mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 10:59:05 +00:00
abebcdfb64
There are little changes in core part, but lots of development are found in drivers, especially ASoC. The diffstat shows regmap- related changes for a slight API additions / changes, and that's all. Looking at the code size statistics, the most significant addition is for Intel Skylake. (Note that SKL support is still underway, the codec driver is missing.) Also STI controller driver is a major addition as well as a few new codec drivers. In HD-audio side, there are fewer changes than the past. The noticeable change is the support of ELD notification from i915 graphics driver. Thus this pull request carries a few changes in drm/i915. Other than that, USB-audio got a rewrite of runtime PM code. It was initiated by lockdep warning, but resulted in a good cleanup in the end. Below are the highlights: Common: - Factoring out of AC'97 reset code from ASoC into the core helper - A few regmap API extensions (in case it's not pulled yet) ASoC: - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek RT298 and ST STI controllers - Machine drivers for Rockchip systems with MAX98090 and RT5645 and RT5650 - Initial driver support for Intel Skylake devices - Lots of rsnd cleanup and enhancements - A few DAPM fixes and cleanups - A large number of cleanups in various drivers (conversion and standardized to regmap, component) mostly by Lars-Peter and Axel HD-audio: - Extended HD-audio core for Intel Skylake controller support - Quirks for Dell headsets, Alienware 15 - Clean up of pin-based quirk tables for Realtek codecs - ELD notifier implenetation for Intel HDMI/DP USB-audio: - Refactor runtime PM code to make lockdep happier -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJV6TwJAAoJEGwxgFQ9KSmkZoEP/06GrsGlfgIfBbnlAKcsZ0t0 RDDCbxmwD8IsjTk180Gs3qBuhVPurhmPxq6Leow5fBktkEK5bIN3eAQkO9aIMroW xxU1UF6Q9XE2j97e/PhhUld7/NP0IQK/YTMuwX74G2kfEkA9Lktl4UjNMw9mKJX2 8OIwz8ZuqSG60znmGlgiqRE4M3Svs1L/jVP1wrPg2DXQfe+ptAJpUTsyVGOMRWm3 IaJ9h5OelPg8Jm61zcg6/pgsdYx4oquCV5wLwMz8rzIUfHb7ox8F7YKOzB+sXtYI zcsTfF2CqifoBcQAh9c+XE4+gMamAdheA+uc8ScUkcskucTj4Fr5tXLiPSN9QMt4 QGOOVjqcpWv5rWwAgzUJvl1/PT4HyQfkXn5tEQVGdg9Ab1SIcQBzD1+nHUV94vKZ N7/grMdqJ56zUGK2fEcBS6BEDlaSToOIHDrQ1iPFNBvmW8qjBq9tYaufTGC6Vtj2 0YKJukzIbyqLIgQtQf44aqLouFIz2lq437PqRQ4W+9C3FwGN9FKCYJ/JzvOGDIJa sSjEwQkJ9vnmZ3E2B30NKb24TG8pPq9WPIN2Rqe5EbHctU3gEnMScwvmG7SmCSG5 LtDVr6Q5XKFM56cVb7tdZl6Jv97BvGu6EERM+zN+8YyMver206rC8upWOev6R2q3 asvLDEchv7Qm3upx+PYg =/sXs -----END PGP SIGNATURE----- Merge tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are little changes in core part, but lots of development are found in drivers, especially ASoC. The diffstat shows regmap-related changes for a slight API additions / changes, and that's all. Looking at the code size statistics, the most significant addition is for Intel Skylake. (Note that SKL support is still underway, the codec driver is missing.) Also STI controller driver is a major addition as well as a few new codec drivers. In HD-audio side, there are fewer changes than the past. The noticeable change is the support of ELD notification from i915 graphics driver. Thus this pull request carries a few changes in drm/i915. Other than that, USB-audio got a rewrite of runtime PM code. It was initiated by lockdep warning, but resulted in a good cleanup in the end. Below are the highlights: Common: - Factoring out of AC'97 reset code from ASoC into the core helper - A few regmap API extensions (in case it's not pulled yet) ASoC: - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek RT298 and ST STI controllers - Machine drivers for Rockchip systems with MAX98090 and RT5645 and RT5650 - Initial driver support for Intel Skylake devices - Lots of rsnd cleanup and enhancements - A few DAPM fixes and cleanups - A large number of cleanups in various drivers (conversion and standardized to regmap, component) mostly by Lars-Peter and Axel HD-audio: - Extended HD-audio core for Intel Skylake controller support - Quirks for Dell headsets, Alienware 15 - Clean up of pin-based quirk tables for Realtek codecs - ELD notifier implenetation for Intel HDMI/DP USB-audio: - Refactor runtime PM code to make lockdep happier" * tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits) drm/i915: Add locks around audio component bind/unbind drm/i915: Drop port_mst_index parameter from pin/eld callback ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup() ALSA: hda - Wake the codec up on pin/ELD notify events ALSA: hda - allow codecs to access the i915 pin/ELD callback drm/i915: Call audio pin/ELD notify function drm/i915: Add audio pin sense / ELD callback ASoC: zx296702-i2s: Fix resource leak when unload module ASoC: sti_uniperif: Ensure component is unregistered when unload module ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure ASoC: Clean up docbook warnings ASoC: txx9: Convert to devm_snd_soc_register_platform ASoC: pxa: Convert to devm_snd_soc_register_platform ASoC: nuc900: Convert to devm_snd_soc_register_platform ASoC: blackfin: Convert to devm_snd_soc_register_platform ASoC: au1x: Convert to devm_snd_soc_register_platform ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops ...
