mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 00:42:16 +00:00
be7963b7e7
Initialization of ohci1394 was broken according to one reporter if the
driver was statically linked, i.e. not built as loadable module. Dmesg:
PCI: Device 0000:02:07.0 not available because of resource collisions
ohci1394: Failed to enable OHCI hardware.
This was reported for a Toshiba Satellite 5100-503. The cause is commit
8df4083c52
in Linux 2.6.19-rc1 which only
served purposes of early remote debugging via FireWire. This
functionality is better provided by the currently out-of-tree driver
ohci1394_earlyinit. Reversal of the commit was OK'd by Andi Kleen.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
3542 lines
101 KiB
C
3542 lines
101 KiB
C
/*
|
|
* ohci1394.c - driver for OHCI 1394 boards
|
|
* Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>
|
|
* Gord Peters <GordPeters@smarttech.com>
|
|
* 2001 Ben Collins <bcollins@debian.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
/*
|
|
* Things known to be working:
|
|
* . Async Request Transmit
|
|
* . Async Response Receive
|
|
* . Async Request Receive
|
|
* . Async Response Transmit
|
|
* . Iso Receive
|
|
* . DMA mmap for iso receive
|
|
* . Config ROM generation
|
|
*
|
|
* Things implemented, but still in test phase:
|
|
* . Iso Transmit
|
|
* . Async Stream Packets Transmit (Receive done via Iso interface)
|
|
*
|
|
* Things not implemented:
|
|
* . DMA error recovery
|
|
*
|
|
* Known bugs:
|
|
* . devctl BUS_RESET arg confusion (reset type or root holdoff?)
|
|
* added LONG_RESET_ROOT and SHORT_RESET_ROOT for root holdoff --kk
|
|
*/
|
|
|
|
/*
|
|
* Acknowledgments:
|
|
*
|
|
* Adam J Richter <adam@yggdrasil.com>
|
|
* . Use of pci_class to find device
|
|
*
|
|
* Emilie Chung <emilie.chung@axis.com>
|
|
* . Tip on Async Request Filter
|
|
*
|
|
* Pascal Drolet <pascal.drolet@informission.ca>
|
|
* . Various tips for optimization and functionnalities
|
|
*
|
|
* Robert Ficklin <rficklin@westengineering.com>
|
|
* . Loop in irq_handler
|
|
*
|
|
* James Goodwin <jamesg@Filanet.com>
|
|
* . Various tips on initialization, self-id reception, etc.
|
|
*
|
|
* Albrecht Dress <ad@mpifr-bonn.mpg.de>
|
|
* . Apple PowerBook detection
|
|
*
|
|
* Daniel Kobras <daniel.kobras@student.uni-tuebingen.de>
|
|
* . Reset the board properly before leaving + misc cleanups
|
|
*
|
|
* Leon van Stuivenberg <leonvs@iae.nl>
|
|
* . Bug fixes
|
|
*
|
|
* Ben Collins <bcollins@debian.org>
|
|
* . Working big-endian support
|
|
* . Updated to 2.4.x module scheme (PCI aswell)
|
|
* . Config ROM generation
|
|
*
|
|
* Manfred Weihs <weihs@ict.tuwien.ac.at>
|
|
* . Reworked code for initiating bus resets
|
|
* (long, short, with or without hold-off)
|
|
*
|
|
* Nandu Santhi <contactnandu@users.sourceforge.net>
|
|
* . Added support for nVidia nForce2 onboard Firewire chipset
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/poll.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/irq.h>
|
|
#include <linux/types.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/init.h>
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
#include <asm/machdep.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#endif
|
|
|
|
#include "csr1212.h"
|
|
#include "ieee1394.h"
|
|
#include "ieee1394_types.h"
|
|
#include "hosts.h"
|
|
#include "dma.h"
|
|
#include "iso.h"
|
|
#include "ieee1394_core.h"
|
|
#include "highlevel.h"
|
|
#include "ohci1394.h"
|
|
|
|
#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
|
|
#define OHCI1394_DEBUG
|
|
#endif
|
|
|
|
#ifdef DBGMSG
|
|
#undef DBGMSG
|
|
#endif
|
|
|
|
#ifdef OHCI1394_DEBUG
|
|
#define DBGMSG(fmt, args...) \
|
|
printk(KERN_INFO "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args)
|
|
#else
|
|
#define DBGMSG(fmt, args...) do {} while (0)
|
|
#endif
|
|
|
|
/* print general (card independent) information */
|
|
#define PRINT_G(level, fmt, args...) \
|
|
printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args)
|
|
|
|
/* print card specific information */
|
|
#define PRINT(level, fmt, args...) \
|
|
printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args)
|
|
|
|
/* Module Parameters */
|
|
static int phys_dma = 1;
|
|
module_param(phys_dma, int, 0444);
|
|
MODULE_PARM_DESC(phys_dma, "Enable physical dma (default = 1).");
|
|
|
|
static void dma_trm_tasklet(unsigned long data);
|
|
static void dma_trm_reset(struct dma_trm_ctx *d);
|
|
|
|
static int alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
|
|
enum context_type type, int ctx, int num_desc,
|
|
int buf_size, int split_buf_size, int context_base);
|
|
static void free_dma_rcv_ctx(struct dma_rcv_ctx *d);
|
|
|
|
static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
|
|
enum context_type type, int ctx, int num_desc,
|
|
int context_base);
|
|
|
|
static void ohci1394_pci_remove(struct pci_dev *pdev);
|
|
|
|
#ifndef __LITTLE_ENDIAN
|
|
static const size_t hdr_sizes[] = {
|
|
3, /* TCODE_WRITEQ */
|
|
4, /* TCODE_WRITEB */
|
|
3, /* TCODE_WRITE_RESPONSE */
|
|
0, /* reserved */
|
|
3, /* TCODE_READQ */
|
|
4, /* TCODE_READB */
|
|
3, /* TCODE_READQ_RESPONSE */
|
|
4, /* TCODE_READB_RESPONSE */
|
|
1, /* TCODE_CYCLE_START */
|
|
4, /* TCODE_LOCK_REQUEST */
|
|
2, /* TCODE_ISO_DATA */
|
|
4, /* TCODE_LOCK_RESPONSE */
|
|
/* rest is reserved or link-internal */
|
|
};
|
|
|
|
static inline void header_le32_to_cpu(quadlet_t *data, unsigned char tcode)
|
|
{
|
|
size_t size;
|
|
|
|
if (unlikely(tcode >= ARRAY_SIZE(hdr_sizes)))
|
|
return;
|
|
|
|
size = hdr_sizes[tcode];
|
|
while (size--)
|
|
data[size] = le32_to_cpu(data[size]);
|
|
}
|
|
#else
|
|
#define header_le32_to_cpu(w,x) do {} while (0)
|
|
#endif /* !LITTLE_ENDIAN */
|
|
|
|
/***********************************
|
|
* IEEE-1394 functionality section *
|
|
***********************************/
|
|
|
|
static u8 get_phy_reg(struct ti_ohci *ohci, u8 addr)
|
|
{
|
|
int i;
|
|
unsigned long flags;
|
|
quadlet_t r;
|
|
|
|
spin_lock_irqsave (&ohci->phy_reg_lock, flags);
|
|
|
|
reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000);
|
|
|
|
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
|
|
if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000)
|
|
break;
|
|
|
|
mdelay(1);
|
|
}
|
|
|
|
r = reg_read(ohci, OHCI1394_PhyControl);
|
|
|
|
if (i >= OHCI_LOOP_COUNT)
|
|
PRINT (KERN_ERR, "Get PHY Reg timeout [0x%08x/0x%08x/%d]",
|
|
r, r & 0x80000000, i);
|
|
|
|
spin_unlock_irqrestore (&ohci->phy_reg_lock, flags);
|
|
|
|
return (r & 0x00ff0000) >> 16;
|
|
}
|
|
|
|
static void set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data)
|
|
{
|
|
int i;
|
|
unsigned long flags;
|
|
u32 r = 0;
|
|
|
|
spin_lock_irqsave (&ohci->phy_reg_lock, flags);
|
|
|
|
reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000);
|
|
|
|
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
|
|
r = reg_read(ohci, OHCI1394_PhyControl);
|
|
if (!(r & 0x00004000))
|
|
break;
|
|
|
|
mdelay(1);
|
|
}
|
|
|
|
if (i == OHCI_LOOP_COUNT)
|
|
PRINT (KERN_ERR, "Set PHY Reg timeout [0x%08x/0x%08x/%d]",
|
|
r, r & 0x00004000, i);
|
|
|
|
spin_unlock_irqrestore (&ohci->phy_reg_lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Or's our value into the current value */
|
|
static void set_phy_reg_mask(struct ti_ohci *ohci, u8 addr, u8 data)
|
|
{
|
|
u8 old;
|
|
|
|
old = get_phy_reg (ohci, addr);
|
|
old |= data;
|
|
set_phy_reg (ohci, addr, old);
|
|
|
|
return;
|
|
}
|
|
|
|
static void handle_selfid(struct ti_ohci *ohci, struct hpsb_host *host,
|
|
int phyid, int isroot)
|
|
{
|
|
quadlet_t *q = ohci->selfid_buf_cpu;
|
|
quadlet_t self_id_count=reg_read(ohci, OHCI1394_SelfIDCount);
|
|
size_t size;
|
|
quadlet_t q0, q1;
|
|
|
|
/* Check status of self-id reception */
|
|
|
|
if (ohci->selfid_swap)
|
|
q0 = le32_to_cpu(q[0]);
|
|
else
|
|
q0 = q[0];
|
|
|
|
if ((self_id_count & 0x80000000) ||
|
|
((self_id_count & 0x00FF0000) != (q0 & 0x00FF0000))) {
|
|
PRINT(KERN_ERR,
|
|
"Error in reception of SelfID packets [0x%08x/0x%08x] (count: %d)",
|
|
self_id_count, q0, ohci->self_id_errors);
|
|
|
|
/* Tip by James Goodwin <jamesg@Filanet.com>:
|
|
* We had an error, generate another bus reset in response. */
|
|
if (ohci->self_id_errors<OHCI1394_MAX_SELF_ID_ERRORS) {
|
|
set_phy_reg_mask (ohci, 1, 0x40);
|
|
ohci->self_id_errors++;
|
|
} else {
|
|
PRINT(KERN_ERR,
|
|
"Too many errors on SelfID error reception, giving up!");
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* SelfID Ok, reset error counter. */
|
|
ohci->self_id_errors = 0;
|
|
|
|
size = ((self_id_count & 0x00001FFC) >> 2) - 1;
|
|
q++;
|
|
|
|
while (size > 0) {
|
|
if (ohci->selfid_swap) {
|
|
q0 = le32_to_cpu(q[0]);
|
|
q1 = le32_to_cpu(q[1]);
|
|
} else {
|
|
q0 = q[0];
|
|
q1 = q[1];
|
|
}
|
|
|
|
if (q0 == ~q1) {
|
|
DBGMSG ("SelfID packet 0x%x received", q0);
|
|
hpsb_selfid_received(host, cpu_to_be32(q0));
|
|
if (((q0 & 0x3f000000) >> 24) == phyid)
|
|
DBGMSG ("SelfID for this node is 0x%08x", q0);
|
|
} else {
|
|
PRINT(KERN_ERR,
|
|
"SelfID is inconsistent [0x%08x/0x%08x]", q0, q1);
|
|
}
|
|
q += 2;
|
|
size -= 2;
|
|
}
|
|
|
|
DBGMSG("SelfID complete");
|
|
|
|
return;
|
|
}
|
|
|
|
static void ohci_soft_reset(struct ti_ohci *ohci) {
|
|
int i;
|
|
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
|
|
|
|
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
|
|
if (!(reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_softReset))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
DBGMSG ("Soft reset finished");
|
|
}
|
|
|
|
|
|
/* Generate the dma receive prgs and start the context */
|
|
static void initialize_dma_rcv_ctx(struct dma_rcv_ctx *d, int generate_irq)
|
|
{
|
|
struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
|
|
int i;
|
|
|
|
ohci1394_stop_context(ohci, d->ctrlClear, NULL);
|
|
|
|
for (i=0; i<d->num_desc; i++) {
|
|
u32 c;
|
|
|
|
c = DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE | DMA_CTL_BRANCH;
|
|
if (generate_irq)
|
|
c |= DMA_CTL_IRQ;
|
|
|
|
d->prg_cpu[i]->control = cpu_to_le32(c | d->buf_size);
|
|
|
|
/* End of descriptor list? */
|
|
if (i + 1 < d->num_desc) {
|
|
d->prg_cpu[i]->branchAddress =
|
|
cpu_to_le32((d->prg_bus[i+1] & 0xfffffff0) | 0x1);
|
|
} else {
|
|
d->prg_cpu[i]->branchAddress =
|
|
cpu_to_le32((d->prg_bus[0] & 0xfffffff0));
|
|
}
|
|
|
|
d->prg_cpu[i]->address = cpu_to_le32(d->buf_bus[i]);
|
|
d->prg_cpu[i]->status = cpu_to_le32(d->buf_size);
|
|
}
|
|
|
|
d->buf_ind = 0;
|
|
d->buf_offset = 0;
|
|
|
|
if (d->type == DMA_CTX_ISO) {
|
|
/* Clear contextControl */
|
|
reg_write(ohci, d->ctrlClear, 0xffffffff);
|
|
|
|
/* Set bufferFill, isochHeader, multichannel for IR context */
|
|
reg_write(ohci, d->ctrlSet, 0xd0000000);
|
|
|
|
/* Set the context match register to match on all tags */
|
|
reg_write(ohci, d->ctxtMatch, 0xf0000000);
|
|
|
|
/* Clear the multi channel mask high and low registers */
|
|
reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, 0xffffffff);
|
|
|
|
/* Set up isoRecvIntMask to generate interrupts */
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << d->ctx);
|
|
}
|
|
|
|
/* Tell the controller where the first AR program is */
|
|
reg_write(ohci, d->cmdPtr, d->prg_bus[0] | 0x1);
|
|
|
|
/* Run context */
|
|
reg_write(ohci, d->ctrlSet, 0x00008000);
|
|
|
|
DBGMSG("Receive DMA ctx=%d initialized", d->ctx);
|
|
}
|
|
|
|
/* Initialize the dma transmit context */
|
|
static void initialize_dma_trm_ctx(struct dma_trm_ctx *d)
|
|
{
|
|
struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
|
|
|
|
/* Stop the context */
|
|
ohci1394_stop_context(ohci, d->ctrlClear, NULL);
|
|
|
|
d->prg_ind = 0;
|
|
d->sent_ind = 0;
|
|
d->free_prgs = d->num_desc;
|
|
d->branchAddrPtr = NULL;
|
|
INIT_LIST_HEAD(&d->fifo_list);
|
|
INIT_LIST_HEAD(&d->pending_list);
|
|
|
|
if (d->type == DMA_CTX_ISO) {
|
|
/* enable interrupts */
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << d->ctx);
|
|
}
|
|
|
|
DBGMSG("Transmit DMA ctx=%d initialized", d->ctx);
|
|
}
|
|
|
|
/* Count the number of available iso contexts */
|
|
static int get_nb_iso_ctx(struct ti_ohci *ohci, int reg)
|
|
{
|
|
int i,ctx=0;
|
|
u32 tmp;
|
|
|
|
reg_write(ohci, reg, 0xffffffff);
|
|
tmp = reg_read(ohci, reg);
|
|
|
|
DBGMSG("Iso contexts reg: %08x implemented: %08x", reg, tmp);
|
|
|
|
/* Count the number of contexts */
|
|
for (i=0; i<32; i++) {
|
|
if (tmp & 1) ctx++;
|
|
tmp >>= 1;
|
|
}
|
|
return ctx;
|
|
}
|
|
|
|
/* Global initialization */
|
|
static void ohci_initialize(struct ti_ohci *ohci)
|
|
{
|
|
quadlet_t buf;
|
|
int num_ports, i;
|
|
|
|
spin_lock_init(&ohci->phy_reg_lock);
|
|
|
|
/* Put some defaults to these undefined bus options */
|
|
buf = reg_read(ohci, OHCI1394_BusOptions);
|
|
buf |= 0x60000000; /* Enable CMC and ISC */
|
|
if (hpsb_disable_irm)
|
|
buf &= ~0x80000000;
|
|
else
|
|
buf |= 0x80000000; /* Enable IRMC */
|
|
buf &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */
|
|
buf &= ~0x18000000; /* Disable PMC and BMC */
|
|
reg_write(ohci, OHCI1394_BusOptions, buf);
|
|
|
|
/* Set the bus number */
|
|
reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0);
|
|
|
|
/* Enable posted writes */
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_postedWriteEnable);
|
|
|
|
/* Clear link control register */
|
|
reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
|
|
|
|
/* Enable cycle timer and cycle master and set the IRM
|
|
* contender bit in our self ID packets if appropriate. */
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_CycleTimerEnable |
|
|
OHCI1394_LinkControl_CycleMaster);
|
|
i = get_phy_reg(ohci, 4) | PHY_04_LCTRL;
|
|
if (hpsb_disable_irm)
|
|
i &= ~PHY_04_CONTENDER;
|
|
else
|
|
i |= PHY_04_CONTENDER;
|
|
set_phy_reg(ohci, 4, i);
|
|
|
|
/* Set up self-id dma buffer */
|
|
reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->selfid_buf_bus);
|
|
|
|
/* enable self-id */
|
|
reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_RcvSelfID);
|
|
|
|
/* Set the Config ROM mapping register */
|
|
reg_write(ohci, OHCI1394_ConfigROMmap, ohci->csr_config_rom_bus);
|
|
|
|
/* Now get our max packet size */
|
|
ohci->max_packet_size =
|
|
1<<(((reg_read(ohci, OHCI1394_BusOptions)>>12)&0xf)+1);
|
|
|
|
/* Clear the interrupt mask */
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
|
|
|
|
/* Clear the interrupt mask */
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
|
|
|
|
/* Initialize AR dma */
|
|
initialize_dma_rcv_ctx(&ohci->ar_req_context, 0);
|
|
initialize_dma_rcv_ctx(&ohci->ar_resp_context, 0);
|
|
|
|
/* Initialize AT dma */
|
|
initialize_dma_trm_ctx(&ohci->at_req_context);
|
|
initialize_dma_trm_ctx(&ohci->at_resp_context);
|
|
|
|
/* Accept AR requests from all nodes */
|
|
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
|
|
|
|
/* Set the address range of the physical response unit.
