapped by the firmware at the top section 0xe0000000->0xffffffff would get remapped by Linux somewhere else leading to all kinds of problems and boot failures. While we're here, report more cases of OBP resource assignment conflicts. The only truly valid ones are ROM resource conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
817 lines
21 KiB
C
817 lines
21 KiB
C
/* $Id: pci_common.c,v 1.29 2002/02/01 00:56:03 davem Exp $
|
|
* pci_common.c: PCI controller common support.
|
|
*
|
|
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
|
|
*/
|
|
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/pbm.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/of_device.h>
|
|
|
|
#include "pci_impl.h"
|
|
|
|
/* Fix self device of BUS and hook it into BUS->self.
|
|
* The pci_scan_bus does not do this for the host bridge.
|
|
*/
|
|
void __init pci_fixup_host_bridge_self(struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *pdev;
|
|
|
|
list_for_each_entry(pdev, &pbus->devices, bus_list) {
|
|
if (pdev->class >> 8 == PCI_CLASS_BRIDGE_HOST) {
|
|
pbus->self = pdev;
|
|
return;
|
|
}
|
|
}
|
|
|
|
prom_printf("PCI: Critical error, cannot find host bridge PDEV.\n");
|
|
prom_halt();
|
|
}
|
|
|
|
/* Find the OBP PROM device tree node for a PCI device. */
|
|
static struct device_node * __init
|
|
find_device_prom_node(struct pci_pbm_info *pbm, struct pci_dev *pdev,
|
|
struct device_node *bus_node,
|
|
struct linux_prom_pci_registers **pregs,
|
|
int *nregs)
|
|
{
|
|
struct device_node *dp;
|
|
|
|
*nregs = 0;
|
|
|
|
/*
|
|
* Return the PBM's PROM node in case we are it's PCI device,
|
|
* as the PBM's reg property is different to standard PCI reg
|
|
* properties. We would delete this device entry otherwise,
|
|
* which confuses XFree86's device probing...
|
|
*/
|
|
if ((pdev->bus->number == pbm->pci_bus->number) && (pdev->devfn == 0) &&
|
|
(pdev->vendor == PCI_VENDOR_ID_SUN) &&
|
|
(pdev->device == PCI_DEVICE_ID_SUN_PBM ||
|
|
pdev->device == PCI_DEVICE_ID_SUN_SCHIZO ||
|
|
pdev->device == PCI_DEVICE_ID_SUN_TOMATILLO ||
|
|
pdev->device == PCI_DEVICE_ID_SUN_SABRE ||
|
|
pdev->device == PCI_DEVICE_ID_SUN_HUMMINGBIRD))
|
|
return bus_node;
|
|
|
|
dp = bus_node->child;
|
|
while (dp) {
|
|
struct linux_prom_pci_registers *regs;
|
|
struct property *prop;
|
|
int len;
|
|
|
|
prop = of_find_property(dp, "reg", &len);
|
|
if (!prop)
|
|
goto do_next_sibling;
|
|
|
|
regs = prop->value;
|
|
if (((regs[0].phys_hi >> 8) & 0xff) == pdev->devfn) {
|
|
*pregs = regs;
|
|
*nregs = len / sizeof(struct linux_prom_pci_registers);
|
|
return dp;
|
|
}
|
|
|
|
do_next_sibling:
|
|
dp = dp->sibling;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* Older versions of OBP on PCI systems encode 64-bit MEM
|
|
* space assignments incorrectly, this fixes them up. We also
|
|
* take the opportunity here to hide other kinds of bogus
|
|
* assignments.
|
|
*/
|
|
static void __init fixup_obp_assignments(struct pci_dev *pdev,
|
|
struct pcidev_cookie *pcp)
|
|
{
|
|
int i;
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_AL &&
|
|
(pdev->device == PCI_DEVICE_ID_AL_M7101 ||
|
|
pdev->device == PCI_DEVICE_ID_AL_M1533)) {
|
|
int i;
|
|
|
|
/* Zap all of the normal resources, they are
|
|
* meaningless and generate bogus resource collision
|
|
* messages. This is OpenBoot's ill-fated attempt to
|
|
* represent the implicit resources that these devices
|
|
* have.
