mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 09:22:37 +00:00
5decdd2729
This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar as used in MSI Megasky GL861. Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is also supported by hw but I cannot test it due to lack of USB 1.1 port. Device supports only isochronous mode transfers. There is also eeprom in usb controller(at least in address range 0x80 - 0xbf) for storing data, eg. firmware. Anyway, firmware loading is not used / required by the device. There seems to be at least one unknown I2C device in address 0xa0, probably remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07 from this unknown address. Driver is based on gl861 module. Tuner has a lot of problems to lock with megasky qt1010 module with this hardware with some broadcasting standards. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
20 lines
424 B
C
20 lines
424 B
C
#ifndef _DVB_USB_AU6610_H_
|
|
#define _DVB_USB_AU6610_H_
|
|
|
|
#define DVB_USB_LOG_PREFIX "au6610"
|
|
#include "dvb-usb.h"
|
|
|
|
#define deb_rc(args...) dprintk(dvb_usb_au6610_debug,0x01,args)
|
|
|
|
#define AU6610_REQ_I2C_WRITE 0x14
|
|
#define AU6610_REQ_I2C_READ 0x13
|
|
#define AU6610_REQ_USB_WRITE 0x16
|
|
#define AU6610_REQ_USB_READ 0x15
|
|
|
|
#define AU6610_USB_TIMEOUT 1000
|
|
|
|
#define AU6610_ALTSETTING_COUNT 6
|
|
#define AU6610_ALTSETTING 5
|
|
|
|
#endif
|