1408 lines
34 KiB
C
1408 lines
34 KiB
C
/*
|
|
* Arizona core driver
|
|
*
|
|
* Copyright 2012 Wolfson Microelectronics plc
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mfd/arizona/core.h>
|
|
#include <linux/mfd/arizona/registers.h>
|
|
|
|
#include "arizona.h"
|
|
|
|
static const char * const wm5102_core_supplies[] = {
|
|
"AVDD",
|
|
"DBVDD1",
|
|
};
|
|
|
|
int arizona_clk32k_enable(struct arizona *arizona)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&arizona->clk_lock);
|
|
|
|
arizona->clk32k_ref++;
|
|
|
|
if (arizona->clk32k_ref == 1) {
|
|
switch (arizona->pdata.clk32k_src) {
|
|
case ARIZONA_32KZ_MCLK1:
|
|
ret = pm_runtime_get_sync(arizona->dev);
|
|
if (ret != 0)
|
|
goto out;
|
|
break;
|
|
}
|
|
|
|
ret = regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_ENA,
|
|
ARIZONA_CLK_32K_ENA);
|
|
}
|
|
|
|
out:
|
|
if (ret != 0)
|
|
arizona->clk32k_ref--;
|
|
|
|
mutex_unlock(&arizona->clk_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_clk32k_enable);
|
|
|
|
int arizona_clk32k_disable(struct arizona *arizona)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&arizona->clk_lock);
|
|
|
|
BUG_ON(arizona->clk32k_ref <= 0);
|
|
|
|
arizona->clk32k_ref--;
|
|
|
|
if (arizona->clk32k_ref == 0) {
|
|
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_ENA, 0);
|
|
|
|
switch (arizona->pdata.clk32k_src) {
|
|
case ARIZONA_32KZ_MCLK1:
|
|
pm_runtime_put_sync(arizona->dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&arizona->clk_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_clk32k_disable);
|
|
|
|
static irqreturn_t arizona_clkgen_err(int irq, void *data)
|
|
{
|
|
struct arizona *arizona = data;
|
|
|
|
dev_err(arizona->dev, "CLKGEN error\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t arizona_underclocked(int irq, void *data)
|
|
{
|
|
struct arizona *arizona = data;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(arizona->regmap, ARIZONA_INTERRUPT_RAW_STATUS_8,
|
|
&val);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to read underclock status: %d\n",
|
|
ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (val & ARIZONA_AIF3_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF3 underclocked\n");
|
|
if (val & ARIZONA_AIF2_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF2 underclocked\n");
|
|
if (val & ARIZONA_AIF1_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF1 underclocked\n");
|
|
if (val & ARIZONA_ISRC3_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC3 underclocked\n");
|
|
if (val & ARIZONA_ISRC2_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC2 underclocked\n");
|
|
if (val & ARIZONA_ISRC1_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC1 underclocked\n");
|
|
if (val & ARIZONA_FX_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "FX underclocked\n");
|
|
if (val & ARIZONA_ASRC_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC underclocked\n");
|
|
if (val & ARIZONA_DAC_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DAC underclocked\n");
|
|
if (val & ARIZONA_ADC_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ADC underclocked\n");
|
|
if (val & ARIZONA_MIXER_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Mixer dropped sample\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t arizona_overclocked(int irq, void *data)
|
|
{
|
|
struct arizona *arizona = data;
|
|
unsigned int val[3];
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(arizona->regmap, ARIZONA_INTERRUPT_RAW_STATUS_6,
|
|
&val[0], 3);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to read overclock status: %d\n",
|
|
ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
switch (arizona->type) {
|
|
case WM8998:
|
|
case WM1814:
|
|
/* Some bits are shifted on WM8998,
|
|
* rearrange to match the standard bit layout
|
|
*/
|
|
val[0] = ((val[0] & 0x60e0) >> 1) |
|
|
((val[0] & 0x1e00) >> 2) |
|
|
(val[0] & 0x000f);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (val[0] & ARIZONA_PWM_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "PWM overclocked\n");
|
|
if (val[0] & ARIZONA_FX_CORE_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "FX core overclocked\n");
|
|
if (val[0] & ARIZONA_DAC_SYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DAC SYS overclocked\n");
|
|
if (val[0] & ARIZONA_DAC_WARP_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DAC WARP overclocked\n");
|
|
if (val[0] & ARIZONA_ADC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ADC overclocked\n");
|
|
if (val[0] & ARIZONA_MIXER_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Mixer overclocked\n");
|
|
if (val[0] & ARIZONA_AIF3_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF3 overclocked\n");
|
|
if (val[0] & ARIZONA_AIF2_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF2 overclocked\n");
|
|
if (val[0] & ARIZONA_AIF1_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF1 overclocked\n");
|
|
if (val[0] & ARIZONA_PAD_CTRL_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Pad control overclocked\n");
|
|
|
|
if (val[1] & ARIZONA_SLIMBUS_SUBSYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Slimbus subsystem overclocked\n");
|
|
if (val[1] & ARIZONA_SLIMBUS_ASYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Slimbus async overclocked\n");
|
|