|
|
*/
|
|
pcp->num_prom_assignments = 0;
|
|
for (i = 0; i < 6; i++) {
|
|
pdev->resource[i].start =
|
|
pdev->resource[i].end =
|
|
pdev->resource[i].flags = 0;
|
|
}
|
|
pdev->resource[PCI_ROM_RESOURCE].start =
|
|
pdev->resource[PCI_ROM_RESOURCE].end =
|
|
pdev->resource[PCI_ROM_RESOURCE].flags = 0;
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < pcp->num_prom_assignments; i++) {
|
|
struct linux_prom_pci_registers *ap;
|
|
int space;
|
|
|
|
ap = &pcp->prom_assignments[i];
|
|
space = ap->phys_hi >> 24;
|
|
if ((space & 0x3) == 2 &&
|
|
(space & 0x4) != 0) {
|
|
ap->phys_hi &= ~(0x7 << 24);
|
|
ap->phys_hi |= 0x3 << 24;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Fill in the PCI device cookie sysdata for the given
|
|
* PCI device. This cookie is the means by which one
|
|
* can get to OBP and PCI controller specific information
|
|
* for a PCI device.
|
|
*/
|
|
static void __init pdev_cookie_fillin(struct pci_pbm_info *pbm,
|
|
struct pci_dev *pdev,
|
|
struct device_node *bus_node)
|
|
{
|
|
struct linux_prom_pci_registers *pregs = NULL;
|
|
struct pcidev_cookie *pcp;
|
|
struct device_node *dp;
|
|
struct property *prop;
|
|
int nregs, len;
|
|
|
|
dp = find_device_prom_node(pbm, pdev, bus_node,
|
|
&pregs, &nregs);
|
|
if (!dp) {
|
|
/* If it is not in the OBP device tree then
|
|
* there must be a damn good reason for it.
|
|
*
|
|
* So what we do is delete the device from the
|
|
* PCI device tree completely. This scenario
|
|
* is seen, for example, on CP1500 for the
|
|
* second EBUS/HappyMeal pair if the external
|
|
* connector for it is not present.
|
|
*/
|
|
pci_remove_bus_device(pdev);
|
|
return;
|
|
}
|
|
|
|
pcp = kzalloc(sizeof(*pcp), GFP_ATOMIC);
|
|
if (pcp == NULL) {
|
|
prom_printf("PCI_COOKIE: Fatal malloc error, aborting...\n");
|
|
prom_halt();
|
|
}
|
|
pcp->pbm = pbm;
|
|
pcp->prom_node = dp;
|
|
pcp->op = of_find_device_by_node(dp);
|
|
memcpy(pcp->prom_regs, pregs,
|
|
nregs * sizeof(struct linux_prom_pci_registers));
|
|
pcp->num_prom_regs = nregs;
|
|
|
|
/* We can't have the pcidev_cookie assignments be just
|
|
* direct pointers into the property value, since they
|
|
* are potentially modified by the probing process.