|
|
* Most controllers do not implement it as a writable register though.
|
|
* They will keep a hardwired offset of 0x00010000 and show 0x0 as
|
|
* register content.
|
|
* To actually enable physical responses is the job of our interrupt
|
|
* handler which programs the physical request filter. */
|
|
reg_write(ohci, OHCI1394_PhyUpperBound,
|
|
OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED >> 16);
|
|
|
|
DBGMSG("physUpperBoundOffset=%08x",
|
|
reg_read(ohci, OHCI1394_PhyUpperBound));
|
|
|
|
/* Specify AT retries */
|
|
reg_write(ohci, OHCI1394_ATRetries,
|
|
OHCI1394_MAX_AT_REQ_RETRIES |
|
|
(OHCI1394_MAX_AT_RESP_RETRIES<<4) |
|
|
(OHCI1394_MAX_PHYS_RESP_RETRIES<<8));
|
|
|
|
/* We don't want hardware swapping */
|
|
reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap);
|
|
|
|
/* Enable interrupts */
|
|
reg_write(ohci, OHCI1394_IntMaskSet,
|
|
OHCI1394_unrecoverableError |
|
|
OHCI1394_masterIntEnable |
|
|
OHCI1394_busReset |
|
|
OHCI1394_selfIDComplete |
|
|
OHCI1394_RSPkt |
|
|
OHCI1394_RQPkt |
|
|
OHCI1394_respTxComplete |
|
|
OHCI1394_reqTxComplete |
|
|
OHCI1394_isochRx |
|
|
OHCI1394_isochTx |
|
|
OHCI1394_postedWriteErr |
|
|
OHCI1394_cycleTooLong |
|
|
OHCI1394_cycleInconsistent);
|
|
|
|
/* Enable link */
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
|
|
|
|
buf = reg_read(ohci, OHCI1394_Version);
|
|
PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%d] "
|
|
"MMIO=[%llx-%llx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
|
|
((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10),
|
|
((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), ohci->dev->irq,
|
|
(unsigned long long)pci_resource_start(ohci->dev, 0),
|
|
(unsigned long long)pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1,
|
|
ohci->max_packet_size,
|
|
ohci->nb_iso_rcv_ctx, ohci->nb_iso_xmit_ctx);
|
|
|
|
/* Check all of our ports to make sure that if anything is
|
|
* connected, we enable that port. */
|
|
num_ports = get_phy_reg(ohci, 2) & 0xf;
|
|
for (i = 0; i < num_ports; i++) {
|
|
unsigned int status;
|
|
|
|
set_phy_reg(ohci, 7, i);
|
|
status = get_phy_reg(ohci, 8);
|
|
|
|
if (status & 0x20)
|
|
set_phy_reg(ohci, 8, status & ~1);
|
|
}
|
|
|
|
/* Serial EEPROM Sanity check. */
|
|
if ((ohci->max_packet_size < 512) ||
|
|
(ohci->max_packet_size > 4096)) {
|
|
/* Serial EEPROM contents are suspect, set a sane max packet
|
|
* size and print the raw contents for bug reports if verbose
|
|
* debug is enabled. */
|
|
#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
|
|
int i;
|
|
#endif
|
|
|
|
PRINT(KERN_DEBUG, "Serial EEPROM has suspicious values, "
|
|
"attempting to set max_packet_size to 512 bytes");
|
|
reg_write(ohci, OHCI1394_BusOptions,
|
|
(reg_read(ohci, OHCI1394_BusOptions) & 0xf007) | 0x8002);
|
|
ohci->max_packet_size = 512;
|
|
#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
|
|
PRINT(KERN_DEBUG, " EEPROM Present: %d",
|
|
(reg_read(ohci, OHCI1394_Version) >> 24) & 0x1);
|
|
reg_write(ohci, OHCI1394_GUID_ROM, 0x80000000);
|
|
|
|
for (i = 0;
|
|
((i < 1000) &&
|
|
(reg_read(ohci, OHCI1394_GUID_ROM) & 0x80000000)); i++)
|
|
udelay(10);
|
|
|
|
for (i = 0; i < 0x20; i++) {
|
|
reg_write(ohci, OHCI1394_GUID_ROM, 0x02000000);
|
|
PRINT(KERN_DEBUG, " EEPROM %02x: %02x", i,
|
|
(reg_read(ohci, OHCI1394_GUID_ROM) >> 16) & 0xff);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Insert a packet in the DMA fifo and generate the DMA prg
|
|
* FIXME: rewrite the program in order to accept packets crossing
|
|
* page boundaries.
|
|
* check also that a single dma descriptor doesn't cross a
|
|
* page boundary.
|
|
*/
|
|
static void insert_packet(struct ti_ohci *ohci,
|
|
struct dma_trm_ctx *d, struct hpsb_packet *packet)
|
|
{
|
|
u32 cycleTimer;
|
|
int idx = d->prg_ind;
|
|
|
|
DBGMSG("Inserting packet for node " NODE_BUS_FMT
|
|
", tlabel=%d, tcode=0x%x, speed=%d",
|
|
NODE_BUS_ARGS(ohci->host, packet->node_id), packet->tlabel,
|
|
packet->tcode, packet->speed_code);
|
|
|
|
d->prg_cpu[idx]->begin.address = 0;
|
|
d->prg_cpu[idx]->begin.branchAddress = 0;
|
|
|
|
if (d->type == DMA_CTX_ASYNC_RESP) {
|
|
/*
|
|
* For response packets, we need to put a timeout value in
|
|
* the 16 lower bits of the status... let's try 1 sec timeout
|
|
*/
|
|
cycleTimer = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
|
|
d->prg_cpu[idx]->begin.status = cpu_to_le32(
|
|
(((((cycleTimer>>25)&0x7)+1)&0x7)<<13) |
|
|
((cycleTimer&0x01fff000)>>12));
|
|
|
|
DBGMSG("cycleTimer: %08x timeStamp: %08x",
|
|
cycleTimer, d->prg_cpu[idx]->begin.status);
|
|
} else
|
|
d->prg_cpu[idx]->begin.status = 0;
|
|
|
|
if ( (packet->type == hpsb_async) || (packet->type == hpsb_raw) ) {
|
|
|
|
if (packet->type == hpsb_raw) {
|
|
d->prg_cpu[idx]->data[0] = cpu_to_le32(OHCI1394_TCODE_PHY<<4);
|
|
d->prg_cpu[idx]->data[1] = cpu_to_le32(packet->header[0]);
|
|
d->prg_cpu[idx]->data[2] = cpu_to_le32(packet->header[1]);
|
|
} else {
|
|
d->prg_cpu[idx]->data[0] = packet->speed_code<<16 |
|
|
(packet->header[0] & 0xFFFF);
|
|
|
|
if (packet->tcode == TCODE_ISO_DATA) {
|
|
/* Sending an async stream packet */
|
|
d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000;
|
|
} else {
|
|
/* Sending a normal async request or response */
|
|
d->prg_cpu[idx]->data[1] =
|
|
(packet->header[1] & 0xFFFF) |
|
|
(packet->header[0] & 0xFFFF0000);
|
|
d->prg_cpu[idx]->data[2] = packet->header[2];
|
|
d->prg_cpu[idx]->data[3] = packet->header[3];
|
|
}
|
|
header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode);
|
|
}
|
|
|
|
if (packet->data_size) { /* block transmit */
|
|
if (packet->tcode == TCODE_STREAM_DATA){
|
|
d->prg_cpu[idx]->begin.control =
|
|
cpu_to_le32(DMA_CTL_OUTPUT_MORE |
|
|
DMA_CTL_IMMEDIATE | 0x8);
|
|
} else {
|
|
d->prg_cpu[idx]->begin.control =
|
|
cpu_to_le32(DMA_CTL_OUTPUT_MORE |
|
|
DMA_CTL_IMMEDIATE | 0x10);
|
|
}
|
|
d->prg_cpu[idx]->end.control =
|
|
cpu_to_le32(DMA_CTL_OUTPUT_LAST |
|
|
DMA_CTL_IRQ |
|
|
DMA_CTL_BRANCH |
|
|
packet->data_size);
|
|
/*
|
|
* Check that the packet data buffer
|
|
* does not cross a page boundary.
|
|
*
|
|
* XXX Fix this some day. eth1394 seems to trigger
|
|
* it, but ignoring it doesn't seem to cause a
|
|
* problem.
|
|
*/
|
|
#if 0
|
|
if (cross_bound((unsigned long)packet->data,
|
|
packet->data_size)>0) {
|
|
/* FIXME: do something about it */
|
|
PRINT(KERN_ERR,
|
|
"%s: packet data addr: %p size %Zd bytes "
|
|
"cross page boundary", __FUNCTION__,
|
|
packet->data, packet->data_size);
|
|
}
|
|
#endif
|
|
d->prg_cpu[idx]->end.address = cpu_to_le32(
|
|
pci_map_single(ohci->dev, packet->data,
|
|
packet->data_size,
|
|
PCI_DMA_TODEVICE));
|
|
|
|
d->prg_cpu[idx]->end.branchAddress = 0;
|
|
d->prg_cpu[idx]->end.status = 0;
|
|
if (d->branchAddrPtr)
|
|
*(d->branchAddrPtr) =
|
|
cpu_to_le32(d->prg_bus[idx] | 0x3);
|
|
d->branchAddrPtr =
|
|
&(d->prg_cpu[idx]->end.branchAddress);
|
|
} else { /* quadlet transmit */
|
|
if (packet->type == hpsb_raw)
|
|
d->prg_cpu[idx]->begin.control =
|
|
cpu_to_le32(DMA_CTL_OUTPUT_LAST |
|
|
DMA_CTL_IMMEDIATE |
|
|
DMA_CTL_IRQ |
|
|
DMA_CTL_BRANCH |
|
|
(packet->header_size + 4));
|
|
else
|
|
d->prg_cpu[idx]->begin.control =
|
|
cpu_to_le32(DMA_CTL_OUTPUT_LAST |
|
|
DMA_CTL_IMMEDIATE |
|
|
DMA_CTL_IRQ |
|
|
DMA_CTL_BRANCH |
|
|
packet->header_size);
|
|
|
|
if (d->branchAddrPtr)
|
|
*(d->branchAddrPtr) =
|
|
cpu_to_le32(d->prg_bus[idx] | 0x2);
|
|
d->branchAddrPtr =
|
|
&(d->prg_cpu[idx]->begin.branchAddress);
|
|
}
|
|
|
|
} else { /* iso packet */
|
|
d->prg_cpu[idx]->data[0] = packet->speed_code<<16 |
|
|
(packet->header[0] & 0xFFFF);
|
|
d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000;
|
|
header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode);
|
|
|
|
d->prg_cpu[idx]->begin.control =
|
|
cpu_to_le32(DMA_CTL_OUTPUT_MORE |
|
|
DMA_CTL_IMMEDIATE | 0x8);
|
|
d->prg_cpu[idx]->end.control =
|
|
cpu_to_le32(DMA_CTL_OUTPUT_LAST |
|
|
DMA_CTL_UPDATE |
|
|
DMA_CTL_IRQ |
|
|
DMA_CTL_BRANCH |
|
|
packet->data_size);
|
|
d->prg_cpu[idx]->end.address = cpu_to_le32(
|
|
pci_map_single(ohci->dev, packet->data,
|
|
packet->data_size, PCI_DMA_TODEVICE));
|
|
|
|
d->prg_cpu[idx]->end.branchAddress = 0;
|
|
d->prg_cpu[idx]->end.status = 0;
|
|
DBGMSG("Iso xmit context info: header[%08x %08x]\n"
|
|
" begin=%08x %08x %08x %08x\n"
|
|
" %08x %08x %08x %08x\n"
|
|
" end =%08x %08x %08x %08x",
|
|
d->prg_cpu[idx]->data[0], d->prg_cpu[idx]->data[1],
|
|
d->prg_cpu[idx]->begin.control,
|
|
d->prg_cpu[idx]->begin.address,
|
|
d->prg_cpu[idx]->begin.branchAddress,
|
|
d->prg_cpu[idx]->begin.status,
|
|
d->prg_cpu[idx]->data[0],
|
|
d->prg_cpu[idx]->data[1],
|
|
d->prg_cpu[idx]->data[2],
|
|
d->prg_cpu[idx]->data[3],
|
|
d->prg_cpu[idx]->end.control,
|
|
d->prg_cpu[idx]->end.address,
|
|
d->prg_cpu[idx]->end.branchAddress,
|
|
d->prg_cpu[idx]->end.status);
|
|
if (d->branchAddrPtr)
|
|
*(d->branchAddrPtr) = cpu_to_le32(d->prg_bus[idx] | 0x3);
|
|
d->branchAddrPtr = &(d->prg_cpu[idx]->end.branchAddress);
|
|
}
|
|
d->free_prgs--;
|
|
|
|
/* queue the packet in the appropriate context queue */
|
|
list_add_tail(&packet->driver_list, &d->fifo_list);
|
|
d->prg_ind = (d->prg_ind + 1) % d->num_desc;
|
|
}
|
|
|
|
/*
|
|
* This function fills the FIFO with the (eventual) pending packets
|
|
* and runs or wakes up the DMA prg if necessary.
|
|
*
|
|
* The function MUST be called with the d->lock held.
