mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 19:07:46 +00:00
69423d99fc
MTD internal API presently uses 32-bit values to represent device size. This patch updates them to 64-bits but leaves the external API unchanged. Extending the external API is a separate issue for several reasons. First, no one needs it at the moment. Secondly, whether the implementation is done with IOCTLs, sysfs or both is still debated. Thirdly external API changes require the internal API to be accepted first. Note that although the MTD API will be able to support 64-bit device sizes, existing drivers do not and are not required to do so, although NAND base has been updated. In general, changing from 32-bit to 64-bit values cause little or no changes to the majority of the code with the following exceptions: - printk message formats - division and modulus of 64-bit values - NAND base support - 32-bit local variables used by mtdpart and mtdconcat - naughtily assuming one structure maps to another in MEMERASE ioctl Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
352 lines
9.2 KiB
C
352 lines
9.2 KiB
C
/*
|
|
* amd76xrom.c
|
|
*
|
|
* Normal mappings of chips in physical memory
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/cfi.h>
|
|
#include <linux/mtd/flashchip.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/list.h>
|
|
|
|
|
|
#define xstr(s) str(s)
|
|
#define str(s) #s
|
|
#define MOD_NAME xstr(KBUILD_BASENAME)
|
|
|
|
#define ADDRESS_NAME_LEN 18
|
|
|
|
#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
|
|
|
|
struct amd76xrom_window {
|
|
void __iomem *virt;
|
|
unsigned long phys;
|
|
unsigned long size;
|
|
struct list_head maps;
|
|
struct resource rsrc;
|
|
struct pci_dev *pdev;
|
|
};
|
|
|
|
struct amd76xrom_map_info {
|
|
struct list_head list;
|
|
struct map_info map;
|
|
struct mtd_info *mtd;
|
|
struct resource rsrc;
|
|
char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
|
|
};
|
|
|
|
/* The 2 bits controlling the window size are often set to allow reading
|
|
* the BIOS, but too small to allow writing, since the lock registers are
|
|
* 4MiB lower in the address space than the data.
|
|
*
|
|
* This is intended to prevent flashing the bios, perhaps accidentally.
|
|
*
|
|
* This parameter allows the normal driver to over-ride the BIOS settings.
|
|
*
|
|
* The bits are 6 and 7. If both bits are set, it is a 5MiB window.
|
|
* If only the 7 Bit is set, it is a 4MiB window. Otherwise, a
|
|
* 64KiB window.
|
|
*
|
|
*/
|
|
static uint win_size_bits;
|
|
module_param(win_size_bits, uint, 0);
|
|
MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x43 byte, normally set by BIOS.");
|
|
|
|
static struct amd76xrom_window amd76xrom_window = {
|
|
.maps = LIST_HEAD_INIT(amd76xrom_window.maps),
|
|
};
|
|
|
|
static void amd76xrom_cleanup(struct amd76xrom_window *window)
|
|
{
|
|
struct amd76xrom_map_info *map, *scratch;
|
|
u8 byte;
|
|
|
|
if (window->pdev) {
|
|
/* Disable writes through the rom window */
|
|
pci_read_config_byte(window->pdev, 0x40, &byte);
|
|
pci_write_config_byte(window->pdev, 0x40, byte & ~1);
|
|
pci_dev_put(window->pdev);
|
|
}
|
|
|
|
/* Free all of the mtd devices */
|
|
list_for_each_entry_safe(map, scratch, &window->maps, list) {
|
|
if (map->rsrc.parent) {
|
|
release_resource(&map->rsrc);
|
|
}
|
|
del_mtd_device(map->mtd);
|
|
map_destroy(map->mtd);
|
|
list_del(&map->list);
|
|
kfree(map);
|
|
}
|
|
if (window->rsrc.parent)
|
|
release_resource(&window->rsrc);
|
|
|
|
if (window->virt) {
|
|
iounmap(window->virt);
|
|
window->virt = NULL;
|
|
window->phys = 0;
|
|
window->size = 0;
|
|
window->pdev = NULL;
|
|
}
|
|
}
|
|
|
|
|
|
static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
|
|
u8 byte;
|
|
struct amd76xrom_window *window = &amd76xrom_window;
|
|
struct amd76xrom_map_info *map = NULL;
|
|
unsigned long map_top;
|
|
|
|
/* Remember the pci dev I find the window in - already have a ref */
|
|
window->pdev = pdev;
|
|
|
|
/* Enable the selected rom window. This is often incorrectly
|
|
* set up by the BIOS, and the 4MiB offset for the lock registers
|
|
* requires the full 5MiB of window space.