if (val[1] & ARIZONA_SLIMBUS_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Slimbus sync overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_ASYNC_SYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC async system overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_ASYNC_WARP_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC async WARP overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_SYNC_SYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC sync system overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_SYNC_WARP_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC sync WARP overclocked\n");
|
|
if (val[1] & ARIZONA_ADSP2_1_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DSP1 overclocked\n");
|
|
if (val[1] & ARIZONA_ISRC3_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC3 overclocked\n");
|
|
if (val[1] & ARIZONA_ISRC2_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC2 overclocked\n");
|
|
if (val[1] & ARIZONA_ISRC1_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC1 overclocked\n");
|
|
|
|
if (val[2] & ARIZONA_SPDIF_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "SPDIF overclocked\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int arizona_poll_reg(struct arizona *arizona,
|
|
int timeout, unsigned int reg,
|
|
unsigned int mask, unsigned int target)
|
|
{
|
|
unsigned int val = 0;
|
|
int ret, i;
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
ret = regmap_read(arizona->regmap, reg, &val);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to read reg %u: %d\n",
|
|
reg, ret);
|
|
continue;
|
|
}
|
|
|
|
if ((val & mask) == target)
|
|
return 0;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int arizona_wait_for_boot(struct arizona *arizona)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* We can't use an interrupt as we need to runtime resume to do so,
|
|
* we won't race with the interrupt handler as it'll be blocked on
|
|
* runtime resume.
|
|
*/
|
|
ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
|
|
ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
|
|
|
|
if (!ret)
|
|
regmap_write(arizona->regmap, ARIZONA_INTERRUPT_STATUS_5,
|
|
ARIZONA_BOOT_DONE_STS);
|
|
|
|
pm_runtime_mark_last_busy(arizona->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline void arizona_enable_reset(struct arizona *arizona)
|
|
{
|
|
if (arizona->pdata.reset)
|
|
gpio_set_value_cansleep(arizona->pdata.reset, 0);
|
|
}
|
|
|
|
static void arizona_disable_reset(struct arizona *arizona)
|
|
{
|
|
if (arizona->pdata.reset) {
|
|
switch (arizona->type) {
|
|
case WM5110:
|
|
case WM8280:
|
|
/* Meet requirements for minimum reset duration */
|
|
msleep(5);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
gpio_set_value_cansleep(arizona->pdata.reset, 1);
|
|
msleep(1);
|
|
}
|
|
}
|
|
|
|
struct arizona_sysclk_state {
|
|
unsigned int fll;
|
|
unsigned int sysclk;
|
|
};
|
|
|
|
static int arizona_enable_freerun_sysclk(struct arizona *arizona,
|
|
struct arizona_sysclk_state *state)
|
|
{
|
|
int ret, err;
|
|
|
|
/* Cache existing FLL and SYSCLK settings */
|
|
ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &state->fll);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to cache FLL settings: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
|
|
&state->sysclk);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to cache SYSCLK settings: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Start up SYSCLK using the FLL in free running mode */
|
|
ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1,
|
|
ARIZONA_FLL1_ENA | ARIZONA_FLL1_FREERUN);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to start FLL in freerunning mode: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
|
|
ARIZONA_FLL1_CLOCK_OK_STS,
|
|
ARIZONA_FLL1_CLOCK_OK_STS);
|
|
if (ret) {
|
|
ret = -ETIMEDOUT;
|
|
goto err_fll;
|
|
}
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to start SYSCLK: %d\n", ret);
|
|
goto err_fll;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_fll:
|
|
err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
|
|
if (err)
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply old FLL settings: %d\n", err);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int arizona_disable_freerun_sysclk(struct arizona *arizona,
|
|
struct arizona_sysclk_state *state)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
|
|
state->sysclk);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply old SYSCLK settings: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply old FLL settings: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm5102_apply_hardware_patch(struct arizona *arizona)
|
|
{
|
|
struct arizona_sysclk_state state;
|
|
int err, ret;
|
|
|
|
ret = arizona_enable_freerun_sysclk(arizona, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Start the write sequencer and wait for it to finish */
|
|
ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
|
|
ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to start write sequencer: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
|
|
ARIZONA_WSEQ_BUSY, 0);
|
|
if (ret) {
|
|
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
|
|
ARIZONA_WSEQ_ABORT);
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
|
|
err:
|
|
err = arizona_disable_freerun_sysclk(arizona, &state);
|
|
|
|
return ret ?: err;
|
|
}
|
|
|
|
/*
|
|
* Register patch to some of the CODECs internal write sequences
|
|
* to ensure a clean exit from the low power sleep state.