|
|
*/
|
|
static void dma_trm_flush(struct ti_ohci *ohci, struct dma_trm_ctx *d)
|
|
{
|
|
struct hpsb_packet *packet, *ptmp;
|
|
int idx = d->prg_ind;
|
|
int z = 0;
|
|
|
|
/* insert the packets into the dma fifo */
|
|
list_for_each_entry_safe(packet, ptmp, &d->pending_list, driver_list) {
|
|
if (!d->free_prgs)
|
|
break;
|
|
|
|
/* For the first packet only */
|
|
if (!z)
|
|
z = (packet->data_size) ? 3 : 2;
|
|
|
|
/* Insert the packet */
|
|
list_del_init(&packet->driver_list);
|
|
insert_packet(ohci, d, packet);
|
|
}
|
|
|
|
/* Nothing must have been done, either no free_prgs or no packets */
|
|
if (z == 0)
|
|
return;
|
|
|
|
/* Is the context running ? (should be unless it is
|
|
the first packet to be sent in this context) */
|
|
if (!(reg_read(ohci, d->ctrlSet) & 0x8000)) {
|
|
u32 nodeId = reg_read(ohci, OHCI1394_NodeID);
|
|
|
|
DBGMSG("Starting transmit DMA ctx=%d",d->ctx);
|
|
reg_write(ohci, d->cmdPtr, d->prg_bus[idx] | z);
|
|
|
|
/* Check that the node id is valid, and not 63 */
|
|
if (!(nodeId & 0x80000000) || (nodeId & 0x3f) == 63)
|
|
PRINT(KERN_ERR, "Running dma failed because Node ID is not valid");
|
|
else
|
|
reg_write(ohci, d->ctrlSet, 0x8000);
|
|
} else {
|
|
/* Wake up the dma context if necessary */
|
|
if (!(reg_read(ohci, d->ctrlSet) & 0x400))
|
|
DBGMSG("Waking transmit DMA ctx=%d",d->ctx);
|
|
|
|
/* do this always, to avoid race condition */
|
|
reg_write(ohci, d->ctrlSet, 0x1000);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* Transmission of an async or iso packet */
|
|
static int ohci_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
|
|
{
|
|
struct ti_ohci *ohci = host->hostdata;
|
|
struct dma_trm_ctx *d;
|
|
unsigned long flags;
|
|
|
|
if (packet->data_size > ohci->max_packet_size) {
|
|
PRINT(KERN_ERR,
|
|
"Transmit packet size %Zd is too big",
|
|
packet->data_size);
|
|
return -EOVERFLOW;
|
|
}
|
|
|
|
if (packet->type == hpsb_raw)
|
|
d = &ohci->at_req_context;
|
|
else if ((packet->tcode & 0x02) && (packet->tcode != TCODE_ISO_DATA))
|
|
d = &ohci->at_resp_context;
|
|
else
|
|
d = &ohci->at_req_context;
|
|
|
|
spin_lock_irqsave(&d->lock,flags);
|
|
|
|
list_add_tail(&packet->driver_list, &d->pending_list);
|
|
|
|
dma_trm_flush(ohci, d);
|
|
|
|
spin_unlock_irqrestore(&d->lock,flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
|
|
{
|
|
struct ti_ohci *ohci = host->hostdata;
|
|
int retval = 0, phy_reg;
|
|
|
|
switch (cmd) {
|
|
case RESET_BUS:
|
|
switch (arg) {
|
|
case SHORT_RESET:
|
|
phy_reg = get_phy_reg(ohci, 5);
|
|
phy_reg |= 0x40;
|
|
set_phy_reg(ohci, 5, phy_reg); /* set ISBR */
|
|
break;
|
|
case LONG_RESET:
|
|
phy_reg = get_phy_reg(ohci, 1);
|
|
phy_reg |= 0x40;
|
|
set_phy_reg(ohci, 1, phy_reg); /* set IBR */
|
|
break;
|
|
case SHORT_RESET_NO_FORCE_ROOT:
|
|
phy_reg = get_phy_reg(ohci, 1);
|
|
if (phy_reg & 0x80) {
|
|
phy_reg &= ~0x80;
|
|
set_phy_reg(ohci, 1, phy_reg); /* clear RHB */
|
|
}
|
|
|
|
phy_reg = get_phy_reg(ohci, 5);
|
|
phy_reg |= 0x40;
|
|
set_phy_reg(ohci, 5, phy_reg); /* set ISBR */
|
|
break;
|
|
case LONG_RESET_NO_FORCE_ROOT:
|
|
phy_reg = get_phy_reg(ohci, 1);
|
|
phy_reg &= ~0x80;
|
|
phy_reg |= 0x40;
|
|
set_phy_reg(ohci, 1, phy_reg); /* clear RHB, set IBR */
|
|
break;
|
|
case SHORT_RESET_FORCE_ROOT:
|
|
phy_reg = get_phy_reg(ohci, 1);
|
|
if (!(phy_reg & 0x80)) {
|
|
phy_reg |= 0x80;
|
|
set_phy_reg(ohci, 1, phy_reg); /* set RHB */
|
|
}
|
|
|
|
phy_reg = get_phy_reg(ohci, 5);
|
|
phy_reg |= 0x40;
|
|
set_phy_reg(ohci, 5, phy_reg); /* set ISBR */
|
|
break;
|
|
case LONG_RESET_FORCE_ROOT:
|
|
phy_reg = get_phy_reg(ohci, 1);
|
|
phy_reg |= 0xc0;
|
|
set_phy_reg(ohci, 1, phy_reg); /* set RHB and IBR */
|
|
break;
|
|
default:
|
|
retval = -1;
|
|
}
|
|
break;
|
|
|
|
case GET_CYCLE_COUNTER:
|
|
retval = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
|
|
break;
|
|
|
|
case SET_CYCLE_COUNTER:
|
|
reg_write(ohci, OHCI1394_IsochronousCycleTimer, arg);
|
|
break;
|
|
|
|
case SET_BUS_ID:
|
|
PRINT(KERN_ERR, "devctl command SET_BUS_ID err");
|
|
break;
|
|
|
|
case ACT_CYCLE_MASTER:
|
|
if (arg) {
|
|
/* check if we are root and other nodes are present */
|
|
u32 nodeId = reg_read(ohci, OHCI1394_NodeID);
|
|
if ((nodeId & (1<<30)) && (nodeId & 0x3f)) {
|
|
/*
|
|
* enable cycleTimer, cycleMaster
|
|
*/
|
|
DBGMSG("Cycle master enabled");
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_CycleTimerEnable |
|
|
OHCI1394_LinkControl_CycleMaster);
|
|
}
|
|
} else {
|
|
/* disable cycleTimer, cycleMaster, cycleSource */
|
|
reg_write(ohci, OHCI1394_LinkControlClear,
|
|
OHCI1394_LinkControl_CycleTimerEnable |
|
|
OHCI1394_LinkControl_CycleMaster |
|
|
OHCI1394_LinkControl_CycleSource);
|
|
}
|
|
break;
|
|
|
|
case CANCEL_REQUESTS:
|
|
DBGMSG("Cancel request received");
|
|
dma_trm_reset(&ohci->at_req_context);
|
|
dma_trm_reset(&ohci->at_resp_context);
|
|
break;
|
|
|
|
default:
|
|
PRINT_G(KERN_ERR, "ohci_devctl cmd %d not implemented yet",
|
|
cmd);
|
|
break;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/***********************************
|
|
* rawiso ISO reception *
|
|
***********************************/
|
|
|
|
/*
|
|
We use either buffer-fill or packet-per-buffer DMA mode. The DMA
|
|
buffer is split into "blocks" (regions described by one DMA
|
|
descriptor). Each block must be one page or less in size, and
|
|
must not cross a page boundary.
|
|
|
|
There is one little wrinkle with buffer-fill mode: a packet that
|
|
starts in the final block may wrap around into the first block. But
|
|
the user API expects all packets to be contiguous. Our solution is
|
|
to keep the very last page of the DMA buffer in reserve - if a
|
|
packet spans the gap, we copy its tail into this page.
|
|
*/
|
|
|
|
struct ohci_iso_recv {
|
|
struct ti_ohci *ohci;
|
|
|
|
struct ohci1394_iso_tasklet task;
|
|
int task_active;
|
|
|
|
enum { BUFFER_FILL_MODE = 0,
|
|
PACKET_PER_BUFFER_MODE = 1 } dma_mode;
|
|
|
|
/* memory and PCI mapping for the DMA descriptors */
|
|
struct dma_prog_region prog;
|
|
struct dma_cmd *block; /* = (struct dma_cmd*) prog.virt */
|
|
|
|
/* how many DMA blocks fit in the buffer */
|
|
unsigned int nblocks;
|
|
|
|
/* stride of DMA blocks */
|
|
unsigned int buf_stride;
|
|
|
|
/* number of blocks to batch between interrupts */
|
|
int block_irq_interval;
|
|
|
|
/* block that DMA will finish next */
|
|
int block_dma;
|
|
|
|
/* (buffer-fill only) block that the reader will release next */
|
|
int block_reader;
|
|
|
|
/* (buffer-fill only) bytes of buffer the reader has released,
|
|
less than one block */
|
|
int released_bytes;
|
|
|
|
/* (buffer-fill only) buffer offset at which the next packet will appear */
|
|
int dma_offset;
|
|
|
|
/* OHCI DMA context control registers */
|
|
u32 ContextControlSet;
|
|
u32 ContextControlClear;
|
|
u32 CommandPtr;
|
|
u32 ContextMatch;
|
|
};
|
|
|
|
static void ohci_iso_recv_task(unsigned long data);
|
|
static void ohci_iso_recv_stop(struct hpsb_iso *iso);
|
|
static void ohci_iso_recv_shutdown(struct hpsb_iso *iso);
|
|
static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync);
|
|
static void ohci_iso_recv_program(struct hpsb_iso *iso);
|
|
|
|
static int ohci_iso_recv_init(struct hpsb_iso *iso)
|
|
{
|
|
struct ti_ohci *ohci = iso->host->hostdata;
|
|
struct ohci_iso_recv *recv;
|
|
int ctx;
|
|
int ret = -ENOMEM;
|
|
|
|
recv = kmalloc(sizeof(*recv), GFP_KERNEL);
|
|
if (!recv)
|
|
return -ENOMEM;
|
|
|
|
iso->hostdata = recv;
|
|
recv->ohci = ohci;
|
|
recv->task_active = 0;
|
|
dma_prog_region_init(&recv->prog);
|
|
recv->block = NULL;
|
|
|
|
/* use buffer-fill mode, unless irq_interval is 1
|
|
(note: multichannel requires buffer-fill) */
|
|
|
|
if (((iso->irq_interval == 1 && iso->dma_mode == HPSB_ISO_DMA_OLD_ABI) ||
|
|
iso->dma_mode == HPSB_ISO_DMA_PACKET_PER_BUFFER) && iso->channel != -1) {
|
|
recv->dma_mode = PACKET_PER_BUFFER_MODE;
|
|
} else {
|
|
recv->dma_mode = BUFFER_FILL_MODE;
|
|
}
|
|
|
|
/* set nblocks, buf_stride, block_irq_interval */
|
|
|
|
if (recv->dma_mode == BUFFER_FILL_MODE) {
|
|
recv->buf_stride = PAGE_SIZE;
|
|
|
|
/* one block per page of data in the DMA buffer, minus the final guard page */
|
|
recv->nblocks = iso->buf_size/PAGE_SIZE - 1;
|
|
if (recv->nblocks < 3) {
|
|
DBGMSG("ohci_iso_recv_init: DMA buffer too small");
|
|
goto err;
|
|
}
|
|
|
|
/* iso->irq_interval is in packets - translate that to blocks */
|
|
if (iso->irq_interval == 1)
|
|
recv->block_irq_interval = 1;
|
|
else
|
|
recv->block_irq_interval = iso->irq_interval *
|
|
((recv->nblocks+1)/iso->buf_packets);
|
|
if (recv->block_irq_interval*4 > recv->nblocks)
|
|
recv->block_irq_interval = recv->nblocks/4;
|
|
if (recv->block_irq_interval < 1)
|
|
recv->block_irq_interval = 1;
|
|
|
|
} else {
|
|
int max_packet_size;
|
|
|
|
recv->nblocks = iso->buf_packets;
|
|
recv->block_irq_interval = iso->irq_interval;
|
|
if (recv->block_irq_interval * 4 > iso->buf_packets)
|
|
recv->block_irq_interval = iso->buf_packets / 4;
|
|
if (recv->block_irq_interval < 1)
|
|
recv->block_irq_interval = 1;
|
|
|
|
/* choose a buffer stride */
|
|
/* must be a power of 2, and <= PAGE_SIZE */
|
|
|
|
max_packet_size = iso->buf_size / iso->buf_packets;
|
|
|
|
for (recv->buf_stride = 8; recv->buf_stride < max_packet_size;
|
|
recv->buf_stride *= 2);
|
|
|
|
if (recv->buf_stride*iso->buf_packets > iso->buf_size ||
|
|
recv->buf_stride > PAGE_SIZE) {
|
|
/* this shouldn't happen, but anyway... */
|
|
DBGMSG("ohci_iso_recv_init: problem choosing a buffer stride");
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
recv->block_reader = 0;
|
|
recv->released_bytes = 0;
|
|
recv->block_dma = 0;
|
|
recv->dma_offset = 0;
|
|
|
|
/* size of DMA program = one descriptor per block */
|
|
if (dma_prog_region_alloc(&recv->prog,
|
|
sizeof(struct dma_cmd) * recv->nblocks,
|
|
recv->ohci->dev))
|
|
goto err;
|
|
|
|
recv->block = (struct dma_cmd*) recv->prog.kvirt;
|
|
|
|
ohci1394_init_iso_tasklet(&recv->task,
|
|
iso->channel == -1 ? OHCI_ISO_MULTICHANNEL_RECEIVE :
|
|
OHCI_ISO_RECEIVE,
|
|
ohci_iso_recv_task, (unsigned long) iso);
|
|
|
|
if (ohci1394_register_iso_tasklet(recv->ohci, &recv->task) < 0) {
|
|
ret = -EBUSY;
|
|
goto err;
|
|
}
|
|
|
|
recv->task_active = 1;
|
|
|
|
/* recv context registers are spaced 32 bytes apart */
|
|
ctx = recv->task.context;
|
|
recv->ContextControlSet = OHCI1394_IsoRcvContextControlSet + 32 * ctx;
|
|
recv->ContextControlClear = OHCI1394_IsoRcvContextControlClear + 32 * ctx;
|
|
recv->CommandPtr = OHCI1394_IsoRcvCommandPtr + 32 * ctx;
|
|
recv->ContextMatch = OHCI1394_IsoRcvContextMatch + 32 * ctx;
|
|
|
|
if (iso->channel == -1) {
|
|
/* clear multi-channel selection mask */
|
|
reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, 0xFFFFFFFF);
|
|
reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, 0xFFFFFFFF);
|
|
}
|
|
|
|
/* write the DMA program */
|
|
ohci_iso_recv_program(iso);
|
|
|
|
DBGMSG("ohci_iso_recv_init: %s mode, DMA buffer is %lu pages"
|
|
" (%u bytes), using %u blocks, buf_stride %u, block_irq_interval %d",
|
|
recv->dma_mode == BUFFER_FILL_MODE ?
|
|
"buffer-fill" : "packet-per-buffer",
|
|
iso->buf_size/PAGE_SIZE, iso->buf_size,
|
|
recv->nblocks, recv->buf_stride, recv->block_irq_interval);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
ohci_iso_recv_shutdown(iso);
|
|
return ret;
|
|
}
|
|
|
|
static void ohci_iso_recv_stop(struct hpsb_iso *iso)
|
|
{
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
|
|
/* disable interrupts */
|
|
reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << recv->task.context);
|
|
|
|
/* halt DMA */
|
|
ohci1394_stop_context(recv->ohci, recv->ContextControlClear, NULL);
|
|
}
|
|
|
|
static void ohci_iso_recv_shutdown(struct hpsb_iso *iso)
|
|
{
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
|
|
if (recv->task_active) {
|
|
ohci_iso_recv_stop(iso);
|
|
ohci1394_unregister_iso_tasklet(recv->ohci, &recv->task);
|
|
recv->task_active = 0;
|
|
}
|
|
|
|
dma_prog_region_free(&recv->prog);
|
|
kfree(recv);
|
|
iso->hostdata = NULL;
|
|
}
|
|
|
|
/* set up a "gapped" ring buffer DMA program */
|
|
static void ohci_iso_recv_program(struct hpsb_iso *iso)
|
|
{
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
int blk;
|
|
|
|
/* address of 'branch' field in previous DMA descriptor */
|
|
u32 *prev_branch = NULL;
|
|
|
|
for (blk = 0; blk < recv->nblocks; blk++) {
|
|
u32 control;
|
|
|
|
/* the DMA descriptor */
|
|
struct dma_cmd *cmd = &recv->block[blk];
|
|
|
|
/* offset of the DMA descriptor relative to the DMA prog buffer */
|
|
unsigned long prog_offset = blk * sizeof(struct dma_cmd);
|
|
|
|
/* offset of this packet's data within the DMA buffer */
|
|
unsigned long buf_offset = blk * recv->buf_stride;
|
|
|
|
if (recv->dma_mode == BUFFER_FILL_MODE) {
|
|
control = 2 << 28; /* INPUT_MORE */
|
|
} else {
|
|
control = 3 << 28; /* INPUT_LAST */
|
|
}
|
|
|
|
control |= 8 << 24; /* s = 1, update xferStatus and resCount */
|
|
|
|
/* interrupt on last block, and at intervals */
|
|
if (blk == recv->nblocks-1 || (blk % recv->block_irq_interval) == 0) {
|
|
control |= 3 << 20; /* want interrupt */
|
|
}
|
|
|
|
