mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 01:10:28 +00:00
cc155c6f2c
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
292 lines
6.6 KiB
C
292 lines
6.6 KiB
C
/*
|
|
* Support for Cogent CSB726
|
|
*
|
|
* Copyright (c) 2008 Dmitry Eremin-Solenikov
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/sm501.h>
|
|
#include <linux/smsc911x.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <mach/csb726.h>
|
|
#include <mach/mfp-pxa27x.h>
|
|
#include <plat/i2c.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/ohci.h>
|
|
#include <mach/pxa2xx-regs.h>
|
|
#include <mach/audio.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/*
|
|
* n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
|
|
* nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
|
|
* XXX: 21,
|
|
* XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
|
|
* XXX: 33 CS_5 for LAN9215 on R1
|
|
*/
|
|
|
|
static unsigned long csb726_pin_config[] = {
|
|
GPIO78_nCS_2, /* EXP_CS */
|
|
GPIO79_nCS_3, /* SMSC9215 */
|
|
GPIO80_nCS_4, /* SM501 */
|
|
|
|
GPIO52_GPIO, /* #SMSC9251 int */
|
|
GPIO53_GPIO, /* SM501 int */
|
|
|
|
GPIO1_GPIO, /* GPIO0 */
|
|
GPIO11_GPIO, /* GPIO1 */
|
|
GPIO9_GPIO, /* GPIO2 */
|
|
GPIO10_GPIO, /* GPIO3 */
|
|
GPIO16_PWM0_OUT, /* or GPIO4 */
|
|
GPIO17_PWM1_OUT, /* or GPIO5 */
|
|
GPIO94_GPIO, /* GPIO6 */
|
|
GPIO95_GPIO, /* GPIO7 */
|
|
GPIO96_GPIO, /* GPIO8 */
|
|
GPIO97_GPIO, /* GPIO9 */
|
|
GPIO15_GPIO, /* EXP_IRQ */
|
|
GPIO18_RDY, /* EXP_WAIT */
|
|
|
|
GPIO0_GPIO, /* PWR_INT */
|
|
GPIO104_GPIO, /* PWR_OFF */
|
|
|
|
GPIO12_GPIO, /* touch irq */
|
|
|
|
GPIO13_SSP2_TXD,
|
|
GPIO14_SSP2_SFRM,
|
|
MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
|
|
GPIO22_SSP2_SCLK,
|
|
|
|
GPIO81_SSP3_TXD,
|
|
GPIO82_SSP3_RXD,
|
|
GPIO83_SSP3_SFRM,
|
|
GPIO84_SSP3_SCLK,
|
|
|
|
GPIO20_GPIO, /* SDIO int */
|
|
GPIO32_MMC_CLK,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO112_MMC_CMD,
|
|
GPIO100_GPIO, /* SD CD */
|
|
GPIO101_GPIO, /* SD WP */
|
|
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO113_AC97_nRESET,
|
|
|
|
GPIO34_FFUART_RXD,
|
|
GPIO35_FFUART_CTS,
|
|
GPIO36_FFUART_DCD,
|
|
GPIO37_FFUART_DSR,
|
|
GPIO38_FFUART_RI,
|
|
GPIO39_FFUART_TXD,
|
|
GPIO40_FFUART_DTR,
|
|
GPIO41_FFUART_RTS,
|
|
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO54_nPCE_2,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16, /* maybe unused */
|
|
GPIO85_nPCE_1,
|
|
GPIO98_GPIO, /* CF IRQ */
|
|
GPIO99_GPIO, /* CF CD */
|
|
GPIO103_GPIO, /* Reset */
|
|
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
};
|
|
|
|
static struct pxamci_platform_data csb726_mci_data;
|
|
|
|
static int csb726_mci_init(struct device *dev,
|
|
irq_handler_t detect, void *data)
|
|
{
|
|
csb726_mci_data.detect_delay = msecs_to_jiffies(500);
|
|
return 0;
|
|
}
|
|
|
|
static struct pxamci_platform_data csb726_mci = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = csb726_mci_init,
|
|
/* FIXME setpower */
|
|
.gpio_card_detect = CSB726_GPIO_MMC_DETECT,
|
|
.gpio_card_ro = CSB726_GPIO_MMC_RO,
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static struct pxaohci_platform_data csb726_ohci_platform_data = {
|
|
.port_mode = PMM_NPS_MODE,
|
|
.flags = ENABLE_PORT1 | NO_OC_PROTECTION,