|
|
*/
|
|
static const struct reg_sequence wm5110_sleep_patch[] = {
|
|
{ 0x337A, 0xC100 },
|
|
{ 0x337B, 0x0041 },
|
|
{ 0x3300, 0xA210 },
|
|
{ 0x3301, 0x050C },
|
|
};
|
|
|
|
static int wm5110_apply_sleep_patch(struct arizona *arizona)
|
|
{
|
|
struct arizona_sysclk_state state;
|
|
int err, ret;
|
|
|
|
ret = arizona_enable_freerun_sysclk(arizona, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_multi_reg_write_bypassed(arizona->regmap,
|
|
wm5110_sleep_patch,
|
|
ARRAY_SIZE(wm5110_sleep_patch));
|
|
|
|
err = arizona_disable_freerun_sysclk(arizona, &state);
|
|
|
|
return ret ?: err;
|
|
}
|
|
|
|
static int wm5102_clear_write_sequencer(struct arizona *arizona)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_3,
|
|
0x0);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to clear write sequencer state: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
arizona_enable_reset(arizona);
|
|
regulator_disable(arizona->dcvdd);
|
|
|
|
msleep(20);
|
|
|
|
ret = regulator_enable(arizona->dcvdd);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to re-enable DCVDD: %d\n", ret);
|
|
return ret;
|
|
}
|
|
arizona_disable_reset(arizona);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int arizona_runtime_resume(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
dev_dbg(arizona->dev, "Leaving AoD mode\n");
|
|
|
|
if (arizona->has_fully_powered_off) {
|
|
dev_dbg(arizona->dev, "Re-enabling core supplies\n");
|
|
|
|
ret = regulator_bulk_enable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable core supplies: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = regulator_enable(arizona->dcvdd);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to enable DCVDD: %d\n", ret);
|
|
if (arizona->has_fully_powered_off)
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
return ret;
|
|
}
|
|
|
|
if (arizona->has_fully_powered_off) {
|
|
arizona_disable_reset(arizona);
|
|
enable_irq(arizona->irq);
|
|
arizona->has_fully_powered_off = false;
|
|
}
|
|
|
|
regcache_cache_only(arizona->regmap, false);
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1, 0);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to connect DCVDD: %d\n", ret);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
ret = wm5102_patch(arizona);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to apply patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = wm5102_apply_hardware_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to apply hardware patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
break;
|
|
case WM5110:
|
|
case WM8280:
|
|
ret = arizona_wait_for_boot(arizona);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1, 0);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to connect DCVDD: %d\n", ret);
|
|
goto err;
|
|
}
|
|
} else {
|
|
/*
|
|
* As this is only called for the internal regulator
|
|
* (where we know voltage ranges available) it is ok
|
|
* to request an exact range.
|
|
*/
|
|
ret = regulator_set_voltage(arizona->dcvdd,
|
|
1200000, 1200000);
|
|
if (ret < 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to set resume voltage: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
ret = wm5110_apply_sleep_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply sleep patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
break;
|
|
default:
|
|
ret = arizona_wait_for_boot(arizona);
|
|
if (ret != 0)
|
|
goto err;
|
|
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1, 0);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to connect DCVDD: %d\n", ret);
|
|
goto err;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
ret = regcache_sync(arizona->regmap);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to restore register cache\n");
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
regcache_cache_only(arizona->regmap, true);
|
|
regulator_disable(arizona->dcvdd);
|
|
return ret;
|
|
}
|
|
|
|
static int arizona_runtime_suspend(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
dev_dbg(arizona->dev, "Entering AoD mode\n");
|
|
|
|
ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to check jack det status: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1,
|
|
ARIZONA_ISOLATE_DCVDD1);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to isolate DCVDD: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
switch (arizona->type) {
|
|
case WM5110:
|
|
case WM8280:
|
|
if (arizona->external_dcvdd)
|
|
break;
|
|
|
|
/*
|
|
* As this is only called for the internal regulator
|
|
* (where we know voltage ranges available) it is ok
|
|
* to request an exact range.
|
|
*/
|
|
ret = regulator_set_voltage(arizona->dcvdd, 1175000, 1175000);
|
|
if (ret < 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to set suspend voltage: %d\n", ret);