control |= 3 << 18; /* enable branch to address */
|
|
control |= recv->buf_stride;
|
|
|
|
cmd->control = cpu_to_le32(control);
|
|
cmd->address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, buf_offset));
|
|
cmd->branchAddress = 0; /* filled in on next loop */
|
|
cmd->status = cpu_to_le32(recv->buf_stride);
|
|
|
|
/* link the previous descriptor to this one */
|
|
if (prev_branch) {
|
|
*prev_branch = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, prog_offset) | 1);
|
|
}
|
|
|
|
prev_branch = &cmd->branchAddress;
|
|
}
|
|
|
|
/* the final descriptor's branch address and Z should be left at 0 */
|
|
}
|
|
|
|
/* listen or unlisten to a specific channel (multi-channel mode only) */
|
|
static void ohci_iso_recv_change_channel(struct hpsb_iso *iso, unsigned char channel, int listen)
|
|
{
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
int reg, i;
|
|
|
|
if (channel < 32) {
|
|
reg = listen ? OHCI1394_IRMultiChanMaskLoSet : OHCI1394_IRMultiChanMaskLoClear;
|
|
i = channel;
|
|
} else {
|
|
reg = listen ? OHCI1394_IRMultiChanMaskHiSet : OHCI1394_IRMultiChanMaskHiClear;
|
|
i = channel - 32;
|
|
}
|
|
|
|
reg_write(recv->ohci, reg, (1 << i));
|
|
|
|
/* issue a dummy read to force all PCI writes to be posted immediately */
|
|
mb();
|
|
reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer);
|
|
}
|
|
|
|
static void ohci_iso_recv_set_channel_mask(struct hpsb_iso *iso, u64 mask)
|
|
{
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
int i;
|
|
|
|
for (i = 0; i < 64; i++) {
|
|
if (mask & (1ULL << i)) {
|
|
if (i < 32)
|
|
reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoSet, (1 << i));
|
|
else
|
|
reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiSet, (1 << (i-32)));
|
|
} else {
|
|
if (i < 32)
|
|
reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, (1 << i));
|
|
else
|
|
reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, (1 << (i-32)));
|
|
}
|
|
}
|
|
|
|
/* issue a dummy read to force all PCI writes to be posted immediately */
|
|
mb();
|
|
reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer);
|
|
}
|
|
|
|
static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync)
|
|
{
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
struct ti_ohci *ohci = recv->ohci;
|
|
u32 command, contextMatch;
|
|
|
|
reg_write(recv->ohci, recv->ContextControlClear, 0xFFFFFFFF);
|
|
wmb();
|
|
|
|
/* always keep ISO headers */
|
|
command = (1 << 30);
|
|
|
|
if (recv->dma_mode == BUFFER_FILL_MODE)
|
|
command |= (1 << 31);
|
|
|
|
reg_write(recv->ohci, recv->ContextControlSet, command);
|
|
|
|
/* match on specified tags */
|
|
contextMatch = tag_mask << 28;
|
|
|
|
if (iso->channel == -1) {
|
|
/* enable multichannel reception */
|
|
reg_write(recv->ohci, recv->ContextControlSet, (1 << 28));
|
|
} else {
|
|
/* listen on channel */
|
|
contextMatch |= iso->channel;
|
|
}
|
|
|
|
if (cycle != -1) {
|
|
u32 seconds;
|
|
|
|
/* enable cycleMatch */
|
|
reg_write(recv->ohci, recv->ContextControlSet, (1 << 29));
|
|
|
|
/* set starting cycle */
|
|
cycle &= 0x1FFF;
|
|
|
|
/* 'cycle' is only mod 8000, but we also need two 'seconds' bits -
|
|
just snarf them from the current time */
|
|
seconds = reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer) >> 25;
|
|
|
|
/* advance one second to give some extra time for DMA to start */
|
|
seconds += 1;
|
|
|
|
cycle |= (seconds & 3) << 13;
|
|
|
|
contextMatch |= cycle << 12;
|
|
}
|
|
|
|
if (sync != -1) {
|
|
/* set sync flag on first DMA descriptor */
|
|
struct dma_cmd *cmd = &recv->block[recv->block_dma];
|
|
cmd->control |= cpu_to_le32(DMA_CTL_WAIT);
|
|
|
|
/* match sync field */
|
|
contextMatch |= (sync&0xf)<<8;
|
|
}
|
|
|
|
reg_write(recv->ohci, recv->ContextMatch, contextMatch);
|
|
|
|
/* address of first descriptor block */
|
|
command = dma_prog_region_offset_to_bus(&recv->prog,
|
|
recv->block_dma * sizeof(struct dma_cmd));
|
|
command |= 1; /* Z=1 */
|
|
|
|
reg_write(recv->ohci, recv->CommandPtr, command);
|
|
|
|
/* enable interrupts */
|
|
reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskSet, 1 << recv->task.context);
|
|
|
|
wmb();
|
|
|
|
/* run */
|
|
reg_write(recv->ohci, recv->ContextControlSet, 0x8000);
|
|
|
|
/* issue a dummy read of the cycle timer register to force
|
|
all PCI writes to be posted immediately */
|
|
mb();
|
|
reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer);
|
|
|
|
/* check RUN */
|
|
if (!(reg_read(recv->ohci, recv->ContextControlSet) & 0x8000)) {
|
|
PRINT(KERN_ERR,
|
|
"Error starting IR DMA (ContextControl 0x%08x)\n",
|
|
reg_read(recv->ohci, recv->ContextControlSet));
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ohci_iso_recv_release_block(struct ohci_iso_recv *recv, int block)
|
|
{
|
|
/* re-use the DMA descriptor for the block */
|
|
/* by linking the previous descriptor to it */
|
|
|
|
int next_i = block;
|
|
int prev_i = (next_i == 0) ? (recv->nblocks - 1) : (next_i - 1);
|
|
|
|
struct dma_cmd *next = &recv->block[next_i];
|
|
struct dma_cmd *prev = &recv->block[prev_i];
|
|
|
|
/* ignore out-of-range requests */
|
|
if ((block < 0) || (block > recv->nblocks))
|
|
return;
|
|
|
|
/* 'next' becomes the new end of the DMA chain,
|
|
so disable branch and enable interrupt */
|
|
next->branchAddress = 0;
|
|
next->control |= cpu_to_le32(3 << 20);
|
|
next->status = cpu_to_le32(recv->buf_stride);
|
|
|
|
/* link prev to next */
|
|
prev->branchAddress = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog,
|
|
sizeof(struct dma_cmd) * next_i)
|
|
| 1); /* Z=1 */
|
|
|
|
/* disable interrupt on previous DMA descriptor, except at intervals */
|
|
if ((prev_i % recv->block_irq_interval) == 0) {
|
|
prev->control |= cpu_to_le32(3 << 20); /* enable interrupt */
|
|
} else {
|
|
prev->control &= cpu_to_le32(~(3<<20)); /* disable interrupt */
|
|
}
|
|
wmb();
|
|
|
|
/* wake up DMA in case it fell asleep */
|
|
reg_write(recv->ohci, recv->ContextControlSet, (1 << 12));
|
|
}
|
|
|
|
static void ohci_iso_recv_bufferfill_release(struct ohci_iso_recv *recv,
|
|
struct hpsb_iso_packet_info *info)
|
|
{
|
|
/* release the memory where the packet was */
|
|
recv->released_bytes += info->total_len;
|
|
|
|
/* have we released enough memory for one block? */
|
|
while (recv->released_bytes > recv->buf_stride) {
|
|
ohci_iso_recv_release_block(recv, recv->block_reader);
|
|
recv->block_reader = (recv->block_reader + 1) % recv->nblocks;
|
|
recv->released_bytes -= recv->buf_stride;
|
|
}
|
|
}
|
|
|
|
static inline void ohci_iso_recv_release(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info)
|
|
{
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
if (recv->dma_mode == BUFFER_FILL_MODE) {
|
|
ohci_iso_recv_bufferfill_release(recv, info);
|
|
} else {
|
|
ohci_iso_recv_release_block(recv, info - iso->infos);
|
|
}
|
|
}
|
|
|
|
/* parse all packets from blocks that have been fully received */
|
|
static void ohci_iso_recv_bufferfill_parse(struct hpsb_iso *iso, struct ohci_iso_recv *recv)
|
|
{
|
|
int wake = 0;
|
|
int runaway = 0;
|
|
struct ti_ohci *ohci = recv->ohci;
|
|
|
|
while (1) {
|
|
/* we expect the next parsable packet to begin at recv->dma_offset */
|
|
/* note: packet layout is as shown in section 10.6.1.1 of the OHCI spec */
|
|
|
|
unsigned int offset;
|
|
unsigned short len, cycle, total_len;
|
|
unsigned char channel, tag, sy;
|
|
|
|
unsigned char *p = iso->data_buf.kvirt;
|
|
|
|
unsigned int this_block = recv->dma_offset/recv->buf_stride;
|
|
|
|
/* don't loop indefinitely */
|
|
if (runaway++ > 100000) {
|
|
atomic_inc(&iso->overflows);
|
|
PRINT(KERN_ERR,
|
|
"IR DMA error - Runaway during buffer parsing!\n");
|
|
break;
|
|
}
|
|
|
|
/* stop parsing once we arrive at block_dma (i.e. don't get ahead of DMA) */
|
|
if (this_block == recv->block_dma)
|
|
break;
|
|
|
|
wake = 1;
|
|
|
|
/* parse data length, tag, channel, and sy */
|
|
|
|
/* note: we keep our own local copies of 'len' and 'offset'
|
|
so the user can't mess with them by poking in the mmap area */
|
|
|
|
len = p[recv->dma_offset+2] | (p[recv->dma_offset+3] << 8);
|
|
|
|
if (len > 4096) {
|
|
PRINT(KERN_ERR,
|
|
"IR DMA error - bogus 'len' value %u\n", len);
|
|
}
|
|
|
|
channel = p[recv->dma_offset+1] & 0x3F;
|
|
tag = p[recv->dma_offset+1] >> 6;
|
|
sy = p[recv->dma_offset+0] & 0xF;
|
|
|
|
/* advance to data payload */
|
|
recv->dma_offset += 4;
|
|
|
|
/* check for wrap-around */
|
|
if (recv->dma_offset >= recv->buf_stride*recv->nblocks) {
|
|
recv->dma_offset -= recv->buf_stride*recv->nblocks;
|
|
}
|
|
|
|
/* dma_offset now points to the first byte of the data payload */
|
|
offset = recv->dma_offset;
|
|
|
|
/* advance to xferStatus/timeStamp */
|
|
recv->dma_offset += len;
|
|
|
|
total_len = len + 8; /* 8 bytes header+trailer in OHCI packet */
|
|
/* payload is padded to 4 bytes */
|
|
if (len % 4) {
|
|
recv->dma_offset += 4 - (len%4);
|
|
total_len += 4 - (len%4);
|
|
}
|
|
|
|
/* check for wrap-around */
|
|
if (recv->dma_offset >= recv->buf_stride*recv->nblocks) {
|
|
/* uh oh, the packet data wraps from the last
|
|
to the first DMA block - make the packet
|
|
contiguous by copying its "tail" into the
|
|
guard page */
|
|
|
|
int guard_off = recv->buf_stride*recv->nblocks;
|
|
int tail_len = len - (guard_off - offset);
|
|
|
|
if (tail_len > 0 && tail_len < recv->buf_stride) {
|
|
memcpy(iso->data_buf.kvirt + guard_off,
|
|
iso->data_buf.kvirt,
|
|
tail_len);
|
|
}
|
|
|
|
recv->dma_offset -= recv->buf_stride*recv->nblocks;
|
|
}
|
|
|
|
/* parse timestamp */
|
|
cycle = p[recv->dma_offset+0] | (p[recv->dma_offset+1]<<8);
|
|
cycle &= 0x1FFF;
|
|
|
|
/* advance to next packet */
|
|
recv->dma_offset += 4;
|
|
|
|
/* check for wrap-around */
|
|
if (recv->dma_offset >= recv->buf_stride*recv->nblocks) {
|
|
recv->dma_offset -= recv->buf_stride*recv->nblocks;
|
|
}
|
|
|
|
hpsb_iso_packet_received(iso, offset, len, total_len, cycle, channel, tag, sy);
|
|
}
|
|
|
|
if (wake)
|
|
hpsb_iso_wake(iso);
|
|
}
|
|
|
|
static void ohci_iso_recv_bufferfill_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv)
|
|
{
|
|
int loop;
|
|
struct ti_ohci *ohci = recv->ohci;
|
|
|
|
/* loop over all blocks */
|
|
for (loop = 0; loop < recv->nblocks; loop++) {
|
|
|
|
/* check block_dma to see if it's done */
|
|
struct dma_cmd *im = &recv->block[recv->block_dma];
|
|
|
|
/* check the DMA descriptor for new writes to xferStatus */
|
|
u16 xferstatus = le32_to_cpu(im->status) >> 16;
|
|
|
|
/* rescount is the number of bytes *remaining to be written* in the block */
|
|
u16 rescount = le32_to_cpu(im->status) & 0xFFFF;
|
|
|
|
unsigned char event = xferstatus & 0x1F;
|
|
|
|
if (!event) {
|
|
/* nothing has happened to this block yet */
|
|
break;
|
|
}
|
|
|
|
if (event != 0x11) {
|
|
atomic_inc(&iso->overflows);
|
|
PRINT(KERN_ERR,
|
|
"IR DMA error - OHCI error code 0x%02x\n", event);
|
|
}
|
|
|
|
if (rescount != 0) {
|
|
/* the card is still writing to this block;
|
|
we can't touch it until it's done */
|
|
break;
|
|
}
|
|
|
|
/* OK, the block is finished... */
|
|
|
|
/* sync our view of the block */
|
|
dma_region_sync_for_cpu(&iso->data_buf, recv->block_dma*recv->buf_stride, recv->buf_stride);
|
|
|
|
/* reset the DMA descriptor */
|
|
im->status = recv->buf_stride;
|
|
|
|
/* advance block_dma */
|
|
recv->block_dma = (recv->block_dma + 1) % recv->nblocks;
|
|
|
|
if ((recv->block_dma+1) % recv->nblocks == recv->block_reader) {
|
|
atomic_inc(&iso->overflows);
|
|
DBGMSG("ISO reception overflow - "
|
|
"ran out of DMA blocks");
|
|
}
|
|
}
|
|
|
|
/* parse any packets that have arrived */
|
|
ohci_iso_recv_bufferfill_parse(iso, recv);
|
|
}
|
|
|
|
static void ohci_iso_recv_packetperbuf_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv)
|
|
{
|
|
int count;
|
|
int wake = 0;
|
|
struct ti_ohci *ohci = recv->ohci;
|
|
|
|
/* loop over the entire buffer */
|
|
for (count = 0; count < recv->nblocks; count++) {
|
|
u32 packet_len = 0;
|
|
|
|
/* pointer to the DMA descriptor */
|
|
struct dma_cmd *il = ((struct dma_cmd*) recv->prog.kvirt) + iso->pkt_dma;
|
|
|
|
/* check the DMA descriptor for new writes to xferStatus */
|
|
u16 xferstatus = le32_to_cpu(il->status) >> 16;
|
|
u16 rescount = le32_to_cpu(il->status) & 0xFFFF;
|
|
|
|
unsigned char event = xferstatus & 0x1F;
|
|
|
|
if (!event) {
|
|
/* this packet hasn't come in yet; we are done for now */
|
|
goto out;
|
|
}
|
|
|
|
if (event == 0x11) {
|
|
/* packet received successfully! */
|
|
|
|
/* rescount is the number of bytes *remaining* in the packet buffer,
|
|
after the packet was written */
|
|
packet_len = recv->buf_stride - rescount;
|
|
|
|
} else if (event == 0x02) {
|
|
PRINT(KERN_ERR, "IR DMA error - packet too long for buffer\n");
|
|
} else if (event) {
|
|
PRINT(KERN_ERR, "IR DMA error - OHCI error code 0x%02x\n", event);
|
|
}
|
|
|
|
/* sync our view of the buffer */
|
|
dma_region_sync_for_cpu(&iso->data_buf, iso->pkt_dma * recv->buf_stride, recv->buf_stride);
|
|
|
|
/* record the per-packet info */
|
|
{
|
|
/* iso header is 8 bytes ahead of the data payload */
|
|
unsigned char *hdr;
|
|
|
|
unsigned int offset;
|
|
unsigned short cycle;
|
|
unsigned char channel, tag, sy;
