mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 11:55:53 +00:00
3bfc13c239
Most code changes were made to support RR44xx adapters. - add more PCI device ID. - using PCI BAR[2] to access RR44xx IOP. - using PCI BAR[0] to check and clear RR44xx IRQ. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
124 lines
4.4 KiB
Plaintext
124 lines
4.4 KiB
Plaintext
HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
|
|
|
|
Controller Register Map
|
|
-------------------------
|
|
|
|
For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
|
|
|
|
BAR0 offset Register
|
|
0x11C5C Link Interface IRQ Set
|
|
0x11C60 Link Interface IRQ Clear
|
|
|
|
BAR2 offset Register
|
|
0x10 Inbound Message Register 0
|
|
0x14 Inbound Message Register 1
|
|
0x18 Outbound Message Register 0
|
|
0x1C Outbound Message Register 1
|
|
0x20 Inbound Doorbell Register
|
|
0x24 Inbound Interrupt Status Register
|
|
0x28 Inbound Interrupt Mask Register
|
|
0x30 Outbound Interrupt Status Register
|
|
0x34 Outbound Interrupt Mask Register
|
|
0x40 Inbound Queue Port
|
|
0x44 Outbound Queue Port
|
|
|
|
For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
|
|
|
|
BAR0 offset Register
|
|
0x10 Inbound Message Register 0
|
|
0x14 Inbound Message Register 1
|
|
0x18 Outbound Message Register 0
|
|
0x1C Outbound Message Register 1
|
|
0x20 Inbound Doorbell Register
|
|
0x24 Inbound Interrupt Status Register
|
|
0x28 Inbound Interrupt Mask Register
|
|
0x30 Outbound Interrupt Status Register
|
|
0x34 Outbound Interrupt Mask Register
|
|
0x40 Inbound Queue Port
|
|
0x44 Outbound Queue Port
|
|
|
|
For Marvell IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
|
|
|
|
BAR0 offset Register
|
|
0x20400 Inbound Doorbell Register
|
|
0x20404 Inbound Interrupt Mask Register
|
|
0x20408 Outbound Doorbell Register
|
|
0x2040C Outbound Interrupt Mask Register
|
|
|
|
BAR1 offset Register
|
|
0x0 Inbound Queue Head Pointer
|
|
0x4 Inbound Queue Tail Pointer
|
|
0x8 Outbound Queue Head Pointer
|
|
0xC Outbound Queue Tail Pointer
|
|
0x10 Inbound Message Register
|
|
0x14 Outbound Message Register
|
|
0x40-0x1040 Inbound Queue
|
|
0x1040-0x2040 Outbound Queue
|
|
|
|
|
|
I/O Request Workflow
|
|
----------------------
|
|
|
|
All queued requests are handled via inbound/outbound queue port.
|
|
A request packet can be allocated in either IOP or host memory.
|
|
|
|
To send a request to the controller:
|
|
|
|
- Get a free request packet by reading the inbound queue port or
|
|
allocate a free request in host DMA coherent memory.
|
|
|
|
The value returned from the inbound queue port is an offset
|
|
relative to the IOP BAR0.
|
|
|
|
Requests allocated in host memory must be aligned on 32-bytes boundary.
|
|
|
|
- Fill the packet.
|
|
|
|
- Post the packet to IOP by writing it to inbound queue. For requests
|
|
allocated in IOP memory, write the offset to inbound queue port. For
|
|
requests allocated in host memory, write (0x80000000|(bus_addr>>5))
|
|
to the inbound queue port.
|
|
|
|
- The IOP process the request. When the request is completed, it
|
|
will be put into outbound queue. An outbound interrupt will be
|
|
generated.
|
|
|
|
For requests allocated in IOP memory, the request offset is posted to
|
|
outbound queue.
|
|
|
|
For requests allocated in host memory, (0x80000000|(bus_addr>>5))
|
|
is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
|
|
flag is set in the request, the low 32-bit context value will be
|
|
posted instead.
|
|
|
|
- The host read the outbound queue and complete the request.
|
|
|
|
For requests allocated in IOP memory, the host driver free the request
|
|
by writing it to the outbound queue.
|
|
|
|
Non-queued requests (reset/flush etc) can be sent via inbound message
|
|
register 0. An outbound message with the same value indicates the completion
|
|
of an inbound message.
|
|
|
|
|
|
User-level Interface
|
|
---------------------
|
|
|
|
The driver exposes following sysfs attributes:
|
|
|
|
NAME R/W Description
|
|
driver-version R driver version string
|
|
firmware-version R firmware version string
|
|
|
|
|
|
-----------------------------------------------------------------------------
|
|
Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
|
|
|
|
This file is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
linux@highpoint-tech.com
|
|
http://www.highpoint-tech.com
|