|
|
*
|
|
* This 'write, then read' approach leaves the bits for
|
|
* other uses of the hardware info.
|
|
*/
|
|
pci_read_config_byte(pdev, 0x43, &byte);
|
|
pci_write_config_byte(pdev, 0x43, byte | win_size_bits );
|
|
|
|
/* Assume the rom window is properly setup, and find it's size */
|
|
pci_read_config_byte(pdev, 0x43, &byte);
|
|
if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) {
|
|
window->phys = 0xffb00000; /* 5MiB */
|
|
}
|
|
else if ((byte & (1<<7)) == (1<<7)) {
|
|
window->phys = 0xffc00000; /* 4MiB */
|
|
}
|
|
else {
|
|
window->phys = 0xffff0000; /* 64KiB */
|
|
}
|
|
window->size = 0xffffffffUL - window->phys + 1UL;
|
|
|
|
/*
|
|
* Try to reserve the window mem region. If this fails then
|
|
* it is likely due to a fragment of the window being
|
|
* "reseved" by the BIOS. In the case that the
|
|
* request_mem_region() fails then once the rom size is
|
|
* discovered we will try to reserve the unreserved fragment.
|
|
*/
|
|
window->rsrc.name = MOD_NAME;
|
|
window->rsrc.start = window->phys;
|
|
window->rsrc.end = window->phys + window->size - 1;
|
|
window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
if (request_resource(&iomem_resource, &window->rsrc)) {
|
|
window->rsrc.parent = NULL;
|
|
printk(KERN_ERR MOD_NAME
|
|
" %s(): Unable to register resource"
|
|
" 0x%.16llx-0x%.16llx - kernel bug?\n",
|
|
__func__,
|
|
(unsigned long long)window->rsrc.start,
|
|
(unsigned long long)window->rsrc.end);
|
|
}
|
|
|
|
|
|
/* Enable writes through the rom window */
|
|
pci_read_config_byte(pdev, 0x40, &byte);
|
|
pci_write_config_byte(pdev, 0x40, byte | 1);
|
|
|
|
/* FIXME handle registers 0x80 - 0x8C the bios region locks */
|
|
|
|
/* For write accesses caches are useless */
|
|
window->virt = ioremap_nocache(window->phys, window->size);
|
|
if (!window->virt) {
|
|
printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
|
|
window->phys, window->size);
|
|
goto out;
|
|
}
|
|
|
|
/* Get the first address to look for an rom chip at */
|
|
map_top = window->phys;
|
|
#if 1
|
|
/* The probe sequence run over the firmware hub lock
|
|
* registers sets them to 0x7 (no access).
|
|
* Probe at most the last 4M of the address space.
|
|
*/
|
|
if (map_top < 0xffc00000) {
|
|
map_top = 0xffc00000;
|
|
}
|
|
#endif
|
|
/* Loop through and look for rom chips */
|
|
while((map_top - 1) < 0xffffffffUL) {
|
|
struct cfi_private *cfi;
|
|
unsigned long offset;
|
|
int i;
|
|
|
|
if (!map) {
|
|
map = kmalloc(sizeof(*map), GFP_KERNEL);
|
|
}
|
|
if (!map) {
|
|
printk(KERN_ERR MOD_NAME ": kmalloc failed");
|
|
goto out;
|
|
}
|
|
memset(map, 0, sizeof(*map));
|
|
INIT_LIST_HEAD(&map->list);
|
|
map->map.name = map->map_name;
|
|
map->map.phys = map_top;
|
|
offset = map_top - window->phys;
|
|
map->map.virt = (void __iomem *)
|
|
(((unsigned long)(window->virt)) + offset);
|
|
map->map.size = 0xffffffffUL - map_top + 1UL;
|
|
/* Set the name of the map to the address I am trying */
|
|
sprintf(map->map_name, "%s @%08Lx",
|
|
MOD_NAME, (unsigned long long)map->map.phys);
|
|
|
|
/* There is no generic VPP support */
|
|
for(map->map.bankwidth = 32; map->map.bankwidth;
|
|
map->map.bankwidth >>= 1)
|
|
{
|
|
char **probe_type;
|
|
/* Skip bankwidths that are not supported */
|
|
if (!map_bankwidth_supported(map->map.bankwidth))
|
|
continue;
|
|
|
|
/* Setup the map methods */
|
|
simple_map_init(&map->map);
|
|
|
|
/* Try all of the probe methods */
|
|
probe_type = rom_probe_types;
|
|
for(; *probe_type; probe_type++) {
|
|
map->mtd = do_map_probe(*probe_type, &map->map);
|
|
if (map->mtd)
|
|
goto found;
|
|
}
|
|
}
|
|
map_top += ROM_PROBE_STEP_SIZE;
|
|
continue;
|
|
found:
|
|
/* Trim the size if we are larger than the map */
|
|
if (map->mtd->size > map->map.size) {
|
|
printk(KERN_WARNING MOD_NAME
|
|
" rom(%llu) larger than window(%lu). fixing...\n",
|
|
(unsigned long long)map->mtd->size, map->map.size);
|
|
map->mtd->size = map->map.size;
|
|
}
|
|
if (window->rsrc.parent) {
|
|
/*
|
|
* Registering the MTD device in iomem may not be possible
|
|
* if there is a BIOS "reserved" and BUSY range. If this
|
|
* fails then continue anyway.