|
|
|
|
offset = iso->pkt_dma * recv->buf_stride;
|
|
hdr = iso->data_buf.kvirt + offset;
|
|
|
|
/* skip iso header */
|
|
offset += 8;
|
|
packet_len -= 8;
|
|
|
|
cycle = (hdr[0] | (hdr[1] << 8)) & 0x1FFF;
|
|
channel = hdr[5] & 0x3F;
|
|
tag = hdr[5] >> 6;
|
|
sy = hdr[4] & 0xF;
|
|
|
|
hpsb_iso_packet_received(iso, offset, packet_len,
|
|
recv->buf_stride, cycle, channel, tag, sy);
|
|
}
|
|
|
|
/* reset the DMA descriptor */
|
|
il->status = recv->buf_stride;
|
|
|
|
wake = 1;
|
|
recv->block_dma = iso->pkt_dma;
|
|
}
|
|
|
|
out:
|
|
if (wake)
|
|
hpsb_iso_wake(iso);
|
|
}
|
|
|
|
static void ohci_iso_recv_task(unsigned long data)
|
|
{
|
|
struct hpsb_iso *iso = (struct hpsb_iso*) data;
|
|
struct ohci_iso_recv *recv = iso->hostdata;
|
|
|
|
if (recv->dma_mode == BUFFER_FILL_MODE)
|
|
ohci_iso_recv_bufferfill_task(iso, recv);
|
|
else
|
|
ohci_iso_recv_packetperbuf_task(iso, recv);
|
|
}
|
|
|
|
/***********************************
|
|
* rawiso ISO transmission *
|
|
***********************************/
|
|
|
|
struct ohci_iso_xmit {
|
|
struct ti_ohci *ohci;
|
|
struct dma_prog_region prog;
|
|
struct ohci1394_iso_tasklet task;
|
|
int task_active;
|
|
|
|
u32 ContextControlSet;
|
|
u32 ContextControlClear;
|
|
u32 CommandPtr;
|
|
};
|
|
|
|
/* transmission DMA program:
|
|
one OUTPUT_MORE_IMMEDIATE for the IT header
|
|
one OUTPUT_LAST for the buffer data */
|
|
|
|
struct iso_xmit_cmd {
|
|
struct dma_cmd output_more_immediate;
|
|
u8 iso_hdr[8];
|
|
u32 unused[2];
|
|
struct dma_cmd output_last;
|
|
};
|
|
|
|
static int ohci_iso_xmit_init(struct hpsb_iso *iso);
|
|
static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle);
|
|
static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso);
|
|
static void ohci_iso_xmit_task(unsigned long data);
|
|
|
|
static int ohci_iso_xmit_init(struct hpsb_iso *iso)
|
|
{
|
|
struct ohci_iso_xmit *xmit;
|
|
unsigned int prog_size;
|
|
int ctx;
|
|
int ret = -ENOMEM;
|
|
|
|
xmit = kmalloc(sizeof(*xmit), GFP_KERNEL);
|
|
if (!xmit)
|
|
return -ENOMEM;
|
|
|
|
iso->hostdata = xmit;
|
|
xmit->ohci = iso->host->hostdata;
|
|
xmit->task_active = 0;
|
|
|
|
dma_prog_region_init(&xmit->prog);
|
|
|
|
prog_size = sizeof(struct iso_xmit_cmd) * iso->buf_packets;
|
|
|
|
if (dma_prog_region_alloc(&xmit->prog, prog_size, xmit->ohci->dev))
|
|
goto err;
|
|
|
|
ohci1394_init_iso_tasklet(&xmit->task, OHCI_ISO_TRANSMIT,
|
|
ohci_iso_xmit_task, (unsigned long) iso);
|
|
|
|
if (ohci1394_register_iso_tasklet(xmit->ohci, &xmit->task) < 0) {
|
|
ret = -EBUSY;
|
|
goto err;
|
|
}
|
|
|
|
xmit->task_active = 1;
|
|
|
|
/* xmit context registers are spaced 16 bytes apart */
|
|
ctx = xmit->task.context;
|
|
xmit->ContextControlSet = OHCI1394_IsoXmitContextControlSet + 16 * ctx;
|
|
xmit->ContextControlClear = OHCI1394_IsoXmitContextControlClear + 16 * ctx;
|
|
xmit->CommandPtr = OHCI1394_IsoXmitCommandPtr + 16 * ctx;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
ohci_iso_xmit_shutdown(iso);
|
|
return ret;
|
|
}
|
|
|
|
static void ohci_iso_xmit_stop(struct hpsb_iso *iso)
|
|
{
|
|
struct ohci_iso_xmit *xmit = iso->hostdata;
|
|
struct ti_ohci *ohci = xmit->ohci;
|
|
|
|
/* disable interrupts */
|
|
reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskClear, 1 << xmit->task.context);
|
|
|
|
/* halt DMA */
|
|
if (ohci1394_stop_context(xmit->ohci, xmit->ContextControlClear, NULL)) {
|
|
/* XXX the DMA context will lock up if you try to send too much data! */
|
|
PRINT(KERN_ERR,
|
|
"you probably exceeded the OHCI card's bandwidth limit - "
|
|
"reload the module and reduce xmit bandwidth");
|
|
}
|
|
}
|
|
|
|
static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso)
|
|
{
|
|
struct ohci_iso_xmit *xmit = iso->hostdata;
|
|
|
|
if (xmit->task_active) {
|
|
ohci_iso_xmit_stop(iso);
|
|
ohci1394_unregister_iso_tasklet(xmit->ohci, &xmit->task);
|
|
xmit->task_active = 0;
|
|
}
|
|
|
|
dma_prog_region_free(&xmit->prog);
|
|
kfree(xmit);
|
|
iso->hostdata = NULL;
|
|
}
|
|
|
|
static void ohci_iso_xmit_task(unsigned long data)
|
|
{
|
|
struct hpsb_iso *iso = (struct hpsb_iso*) data;
|
|
struct ohci_iso_xmit *xmit = iso->hostdata;
|
|
struct ti_ohci *ohci = xmit->ohci;
|
|
int wake = 0;
|
|
int count;
|
|
|
|
/* check the whole buffer if necessary, starting at pkt_dma */
|
|
for (count = 0; count < iso->buf_packets; count++) {
|
|
int cycle;
|
|
|
|
/* DMA descriptor */
|
|
struct iso_xmit_cmd *cmd = dma_region_i(&xmit->prog, struct iso_xmit_cmd, iso->pkt_dma);
|
|
|
|
/* check for new writes to xferStatus */
|
|
u16 xferstatus = le32_to_cpu(cmd->output_last.status) >> 16;
|
|
u8 event = xferstatus & 0x1F;
|
|
|
|
if (!event) {
|
|
/* packet hasn't been sent yet; we are done for now */
|
|
break;
|
|
}
|
|
|
|
if (event != 0x11)
|
|
PRINT(KERN_ERR,
|
|
"IT DMA error - OHCI error code 0x%02x\n", event);
|
|
|
|
/* at least one packet went out, so wake up the writer */
|
|
wake = 1;
|
|
|
|
/* parse cycle */
|
|
cycle = le32_to_cpu(cmd->output_last.status) & 0x1FFF;
|
|
|
|
/* tell the subsystem the packet has gone out */
|
|
hpsb_iso_packet_sent(iso, cycle, event != 0x11);
|
|
|
|
/* reset the DMA descriptor for next time */
|
|
cmd->output_last.status = 0;
|
|
}
|
|
|
|
if (wake)
|
|
hpsb_iso_wake(iso);
|
|
}
|
|
|
|
static int ohci_iso_xmit_queue(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info)
|
|
{
|
|
struct ohci_iso_xmit *xmit = iso->hostdata;
|
|
struct ti_ohci *ohci = xmit->ohci;
|
|
|
|
int next_i, prev_i;
|
|
struct iso_xmit_cmd *next, *prev;
|
|
|
|
unsigned int offset;
|
|
unsigned short len;
|
|
unsigned char tag, sy;
|
|
|
|
/* check that the packet doesn't cross a page boundary
|
|
(we could allow this if we added OUTPUT_MORE descriptor support) */
|
|
if (cross_bound(info->offset, info->len)) {
|
|
PRINT(KERN_ERR,
|
|
"rawiso xmit: packet %u crosses a page boundary",
|
|
iso->first_packet);
|
|
return -EINVAL;
|
|
}
|
|
|
|
offset = info->offset;
|
|
len = info->len;
|
|
tag = info->tag;
|
|
sy = info->sy;
|
|
|
|
/* sync up the card's view of the buffer */
|
|
dma_region_sync_for_device(&iso->data_buf, offset, len);
|
|
|
|
/* append first_packet to the DMA chain */
|
|
/* by linking the previous descriptor to it */
|
|
/* (next will become the new end of the DMA chain) */
|
|
|
|
next_i = iso->first_packet;
|
|
prev_i = (next_i == 0) ? (iso->buf_packets - 1) : (next_i - 1);
|
|
|
|
next = dma_region_i(&xmit->prog, struct iso_xmit_cmd, next_i);
|
|
prev = dma_region_i(&xmit->prog, struct iso_xmit_cmd, prev_i);
|
|
|
|
/* set up the OUTPUT_MORE_IMMEDIATE descriptor */
|
|
memset(next, 0, sizeof(struct iso_xmit_cmd));
|
|
next->output_more_immediate.control = cpu_to_le32(0x02000008);
|
|
|
|
/* ISO packet header is embedded in the OUTPUT_MORE_IMMEDIATE */
|
|
|
|
/* tcode = 0xA, and sy */
|
|
next->iso_hdr[0] = 0xA0 | (sy & 0xF);
|
|
|
|
/* tag and channel number */
|
|
next->iso_hdr[1] = (tag << 6) | (iso->channel & 0x3F);
|
|
|
|
/* transmission speed */
|
|
next->iso_hdr[2] = iso->speed & 0x7;
|
|
|
|
/* payload size */
|
|
next->iso_hdr[6] = len & 0xFF;
|
|
next->iso_hdr[7] = len >> 8;
|
|
|
|
/* set up the OUTPUT_LAST */
|
|
next->output_last.control = cpu_to_le32(1 << 28);
|
|
next->output_last.control |= cpu_to_le32(1 << 27); /* update timeStamp */
|
|
next->output_last.control |= cpu_to_le32(3 << 20); /* want interrupt */
|
|
next->output_last.control |= cpu_to_le32(3 << 18); /* enable branch */
|
|
next->output_last.control |= cpu_to_le32(len);
|
|
|
|
/* payload bus address */
|
|
next->output_last.address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, offset));
|
|
|
|
/* leave branchAddress at zero for now */
|
|
|
|
/* re-write the previous DMA descriptor to chain to this one */
|
|
|
|
/* set prev branch address to point to next (Z=3) */
|
|
prev->output_last.branchAddress = cpu_to_le32(
|
|
dma_prog_region_offset_to_bus(&xmit->prog, sizeof(struct iso_xmit_cmd) * next_i) | 3);
|
|
|
|
/* disable interrupt, unless required by the IRQ interval */
|
|
if (prev_i % iso->irq_interval) {
|
|
prev->output_last.control &= cpu_to_le32(~(3 << 20)); /* no interrupt */
|
|
} else {
|
|
prev->output_last.control |= cpu_to_le32(3 << 20); /* enable interrupt */
|
|
}
|
|
|
|
wmb();
|
|
|
|
/* wake DMA in case it is sleeping */
|
|
reg_write(xmit->ohci, xmit->ContextControlSet, 1 << 12);
|
|
|
|
/* issue a dummy read of the cycle timer to force all PCI
|
|
writes to be posted immediately */
|
|
mb();
|
|
reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle)
|
|
{
|
|
struct ohci_iso_xmit *xmit = iso->hostdata;
|
|
struct ti_ohci *ohci = xmit->ohci;
|
|
|
|
/* clear out the control register */
|
|
reg_write(xmit->ohci, xmit->ContextControlClear, 0xFFFFFFFF);
|
|
wmb();
|
|
|
|
/* address and length of first descriptor block (Z=3) */
|
|
reg_write(xmit->ohci, xmit->CommandPtr,
|
|
dma_prog_region_offset_to_bus(&xmit->prog, iso->pkt_dma * sizeof(struct iso_xmit_cmd)) | 3);
|
|
|
|
/* cycle match */
|
|
if (cycle != -1) {
|
|
u32 start = cycle & 0x1FFF;
|
|
|
|
/* 'cycle' is only mod 8000, but we also need two 'seconds' bits -
|
|
just snarf them from the current time */
|
|
u32 seconds = reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer) >> 25;
|
|
|
|
/* advance one second to give some extra time for DMA to start */
|
|
seconds += 1;
|
|
|
|
start |= (seconds & 3) << 13;
|
|
|
|
reg_write(xmit->ohci, xmit->ContextControlSet, 0x80000000 | (start << 16));
|
|
}
|
|
|
|
/* enable interrupts */
|
|
reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskSet, 1 << xmit->task.context);
|
|
|
|
/* run */
|
|
reg_write(xmit->ohci, xmit->ContextControlSet, 0x8000);
|
|
mb();
|
|
|
|
/* wait 100 usec to give the card time to go active */
|
|
udelay(100);
|
|
|
|
/* check the RUN bit */
|
|
if (!(reg_read(xmit->ohci, xmit->ContextControlSet) & 0x8000)) {
|
|
PRINT(KERN_ERR, "Error starting IT DMA (ContextControl 0x%08x)\n",
|
|
reg_read(xmit->ohci, xmit->ContextControlSet));
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci_isoctl(struct hpsb_iso *iso, enum isoctl_cmd cmd, unsigned long arg)
|
|
{
|
|
|
|
switch(cmd) {
|
|
case XMIT_INIT:
|
|
return ohci_iso_xmit_init(iso);
|
|
case XMIT_START:
|
|
return ohci_iso_xmit_start(iso, arg);
|
|
case XMIT_STOP:
|
|
ohci_iso_xmit_stop(iso);
|
|
return 0;
|
|
case XMIT_QUEUE:
|
|
return ohci_iso_xmit_queue(iso, (struct hpsb_iso_packet_info*) arg);
|
|
case XMIT_SHUTDOWN:
|
|
ohci_iso_xmit_shutdown(iso);
|
|
return 0;
|
|
|
|
case RECV_INIT:
|
|
return ohci_iso_recv_init(iso);
|
|
case RECV_START: {
|
|
int *args = (int*) arg;
|
|
return ohci_iso_recv_start(iso, args[0], args[1], args[2]);
|
|
}
|
|
case RECV_STOP:
|
|
ohci_iso_recv_stop(iso);
|
|
return 0;
|
|
case RECV_RELEASE:
|
|
ohci_iso_recv_release(iso, (struct hpsb_iso_packet_info*) arg);
|
|
return 0;
|
|
case RECV_FLUSH:
|
|
ohci_iso_recv_task((unsigned long) iso);
|
|
return 0;
|
|
case RECV_SHUTDOWN:
|
|
ohci_iso_recv_shutdown(iso);
|
|
return 0;
|
|
case RECV_LISTEN_CHANNEL:
|
|
ohci_iso_recv_change_channel(iso, arg, 1);
|
|
return 0;
|
|
case RECV_UNLISTEN_CHANNEL:
|
|
ohci_iso_recv_change_channel(iso, arg, 0);
|
|
return 0;
|
|
case RECV_SET_CHANNEL_MASK:
|
|
ohci_iso_recv_set_channel_mask(iso, *((u64*) arg));
|
|
return 0;
|
|
|
|
default:
|
|
PRINT_G(KERN_ERR, "ohci_isoctl cmd %d not implemented yet",
|
|
cmd);
|
|
break;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/***************************************
|
|
* IEEE-1394 functionality section END *
|
|
***************************************/
|
|
|
|
|
|
/********************************************************
|
|
* Global stuff (interrupt handler, init/shutdown code) *
|
|
********************************************************/
|
|
|
|
static void dma_trm_reset(struct dma_trm_ctx *d)
|
|
{
|
|
unsigned long flags;
|
|
LIST_HEAD(packet_list);
|
|
struct ti_ohci *ohci = d->ohci;
|
|
struct hpsb_packet *packet, *ptmp;
|
|
|
|
ohci1394_stop_context(ohci, d->ctrlClear, NULL);
|
|
|
|
/* Lock the context, reset it and release it. Move the packets
|
|
* that were pending in the context to packet_list and free
|
|
* them after releasing the lock. */
|
|
|
|
spin_lock_irqsave(&d->lock, flags);
|
|
|
|
list_splice(&d->fifo_list, &packet_list);
|
|
list_splice(&d->pending_list, &packet_list);
|
|
INIT_LIST_HEAD(&d->fifo_list);
|
|
INIT_LIST_HEAD(&d->pending_list);
|
|
|
|
d->branchAddrPtr = NULL;
|
|
d->sent_ind = d->prg_ind;
|
|
d->free_prgs = d->num_desc;
|
|
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
|
|
|
if (list_empty(&packet_list))
|
|
return;
|
|
|
|
PRINT(KERN_INFO, "AT dma reset ctx=%d, aborting transmission", d->ctx);
|
|
|
|
/* Now process subsystem callbacks for the packets from this
|
|
* context. */
|
|
list_for_each_entry_safe(packet, ptmp, &packet_list, driver_list) {
|
|
list_del_init(&packet->driver_list);
|
|
hpsb_packet_sent(ohci->host, packet, ACKX_ABORTED);
|
|
}
|
|
}
|
|
|
|
static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci,
|
|
quadlet_t rx_event,
|
|
quadlet_t tx_event)
|
|
{
|
|
struct ohci1394_iso_tasklet *t;
|
|
unsigned long mask;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
|
|
|
|
