mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-30 05:15:03 +00:00
61e115a56d
SSB is an SoC bus used in a number of embedded devices. The most well-known of these devices is probably the Linksys WRT54G, but there are others as well. The bus is also used internally on the BCM43xx and BCM44xx devices from Broadcom. This patch also includes support for SSB ID tables in modules, so that SSB drivers can be loaded automatically. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
130 lines
3.3 KiB
C
130 lines
3.3 KiB
C
/*
|
|
* Sonics Silicon Backplane
|
|
* Broadcom EXTIF core driver
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
|
|
* Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_reg.h>
|
|
|
|
#include "ssb_private.h"
|
|
|
|
|
|
static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
|
|
{
|
|
return ssb_read32(extif->dev, offset);
|
|
}
|
|
|
|
static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
|
|
{
|
|
ssb_write32(extif->dev, offset, value);
|
|
}
|
|
|
|
static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
|
|
u32 mask, u32 value)
|
|
{
|
|
value &= mask;
|
|
value |= extif_read32(extif, offset) & ~mask;
|
|
extif_write32(extif, offset, value);
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_SERIAL
|
|
static bool serial_exists(u8 *regs)
|
|
{
|
|
u8 save_mcr, msr = 0;
|
|
|
|
if (regs) {
|
|
save_mcr = regs[UART_MCR];
|
|
regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
|
|
msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI
|
|
| UART_MSR_CTS | UART_MSR_DSR);
|
|
regs[UART_MCR] = save_mcr;
|
|
}
|
|
return (msr == (UART_MSR_DCD | UART_MSR_CTS));
|
|
}
|
|
|
|
int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports)
|
|
{
|
|
u32 i, nr_ports = 0;
|
|
|
|
/* Disable GPIO interrupt initially */
|
|
extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);
|
|
extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0);
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
void __iomem *uart_regs;
|
|
|
|
uart_regs = ioremap_nocache(SSB_EUART, 16);
|
|
if (uart_regs) {
|
|
uart_regs += (i * 8);
|
|
|
|
if (serial_exists(uart_regs) && ports) {
|
|
extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2);
|
|
|
|
nr_ports++;
|
|
ports[i].regs = uart_regs;
|
|
ports[i].irq = 2;
|
|
ports[i].baud_base = 13500000;
|
|
ports[i].reg_shift = 0;
|
|
}
|
|
iounmap(uart_regs);
|
|
}
|
|
}
|
|
return nr_ports;
|
|
}
|
|
#endif /* CONFIG_SSB_SERIAL */
|
|
|
|
void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Initialize extif so we can get to the LEDs and external UART */
|
|
extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
|
|
|
|
/* Set timing for the flash */
|
|
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
|
tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
|
|
tmp |= DIV_ROUND_UP(120, ns);
|
|
extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
|
|
|
|
/* Set programmable interface timing for external uart */
|
|
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
|
tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
|
|
tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
|
|
tmp |= DIV_ROUND_UP(120, ns);
|
|
extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
|
|
}
|
|
|
|
void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
|
|
u32 *pll_type, u32 *n, u32 *m)
|
|
{
|
|
*pll_type = SSB_PLLTYPE_1;
|
|
*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
|
|
*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
|
|
}
|
|
|
|
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
|
|
{
|
|
return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
|
|
}
|
|
|
|
void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
|
|
{
|
|
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
|
|
mask, value);
|
|
}
|
|
|
|
void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
|
|
{
|
|
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
|
|
mask, value);
|
|
}
|
|
|