|
|
*/
|
|
map->rsrc.name = map->map_name;
|
|
map->rsrc.start = map->map.phys;
|
|
map->rsrc.end = map->map.phys + map->mtd->size - 1;
|
|
map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
if (request_resource(&window->rsrc, &map->rsrc)) {
|
|
printk(KERN_ERR MOD_NAME
|
|
": cannot reserve MTD resource\n");
|
|
map->rsrc.parent = NULL;
|
|
}
|
|
}
|
|
|
|
/* Make the whole region visible in the map */
|
|
map->map.virt = window->virt;
|
|
map->map.phys = window->phys;
|
|
cfi = map->map.fldrv_priv;
|
|
for(i = 0; i < cfi->numchips; i++) {
|
|
cfi->chips[i].start += offset;
|
|
}
|
|
|
|
/* Now that the mtd devices is complete claim and export it */
|
|
map->mtd->owner = THIS_MODULE;
|
|
if (add_mtd_device(map->mtd)) {
|
|
map_destroy(map->mtd);
|
|
map->mtd = NULL;
|
|
goto out;
|
|
}
|
|
|
|
|
|
/* Calculate the new value of map_top */
|
|
map_top += map->mtd->size;
|
|
|
|
/* File away the map structure */
|
|
list_add(&map->list, &window->maps);
|
|
map = NULL;
|
|
}
|
|
|
|
out:
|
|
/* Free any left over map structures */
|
|
kfree(map);
|
|
/* See if I have any map structures */
|
|
if (list_empty(&window->maps)) {
|
|
amd76xrom_cleanup(window);
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void __devexit amd76xrom_remove_one (struct pci_dev *pdev)
|
|
{
|
|
struct amd76xrom_window *window = &amd76xrom_window;
|
|
|
|
amd76xrom_cleanup(window);
|
|
}
|
|
|
|
static struct pci_device_id amd76xrom_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ PCI_VENDOR_ID_AMD, 0x7468 }, /* amd8111 support */
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, amd76xrom_pci_tbl);
|
|
|
|
#if 0
|
|
static struct pci_driver amd76xrom_driver = {
|
|
.name = MOD_NAME,
|
|
.id_table = amd76xrom_pci_tbl,
|
|
.probe = amd76xrom_init_one,
|
|
.remove = amd76xrom_remove_one,
|
|
};
|
|
#endif
|
|
|
|
static int __init init_amd76xrom(void)
|
|
{
|
|
struct pci_dev *pdev;
|
|
struct pci_device_id *id;
|
|
pdev = NULL;
|
|
for(id = amd76xrom_pci_tbl; id->vendor; id++) {
|
|
pdev = pci_get_device(id->vendor, id->device, NULL);
|
|
if (pdev) {
|
|
break;
|
|
}
|
|
}
|
|
if (pdev) {
|
|
return amd76xrom_init_one(pdev, &amd76xrom_pci_tbl[0]);
|
|
}
|
|
return -ENXIO;
|
|
#if 0
|
|
return pci_register_driver(&amd76xrom_driver);
|
|
#endif
|
|
}
|
|
|
|
static void __exit cleanup_amd76xrom(void)
|
|
{
|
|
amd76xrom_remove_one(amd76xrom_window.pdev);
|
|
}
|
|
|
|
module_init(init_amd76xrom);
|
|
module_exit(cleanup_amd76xrom);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>");
|
|
MODULE_DESCRIPTION("MTD map driver for BIOS chips on the AMD76X southbridge");
|
|
|