list_for_each_entry(t, &ohci->iso_tasklet_list, link) {
|
|
mask = 1 << t->context;
|
|
|
|
if (t->type == OHCI_ISO_TRANSMIT && tx_event & mask)
|
|
tasklet_schedule(&t->tasklet);
|
|
else if (rx_event & mask)
|
|
tasklet_schedule(&t->tasklet);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
|
|
}
|
|
|
|
static irqreturn_t ohci_irq_handler(int irq, void *dev_id)
|
|
{
|
|
quadlet_t event, node_id;
|
|
struct ti_ohci *ohci = (struct ti_ohci *)dev_id;
|
|
struct hpsb_host *host = ohci->host;
|
|
int phyid = -1, isroot = 0;
|
|
unsigned long flags;
|
|
|
|
/* Read and clear the interrupt event register. Don't clear
|
|
* the busReset event, though. This is done when we get the
|
|
* selfIDComplete interrupt. */
|
|
spin_lock_irqsave(&ohci->event_lock, flags);
|
|
event = reg_read(ohci, OHCI1394_IntEventClear);
|
|
reg_write(ohci, OHCI1394_IntEventClear, event & ~OHCI1394_busReset);
|
|
spin_unlock_irqrestore(&ohci->event_lock, flags);
|
|
|
|
if (!event)
|
|
return IRQ_NONE;
|
|
|
|
/* If event is ~(u32)0 cardbus card was ejected. In this case
|
|
* we just return, and clean up in the ohci1394_pci_remove
|
|
* function. */
|
|
if (event == ~(u32) 0) {
|
|
DBGMSG("Device removed.");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
DBGMSG("IntEvent: %08x", event);
|
|
|
|
if (event & OHCI1394_unrecoverableError) {
|
|
int ctx;
|
|
PRINT(KERN_ERR, "Unrecoverable error!");
|
|
|
|
if (reg_read(ohci, OHCI1394_AsReqTrContextControlSet) & 0x800)
|
|
PRINT(KERN_ERR, "Async Req Tx Context died: "
|
|
"ctrl[%08x] cmdptr[%08x]",
|
|
reg_read(ohci, OHCI1394_AsReqTrContextControlSet),
|
|
reg_read(ohci, OHCI1394_AsReqTrCommandPtr));
|
|
|
|
if (reg_read(ohci, OHCI1394_AsRspTrContextControlSet) & 0x800)
|
|
PRINT(KERN_ERR, "Async Rsp Tx Context died: "
|
|
"ctrl[%08x] cmdptr[%08x]",
|
|
reg_read(ohci, OHCI1394_AsRspTrContextControlSet),
|
|
reg_read(ohci, OHCI1394_AsRspTrCommandPtr));
|
|
|
|
if (reg_read(ohci, OHCI1394_AsReqRcvContextControlSet) & 0x800)
|
|
PRINT(KERN_ERR, "Async Req Rcv Context died: "
|
|
"ctrl[%08x] cmdptr[%08x]",
|
|
reg_read(ohci, OHCI1394_AsReqRcvContextControlSet),
|
|
reg_read(ohci, OHCI1394_AsReqRcvCommandPtr));
|
|
|
|
if (reg_read(ohci, OHCI1394_AsRspRcvContextControlSet) & 0x800)
|
|
PRINT(KERN_ERR, "Async Rsp Rcv Context died: "
|
|
"ctrl[%08x] cmdptr[%08x]",
|
|
reg_read(ohci, OHCI1394_AsRspRcvContextControlSet),
|
|
reg_read(ohci, OHCI1394_AsRspRcvCommandPtr));
|
|
|
|
for (ctx = 0; ctx < ohci->nb_iso_xmit_ctx; ctx++) {
|
|
if (reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)) & 0x800)
|
|
PRINT(KERN_ERR, "Iso Xmit %d Context died: "
|
|
"ctrl[%08x] cmdptr[%08x]", ctx,
|
|
reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)),
|
|
reg_read(ohci, OHCI1394_IsoXmitCommandPtr + (16 * ctx)));
|
|
}
|
|
|
|
for (ctx = 0; ctx < ohci->nb_iso_rcv_ctx; ctx++) {
|
|
if (reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)) & 0x800)
|
|
PRINT(KERN_ERR, "Iso Recv %d Context died: "
|
|
"ctrl[%08x] cmdptr[%08x] match[%08x]", ctx,
|
|
reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)),
|
|
reg_read(ohci, OHCI1394_IsoRcvCommandPtr + (32 * ctx)),
|
|
reg_read(ohci, OHCI1394_IsoRcvContextMatch + (32 * ctx)));
|
|
}
|
|
|
|
event &= ~OHCI1394_unrecoverableError;
|
|
}
|
|
if (event & OHCI1394_postedWriteErr) {
|
|
PRINT(KERN_ERR, "physical posted write error");
|
|
/* no recovery strategy yet, had to involve protocol drivers */
|
|
event &= ~OHCI1394_postedWriteErr;
|
|
}
|
|
if (event & OHCI1394_cycleTooLong) {
|
|
if(printk_ratelimit())
|
|
PRINT(KERN_WARNING, "isochronous cycle too long");
|
|
else
|
|
DBGMSG("OHCI1394_cycleTooLong");
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_CycleMaster);
|
|
event &= ~OHCI1394_cycleTooLong;
|
|
}
|
|
if (event & OHCI1394_cycleInconsistent) {
|
|
/* We subscribe to the cycleInconsistent event only to
|
|
* clear the corresponding event bit... otherwise,
|
|
* isochronous cycleMatch DMA won't work. */
|
|
DBGMSG("OHCI1394_cycleInconsistent");
|
|
event &= ~OHCI1394_cycleInconsistent;
|
|
}
|
|
if (event & OHCI1394_busReset) {
|
|
/* The busReset event bit can't be cleared during the
|
|
* selfID phase, so we disable busReset interrupts, to
|
|
* avoid burying the cpu in interrupt requests. */
|
|
spin_lock_irqsave(&ohci->event_lock, flags);
|
|
reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_busReset);
|
|
|
|
if (ohci->check_busreset) {
|
|
int loop_count = 0;
|
|
|
|
udelay(10);
|
|
|
|
while (reg_read(ohci, OHCI1394_IntEventSet) & OHCI1394_busReset) {
|
|
reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
|
|
|
|
spin_unlock_irqrestore(&ohci->event_lock, flags);
|
|
udelay(10);
|
|
spin_lock_irqsave(&ohci->event_lock, flags);
|
|
|
|
/* The loop counter check is to prevent the driver
|
|
* from remaining in this state forever. For the
|
|
* initial bus reset, the loop continues for ever
|
|
* and the system hangs, until some device is plugged-in
|
|
* or out manually into a port! The forced reset seems
|
|
* to solve this problem. This mainly effects nForce2. */
|
|
if (loop_count > 10000) {
|
|
ohci_devctl(host, RESET_BUS, LONG_RESET);
|
|
DBGMSG("Detected bus-reset loop. Forced a bus reset!");
|
|
loop_count = 0;
|
|
}
|
|
|
|
loop_count++;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&ohci->event_lock, flags);
|
|
if (!host->in_bus_reset) {
|
|
DBGMSG("irq_handler: Bus reset requested");
|
|
|
|
/* Subsystem call */
|
|
hpsb_bus_reset(ohci->host);
|
|
}
|
|
event &= ~OHCI1394_busReset;
|
|
}
|
|
if (event & OHCI1394_reqTxComplete) {
|
|
struct dma_trm_ctx *d = &ohci->at_req_context;
|
|
DBGMSG("Got reqTxComplete interrupt "
|
|
"status=0x%08X", reg_read(ohci, d->ctrlSet));
|
|
if (reg_read(ohci, d->ctrlSet) & 0x800)
|
|
ohci1394_stop_context(ohci, d->ctrlClear,
|
|
"reqTxComplete");
|
|
else
|
|
dma_trm_tasklet((unsigned long)d);
|
|
//tasklet_schedule(&d->task);
|
|
event &= ~OHCI1394_reqTxComplete;
|
|
}
|
|
if (event & OHCI1394_respTxComplete) {
|
|
struct dma_trm_ctx *d = &ohci->at_resp_context;
|
|
DBGMSG("Got respTxComplete interrupt "
|
|
"status=0x%08X", reg_read(ohci, d->ctrlSet));
|
|
if (reg_read(ohci, d->ctrlSet) & 0x800)
|
|
ohci1394_stop_context(ohci, d->ctrlClear,
|
|
"respTxComplete");
|
|
else
|
|
tasklet_schedule(&d->task);
|
|
event &= ~OHCI1394_respTxComplete;
|
|
}
|
|
if (event & OHCI1394_RQPkt) {
|
|
struct dma_rcv_ctx *d = &ohci->ar_req_context;
|
|
DBGMSG("Got RQPkt interrupt status=0x%08X",
|
|
reg_read(ohci, d->ctrlSet));
|
|
if (reg_read(ohci, d->ctrlSet) & 0x800)
|
|
ohci1394_stop_context(ohci, d->ctrlClear, "RQPkt");
|
|
else
|
|
tasklet_schedule(&d->task);
|
|
event &= ~OHCI1394_RQPkt;
|
|
}
|
|
if (event & OHCI1394_RSPkt) {
|
|
struct dma_rcv_ctx *d = &ohci->ar_resp_context;
|
|
DBGMSG("Got RSPkt interrupt status=0x%08X",
|
|
reg_read(ohci, d->ctrlSet));
|
|
if (reg_read(ohci, d->ctrlSet) & 0x800)
|
|
ohci1394_stop_context(ohci, d->ctrlClear, "RSPkt");
|
|
else
|
|
tasklet_schedule(&d->task);
|
|
event &= ~OHCI1394_RSPkt;
|
|
}
|
|
if (event & OHCI1394_isochRx) {
|
|
quadlet_t rx_event;
|
|
|
|
rx_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, rx_event);
|
|
ohci_schedule_iso_tasklets(ohci, rx_event, 0);
|
|
event &= ~OHCI1394_isochRx;
|
|
}
|
|
if (event & OHCI1394_isochTx) {
|
|
quadlet_t tx_event;
|
|
|
|
tx_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, tx_event);
|
|
ohci_schedule_iso_tasklets(ohci, 0, tx_event);
|
|
event &= ~OHCI1394_isochTx;
|
|
}
|
|
if (event & OHCI1394_selfIDComplete) {
|
|
if (host->in_bus_reset) {
|
|
node_id = reg_read(ohci, OHCI1394_NodeID);
|
|
|
|
if (!(node_id & 0x80000000)) {
|
|
PRINT(KERN_ERR,
|
|
"SelfID received, but NodeID invalid "
|
|
"(probably new bus reset occurred): %08X",
|
|
node_id);
|
|
goto selfid_not_valid;
|
|
}
|
|
|
|
phyid = node_id & 0x0000003f;
|
|
isroot = (node_id & 0x40000000) != 0;
|
|
|
|
DBGMSG("SelfID interrupt received "
|
|
"(phyid %d, %s)", phyid,
|
|
(isroot ? "root" : "not root"));
|
|
|
|
handle_selfid(ohci, host, phyid, isroot);
|
|
|
|
/* Clear the bus reset event and re-enable the
|
|
* busReset interrupt. */
|
|
spin_lock_irqsave(&ohci->event_lock, flags);
|
|
reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
|
|
reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
|
|
spin_unlock_irqrestore(&ohci->event_lock, flags);
|
|
|
|
/* Turn on phys dma reception.
|
|
*
|
|
* TODO: Enable some sort of filtering management.
|
|
*/
|
|
if (phys_dma) {
|
|
reg_write(ohci, OHCI1394_PhyReqFilterHiSet,
|
|
0xffffffff);
|
|
reg_write(ohci, OHCI1394_PhyReqFilterLoSet,
|
|
0xffffffff);
|
|
}
|
|
|
|
DBGMSG("PhyReqFilter=%08x%08x",
|
|
reg_read(ohci, OHCI1394_PhyReqFilterHiSet),
|
|
reg_read(ohci, OHCI1394_PhyReqFilterLoSet));
|
|
|
|
hpsb_selfid_complete(host, phyid, isroot);
|
|
} else
|
|
PRINT(KERN_ERR,
|
|
"SelfID received outside of bus reset sequence");
|
|
|
|
selfid_not_valid:
|
|
event &= ~OHCI1394_selfIDComplete;
|
|
}
|
|
|
|
/* Make sure we handle everything, just in case we accidentally
|
|
* enabled an interrupt that we didn't write a handler for. */
|
|
if (event)
|
|
PRINT(KERN_ERR, "Unhandled interrupt(s) 0x%08x",
|
|
event);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Put the buffer back into the dma context */
|
|
static void insert_dma_buffer(struct dma_rcv_ctx *d, int idx)
|
|
{
|
|
struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
|
|
DBGMSG("Inserting dma buf ctx=%d idx=%d", d->ctx, idx);
|
|
|
|
d->prg_cpu[idx]->status = cpu_to_le32(d->buf_size);
|
|
d->prg_cpu[idx]->branchAddress &= le32_to_cpu(0xfffffff0);
|
|
idx = (idx + d->num_desc - 1 ) % d->num_desc;
|
|
d->prg_cpu[idx]->branchAddress |= le32_to_cpu(0x00000001);
|
|
|
|
/* To avoid a race, ensure 1394 interface hardware sees the inserted
|
|
* context program descriptors before it sees the wakeup bit set. */
|
|
wmb();
|
|
|
|
/* wake up the dma context if necessary */
|
|
if (!(reg_read(ohci, d->ctrlSet) & 0x400)) {
|
|
PRINT(KERN_INFO,
|
|
"Waking dma ctx=%d ... processing is probably too slow",
|
|
d->ctx);
|
|
}
|
|
|
|
/* do this always, to avoid race condition */
|
|
reg_write(ohci, d->ctrlSet, 0x1000);
|
|
}
|
|
|
|
#define cond_le32_to_cpu(data, noswap) \
|
|
(noswap ? data : le32_to_cpu(data))
|
|
|
|
static const int TCODE_SIZE[16] = {20, 0, 16, -1, 16, 20, 20, 0,
|
|
-1, 0, -1, 0, -1, -1, 16, -1};
|
|
|
|
/*
|
|
* Determine the length of a packet in the buffer
|
|
* Optimization suggested by Pascal Drolet <pascal.drolet@informission.ca>
|
|
*/
|
|
static inline int packet_length(struct dma_rcv_ctx *d, int idx,
|
|
quadlet_t *buf_ptr, int offset,
|
|
unsigned char tcode, int noswap)
|
|
{
|
|
int length = -1;
|
|
|
|
if (d->type == DMA_CTX_ASYNC_REQ || d->type == DMA_CTX_ASYNC_RESP) {
|
|
length = TCODE_SIZE[tcode];
|
|
if (length == 0) {
|
|
if (offset + 12 >= d->buf_size) {
|
|
length = (cond_le32_to_cpu(d->buf_cpu[(idx + 1) % d->num_desc]
|
|
[3 - ((d->buf_size - offset) >> 2)], noswap) >> 16);
|
|
} else {
|
|
length = (cond_le32_to_cpu(buf_ptr[3], noswap) >> 16);
|
|
}
|
|
length += 20;
|
|
}
|
|
} else if (d->type == DMA_CTX_ISO) {
|
|
/* Assumption: buffer fill mode with header/trailer */
|
|
length = (cond_le32_to_cpu(buf_ptr[0], noswap) >> 16) + 8;
|
|
}
|
|
|
|
if (length > 0 && length % 4)
|
|
length += 4 - (length % 4);
|
|
|
|
return length;
|
|
}
|
|
|
|
/* Tasklet that processes dma receive buffers */
|
|
static void dma_rcv_tasklet (unsigned long data)
|
|
{
|
|
struct dma_rcv_ctx *d = (struct dma_rcv_ctx*)data;
|
|
struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
|
|
unsigned int split_left, idx, offset, rescount;
|
|
unsigned char tcode;
|
|
int length, bytes_left, ack;
|
|
unsigned long flags;
|
|
quadlet_t *buf_ptr;
|
|
char *split_ptr;
|
|
char msg[256];
|
|
|
|
spin_lock_irqsave(&d->lock, flags);
|
|
|
|
idx = d->buf_ind;
|
|
offset = d->buf_offset;
|
|
buf_ptr = d->buf_cpu[idx] + offset/4;
|
|
|
|
rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff;
|
|
bytes_left = d->buf_size - rescount - offset;
|
|
|
|
while (bytes_left > 0) {
|
|
tcode = (cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming) >> 4) & 0xf;
|
|
|
|
/* packet_length() will return < 4 for an error */
|
|
length = packet_length(d, idx, buf_ptr, offset, tcode, ohci->no_swap_incoming);
|
|
|
|
if (length < 4) { /* something is wrong */
|
|
sprintf(msg,"Unexpected tcode 0x%x(0x%08x) in AR ctx=%d, length=%d",
|
|
tcode, cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming),
|
|
d->ctx, length);
|
|
ohci1394_stop_context(ohci, d->ctrlClear, msg);
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* The first case is where we have a packet that crosses
|
|
* over more than one descriptor. The next case is where
|
|
* it's all in the first descriptor. */
|
|
if ((offset + length) > d->buf_size) {
|
|
DBGMSG("Split packet rcv'd");
|
|
if (length > d->split_buf_size) {
|
|
ohci1394_stop_context(ohci, d->ctrlClear,
|
|
"Split packet size exceeded");
|
|
d->buf_ind = idx;
|
|
d->buf_offset = offset;
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
|
return;
|
|
}
|
|
|
|
if (le32_to_cpu(d->prg_cpu[(idx+1)%d->num_desc]->status)
|
|
== d->buf_size) {
|
|
/* Other part of packet not written yet.