|
|
return ret;
|
|
}
|
|
break;
|
|
case WM5102:
|
|
if (!(val & ARIZONA_JD1_ENA)) {
|
|
ret = regmap_write(arizona->regmap,
|
|
ARIZONA_WRITE_SEQUENCER_CTRL_3, 0x0);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to clear write sequencer: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
regcache_cache_only(arizona->regmap, true);
|
|
regcache_mark_dirty(arizona->regmap);
|
|
regulator_disable(arizona->dcvdd);
|
|
|
|
/* Allow us to completely power down if no jack detection */
|
|
if (!(val & ARIZONA_JD1_ENA)) {
|
|
dev_dbg(arizona->dev, "Fully powering off\n");
|
|
|
|
arizona->has_fully_powered_off = true;
|
|
|
|
disable_irq_nosync(arizona->irq);
|
|
arizona_enable_reset(arizona);
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int arizona_suspend(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Suspend, disabling IRQ\n");
|
|
disable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arizona_suspend_late(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Late suspend, reenabling IRQ\n");
|
|
enable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arizona_resume_noirq(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Early resume, disabling IRQ\n");
|
|
disable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arizona_resume(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Late resume, reenabling IRQ\n");
|
|
enable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
const struct dev_pm_ops arizona_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(arizona_runtime_suspend,
|
|
arizona_runtime_resume,
|
|
NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(arizona_suspend, arizona_resume)
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend_late = arizona_suspend_late,
|
|
.resume_noirq = arizona_resume_noirq,
|
|
#endif
|
|
};
|
|
EXPORT_SYMBOL_GPL(arizona_pm_ops);
|
|
|
|
#ifdef CONFIG_OF
|
|
unsigned long arizona_of_get_type(struct device *dev)
|
|
{
|
|
const struct of_device_id *id = of_match_device(arizona_of_match, dev);
|
|
|
|
if (id)
|
|
return (unsigned long)id->data;
|
|
else
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_of_get_type);
|
|
|
|
int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop,
|
|
bool mandatory)
|
|
{
|
|
int gpio;
|
|
|
|
gpio = of_get_named_gpio(arizona->dev->of_node, prop, 0);
|
|
if (gpio < 0) {
|
|
if (mandatory)
|
|
dev_err(arizona->dev,
|
|
"Mandatory DT gpio %s missing/malformed: %d\n",
|
|
prop, gpio);
|
|
|
|
gpio = 0;
|
|
}
|
|
|
|
return gpio;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
|
|
|
|
static int arizona_of_get_core_pdata(struct arizona *arizona)
|
|
{
|
|
struct arizona_pdata *pdata = &arizona->pdata;
|
|
struct property *prop;
|
|
const __be32 *cur;
|
|
u32 val;
|
|
int ret, i;
|
|
int count = 0;
|
|
|
|
pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
|
|
|
|
ret = of_property_read_u32_array(arizona->dev->of_node,
|
|
"wlf,gpio-defaults",
|
|
pdata->gpio_defaults,
|
|
ARRAY_SIZE(pdata->gpio_defaults));
|
|
if (ret >= 0) {
|
|
/*
|
|
* All values are literal except out of range values
|
|
* which are chip default, translate into platform
|
|
* data which uses 0 as chip default and out of range
|
|
* as zero.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
|
|
if (pdata->gpio_defaults[i] > 0xffff)
|
|
pdata->gpio_defaults[i] = 0;
|
|
else if (pdata->gpio_defaults[i] == 0)
|
|
pdata->gpio_defaults[i] = 0x10000;
|
|
}
|
|
} else {
|
|
dev_err(arizona->dev, "Failed to parse GPIO defaults: %d\n",
|
|
ret);
|
|
}
|
|
|
|
of_property_for_each_u32(arizona->dev->of_node, "wlf,inmode", prop,
|
|
cur, val) {
|
|
if (count == ARRAY_SIZE(pdata->inmode))
|
|
break;
|
|
|
|
pdata->inmode[count] = val;
|
|
count++;
|
|
}
|
|
|
|
count = 0;
|
|
of_property_for_each_u32(arizona->dev->of_node, "wlf,dmic-ref", prop,
|
|
cur, val) {
|
|
if (count == ARRAY_SIZE(pdata->dmic_ref))
|
|
break;
|
|
|
|
pdata->dmic_ref[count] = val;
|
|
count++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct of_device_id arizona_of_match[] = {
|
|
{ .compatible = "wlf,wm5102", .data = (void *)WM5102 },
|
|
{ .compatible = "wlf,wm5110", .data = (void *)WM5110 },
|
|
{ .compatible = "wlf,wm8280", .data = (void *)WM8280 },
|
|
{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
|
|
{ .compatible = "wlf,wm8998", .data = (void *)WM8998 },
|
|
{ .compatible = "wlf,wm1814", .data = (void *)WM1814 },
|
|
{},
|
|
};
|
|
EXPORT_SYMBOL_GPL(arizona_of_match);
|
|
#else
|
|
static inline int arizona_of_get_core_pdata(struct arizona *arizona)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct mfd_cell early_devs[] = {
|
|
{ .name = "arizona-ldo1" },
|
|
};
|
|
|
|
static const char * const wm5102_supplies[] = {
|
|
"MICVDD",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"CPVDD",
|
|
"SPKVDDL",