|
|
*/
|
|
prop = of_find_property(dp, "assigned-addresses", &len);
|
|
if (!prop) {
|
|
pcp->num_prom_assignments = 0;
|
|
} else {
|
|
memcpy(pcp->prom_assignments, prop->value, len);
|
|
pcp->num_prom_assignments =
|
|
(len / sizeof(pcp->prom_assignments[0]));
|
|
}
|
|
|
|
if (strcmp(dp->name, "ebus") == 0) {
|
|
struct linux_prom_ebus_ranges *erng;
|
|
int iter;
|
|
|
|
/* EBUS is special... */
|
|
prop = of_find_property(dp, "ranges", &len);
|
|
if (!prop) {
|
|
prom_printf("EBUS: Fatal error, no range property\n");
|
|
prom_halt();
|
|
}
|
|
erng = prop->value;
|
|
len = (len / sizeof(erng[0]));
|
|
for (iter = 0; iter < len; iter++) {
|
|
struct linux_prom_ebus_ranges *ep = &erng[iter];
|
|
struct linux_prom_pci_registers *ap;
|
|
|
|
ap = &pcp->prom_assignments[iter];
|
|
|
|
ap->phys_hi = ep->parent_phys_hi;
|
|
ap->phys_mid = ep->parent_phys_mid;
|
|
ap->phys_lo = ep->parent_phys_lo;
|
|
ap->size_hi = 0;
|
|
ap->size_lo = ep->size;
|
|
}
|
|
pcp->num_prom_assignments = len;
|
|
}
|
|
|
|
fixup_obp_assignments(pdev, pcp);
|
|
|
|
pdev->sysdata = pcp;
|
|
}
|
|
|
|
void __init pci_fill_in_pbm_cookies(struct pci_bus *pbus,
|
|
struct pci_pbm_info *pbm,
|
|
struct device_node *dp)
|
|
{
|
|
struct pci_dev *pdev, *pdev_next;
|
|
struct pci_bus *this_pbus, *pbus_next;
|
|
|
|
/* This must be _safe because the cookie fillin
|
|
routine can delete devices from the tree. */
|
|
list_for_each_entry_safe(pdev, pdev_next, &pbus->devices, bus_list)
|
|
pdev_cookie_fillin(pbm, pdev, dp);
|
|
|
|
list_for_each_entry_safe(this_pbus, pbus_next, &pbus->children, node) {
|
|
struct pcidev_cookie *pcp = this_pbus->self->sysdata;
|
|
|
|
pci_fill_in_pbm_cookies(this_pbus, pbm, pcp->prom_node);
|
|
}
|
|
}
|
|
|
|
static void __init bad_assignment(struct pci_dev *pdev,
|
|
struct linux_prom_pci_registers *ap,
|
|
struct resource *res,
|
|
int do_prom_halt)
|
|
{
|
|
prom_printf("PCI: Bogus PROM assignment. BUS[%02x] DEVFN[%x]\n",
|
|
pdev->bus->number, pdev->devfn);
|
|
if (ap)
|
|
prom_printf("PCI: phys[%08x:%08x:%08x] size[%08x:%08x]\n",
|
|
ap->phys_hi, ap->phys_mid, ap->phys_lo,
|
|
ap->size_hi, ap->size_lo);
|
|
if (res)
|
|
prom_printf("PCI: RES[%016lx-->%016lx:(%lx)]\n",
|
|
res->start, res->end, res->flags);
|
|
if (do_prom_halt)
|
|
prom_halt();
|
|
}
|
|
|
|
static struct resource *
|
|
__init get_root_resource(struct linux_prom_pci_registers *ap,
|
|
struct pci_pbm_info *pbm)
|
|
{
|
|
int space = (ap->phys_hi >> 24) & 3;
|
|
|
|
switch (space) {
|
|
case 0:
|
|
/* Configuration space, silently ignore it. */
|
|
return NULL;
|
|
|
|
case 1:
|
|
/* 16-bit IO space */
|
|
return &pbm->io_space;
|
|
|
|
case 2:
|
|
/* 32-bit MEM space */
|
|
return &pbm->mem_space;
|
|
|
|
case 3:
|
|
/* 64-bit MEM space, these are allocated out of
|
|
* the 32-bit mem_space range for the PBM, ie.
|
|
* we just zero out the upper 32-bits.