|
|
* this should never happen I think
|
|
* anyway we'll get it on the next call. */
|
|
PRINT(KERN_INFO,
|
|
"Got only half a packet!");
|
|
d->buf_ind = idx;
|
|
d->buf_offset = offset;
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
|
return;
|
|
}
|
|
|
|
split_left = length;
|
|
split_ptr = (char *)d->spb;
|
|
memcpy(split_ptr,buf_ptr,d->buf_size-offset);
|
|
split_left -= d->buf_size-offset;
|
|
split_ptr += d->buf_size-offset;
|
|
insert_dma_buffer(d, idx);
|
|
idx = (idx+1) % d->num_desc;
|
|
buf_ptr = d->buf_cpu[idx];
|
|
offset=0;
|
|
|
|
while (split_left >= d->buf_size) {
|
|
memcpy(split_ptr,buf_ptr,d->buf_size);
|
|
split_ptr += d->buf_size;
|
|
split_left -= d->buf_size;
|
|
insert_dma_buffer(d, idx);
|
|
idx = (idx+1) % d->num_desc;
|
|
buf_ptr = d->buf_cpu[idx];
|
|
}
|
|
|
|
if (split_left > 0) {
|
|
memcpy(split_ptr, buf_ptr, split_left);
|
|
offset = split_left;
|
|
buf_ptr += offset/4;
|
|
}
|
|
} else {
|
|
DBGMSG("Single packet rcv'd");
|
|
memcpy(d->spb, buf_ptr, length);
|
|
offset += length;
|
|
buf_ptr += length/4;
|
|
if (offset==d->buf_size) {
|
|
insert_dma_buffer(d, idx);
|
|
idx = (idx+1) % d->num_desc;
|
|
buf_ptr = d->buf_cpu[idx];
|
|
offset=0;
|
|
}
|
|
}
|
|
|
|
/* We get one phy packet to the async descriptor for each
|
|
* bus reset. We always ignore it. */
|
|
if (tcode != OHCI1394_TCODE_PHY) {
|
|
if (!ohci->no_swap_incoming)
|
|
header_le32_to_cpu(d->spb, tcode);
|
|
DBGMSG("Packet received from node"
|
|
" %d ack=0x%02X spd=%d tcode=0x%X"
|
|
" length=%d ctx=%d tlabel=%d",
|
|
(d->spb[1]>>16)&0x3f,
|
|
(cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f,
|
|
(cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>21)&0x3,
|
|
tcode, length, d->ctx,
|
|
(d->spb[0]>>10)&0x3f);
|
|
|
|
ack = (((cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f)
|
|
== 0x11) ? 1 : 0;
|
|
|
|
hpsb_packet_received(ohci->host, d->spb,
|
|
length-4, ack);
|
|
}
|
|
#ifdef OHCI1394_DEBUG
|
|
else
|
|
PRINT (KERN_DEBUG, "Got phy packet ctx=%d ... discarded",
|
|
d->ctx);
|
|
#endif
|
|
|
|
rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff;
|
|
|
|
bytes_left = d->buf_size - rescount - offset;
|
|
|
|
}
|
|
|
|
d->buf_ind = idx;
|
|
d->buf_offset = offset;
|
|
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
|
}
|
|
|
|
/* Bottom half that processes sent packets */
|
|
static void dma_trm_tasklet (unsigned long data)
|
|
{
|
|
struct dma_trm_ctx *d = (struct dma_trm_ctx*)data;
|
|
struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
|
|
struct hpsb_packet *packet, *ptmp;
|
|
unsigned long flags;
|
|
u32 status, ack;
|
|
size_t datasize;
|
|
|
|
spin_lock_irqsave(&d->lock, flags);
|
|
|
|
list_for_each_entry_safe(packet, ptmp, &d->fifo_list, driver_list) {
|
|
datasize = packet->data_size;
|
|
if (datasize && packet->type != hpsb_raw)
|
|
status = le32_to_cpu(
|
|
d->prg_cpu[d->sent_ind]->end.status) >> 16;
|
|
else
|
|
status = le32_to_cpu(
|
|
d->prg_cpu[d->sent_ind]->begin.status) >> 16;
|
|
|
|
if (status == 0)
|
|
/* this packet hasn't been sent yet*/
|
|
break;
|
|
|
|
#ifdef OHCI1394_DEBUG
|
|
if (datasize)
|
|
if (((le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf) == 0xa)
|
|
DBGMSG("Stream packet sent to channel %d tcode=0x%X "
|
|
"ack=0x%X spd=%d dataLength=%d ctx=%d",
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>8)&0x3f,
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf,
|
|
status&0x1f, (status>>5)&0x3,
|
|
le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16,
|
|
d->ctx);
|
|
else
|
|
DBGMSG("Packet sent to node %d tcode=0x%X tLabel="
|
|
"%d ack=0x%X spd=%d dataLength=%d ctx=%d",
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16)&0x3f,
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf,
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>10)&0x3f,
|
|
status&0x1f, (status>>5)&0x3,
|
|
le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3])>>16,
|
|
d->ctx);
|
|
else
|
|
DBGMSG("Packet sent to node %d tcode=0x%X tLabel="
|
|
"%d ack=0x%X spd=%d data=0x%08X ctx=%d",
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])
|
|
>>16)&0x3f,
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])
|
|
>>4)&0xf,
|
|
(le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])
|
|
>>10)&0x3f,
|
|
status&0x1f, (status>>5)&0x3,
|
|
le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3]),
|
|
d->ctx);
|
|
#endif
|
|
|
|
if (status & 0x10) {
|
|
ack = status & 0xf;
|
|
} else {
|
|
switch (status & 0x1f) {
|
|
case EVT_NO_STATUS: /* that should never happen */
|
|
case EVT_RESERVED_A: /* that should never happen */
|
|
case EVT_LONG_PACKET: /* that should never happen */
|
|
PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
case EVT_MISSING_ACK:
|
|
ack = ACKX_TIMEOUT;
|
|
break;
|
|
case EVT_UNDERRUN:
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
case EVT_OVERRUN: /* that should never happen */
|
|
PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
case EVT_DESCRIPTOR_READ:
|
|
case EVT_DATA_READ:
|
|
case EVT_DATA_WRITE:
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
case EVT_BUS_RESET: /* that should never happen */
|
|
PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
case EVT_TIMEOUT:
|
|
ack = ACKX_TIMEOUT;
|
|
break;
|
|
case EVT_TCODE_ERR:
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
case EVT_RESERVED_B: /* that should never happen */
|
|
case EVT_RESERVED_C: /* that should never happen */
|
|
PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
case EVT_UNKNOWN:
|
|
case EVT_FLUSHED:
|
|
ack = ACKX_SEND_ERROR;
|
|
break;
|
|
default:
|
|
PRINT(KERN_ERR, "Unhandled OHCI evt_* error 0x%x", status & 0x1f);
|
|
ack = ACKX_SEND_ERROR;
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
list_del_init(&packet->driver_list);
|
|
hpsb_packet_sent(ohci->host, packet, ack);
|
|
|
|
if (datasize)
|
|
pci_unmap_single(ohci->dev,
|
|
cpu_to_le32(d->prg_cpu[d->sent_ind]->end.address),
|
|
datasize, PCI_DMA_TODEVICE);
|
|
|
|
d->sent_ind = (d->sent_ind+1)%d->num_desc;
|
|
d->free_prgs++;
|
|
}
|
|
|
|
dma_trm_flush(ohci, d);
|
|
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
|
}
|
|
|
|
static void free_dma_rcv_ctx(struct dma_rcv_ctx *d)
|
|
{
|
|
int i;
|
|
struct ti_ohci *ohci = d->ohci;
|
|
|
|
if (ohci == NULL)
|
|
return;
|
|
|
|
DBGMSG("Freeing dma_rcv_ctx %d", d->ctx);
|
|
|
|
if (d->buf_cpu) {
|
|
for (i=0; i<d->num_desc; i++)
|
|
if (d->buf_cpu[i] && d->buf_bus[i])
|
|
pci_free_consistent(
|
|
ohci->dev, d->buf_size,
|
|
d->buf_cpu[i], d->buf_bus[i]);
|
|
kfree(d->buf_cpu);
|
|
kfree(d->buf_bus);
|
|
}
|
|
if (d->prg_cpu) {
|
|
for (i=0; i<d->num_desc; i++)
|
|
if (d->prg_cpu[i] && d->prg_bus[i])
|
|
pci_pool_free(d->prg_pool, d->prg_cpu[i],
|
|
d->prg_bus[i]);
|
|
pci_pool_destroy(d->prg_pool);
|
|
kfree(d->prg_cpu);
|
|
kfree(d->prg_bus);
|
|
}
|
|
kfree(d->spb);
|
|
|
|
/* Mark this context as freed. */
|
|
d->ohci = NULL;
|
|
}
|
|
|
|
static int
|
|
alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
|
|
enum context_type type, int ctx, int num_desc,
|
|
int buf_size, int split_buf_size, int context_base)
|
|
{
|
|
int i, len;
|
|
static int num_allocs;
|
|
static char pool_name[20];
|
|
|
|
d->ohci = ohci;
|
|
d->type = type;
|
|
d->ctx = ctx;
|
|
|
|
d->num_desc = num_desc;
|
|
d->buf_size = buf_size;
|
|
d->split_buf_size = split_buf_size;
|
|
|
|
d->ctrlSet = 0;
|
|
d->ctrlClear = 0;
|
|
d->cmdPtr = 0;
|
|
|
|
d->buf_cpu = kzalloc(d->num_desc * sizeof(*d->buf_cpu), GFP_ATOMIC);
|
|
d->buf_bus = kzalloc(d->num_desc * sizeof(*d->buf_bus), GFP_ATOMIC);
|
|
|
|
if (d->buf_cpu == NULL || d->buf_bus == NULL) {
|
|
PRINT(KERN_ERR, "Failed to allocate dma buffer");
|
|
free_dma_rcv_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_ATOMIC);
|
|
d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_ATOMIC);
|
|
|
|
if (d->prg_cpu == NULL || d->prg_bus == NULL) {
|
|
PRINT(KERN_ERR, "Failed to allocate dma prg");
|
|
free_dma_rcv_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
d->spb = kmalloc(d->split_buf_size, GFP_ATOMIC);
|
|
|
|
if (d->spb == NULL) {
|
|
PRINT(KERN_ERR, "Failed to allocate split buffer");
|
|
free_dma_rcv_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
len = sprintf(pool_name, "ohci1394_rcv_prg");
|
|
sprintf(pool_name+len, "%d", num_allocs);
|
|
d->prg_pool = pci_pool_create(pool_name, ohci->dev,
|
|
sizeof(struct dma_cmd), 4, 0);
|
|
if(d->prg_pool == NULL)
|
|
{
|
|
PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name);
|
|
free_dma_rcv_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
num_allocs++;
|
|
|
|
for (i=0; i<d->num_desc; i++) {
|
|
d->buf_cpu[i] = pci_alloc_consistent(ohci->dev,
|
|
d->buf_size,
|
|
d->buf_bus+i);
|
|
|
|
if (d->buf_cpu[i] != NULL) {
|
|
memset(d->buf_cpu[i], 0, d->buf_size);
|
|
} else {
|
|
PRINT(KERN_ERR,
|
|
"Failed to allocate dma buffer");
|
|
free_dma_rcv_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i);
|
|
|
|
if (d->prg_cpu[i] != NULL) {
|
|
memset(d->prg_cpu[i], 0, sizeof(struct dma_cmd));
|
|
} else {
|
|
PRINT(KERN_ERR,
|
|
"Failed to allocate dma prg");
|
|
free_dma_rcv_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
spin_lock_init(&d->lock);
|
|
|
|
d->ctrlSet = context_base + OHCI1394_ContextControlSet;
|
|
d->ctrlClear = context_base + OHCI1394_ContextControlClear;
|
|
d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
|
|
|
|
tasklet_init(&d->task, dma_rcv_tasklet, (unsigned long) d);
|
|
return 0;
|
|
}
|
|
|
|
static void free_dma_trm_ctx(struct dma_trm_ctx *d)
|
|
{
|
|
int i;
|
|
struct ti_ohci *ohci = d->ohci;
|
|
|
|
if (ohci == NULL)
|
|
return;
|
|
|
|
DBGMSG("Freeing dma_trm_ctx %d", d->ctx);
|
|
|
|
if (d->prg_cpu) {
|
|
for (i=0; i<d->num_desc; i++)
|
|
if (d->prg_cpu[i] && d->prg_bus[i])
|
|
pci_pool_free(d->prg_pool, d->prg_cpu[i],
|
|
d->prg_bus[i]);
|
|
pci_pool_destroy(d->prg_pool);
|
|
kfree(d->prg_cpu);
|
|
kfree(d->prg_bus);
|
|
}
|
|
|
|
/* Mark this context as freed. */
|
|
d->ohci = NULL;
|
|
}
|
|
|
|
static int
|
|
alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
|
|
enum context_type type, int ctx, int num_desc,
|
|
int context_base)
|
|
{
|
|
int i, len;
|
|
static char pool_name[20];
|
|
static int num_allocs=0;
|
|
|
|
d->ohci = ohci;
|
|
d->type = type;
|
|
d->ctx = ctx;
|
|
d->num_desc = num_desc;
|
|
d->ctrlSet = 0;
|
|
d->ctrlClear = 0;
|
|
d->cmdPtr = 0;
|
|
|
|
d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_KERNEL);
|
|
d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_KERNEL);
|
|
|
|
if (d->prg_cpu == NULL || d->prg_bus == NULL) {
|
|
PRINT(KERN_ERR, "Failed to allocate at dma prg");
|
|
free_dma_trm_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
len = sprintf(pool_name, "ohci1394_trm_prg");
|
|
sprintf(pool_name+len, "%d", num_allocs);
|
|
d->prg_pool = pci_pool_create(pool_name, ohci->dev,
|
|
sizeof(struct at_dma_prg), 4, 0);
|
|
if (d->prg_pool == NULL) {
|
|
PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name);
|
|
free_dma_trm_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
num_allocs++;
|
|
|
|
for (i = 0; i < d->num_desc; i++) {
|
|
d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i);
|
|
|
|
if (d->prg_cpu[i] != NULL) {
|
|
memset(d->prg_cpu[i], 0, sizeof(struct at_dma_prg));
|
|
} else {
|
|
PRINT(KERN_ERR,
|
|
"Failed to allocate at dma prg");
|
|
free_dma_trm_ctx(d);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
spin_lock_init(&d->lock);
|
|
|
|
/* initialize tasklet */
|
|
d->ctrlSet = context_base + OHCI1394_ContextControlSet;
|
|
d->ctrlClear = context_base + OHCI1394_ContextControlClear;
|
|
d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
|
|
tasklet_init(&d->task, dma_trm_tasklet, (unsigned long)d);
|
|
return 0;
|
|
}
|
|
|
|
static void ohci_set_hw_config_rom(struct hpsb_host *host, quadlet_t *config_rom)
|
|
{
|
|
struct ti_ohci *ohci = host->hostdata;
|
|
|
|
reg_write(ohci, OHCI1394_ConfigROMhdr, be32_to_cpu(config_rom[0]));
|
|
reg_write(ohci, OHCI1394_BusOptions, be32_to_cpu(config_rom[2]));
|
|
|
|
memcpy(ohci->csr_config_rom_cpu, config_rom, OHCI_CONFIG_ROM_LEN);
|
|
}
|
|
|
|
|
|
static quadlet_t ohci_hw_csr_reg(struct hpsb_host *host, int reg,
|
|
quadlet_t data, quadlet_t compare)
|
|
{
|
|
struct ti_ohci *ohci = host->hostdata;
|
|
int i;
|
|
|
|
reg_write(ohci, OHCI1394_CSRData, data);
|
|
reg_write(ohci, OHCI1394_CSRCompareData, compare);
|
|
reg_write(ohci, OHCI1394_CSRControl, reg & 0x3);
|
|
|
|
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
|
|
if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000)
|
|
break;
|
|
|
|
mdelay(1);
|
|
}
|
|
|
|
return reg_read(ohci, OHCI1394_CSRData);
|
|
}
|
|
|
|
static struct hpsb_host_driver ohci1394_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = OHCI1394_DRIVER_NAME,
|
|
.set_hw_config_rom = ohci_set_hw_config_rom,
|
|
.transmit_packet = ohci_transmit,
|
|
.devctl = ohci_devctl,
|
|
.isoctl = ohci_isoctl,
|
|
.hw_csr_reg = ohci_hw_csr_reg,
|
|
};
|
|
|
|
/***********************************
|
|
* PCI Driver Interface functions *
|
|
***********************************/
|
|
|
|
#define FAIL(err, fmt, args...) \
|
|
do { \
|
|
PRINT_G(KERN_ERR, fmt , ## args); \
|
|
ohci1394_pci_remove(dev); \
|
|
return err; \
|
|
} while (0)
|
|
|
|
static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct hpsb_host *host;
|
|
struct ti_ohci *ohci; /* shortcut to currently handled device */
|
|
resource_size_t ohci_base;
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
/* Necessary on some machines if ohci1394 was loaded/ unloaded before */
|
|
if (machine_is(powermac)) {
|
|
struct device_node *ofn = pci_device_to_OF_node(dev);
|
|
|
|
if (ofn) {
|
|
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
|
|
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
|
|
}
|
|
}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
if (pci_enable_device(dev))
|
|
FAIL(-ENXIO, "Failed to enable OHCI hardware");
|
|
pci_set_master(dev);
|
|
|
|
host = hpsb_alloc_host(&ohci1394_driver, sizeof(struct ti_ohci), &dev->dev);
|
|
if (!host) FAIL(-ENOMEM, "Failed to allocate host structure");
|
|
|
|
ohci = host->hostdata;
|
|
ohci->dev = dev;
|
|
ohci->host = host;
|
|
ohci->init_state = OHCI_INIT_ALLOC_HOST;
|
|
host->pdev = dev;
|
|
pci_set_drvdata(dev, ohci);
|
|
|
|
/* We don't want hardware swapping */
|
|
pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
|
|
|
|
/* Some oddball Apple controllers do not order the selfid
|
|
* properly, so we make up for it here. */
|
|
#ifndef __LITTLE_ENDIAN
|
|
/* XXX: Need a better way to check this. I'm wondering if we can
|
|
* read the values of the OHCI1394_PCI_HCI_Control and the
|
|
* noByteSwapData registers to see if they were not cleared to
|
|
* zero. Should this work? Obviously it's not defined what these
|
|
* registers will read when they aren't supported. Bleh! */
|
|
if (dev->vendor == PCI_VENDOR_ID_APPLE &&
|
|
dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) {
|
|
ohci->no_swap_incoming = 1;
|
|
ohci->selfid_swap = 0;
|
|
} else
|
|
ohci->selfid_swap = 1;
|
|
#endif
|
|
|
|
|
|
#ifndef PCI_DEVICE_ID_NVIDIA_NFORCE2_FW
|
|
#define PCI_DEVICE_ID_NVIDIA_NFORCE2_FW 0x006e
|
|
#endif
|
|
|
|
/* These chipsets require a bit of extra care when checking after
