mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 09:56:00 +00:00
5bf3df3f00
The remaining registers are separated into: - <mach/regs-ost.h> - <mach/regs-rtc.h> - <mach/regs-intc.h> and then we can remove pxa-regs.h completely. Instead of #include this file, let's: 1. include the specific <mach/regs-*.h> with care (if that's absolutely necessary) 2. define the registers in the driver, make cleanly defined API to expose the register access to external with sufficient reason Signed-off-by: Eric Miao <eric.miao@marvell.com>
115 lines
2.8 KiB
ArmAsm
115 lines
2.8 KiB
ArmAsm
/*
|
|
* PXA27x standby mode
|
|
*
|
|
* Author: David Burrage
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include <mach/pxa2xx-regs.h>
|
|
|
|
.text
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
ENTRY(pxa_cpu_standby)
|
|
ldr r0, =PSSR
|
|
mov r1, #(PSSR_PH | PSSR_STS)
|
|
mov r2, #PWRMODE_STANDBY
|
|
mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
|
|
ldr ip, [r3]
|
|
b 1f
|
|
|
|
.align 5
|
|
1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
|
|
str r1, [r0] @ make sure PSSR_PH/STS are clear
|
|
mov pc, lr
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA3xx
|
|
|
|
#define PXA3_MDCNFG 0x0000
|
|
#define PXA3_MDCNFG_DMCEN (1 << 30)
|
|
#define PXA3_DDR_HCAL 0x0060
|
|
#define PXA3_DDR_HCAL_HCRNG 0x1f
|
|
#define PXA3_DDR_HCAL_HCPROG (1 << 28)
|
|
#define PXA3_DDR_HCAL_HCEN (1 << 31)
|
|
#define PXA3_DMCIER 0x0070
|
|
#define PXA3_DMCIER_EDLP (1 << 29)
|
|
#define PXA3_DMCISR 0x0078
|
|
#define PXA3_RCOMP 0x0100
|
|
#define PXA3_RCOMP_SWEVAL (1 << 31)
|
|
|
|
ENTRY(pm_enter_standby_start)
|
|
mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG)
|
|
add r1, r1, #0x00100000
|
|
|
|
/*
|
|
* Preload the TLB entry for accessing the dynamic memory
|
|
* controller registers. Note that page table lookups will
|
|
* fail until the dynamic memory controller has been
|
|
* reinitialised - and that includes MMU page table walks.
|
|
* This also means that only the dynamic memory controller
|
|
* can be reliably accessed in the code following standby.
|
|
*/
|
|
ldr r2, [r1] @ Dummy read PXA3_MDCNFG
|
|
|
|
mcr p14, 0, r0, c7, c0, 0
|
|
.rept 8
|
|
nop
|
|
.endr
|
|
|
|
ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN
|
|
bic r0, r0, #PXA3_DDR_HCAL_HCEN
|
|
str r0, [r1, #PXA3_DDR_HCAL]
|
|
1: ldr r0, [r1, #PXA3_DDR_HCAL]
|
|
tst r0, #PXA3_DDR_HCAL_HCEN
|
|
bne 1b
|
|
|
|
ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP
|
|
orr r0, r0, #PXA3_RCOMP_SWEVAL
|
|
str r0, [r1, #PXA3_RCOMP]
|
|
|
|
mov r0, #~0 @ Clear interrupts
|
|
str r0, [r1, #PXA3_DMCISR]
|
|
|
|
ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP]
|
|
orr r0, r0, #PXA3_DMCIER_EDLP
|
|
str r0, [r1, #PXA3_DMCIER]
|
|
|
|
ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
|
|
bic r0, r0, #PXA3_DDR_HCAL_HCRNG
|
|
orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
|
|
str r0, [r1, #PXA3_DDR_HCAL]
|
|
|
|
1: ldr r0, [r1, #PXA3_DMCISR]
|
|
tst r0, #PXA3_DMCIER_EDLP
|
|
beq 1b
|
|
|
|
ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN]
|
|
orr r0, r0, #PXA3_MDCNFG_DMCEN
|
|
str r0, [r1, #PXA3_MDCNFG]
|
|
1: ldr r0, [r1, #PXA3_MDCNFG]
|
|
tst r0, #PXA3_MDCNFG_DMCEN
|
|
beq 1b
|
|
|
|
ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG]
|
|
orr r0, r0, #2 @ HCRNG
|
|
str r0, [r1, #PXA3_DDR_HCAL]
|
|
|
|
ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt
|
|
bic r0, r0, #0x20000000
|
|
str r0, [r1, #PXA3_DMCIER]
|
|
|
|
mov pc, lr
|
|
ENTRY(pm_enter_standby_end)
|
|
|
|
#endif
|