|
|
*/
|
|
return &pbm->mem_space;
|
|
|
|
default:
|
|
printk("PCI: What is resource space %x?\n", space);
|
|
return NULL;
|
|
};
|
|
}
|
|
|
|
static struct resource *
|
|
__init get_device_resource(struct linux_prom_pci_registers *ap,
|
|
struct pci_dev *pdev)
|
|
{
|
|
struct resource *res;
|
|
int breg = (ap->phys_hi & 0xff);
|
|
|
|
switch (breg) {
|
|
case PCI_ROM_ADDRESS:
|
|
/* Unfortunately I have seen several cases where
|
|
* buggy FCODE uses a space value of '1' (I/O space)
|
|
* in the register property for the ROM address
|
|
* so disable this sanity check for now.
|
|
*/
|
|
#if 0
|
|
{
|
|
int space = (ap->phys_hi >> 24) & 3;
|
|
|
|
/* It had better be MEM space. */
|
|
if (space != 2)
|
|
bad_assignment(pdev, ap, NULL, 0);
|
|
}
|
|
#endif
|
|
res = &pdev->resource[PCI_ROM_RESOURCE];
|
|
break;
|
|
|
|
case PCI_BASE_ADDRESS_0:
|
|
case PCI_BASE_ADDRESS_1:
|
|
case PCI_BASE_ADDRESS_2:
|
|
case PCI_BASE_ADDRESS_3:
|
|
case PCI_BASE_ADDRESS_4:
|
|
case PCI_BASE_ADDRESS_5:
|
|
res = &pdev->resource[(breg - PCI_BASE_ADDRESS_0) / 4];
|
|
break;
|
|
|
|
default:
|
|
bad_assignment(pdev, ap, NULL, 0);
|
|
res = NULL;
|
|
break;
|
|
};
|
|
|
|
return res;
|
|
}
|
|
|
|
static void __init pdev_record_assignments(struct pci_pbm_info *pbm,
|
|
struct pci_dev *pdev)
|
|
{
|
|
struct pcidev_cookie *pcp = pdev->sysdata;
|
|
int i;
|
|
|
|
for (i = 0; i < pcp->num_prom_assignments; i++) {
|
|
struct linux_prom_pci_registers *ap;
|
|
struct resource *root, *res;
|
|
|
|
/* The format of this property is specified in
|
|
* the PCI Bus Binding to IEEE1275-1994.
|
|
*/
|
|
ap = &pcp->prom_assignments[i];
|
|
root = get_root_resource(ap, pbm);
|
|
res = get_device_resource(ap, pdev);
|
|
if (root == NULL || res == NULL ||
|
|
res->flags == 0)
|
|
continue;
|
|
|
|
/* Ok we know which resource this PROM assignment is
|
|
* for, sanity check it.
|
|
*/
|
|
if ((res->start & 0xffffffffUL) != ap->phys_lo)
|
|
bad_assignment(pdev, ap, res, 1);
|
|
|
|
/* If it is a 64-bit MEM space assignment, verify that
|
|
* the resource is too and that the upper 32-bits match.
|
|
*/
|
|
if (((ap->phys_hi >> 24) & 3) == 3) {
|
|
if (((res->flags & IORESOURCE_MEM) == 0) ||
|
|
((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
|
|
!= PCI_BASE_ADDRESS_MEM_TYPE_64))
|
|
bad_assignment(pdev, ap, res, 1);
|
|
if ((res->start >> 32) != ap->phys_mid)
|
|
bad_assignment(pdev, ap, res, 1);
|
|
|
|
/* PBM cannot generate cpu initiated PIOs
|
|
* to the full 64-bit space. Therefore the
|
|
* upper 32-bits better be zero. If it is
|
|
* not, just skip it and we will assign it
|
|
* properly ourselves.
|
|
*/
|
|
if ((res->start >> 32) != 0UL) {
|
|
printk(KERN_ERR "PCI: OBP assigns out of range MEM address "
|
|
"%016lx for region %ld on device %s\n",
|
|
res->start, (res - &pdev->resource[0]), pci_name(pdev));
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* Adjust the resource into the physical address space
|
|
* of this PBM.