|
|
* a busreset. */
|
|
if ((dev->vendor == PCI_VENDOR_ID_APPLE &&
|
|
dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) ||
|
|
(dev->vendor == PCI_VENDOR_ID_NVIDIA &&
|
|
dev->device == PCI_DEVICE_ID_NVIDIA_NFORCE2_FW))
|
|
ohci->check_busreset = 1;
|
|
|
|
/* We hardwire the MMIO length, since some CardBus adaptors
|
|
* fail to report the right length. Anyway, the ohci spec
|
|
* clearly says it's 2kb, so this shouldn't be a problem. */
|
|
ohci_base = pci_resource_start(dev, 0);
|
|
if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE)
|
|
PRINT(KERN_WARNING, "PCI resource length of 0x%llx too small!",
|
|
(unsigned long long)pci_resource_len(dev, 0));
|
|
|
|
if (!request_mem_region(ohci_base, OHCI1394_REGISTER_SIZE,
|
|
OHCI1394_DRIVER_NAME))
|
|
FAIL(-ENOMEM, "MMIO resource (0x%llx - 0x%llx) unavailable",
|
|
(unsigned long long)ohci_base,
|
|
(unsigned long long)ohci_base + OHCI1394_REGISTER_SIZE);
|
|
ohci->init_state = OHCI_INIT_HAVE_MEM_REGION;
|
|
|
|
ohci->registers = ioremap(ohci_base, OHCI1394_REGISTER_SIZE);
|
|
if (ohci->registers == NULL)
|
|
FAIL(-ENXIO, "Failed to remap registers - card not accessible");
|
|
ohci->init_state = OHCI_INIT_HAVE_IOMAPPING;
|
|
DBGMSG("Remapped memory spaces reg 0x%p", ohci->registers);
|
|
|
|
/* csr_config rom allocation */
|
|
ohci->csr_config_rom_cpu =
|
|
pci_alloc_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN,
|
|
&ohci->csr_config_rom_bus);
|
|
if (ohci->csr_config_rom_cpu == NULL)
|
|
FAIL(-ENOMEM, "Failed to allocate buffer config rom");
|
|
ohci->init_state = OHCI_INIT_HAVE_CONFIG_ROM_BUFFER;
|
|
|
|
/* self-id dma buffer allocation */
|
|
ohci->selfid_buf_cpu =
|
|
pci_alloc_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE,
|
|
&ohci->selfid_buf_bus);
|
|
if (ohci->selfid_buf_cpu == NULL)
|
|
FAIL(-ENOMEM, "Failed to allocate DMA buffer for self-id packets");
|
|
ohci->init_state = OHCI_INIT_HAVE_SELFID_BUFFER;
|
|
|
|
if ((unsigned long)ohci->selfid_buf_cpu & 0x1fff)
|
|
PRINT(KERN_INFO, "SelfID buffer %p is not aligned on "
|
|
"8Kb boundary... may cause problems on some CXD3222 chip",
|
|
ohci->selfid_buf_cpu);
|
|
|
|
/* No self-id errors at startup */
|
|
ohci->self_id_errors = 0;
|
|
|
|
ohci->init_state = OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE;
|
|
/* AR DMA request context allocation */
|
|
if (alloc_dma_rcv_ctx(ohci, &ohci->ar_req_context,
|
|
DMA_CTX_ASYNC_REQ, 0, AR_REQ_NUM_DESC,
|
|
AR_REQ_BUF_SIZE, AR_REQ_SPLIT_BUF_SIZE,
|
|
OHCI1394_AsReqRcvContextBase) < 0)
|
|
FAIL(-ENOMEM, "Failed to allocate AR Req context");
|
|
|
|
/* AR DMA response context allocation */
|
|
if (alloc_dma_rcv_ctx(ohci, &ohci->ar_resp_context,
|
|
DMA_CTX_ASYNC_RESP, 0, AR_RESP_NUM_DESC,
|
|
AR_RESP_BUF_SIZE, AR_RESP_SPLIT_BUF_SIZE,
|
|
OHCI1394_AsRspRcvContextBase) < 0)
|
|
FAIL(-ENOMEM, "Failed to allocate AR Resp context");
|
|
|
|
/* AT DMA request context */
|
|
if (alloc_dma_trm_ctx(ohci, &ohci->at_req_context,
|
|
DMA_CTX_ASYNC_REQ, 0, AT_REQ_NUM_DESC,
|
|
OHCI1394_AsReqTrContextBase) < 0)
|
|
FAIL(-ENOMEM, "Failed to allocate AT Req context");
|
|
|
|
/* AT DMA response context */
|
|
if (alloc_dma_trm_ctx(ohci, &ohci->at_resp_context,
|
|
DMA_CTX_ASYNC_RESP, 1, AT_RESP_NUM_DESC,
|
|
OHCI1394_AsRspTrContextBase) < 0)
|
|
FAIL(-ENOMEM, "Failed to allocate AT Resp context");
|
|
|
|
/* Start off with a soft reset, to clear everything to a sane
|
|
* state. */
|
|
ohci_soft_reset(ohci);
|
|
|
|
/* Now enable LPS, which we need in order to start accessing
|
|
* most of the registers. In fact, on some cards (ALI M5251),
|
|
* accessing registers in the SClk domain without LPS enabled
|
|
* will lock up the machine. Wait 50msec to make sure we have
|
|
* full link enabled. */
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
|
|
|
|
/* Disable and clear interrupts */
|
|
reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
|
|
|
|
mdelay(50);
|
|
|
|
/* Determine the number of available IR and IT contexts. */
|
|
ohci->nb_iso_rcv_ctx =
|
|
get_nb_iso_ctx(ohci, OHCI1394_IsoRecvIntMaskSet);
|
|
ohci->nb_iso_xmit_ctx =
|
|
get_nb_iso_ctx(ohci, OHCI1394_IsoXmitIntMaskSet);
|
|
|
|
/* Set the usage bits for non-existent contexts so they can't
|
|
* be allocated */
|
|
ohci->ir_ctx_usage = ~0 << ohci->nb_iso_rcv_ctx;
|
|
ohci->it_ctx_usage = ~0 << ohci->nb_iso_xmit_ctx;
|
|
|
|
INIT_LIST_HEAD(&ohci->iso_tasklet_list);
|
|
spin_lock_init(&ohci->iso_tasklet_list_lock);
|
|
ohci->ISO_channel_usage = 0;
|
|
spin_lock_init(&ohci->IR_channel_lock);
|
|
|
|
spin_lock_init(&ohci->event_lock);
|
|
|
|
/*
|
|
* interrupts are disabled, all right, but... due to IRQF_SHARED we
|
|
* might get called anyway. We'll see no event, of course, but
|
|
* we need to get to that "no event", so enough should be initialized
|
|
* by that point.
|
|
*/
|
|
if (request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED,
|
|
OHCI1394_DRIVER_NAME, ohci))
|
|
FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq);
|
|
|
|
ohci->init_state = OHCI_INIT_HAVE_IRQ;
|
|
ohci_initialize(ohci);
|
|
|
|
/* Set certain csr values */
|
|
host->csr.guid_hi = reg_read(ohci, OHCI1394_GUIDHi);
|
|
host->csr.guid_lo = reg_read(ohci, OHCI1394_GUIDLo);
|
|
host->csr.cyc_clk_acc = 100; /* how do we determine clk accuracy? */
|
|
host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf;
|
|
host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7;
|
|
|
|
if (phys_dma) {
|
|
host->low_addr_space =
|
|
(u64) reg_read(ohci, OHCI1394_PhyUpperBound) << 16;
|
|
if (!host->low_addr_space)
|
|
host->low_addr_space = OHCI1394_PHYS_UPPER_BOUND_FIXED;
|
|
}
|
|
host->middle_addr_space = OHCI1394_MIDDLE_ADDRESS_SPACE;
|
|
|
|
/* Tell the highlevel this host is ready */
|
|
if (hpsb_add_host(host))
|
|
FAIL(-ENOMEM, "Failed to register host with highlevel");
|
|
|
|
ohci->init_state = OHCI_INIT_DONE;
|
|
|
|
return 0;
|
|
#undef FAIL
|
|
}
|
|
|
|
static void ohci1394_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ti_ohci *ohci;
|
|
struct device *dev;
|
|
|
|
ohci = pci_get_drvdata(pdev);
|
|
if (!ohci)
|
|
return;
|
|
|
|
dev = get_device(&ohci->host->device);
|
|
|
|
switch (ohci->init_state) {
|
|
case OHCI_INIT_DONE:
|
|
hpsb_remove_host(ohci->host);
|
|
|
|
/* Clear out BUS Options */
|
|
reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
|
|
reg_write(ohci, OHCI1394_BusOptions,
|
|
(reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) |
|
|
0x00ff0000);
|
|
memset(ohci->csr_config_rom_cpu, 0, OHCI_CONFIG_ROM_LEN);
|
|
|
|
case OHCI_INIT_HAVE_IRQ:
|
|
/* Clear interrupt registers */
|
|
reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
|
|
|
|
/* Disable IRM Contender */
|
|
set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4));
|
|
|
|
/* Clear link control register */
|
|
reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
|
|
|
|
/* Let all other nodes know to ignore us */
|
|
ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
|
|
|
|
/* Soft reset before we start - this disables
|
|
* interrupts and clears linkEnable and LPS. */
|
|
ohci_soft_reset(ohci);
|
|
free_irq(ohci->dev->irq, ohci);
|
|
|
|
case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE:
|
|
/* The ohci_soft_reset() stops all DMA contexts, so we
|
|
* dont need to do this. */
|
|
free_dma_rcv_ctx(&ohci->ar_req_context);
|
|
free_dma_rcv_ctx(&ohci->ar_resp_context);
|
|
free_dma_trm_ctx(&ohci->at_req_context);
|
|
free_dma_trm_ctx(&ohci->at_resp_context);
|
|
|
|
case OHCI_INIT_HAVE_SELFID_BUFFER:
|
|
pci_free_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE,
|
|
ohci->selfid_buf_cpu,
|
|
ohci->selfid_buf_bus);
|
|
|
|
case OHCI_INIT_HAVE_CONFIG_ROM_BUFFER:
|
|
pci_free_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN,
|
|
ohci->csr_config_rom_cpu,
|
|
ohci->csr_config_rom_bus);
|
|
|
|
case OHCI_INIT_HAVE_IOMAPPING:
|
|
iounmap(ohci->registers);
|
|
|
|
case OHCI_INIT_HAVE_MEM_REGION:
|
|
release_mem_region(pci_resource_start(ohci->dev, 0),
|
|
OHCI1394_REGISTER_SIZE);
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
/* On UniNorth, power down the cable and turn off the chip clock
|
|
* to save power on laptops */
|
|
if (machine_is(powermac)) {
|
|
struct device_node* ofn = pci_device_to_OF_node(ohci->dev);
|
|
|
|
if (ofn) {
|
|
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
|
|
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
|
|
}
|
|
}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
case OHCI_INIT_ALLOC_HOST:
|
|
pci_set_drvdata(ohci->dev, NULL);
|
|
}
|
|
|
|
if (dev)
|
|
put_device(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ohci1394_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
int err;
|
|
struct ti_ohci *ohci = pci_get_drvdata(pdev);
|
|
|
|
if (!ohci) {
|
|
printk(KERN_ERR "%s: tried to suspend nonexisting host\n",
|
|
OHCI1394_DRIVER_NAME);
|
|
return -ENXIO;
|
|
}
|
|
DBGMSG("suspend called");
|
|
|
|
/* Clear the async DMA contexts and stop using the controller */
|
|
hpsb_bus_reset(ohci->host);
|
|
|
|
/* See ohci1394_pci_remove() for comments on this sequence */
|
|
reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
|
|
reg_write(ohci, OHCI1394_BusOptions,
|
|
(reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) |
|
|
0x00ff0000);
|
|
reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
|
|
set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4));
|
|
reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
|
|
ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
|
|
ohci_soft_reset(ohci);
|
|
|
|
err = pci_save_state(pdev);
|
|
if (err) {
|
|
PRINT(KERN_ERR, "pci_save_state failed with %d", err);
|
|
return err;
|
|
}
|
|
err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
if (err)
|
|
DBGMSG("pci_set_power_state failed with %d", err);
|
|
|
|
/* PowerMac suspend code comes last */
|
|
#ifdef CONFIG_PPC_PMAC
|
|
if (machine_is(powermac)) {
|
|
struct device_node *ofn = pci_device_to_OF_node(pdev);
|
|
|
|
if (ofn)
|
|
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
|
|
}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci1394_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
int err;
|
|
struct ti_ohci *ohci = pci_get_drvdata(pdev);
|
|
|
|
if (!ohci) {
|
|
printk(KERN_ERR "%s: tried to resume nonexisting host\n",
|
|
OHCI1394_DRIVER_NAME);
|
|
return -ENXIO;
|
|
}
|
|
DBGMSG("resume called");
|
|
|
|
/* PowerMac resume code comes first */
|
|
#ifdef CONFIG_PPC_PMAC
|
|
if (machine_is(powermac)) {
|
|
struct device_node *ofn = pci_device_to_OF_node(pdev);
|
|
|
|
if (ofn)
|
|
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
|
|
}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
PRINT(KERN_ERR, "pci_enable_device failed with %d", err);
|
|
return err;
|
|
}
|
|
|
|
/* See ohci1394_pci_probe() for comments on this sequence */
|
|
ohci_soft_reset(ohci);
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
|
|
reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
|
|
mdelay(50);
|
|
ohci_initialize(ohci);
|
|
|
|
hpsb_resume_host(ohci->host);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct pci_device_id ohci1394_pci_tbl[] = {
|
|
{
|
|
.class = PCI_CLASS_SERIAL_FIREWIRE_OHCI,
|
|
.class_mask = PCI_ANY_ID,
|
|
.vendor = PCI_ANY_ID,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
{ 0, },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, ohci1394_pci_tbl);
|
|
|
|
static struct pci_driver ohci1394_pci_driver = {
|
|
.name = OHCI1394_DRIVER_NAME,
|
|
.id_table = ohci1394_pci_tbl,
|
|
.probe = ohci1394_pci_probe,
|
|
.remove = ohci1394_pci_remove,
|
|
#ifdef CONFIG_PM
|
|
.resume = ohci1394_pci_resume,
|
|
.suspend = ohci1394_pci_suspend,
|
|
#endif
|
|
};
|
|
|
|
/***********************************
|
|
* OHCI1394 Video Interface *
|
|
***********************************/
|
|
|
|
/* essentially the only purpose of this code is to allow another
|
|
module to hook into ohci's interrupt handler */
|
|
|
|
/* returns zero if successful, one if DMA context is locked up */
|
|
int ohci1394_stop_context(struct ti_ohci *ohci, int reg, char *msg)
|
|
{
|
|
int i=0;
|
|
|
|
/* stop the channel program if it's still running */
|
|
reg_write(ohci, reg, 0x8000);
|
|
|
|
/* Wait until it effectively stops */
|
|
while (reg_read(ohci, reg) & 0x400) {
|
|
i++;
|
|
if (i>5000) {
|
|
PRINT(KERN_ERR,
|
|
"Runaway loop while stopping context: %s...", msg ? msg : "");
|
|
return 1;
|
|
}
|
|
|
|
mb();
|
|
udelay(10);
|
|
}
|
|
if (msg) PRINT(KERN_ERR, "%s: dma prg stopped", msg);
|
|
return 0;
|
|
}
|
|
|
|
void ohci1394_init_iso_tasklet(struct ohci1394_iso_tasklet *tasklet, int type,
|
|
void (*func)(unsigned long), unsigned long data)
|
|
{
|
|
tasklet_init(&tasklet->tasklet, func, data);
|
|
tasklet->type = type;
|
|
/* We init the tasklet->link field, so we can list_del() it
|
|
* without worrying whether it was added to the list or not. */
|
|
INIT_LIST_HEAD(&tasklet->link);
|
|
}
|
|
|
|
int ohci1394_register_iso_tasklet(struct ti_ohci *ohci,
|
|
struct ohci1394_iso_tasklet *tasklet)
|
|
{
|
|
unsigned long flags, *usage;
|
|
int n, i, r = -EBUSY;
|
|
|
|
if (tasklet->type == OHCI_ISO_TRANSMIT) {
|
|
n = ohci->nb_iso_xmit_ctx;
|
|
usage = &ohci->it_ctx_usage;
|
|
}
|
|
else {
|
|
n = ohci->nb_iso_rcv_ctx;
|
|
usage = &ohci->ir_ctx_usage;
|
|
|
|
/* only one receive context can be multichannel (OHCI sec 10.4.1) */
|
|
if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) {
|
|
if (test_and_set_bit(0, &ohci->ir_multichannel_used)) {
|
|
return r;
|
|
}
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
|
|
|
|
for (i = 0; i < n; i++)
|
|
if (!test_and_set_bit(i, usage)) {
|
|
tasklet->context = i;
|
|
list_add_tail(&tasklet->link, &ohci->iso_tasklet_list);
|
|
r = 0;
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
void ohci1394_unregister_iso_tasklet(struct ti_ohci *ohci,
|
|
struct ohci1394_iso_tasklet *tasklet)
|
|
{
|
|
unsigned long flags;
|
|
|
|
tasklet_kill(&tasklet->tasklet);
|
|
|
|
spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
|
|
|
|
if (tasklet->type == OHCI_ISO_TRANSMIT)
|
|
clear_bit(tasklet->context, &ohci->it_ctx_usage);
|
|
else {
|
|
clear_bit(tasklet->context, &ohci->ir_ctx_usage);
|
|
|
|
if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) {
|
|
clear_bit(0, &ohci->ir_multichannel_used);
|
|
}
|
|
}
|
|
|
|
list_del(&tasklet->link);
|
|
|
|
spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
|
|
}
|
|
|
|
EXPORT_SYMBOL(ohci1394_stop_context);
|
|
EXPORT_SYMBOL(ohci1394_init_iso_tasklet);
|
|
EXPORT_SYMBOL(ohci1394_register_iso_tasklet);
|
|
EXPORT_SYMBOL(ohci1394_unregister_iso_tasklet);
|
|
|
|
/***********************************
|
|
* General module initialization *
|
|
***********************************/
|
|
|
|
MODULE_AUTHOR("Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>");
|
|
MODULE_DESCRIPTION("Driver for PCI OHCI IEEE-1394 controllers");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static void __exit ohci1394_cleanup (void)
|
|
{
|
|
pci_unregister_driver(&ohci1394_pci_driver);
|
|
}
|
|
|
|
static int __init ohci1394_init(void)
|
|
{
|
|
return pci_register_driver(&ohci1394_pci_driver);
|
|
}
|
|
|
|
module_init(ohci1394_init);
|
|
module_exit(ohci1394_cleanup);
|