|
|
"SPKVDDR",
|
|
};
|
|
|
|
static const struct mfd_cell wm5102_devs[] = {
|
|
{ .name = "arizona-micsupp" },
|
|
{
|
|
.name = "arizona-extcon",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = 1, /* We only need MICVDD */
|
|
},
|
|
{ .name = "arizona-gpio" },
|
|
{ .name = "arizona-haptics" },
|
|
{ .name = "arizona-pwm" },
|
|
{
|
|
.name = "wm5102-codec",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(wm5102_supplies),
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell wm5110_devs[] = {
|
|
{ .name = "arizona-micsupp" },
|
|
{
|
|
.name = "arizona-extcon",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = 1, /* We only need MICVDD */
|
|
},
|
|
{ .name = "arizona-gpio" },
|
|
{ .name = "arizona-haptics" },
|
|
{ .name = "arizona-pwm" },
|
|
{
|
|
.name = "wm5110-codec",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(wm5102_supplies),
|
|
},
|
|
};
|
|
|
|
static const char * const wm8997_supplies[] = {
|
|
"MICVDD",
|
|
"DBVDD2",
|
|
"CPVDD",
|
|
"SPKVDD",
|
|
};
|
|
|
|
static const struct mfd_cell wm8997_devs[] = {
|
|
{ .name = "arizona-micsupp" },
|
|
{
|
|
.name = "arizona-extcon",
|
|
.parent_supplies = wm8997_supplies,
|
|
.num_parent_supplies = 1, /* We only need MICVDD */
|
|
},
|
|
{ .name = "arizona-gpio" },
|
|
{ .name = "arizona-haptics" },
|
|
{ .name = "arizona-pwm" },
|
|
{
|
|
.name = "wm8997-codec",
|
|
.parent_supplies = wm8997_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(wm8997_supplies),
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell wm8998_devs[] = {
|
|
{
|
|
.name = "arizona-extcon",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = 1, /* We only need MICVDD */
|
|
},
|
|
{ .name = "arizona-gpio" },
|
|
{ .name = "arizona-haptics" },
|
|
{ .name = "arizona-pwm" },
|
|
{
|
|
.name = "wm8998-codec",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(wm5102_supplies),
|
|
},
|
|
{ .name = "arizona-micsupp" },
|
|
};
|
|
|
|
int arizona_dev_init(struct arizona *arizona)
|
|
{
|
|
struct device *dev = arizona->dev;
|
|
const char *type_name;
|
|
unsigned int reg, val, mask;
|
|
int (*apply_patch)(struct arizona *) = NULL;
|
|
int ret, i;
|
|
|
|
dev_set_drvdata(arizona->dev, arizona);
|
|
mutex_init(&arizona->clk_lock);
|
|
|
|
if (dev_get_platdata(arizona->dev))
|
|
memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
|
|
sizeof(arizona->pdata));
|
|
else
|
|
arizona_of_get_core_pdata(arizona);
|
|
|
|
regcache_cache_only(arizona->regmap, true);
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
case WM5110:
|
|
case WM8280:
|
|
case WM8997:
|
|
case WM8998:
|
|
case WM1814:
|
|
for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
|
|
arizona->core_supplies[i].supply
|
|
= wm5102_core_supplies[i];
|
|
arizona->num_core_supplies = ARRAY_SIZE(wm5102_core_supplies);
|
|
break;
|
|
default:
|
|
dev_err(arizona->dev, "Unknown device type %d\n",
|
|
arizona->type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Mark DCVDD as external, LDO1 driver will clear if internal */
|
|
arizona->external_dcvdd = true;
|
|
|
|
ret = mfd_add_devices(arizona->dev, -1, early_devs,
|
|
ARRAY_SIZE(early_devs), NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to add early children: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_regulator_bulk_get(dev, arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request core supplies: %d\n",
|
|
ret);
|
|
goto err_early;
|
|
}
|
|
|
|
/**
|
|
* Don't use devres here because the only device we have to get
|
|
* against is the MFD device and DCVDD will likely be supplied by
|
|
* one of its children. Meaning that the regulator will be
|
|
* destroyed by the time devres calls regulator put.
|
|
*/
|
|
arizona->dcvdd = regulator_get(arizona->dev, "DCVDD");
|
|
if (IS_ERR(arizona->dcvdd)) {
|
|
ret = PTR_ERR(arizona->dcvdd);
|
|
dev_err(dev, "Failed to request DCVDD: %d\n", ret);
|
|
goto err_early;
|
|
}
|
|
|
|
if (arizona->pdata.reset) {
|
|
/* Start out with /RESET low to put the chip into reset */
|
|
ret = devm_gpio_request_one(arizona->dev, arizona->pdata.reset,
|
|
GPIOF_DIR_OUT | GPIOF_INIT_LOW,
|
|
"arizona /RESET");
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request /RESET: %d\n", ret);
|
|
goto err_dcvdd;
|
|
}
|
|
}
|
|
|
|
ret = regulator_bulk_enable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable core supplies: %d\n",
|
|
ret);
|
|
goto err_dcvdd;
|
|
}
|
|
|
|
ret = regulator_enable(arizona->dcvdd);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
arizona_disable_reset(arizona);
|
|
|
|
regcache_cache_only(arizona->regmap, false);
|
|
|
|
/* Verify that this is a chip we know about */
|
|
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to read ID register: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
switch (reg) {
|
|