|
|
*/
|
|
pbm->parent->resource_adjust(pdev, res, root);
|
|
|
|
if (request_resource(root, res) < 0) {
|
|
int rnum;
|
|
|
|
/* OK, there is some conflict. But this is fine
|
|
* since we'll reassign it in the fixup pass.
|
|
*
|
|
* Do not print the warning for ROM resources
|
|
* as such a conflict is quite common and
|
|
* harmless as the ROM bar is disabled.
|
|
*/
|
|
rnum = (res - &pdev->resource[0]);
|
|
if (rnum != PCI_ROM_RESOURCE)
|
|
printk(KERN_ERR "PCI: Resource collision, "
|
|
"region %d "
|
|
"[%016lx:%016lx] of device %s\n",
|
|
rnum,
|
|
res->start, res->end,
|
|
pci_name(pdev));
|
|
}
|
|
}
|
|
}
|
|
|
|
void __init pci_record_assignments(struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *bus;
|
|
|
|
list_for_each_entry(dev, &pbus->devices, bus_list)
|
|
pdev_record_assignments(pbm, dev);
|
|
|
|
list_for_each_entry(bus, &pbus->children, node)
|
|
pci_record_assignments(pbm, bus);
|
|
}
|
|
|
|
/* Return non-zero if PDEV has implicit I/O resources even
|
|
* though it may not have an I/O base address register
|
|
* active.
|
|
*/
|
|
static int __init has_implicit_io(struct pci_dev *pdev)
|
|
{
|
|
int class = pdev->class >> 8;
|
|
|
|
if (class == PCI_CLASS_NOT_DEFINED ||
|
|
class == PCI_CLASS_NOT_DEFINED_VGA ||
|
|
class == PCI_CLASS_STORAGE_IDE ||
|
|
(pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init pdev_assign_unassigned(struct pci_pbm_info *pbm,
|
|
struct pci_dev *pdev)
|
|
{
|
|
u32 reg;
|
|
u16 cmd;
|
|
int i, io_seen, mem_seen;
|
|
|
|
io_seen = mem_seen = 0;
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
struct resource *root, *res;
|
|
unsigned long size, min, max, align;
|
|
|
|
res = &pdev->resource[i];
|
|
|
|
if (res->flags & IORESOURCE_IO)
|
|
io_seen++;
|
|
else if (res->flags & IORESOURCE_MEM)
|
|
mem_seen++;
|
|
|
|
/* If it is already assigned or the resource does
|
|
* not exist, there is nothing to do.
|
|
*/
|
|
if (res->parent != NULL || res->flags == 0UL)
|
|
continue;
|
|
|
|
/* Determine the root we allocate from. */
|
|
if (res->flags & IORESOURCE_IO) {
|
|
root = &pbm->io_space;
|
|
min = root->start + 0x400UL;
|
|
max = root->end;
|
|
} else {
|
|
root = &pbm->mem_space;
|
|
min = root->start;
|
|
max = min + 0x80000000UL;
|
|
}
|
|
|
|
size = res->end - res->start;
|
|
align = size + 1;
|
|
if (allocate_resource(root, res, size + 1, min, max, align, NULL, NULL) < 0) {
|
|
/* uh oh */
|
|
prom_printf("PCI: Failed to allocate resource %d for %s\n",
|
|
i, pci_name(pdev));
|
|
prom_halt();
|
|
}
|
|
|
|
/* Update PCI config space. */
|
|
pbm->parent->base_address_update(pdev, i);
|
|
}
|
|
|
|
/* Special case, disable the ROM. Several devices
|
|
* act funny (ie. do not respond to memory space writes)
|
|
* when it is left enabled. A good example are Qlogic,ISP
|
|
* adapters.
