mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-13 20:33:15 +00:00
68d1d07b51
libata lets low level drivers build scsi_host_template and register it to the SCSI layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This patch implements SHT initializers which can be used to initialize all the boilerplate entries in a sht. Three variants of them are implemented - BASE, BMDMA and NCQ - for different types of drivers. Note that entries can be overriden by putting individual initializers after the helper macro. All sht tables are identical before and after this patch. Signed-off-by: Tejun Heo <htejun@gmail.com>
246 lines
6.3 KiB
C
246 lines
6.3 KiB
C
/*
|
|
* ixp4xx PATA/Compact Flash driver
|
|
* Copyright (C) 2006-07 Tower Technologies
|
|
* Author: Alessandro Zummo <a.zummo@towertech.it>
|
|
*
|
|
* An ATA driver to handle a Compact Flash connected
|
|
* to the ixp4xx expansion bus in TrueIDE mode. The CF
|
|
* must have it chip selects connected to two CS lines
|
|
* on the ixp4xx. In the irq is not available, you might
|
|
* want to modify both this driver and libata to run in
|
|
* polling mode.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#define DRV_NAME "pata_ixp4xx_cf"
|
|
#define DRV_VERSION "0.2"
|
|
|
|
static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
|
|
{
|
|
struct ata_device *dev;
|
|
|
|
ata_link_for_each_dev(dev, link) {
|
|
if (ata_dev_enabled(dev)) {
|
|
ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
|
|
dev->pio_mode = XFER_PIO_0;
|
|
dev->xfer_mode = XFER_PIO_0;
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
dev->flags |= ATA_DFLAG_PIO;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev,
|
|
unsigned char *buf, unsigned int buflen, int rw)
|
|
{
|
|
unsigned int i;
|
|
unsigned int words = buflen >> 1;
|
|
u16 *buf16 = (u16 *) buf;
|
|
struct ata_port *ap = dev->link->ap;
|
|
void __iomem *mmio = ap->ioaddr.data_addr;
|
|
struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
|
|
|
|
/* set the expansion bus in 16bit mode and restore
|
|
* 8 bit mode after the transaction.
|
|
*/
|
|
*data->cs0_cfg &= ~(0x01);
|
|
udelay(100);
|
|
|
|
/* Transfer multiple of 2 bytes */
|
|
if (rw == READ)
|
|
for (i = 0; i < words; i++)
|
|
buf16[i] = readw(mmio);
|
|
else
|
|
for (i = 0; i < words; i++)
|
|
writew(buf16[i], mmio);
|
|
|
|
/* Transfer trailing 1 byte, if any. */
|
|
if (unlikely(buflen & 0x01)) {
|
|
u16 align_buf[1] = { 0 };
|
|
unsigned char *trailing_buf = buf + buflen - 1;
|
|
|
|
if (rw == READ) {
|
|
align_buf[0] = readw(mmio);
|
|
memcpy(trailing_buf, align_buf, 1);
|
|
} else {
|
|
memcpy(align_buf, trailing_buf, 1);
|
|
writew(align_buf[0], mmio);
|
|
}
|
|
words++;
|
|
}
|
|
|
|
udelay(100);
|
|
*data->cs0_cfg |= 0x01;
|
|
|
|
return words << 1;
|
|
}
|
|
|
|
static struct scsi_host_template ixp4xx_sht = {
|
|
ATA_PIO_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations ixp4xx_port_ops = {
|
|
.set_mode = ixp4xx_set_mode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.exec_command = ata_exec_command,
|
|
.check_status = ata_check_status,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.data_xfer = ixp4xx_mmio_data_xfer,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_noop_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_sff_port_start,
|
|
};
|
|
|
|
static void ixp4xx_setup_port(struct ata_port *ap,
|
|
struct ixp4xx_pata_data *data,
|
|
unsigned long raw_cs0, unsigned long raw_cs1)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned long raw_cmd = raw_cs0;
|
|
unsigned long raw_ctl = raw_cs1 + 0x06;
|
|
|
|
ioaddr->cmd_addr = data->cs0;
|
|
ioaddr->altstatus_addr = data->cs1 + 0x06;
|
|
ioaddr->ctl_addr = data->cs1 + 0x06;
|
|
|
|
ata_std_ports(ioaddr);
|
|
|
|
#ifndef __ARMEB__
|
|
|
|
/* adjust the addresses to handle the address swizzling of the
|
|
* ixp4xx in little endian mode.
|
|
*/
|
|
|
|
*(unsigned long *)&ioaddr->data_addr ^= 0x02;
|
|
*(unsigned long *)&ioaddr->cmd_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->altstatus_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->ctl_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->error_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->feature_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->nsect_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->lbal_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->lbam_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->lbah_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->device_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->status_addr ^= 0x03;
|
|
*(unsigned long *)&ioaddr->command_addr ^= 0x03;
|
|
|
|
raw_cmd ^= 0x03;
|
|
raw_ctl ^= 0x03;
|
|
#endif
|
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl);
|
|
}
|
|
|
|
static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
|
|
{
|
|
unsigned int irq;
|
|
struct resource *cs0, *cs1;
|
|
struct ata_host *host;
|
|
struct ata_port *ap;
|
|
struct ixp4xx_pata_data *data = pdev->dev.platform_data;
|
|
|
|
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
|
|
if (!cs0 || !cs1)
|
|
return -EINVAL;
|
|
|
|
/* allocate host */
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
/* acquire resources and fill host */
|
|
pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
|
|
|
|
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
|
|
data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
|
|
|
|
if (!data->cs0 || !data->cs1)
|
|
return -ENOMEM;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq)
|
|
set_irq_type(irq, IRQT_RISING);
|
|
|
|
/* Setup expansion bus chip selects */
|
|
*data->cs0_cfg = data->cs0_bits;
|
|
*data->cs1_cfg = data->cs1_bits;
|
|
|
|
ap = host->ports[0];
|
|
|
|
ap->ops = &ixp4xx_port_ops;
|
|
ap->pio_mask = 0x1f; /* PIO4 */
|
|
ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
|
|
|
|
ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* activate host */
|
|
return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
|
|
}
|
|
|
|
static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(dev);
|
|
|
|
ata_host_detach(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ixp4xx_pata_platform_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = ixp4xx_pata_probe,
|
|
.remove = __devexit_p(ixp4xx_pata_remove),
|
|
};
|
|
|
|
static int __init ixp4xx_pata_init(void)
|
|
{
|
|
return platform_driver_register(&ixp4xx_pata_platform_driver);
|
|
}
|
|
|
|
static void __exit ixp4xx_pata_exit(void)
|
|
{
|
|
platform_driver_unregister(&ixp4xx_pata_platform_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
|
|
MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(ixp4xx_pata_init);
|
|
module_exit(ixp4xx_pata_exit);
|