case 0x5102:
|
|
case 0x5110:
|
|
case 0x6349:
|
|
case 0x8997:
|
|
break;
|
|
default:
|
|
dev_err(arizona->dev, "Unknown device ID: %x\n", reg);
|
|
goto err_reset;
|
|
}
|
|
|
|
/* If we have a /RESET GPIO we'll already be reset */
|
|
if (!arizona->pdata.reset) {
|
|
ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to reset device: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
/* Ensure device startup is complete */
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
ret = regmap_read(arizona->regmap,
|
|
ARIZONA_WRITE_SEQUENCER_CTRL_3, &val);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Failed to check write sequencer state: %d\n",
|
|
ret);
|
|
} else if (val & 0x01) {
|
|
ret = wm5102_clear_write_sequencer(arizona);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ret = arizona_wait_for_boot(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Device failed initial boot: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
/* Read the device ID information & do device specific stuff */
|
|
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to read ID register: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
ret = regmap_read(arizona->regmap, ARIZONA_DEVICE_REVISION,
|
|
&arizona->rev);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to read revision register: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
arizona->rev &= ARIZONA_DEVICE_REVISION_MASK;
|
|
|
|
switch (reg) {
|
|
#ifdef CONFIG_MFD_WM5102
|
|
case 0x5102:
|
|
type_name = "WM5102";
|
|
if (arizona->type != WM5102) {
|
|
dev_err(arizona->dev, "WM5102 registered as %d\n",
|
|
arizona->type);
|
|
arizona->type = WM5102;
|
|
}
|
|
apply_patch = wm5102_patch;
|
|
arizona->rev &= 0x7;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM5110
|
|
case 0x5110:
|
|
switch (arizona->type) {
|
|
case WM5110:
|
|
type_name = "WM5110";
|
|
break;
|
|
case WM8280:
|
|
type_name = "WM8280";
|
|
break;
|
|
default:
|
|
type_name = "WM5110";
|
|
dev_err(arizona->dev, "WM5110 registered as %d\n",
|
|
arizona->type);
|
|
arizona->type = WM5110;
|
|
break;
|
|
}
|
|
apply_patch = wm5110_patch;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8997
|
|
case 0x8997:
|
|
type_name = "WM8997";
|
|
if (arizona->type != WM8997) {
|
|
dev_err(arizona->dev, "WM8997 registered as %d\n",
|
|
arizona->type);
|
|
arizona->type = WM8997;
|
|
}
|
|
apply_patch = wm8997_patch;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8998
|
|
case 0x6349:
|
|
switch (arizona->type) {
|
|
case WM8998:
|
|
type_name = "WM8998";
|
|
break;
|
|
|
|
case WM1814:
|
|
type_name = "WM1814";
|
|
break;
|
|
|
|
default:
|
|
type_name = "WM8998";
|
|
dev_err(arizona->dev, "WM8998 registered as %d\n",
|
|
arizona->type);
|
|
arizona->type = WM8998;
|
|
}
|
|
|
|
apply_patch = wm8998_patch;
|
|
break;
|
|
#endif
|
|
default:
|
|
dev_err(arizona->dev, "Unknown device ID %x\n", reg);
|
|
goto err_reset;
|
|
}
|
|
|
|
dev_info(dev, "%s revision %c\n", type_name, arizona->rev + 'A');
|
|
|
|
if (apply_patch) {
|
|
ret = apply_patch(arizona);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to apply patch: %d\n",
|
|
ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
ret = wm5102_apply_hardware_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to apply hardware patch: %d\n",
|
|
ret);
|
|
goto err_reset;
|
|
}
|
|
break;
|
|
case WM5110:
|
|
case WM8280:
|
|
ret = wm5110_apply_sleep_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to apply sleep patch: %d\n",
|
|
ret);
|
|
goto err_reset;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
|
|
if (!arizona->pdata.gpio_defaults[i])
|
|
continue;
|
|
|
|
regmap_write(arizona->regmap, ARIZONA_GPIO1_CTRL + i,
|
|
arizona->pdata.gpio_defaults[i]);
|
|
}
|
|
|
|
/* Chip default */
|
|
if (!arizona->pdata.clk32k_src)
|
|
arizona->pdata.clk32k_src = ARIZONA_32KZ_MCLK2;
|
|
|
|
switch (arizona->pdata.clk32k_src) {
|
|
case ARIZONA_32KZ_MCLK1:
|
|
case ARIZONA_32KZ_MCLK2:
|
|
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_SRC_MASK,
|
|
arizona->pdata.clk32k_src - 1);
|
|
arizona_clk32k_enable(arizona);
|
|
break;
|
|
case ARIZONA_32KZ_NONE:
|
|
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_SRC_MASK, 2);
|
|
break;
|
|
default:
|
|
dev_err(arizona->dev, "Invalid 32kHz clock source: %d\n",
|
|
arizona->pdata.clk32k_src);
|
|
ret = -EINVAL;
|
|
goto err_reset;
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) {
|
|
if (!arizona->pdata.micbias[i].mV &&
|
|
!arizona->pdata.micbias[i].bypass)
|
|
continue;
|
|
|
|
/* Apply default for bypass mode */
|
|
if (!arizona->pdata.micbias[i].mV)
|
|
arizona->pdata.micbias[i].mV = 2800;
|
|
|
|
val = (arizona->pdata.micbias[i].mV - 1500) / 100;
|
|
|
|
val <<= ARIZONA_MICB1_LVL_SHIFT;
|
|
|
|
if (arizona->pdata.micbias[i].ext_cap)
|
|