|
|
*/
|
|
pci_read_config_dword(pdev, PCI_ROM_ADDRESS, ®);
|
|
reg &= ~PCI_ROM_ADDRESS_ENABLE;
|
|
pci_write_config_dword(pdev, PCI_ROM_ADDRESS, reg);
|
|
|
|
/* If we saw I/O or MEM resources, enable appropriate
|
|
* bits in PCI command register.
|
|
*/
|
|
if (io_seen || mem_seen) {
|
|
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
|
|
if (io_seen || has_implicit_io(pdev))
|
|
cmd |= PCI_COMMAND_IO;
|
|
if (mem_seen)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
pci_write_config_word(pdev, PCI_COMMAND, cmd);
|
|
}
|
|
|
|
/* If this is a PCI bridge or an IDE controller,
|
|
* enable bus mastering. In the former case also
|
|
* set the cache line size correctly.
|
|
*/
|
|
if (((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) ||
|
|
(((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) &&
|
|
((pdev->class & 0x80) != 0))) {
|
|
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
|
|
cmd |= PCI_COMMAND_MASTER;
|
|
pci_write_config_word(pdev, PCI_COMMAND, cmd);
|
|
|
|
if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
|
|
pci_write_config_byte(pdev,
|
|
PCI_CACHE_LINE_SIZE,
|
|
(64 / sizeof(u32)));
|
|
}
|
|
}
|
|
|
|
void __init pci_assign_unassigned(struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *bus;
|
|
|
|
list_for_each_entry(dev, &pbus->devices, bus_list)
|
|
pdev_assign_unassigned(pbm, dev);
|
|
|
|
list_for_each_entry(bus, &pbus->children, node)
|
|
pci_assign_unassigned(pbm, bus);
|
|
}
|
|
|
|
static void __init pdev_fixup_irq(struct pci_dev *pdev)
|
|
{
|
|
struct pcidev_cookie *pcp = pdev->sysdata;
|
|
struct of_device *op = pcp->op;
|
|
|
|
if (op->irqs[0] == 0xffffffff) {
|
|
pdev->irq = PCI_IRQ_NONE;
|
|
return;
|
|
}
|
|
|
|
pdev->irq = op->irqs[0];
|
|
|
|
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE,
|
|
pdev->irq & PCI_IRQ_INO);
|
|
}
|
|
|
|
void __init pci_fixup_irq(struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *bus;
|
|
|
|
list_for_each_entry(dev, &pbus->devices, bus_list)
|
|
pdev_fixup_irq(dev);
|
|
|
|
list_for_each_entry(bus, &pbus->children, node)
|
|
pci_fixup_irq(pbm, bus);
|
|
}
|
|
|
|
static void pdev_setup_busmastering(struct pci_dev *pdev, int is_66mhz)
|
|
{
|
|
u16 cmd;
|
|
u8 hdr_type, min_gnt, ltimer;
|
|
|
|
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
|
|
cmd |= PCI_COMMAND_MASTER;
|
|
pci_write_config_word(pdev, PCI_COMMAND, cmd);
|
|
|
|
/* Read it back, if the mastering bit did not
|
|
* get set, the device does not support bus
|
|
* mastering so we have nothing to do here.
|
|
*/
|
|
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
|
|
if ((cmd & PCI_COMMAND_MASTER) == 0)
|
|
return;
|
|
|
|
/* Set correct cache line size, 64-byte on all
|
|
* Sparc64 PCI systems. Note that the value is
|
|
* measured in 32-bit words.
|
|
*/
|
|
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
|
|
64 / sizeof(u32));
|
|
|
|
pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr_type);
|
|
hdr_type &= ~0x80;
|
|
if (hdr_type != PCI_HEADER_TYPE_NORMAL)
|
|
return;
|
|
|
|
/* If the latency timer is already programmed with a non-zero
|
|
* value, assume whoever set it (OBP or whoever) knows what
|
|
* they are doing.