|
|
};
|
|
|
|
static struct mtd_partition csb726_flash_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.offset = 0,
|
|
.size = CSB726_FLASH_uMON,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
},
|
|
{
|
|
.name = "root",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data csb726_flash_data = {
|
|
.width = 2,
|
|
.parts = csb726_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(csb726_flash_partitions),
|
|
};
|
|
|
|
static struct resource csb726_flash_resources[] = {
|
|
{
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device csb726_flash = {
|
|
.name = "physmap-flash",
|
|
.dev = {
|
|
.platform_data = &csb726_flash_data,
|
|
},
|
|
.resource = csb726_flash_resources,
|
|
.num_resources = ARRAY_SIZE(csb726_flash_resources),
|
|
};
|
|
|
|
static struct resource csb726_sm501_resources[] = {
|
|
{
|
|
.start = PXA_CS4_PHYS,
|
|
.end = PXA_CS4_PHYS + SZ_8M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "sm501-localmem",
|
|
},
|
|
{
|
|
.start = PXA_CS4_PHYS + SZ_64M - SZ_2M,
|
|
.end = PXA_CS4_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "sm501-regs",
|
|
},
|
|
{
|
|
.start = CSB726_IRQ_SM501,
|
|
.end = CSB726_IRQ_SM501,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sm501_initdata csb726_sm501_initdata = {
|
|
/* .devices = SM501_USE_USB_HOST, */
|
|
.devices = SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
|
|
};
|
|
|
|
static struct sm501_platdata csb726_sm501_platdata = {
|
|
.init = &csb726_sm501_initdata,
|
|
};
|
|
|
|
static struct platform_device csb726_sm501 = {
|
|
.name = "sm501",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(csb726_sm501_resources),
|
|
.resource = csb726_sm501_resources,
|
|
.dev = {
|
|
.platform_data = &csb726_sm501_platdata,
|
|
},
|
|
};
|
|
|
|
static struct resource csb726_lan_resources[] = {
|
|
{
|
|
.start = PXA_CS3_PHYS,
|
|
.end = PXA_CS3_PHYS + SZ_64K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = CSB726_IRQ_LAN,
|
|
.end = CSB726_IRQ_LAN,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
},
|
|
};
|
|
|
|
struct smsc911x_platform_config csb726_lan_config = {
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
};
|
|
|
|
|
|
static struct platform_device csb726_lan = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(csb726_lan_resources),
|
|
.resource = csb726_lan_resources,
|
|
.dev = {
|
|
.platform_data = &csb726_lan_config,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&csb726_flash,
|
|
&csb726_sm501,
|
|
&csb726_lan,
|
|
};
|
|
|
|
static void __init csb726_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
|
|
/* MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
|
|
/* MSC2 = 0x06697ff4; *//* none/SM501 */
|
|
MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
pxa_set_i2c_info(NULL);
|
|
pxa27x_set_i2c_power_info(NULL);
|
|
pxa_set_mci_info(&csb726_mci);
|
|
pxa_set_ohci_info(&csb726_ohci_platform_data);
|
|
pxa_set_ac97_info(NULL);
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
}
|
|
|
|
MACHINE_START(CSB726, "Cogent CSB726")
|
|
.phys_io = 0x40000000,
|
|
.boot_params = 0xa0000100,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa27x_init_irq,
|
|
.init_machine = csb726_init,
|
|
.timer = &pxa_timer,
|
|
MACHINE_END
|