val |= ARIZONA_MICB1_EXT_CAP;
|
|
|
|
if (arizona->pdata.micbias[i].discharge)
|
|
val |= ARIZONA_MICB1_DISCH;
|
|
|
|
if (arizona->pdata.micbias[i].soft_start)
|
|
val |= ARIZONA_MICB1_RATE;
|
|
|
|
if (arizona->pdata.micbias[i].bypass)
|
|
val |= ARIZONA_MICB1_BYPASS;
|
|
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_MIC_BIAS_CTRL_1 + i,
|
|
ARIZONA_MICB1_LVL_MASK |
|
|
ARIZONA_MICB1_EXT_CAP |
|
|
ARIZONA_MICB1_DISCH |
|
|
ARIZONA_MICB1_BYPASS |
|
|
ARIZONA_MICB1_RATE, val);
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_INPUT; i++) {
|
|
/* Default for both is 0 so noop with defaults */
|
|
val = arizona->pdata.dmic_ref[i]
|
|
<< ARIZONA_IN1_DMIC_SUP_SHIFT;
|
|
if (arizona->pdata.inmode[i] & ARIZONA_INMODE_DMIC)
|
|
val |= 1 << ARIZONA_IN1_MODE_SHIFT;
|
|
|
|
switch (arizona->type) {
|
|
case WM8998:
|
|
case WM1814:
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ADC_DIGITAL_VOLUME_1L + (i * 8),
|
|
ARIZONA_IN1L_SRC_SE_MASK,
|
|
(arizona->pdata.inmode[i] & ARIZONA_INMODE_SE)
|
|
<< ARIZONA_IN1L_SRC_SE_SHIFT);
|
|
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ADC_DIGITAL_VOLUME_1R + (i * 8),
|
|
ARIZONA_IN1R_SRC_SE_MASK,
|
|
(arizona->pdata.inmode[i] & ARIZONA_INMODE_SE)
|
|
<< ARIZONA_IN1R_SRC_SE_SHIFT);
|
|
|
|
mask = ARIZONA_IN1_DMIC_SUP_MASK |
|
|
ARIZONA_IN1_MODE_MASK;
|
|
break;
|
|
default:
|
|
if (arizona->pdata.inmode[i] & ARIZONA_INMODE_SE)
|
|
val |= 1 << ARIZONA_IN1_SINGLE_ENDED_SHIFT;
|
|
|
|
mask = ARIZONA_IN1_DMIC_SUP_MASK |
|
|
ARIZONA_IN1_MODE_MASK |
|
|
ARIZONA_IN1_SINGLE_ENDED_MASK;
|
|
break;
|
|
}
|
|
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_IN1L_CONTROL + (i * 8),
|
|
mask, val);
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_OUTPUT; i++) {
|
|
/* Default is 0 so noop with defaults */
|
|
if (arizona->pdata.out_mono[i])
|
|
val = ARIZONA_OUT1_MONO;
|
|
else
|
|
val = 0;
|
|
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_OUTPUT_PATH_CONFIG_1L + (i * 8),
|
|
ARIZONA_OUT1_MONO, val);
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_PDM_SPK; i++) {
|
|
if (arizona->pdata.spk_mute[i])
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_PDM_SPK1_CTRL_1 + (i * 2),
|
|
ARIZONA_SPK1_MUTE_ENDIAN_MASK |
|
|
ARIZONA_SPK1_MUTE_SEQ1_MASK,
|
|
arizona->pdata.spk_mute[i]);
|
|
|
|
if (arizona->pdata.spk_fmt[i])
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_PDM_SPK1_CTRL_2 + (i * 2),
|
|
ARIZONA_SPK1_FMT_MASK,
|
|
arizona->pdata.spk_fmt[i]);
|
|
}
|
|
|
|
pm_runtime_set_active(arizona->dev);
|
|
pm_runtime_enable(arizona->dev);
|
|
|
|
/* Set up for interrupts */
|
|
ret = arizona_irq_init(arizona);
|
|
if (ret != 0)
|
|
goto err_reset;
|
|
|
|
pm_runtime_set_autosuspend_delay(arizona->dev, 100);
|
|
pm_runtime_use_autosuspend(arizona->dev);
|
|
|
|
arizona_request_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, "CLKGEN error",
|
|
arizona_clkgen_err, arizona);
|
|
arizona_request_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, "Overclocked",
|
|
arizona_overclocked, arizona);
|
|
arizona_request_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, "Underclocked",
|
|
arizona_underclocked, arizona);
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
|
|
ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
|
|
break;
|
|
case WM5110:
|
|
case WM8280:
|
|
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
|
|
ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
|
|
break;
|
|
case WM8997:
|
|
ret = mfd_add_devices(arizona->dev, -1, wm8997_devs,
|
|
ARRAY_SIZE(wm8997_devs), NULL, 0, NULL);
|
|
break;
|
|
case WM8998:
|
|
case WM1814:
|
|
ret = mfd_add_devices(arizona->dev, -1, wm8998_devs,
|
|
ARRAY_SIZE(wm8998_devs), NULL, 0, NULL);
|
|
break;
|
|
}
|
|
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to add subdevices: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
arizona_irq_exit(arizona);
|
|
err_reset:
|
|
arizona_enable_reset(arizona);
|
|
regulator_disable(arizona->dcvdd);
|
|
err_enable:
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
err_dcvdd:
|
|
regulator_put(arizona->dcvdd);
|
|
err_early:
|
|
mfd_remove_devices(dev);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_dev_init);
|
|
|
|
int arizona_dev_exit(struct arizona *arizona)
|
|
{
|
|
pm_runtime_disable(arizona->dev);
|
|
|
|
regulator_disable(arizona->dcvdd);
|
|
regulator_put(arizona->dcvdd);
|
|
|
|
mfd_remove_devices(arizona->dev);
|
|
arizona_free_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, arizona);
|
|
arizona_free_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, arizona);
|
|
arizona_free_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, arizona);
|
|
arizona_irq_exit(arizona);
|
|
arizona_enable_reset(arizona);
|
|
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_dev_exit);
|