|
|
*/
|
|
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, <imer);
|
|
if (ltimer != 0)
|
|
return;
|
|
|
|
/* XXX Since I'm tipping off the min grant value to
|
|
* XXX choose a suitable latency timer value, I also
|
|
* XXX considered making use of the max latency value
|
|
* XXX as well. Unfortunately I've seen too many bogusly
|
|
* XXX low settings for it to the point where it lacks
|
|
* XXX any usefulness. In one case, an ethernet card
|
|
* XXX claimed a min grant of 10 and a max latency of 5.
|
|
* XXX Now, if I had two such cards on the same bus I
|
|
* XXX could not set the desired burst period (calculated
|
|
* XXX from min grant) without violating the max latency
|
|
* XXX bound. Duh...
|
|
* XXX
|
|
* XXX I blame dumb PC bios implementors for stuff like
|
|
* XXX this, most of them don't even try to do something
|
|
* XXX sensible with latency timer values and just set some
|
|
* XXX default value (usually 32) into every device.
|
|
*/
|
|
|
|
pci_read_config_byte(pdev, PCI_MIN_GNT, &min_gnt);
|
|
|
|
if (min_gnt == 0) {
|
|
/* If no min_gnt setting then use a default
|
|
* value.
|
|
*/
|
|
if (is_66mhz)
|
|
ltimer = 16;
|
|
else
|
|
ltimer = 32;
|
|
} else {
|
|
int shift_factor;
|
|
|
|
if (is_66mhz)
|
|
shift_factor = 2;
|
|
else
|
|
shift_factor = 3;
|
|
|
|
/* Use a default value when the min_gnt value
|
|
* is erroneously high.
|
|
*/
|
|
if (((unsigned int) min_gnt << shift_factor) > 512 ||
|
|
((min_gnt << shift_factor) & 0xff) == 0) {
|
|
ltimer = 8 << shift_factor;
|
|
} else {
|
|
ltimer = min_gnt << shift_factor;
|
|
}
|
|
}
|
|
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, ltimer);
|
|
}
|
|
|
|
void pci_determine_66mhz_disposition(struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *pdev;
|
|
int all_are_66mhz;
|
|
u16 status;
|
|
|
|
if (pbm->is_66mhz_capable == 0) {
|
|
all_are_66mhz = 0;
|
|
goto out;
|
|
}
|
|
|
|
all_are_66mhz = 1;
|
|
list_for_each_entry(pdev, &pbus->devices, bus_list) {
|
|
pci_read_config_word(pdev, PCI_STATUS, &status);
|
|
if (!(status & PCI_STATUS_66MHZ)) {
|
|
all_are_66mhz = 0;
|
|
break;
|
|
}
|
|
}
|
|
out:
|
|
pbm->all_devs_66mhz = all_are_66mhz;
|
|
|
|
printk("PCI%d(PBM%c): Bus running at %dMHz\n",
|
|
pbm->parent->index,
|
|
(pbm == &pbm->parent->pbm_A) ? 'A' : 'B',
|
|
(all_are_66mhz ? 66 : 33));
|
|
}
|
|
|
|
void pci_setup_busmastering(struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *bus;
|
|
int is_66mhz;
|
|
|
|
is_66mhz = pbm->is_66mhz_capable && pbm->all_devs_66mhz;
|
|
|
|
list_for_each_entry(dev, &pbus->devices, bus_list)
|
|
pdev_setup_busmastering(dev, is_66mhz);
|
|
|
|
list_for_each_entry(bus, &pbus->children, node)
|
|
pci_setup_busmastering(pbm, bus);
|
|
}
|
|
|
|
void pci_register_legacy_regions(struct resource *io_res,
|
|
struct resource *mem_res)
|
|
{
|
|
struct resource *p;
|
|
|
|
/* VGA Video RAM. */
|
|
p = kzalloc(sizeof(*p), GFP_KERNEL);
|
|
if (!p)
|
|
return;
|
|
|
|
p->name = "Video RAM area";
|
|
p->start = mem_res->start + 0xa0000UL;
|
|
p->end = p->start + 0x1ffffUL;
|
|
p->flags = IORESOURCE_BUSY;
|
|
request_resource(mem_res, p);
|
|
|
|
p = kzalloc(sizeof(*p), GFP_KERNEL);
|
|
if (!p)
|
|
return;
|
|
|
|
p->name = "System ROM";
|
|
p->start = mem_res->start + 0xf0000UL;
|
|
p->end = p->start + 0xffffUL;
|
|
p->flags = IORESOURCE_BUSY;
|
|
request_resource(mem_res, p);
|
|
|
|
p = kzalloc(sizeof(*p), GFP_KERNEL);
|
|
if (!p)
|
|
return;
|
|
|
|
p->name = "Video ROM";
|
|
p->start = mem_res->start + 0xc0000UL;
|
|
p->end = p->start + 0x7fffUL;
|
|
p->flags = IORESOURCE_BUSY;
|
|
request_resource(mem_res, p);
|
|
}
|
|
|
|
/* Generic helper routines for PCI error reporting. */
|
|
void pci_scan_for_target_abort(struct pci_controller_info *p,
|
|
struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *pdev;
|
|
struct pci_bus *bus;
|
|
|
|
list_for_each_entry(pdev, &pbus->devices, bus_list) {
|
|
u16 status, error_bits;
|
|
|
|
pci_read_config_word(pdev, PCI_STATUS, &status);
|
|
error_bits =
|
|
(status & (PCI_STATUS_SIG_TARGET_ABORT |
|
|
PCI_STATUS_REC_TARGET_ABORT));
|
|
if (error_bits) {
|
|
pci_write_config_word(pdev, PCI_STATUS, error_bits);
|
|
printk("PCI%d(PBM%c): Device [%s] saw Target Abort [%016x]\n",
|
|
p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'),
|
|
pci_name(pdev), status);
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(bus, &pbus->children, node)
|
|
pci_scan_for_target_abort(p, pbm, bus);
|
|
}
|
|
|
|
void pci_scan_for_master_abort(struct pci_controller_info *p,
|
|
struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *pdev;
|
|
struct pci_bus *bus;
|
|
|
|
list_for_each_entry(pdev, &pbus->devices, bus_list) {
|
|
u16 status, error_bits;
|
|
|
|
pci_read_config_word(pdev, PCI_STATUS, &status);
|
|
error_bits =
|
|
(status & (PCI_STATUS_REC_MASTER_ABORT));
|
|
if (error_bits) {
|
|
pci_write_config_word(pdev, PCI_STATUS, error_bits);
|
|
printk("PCI%d(PBM%c): Device [%s] received Master Abort [%016x]\n",
|
|
p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'),
|
|
pci_name(pdev), status);
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(bus, &pbus->children, node)
|
|
pci_scan_for_master_abort(p, pbm, bus);
|
|
}
|
|
|
|
void pci_scan_for_parity_error(struct pci_controller_info *p,
|
|
struct pci_pbm_info *pbm,
|
|
struct pci_bus *pbus)
|
|
{
|
|
struct pci_dev *pdev;
|
|
struct pci_bus *bus;
|
|
|
|
list_for_each_entry(pdev, &pbus->devices, bus_list) {
|
|
u16 status, error_bits;
|
|
|
|
pci_read_config_word(pdev, PCI_STATUS, &status);
|
|
error_bits =
|
|
(status & (PCI_STATUS_PARITY |
|
|
PCI_STATUS_DETECTED_PARITY));
|
|
if (error_bits) {
|
|
pci_write_config_word(pdev, PCI_STATUS, error_bits);
|
|
printk("PCI%d(PBM%c): Device [%s] saw Parity Error [%016x]\n",
|
|
p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'),
|
|
pci_name(pdev), status);
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(bus, &pbus->children, node)
|
|
pci_scan_for_parity_error(p, pbm, bus);
|
|
}
|