FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2025-01-15 22:21:29 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Luciano Coelho 6f921fab58 wlcore: set irq_trigger in board files instead of hiding behind a quirk 
The platform_quirk element in the platform data was used
to change the way the IRQ is triggered.  When set,
the EDGE_IRQ quirk would change the irqflags used
and treat edge trigger differently from the rest.

Instead of hiding this irq flag setting behind the quirk,
have the board files set the irq_trigger explicitly.

This will allow us to use standard irq DT definitions
later on.

Signed-off-by: Luciano Coelho <luca@coelho.fi>
[Eliad - rebase, add irq_trigger field and pass it,
update board file changes]
Signed-off-by: Eliad Peller <eliad@wizery.com>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 14:20:50 -07:00
..
include/mach
ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
2013-12-20 17:17:16 +01:00
am33xx-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
am33xx.h
ARM: OMAP2+: AM43x: early init
2013-06-12 08:00:35 -07:00
board-cm-t35.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
board-devkit8000.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-flash.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
board-flash.h
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
board-generic.c
ARM: SoC platform changes
2015-02-17 09:27:54 -08:00
board-ldp.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-n8x0.c
ARM: SoC/OMAP GPMC driver cleanup and move for 3.19
2014-12-09 16:57:56 -08:00
board-omap3beagle.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-omap3logic.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-omap3pandora.c
ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only
2015-01-19 09:56:04 +01:00
board-omap3stalker.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-omap3touchbook.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-overo.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-rx51-peripherals.c
media updates for v3.19-rc1
2014-12-11 11:49:23 -08:00
board-rx51-video.c
ARM: OMAP2+: N900: remove omapdss init for DT boot
2014-04-18 16:37:43 -07:00
board-rx51.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-rx51.h
…
clkt2xxx_dpll.c
…
clkt2xxx_dpllcore.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c
ARM: OMAP2: clock: add DT boot support for cpufreq_ck
2014-05-28 13:05:57 +03:00
clkt34xx_dpll3m2.c
…
clkt_clksel.c
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
2014-01-17 12:37:00 -08:00
clkt_dpll.c
Few fixes for the v3.17 merge window:
2014-08-09 08:23:27 -07:00
clkt_iclk.c
ARM: OMAP2+: clock/interface: remove some headers from clkt_iclk.c file
2014-07-15 14:09:24 -06:00
clock2xxx.c
…
clock2xxx.h
ARM: OMAP2: clock: remove unused apll code
2015-01-07 10:54:40 -08:00
clock3xxx.c
ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent
2014-11-13 09:26:33 -07:00
clock3xxx.h
CLK: TI: add omap3 clock init file
2014-01-17 12:35:48 -08:00
clock34xx.c
…
clock34xx.h
…
clock36xx.c
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
2014-01-17 12:37:00 -08:00
clock36xx.h
…
clock44xx.h
…
clock2430.c
…
clock3517.c
…
clock3517.h
…
clock_common_data.c
arm: omap2+ remove dead clock code
2015-02-02 14:23:39 -08:00
clock.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
clock.h
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
clockdomain.c
…
clockdomain.h
ARM: OMAP2+: Add clock domain support for dm816x
2015-01-26 09:26:32 -08:00
clockdomains2xxx_3xxx_data.c
…
clockdomains3xxx_data.c
ARM: OMAP3: fix iva mmu programming issues
2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c
ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header
2013-08-23 04:28:36 -06:00
clockdomains33xx_data.c
…
clockdomains43xx_data.c
ARM: OMAP2+: CM: AM43x clockdomain data
2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
…
clockdomains54xx_data.c
ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
2013-06-08 11:56:15 -06:00
clockdomains81xx_data.c
ARM: OMAP2+: Add clock domain support for dm816x
2015-01-26 09:26:32 -08:00
clockdomains2420_data.c
…
clockdomains2430_data.c
…
cm1_7xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm1_44xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm1_54xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_7xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_44xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_54xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
cm2xxx.c
ARM: OMAP2: CM: remove unused PLL functions
2015-01-07 14:27:39 -08:00
cm2xxx.h
ARM: OMAP2: CM: remove unused PLL functions
2015-01-07 14:27:39 -08:00
cm3xxx.c
ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
2014-10-27 08:39:24 -07:00
cm3xxx.h
ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
2014-10-27 08:39:24 -07:00
cm33xx.c
ARM: OMAP2+: cm33xx.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
cm33xx.h
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
2014-10-27 08:39:24 -07:00
cm44xx.h
ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h
2014-10-27 08:39:25 -07:00
cm81xx.h
ARM: OMAP2+: Add clock domain support for dm816x
2015-01-26 09:26:32 -08:00
cm_common.c
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
2014-10-27 08:39:24 -07:00
cm-regbits-7xx.h
ARM: OMAP: DRA7: CM: Add minimal regbit shifts
2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h
ARM: OMAP2: convert sys_ck and osc_ck to standard clock types
2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
ARM: OMAP3: PRM/CM: Cleanup unused header
2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
ARM: OMAP4: PRM/CM: Cleanup unused header
2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h
ARM: OMAP5: PRM/CM: Cleanup unused header
2013-07-21 22:10:25 -06:00
cm.h
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
2014-10-27 08:39:24 -07:00
cminst44xx.c
ARM: OMAP4: CM: make cminst direct register access functions static
2014-10-27 08:39:25 -07:00
common-board-devices.c
…
common-board-devices.h
arm: omap2: n8x0: move i2c devices to DT
2014-09-16 14:43:11 -07:00
common.c
ARM: OMAP2+: remove DSP platform device
2014-07-15 21:01:05 -07:00
common.h
ARM: SoC non-critical fixes
2015-02-17 09:15:46 -08:00
control.c
ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c
2014-08-01 01:21:14 -07:00
control.h
ARM: SoC non-critical fixes
2015-02-17 09:15:46 -08:00
cpuidle34xx.c
cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic
2014-11-12 21:17:27 +01:00
cpuidle44xx.c
cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic
2014-11-12 21:17:27 +01:00
ctrl_module_wkup_44xx.h
…
devices.c
media updates for v3.19-rc1
2014-12-11 11:49:23 -08:00
devices.h
…
display.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
display.h
ARM: OMAP2+: add omapdss_init_of()
2014-03-19 10:52:23 +02:00
dma.c
ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver
2014-07-21 23:32:51 -07:00
dpll3xxx.c
clk: Add rate constraints to clocks
2015-02-02 14:23:42 -08:00
dpll44xx.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
drm.c
ARM: OMAP2+: display: Create omapdrm device inside omap_display_init
2013-10-08 14:02:35 -07:00
dss-common.c
ARM: OMAP2+: remove pdata quirks for displays
2014-04-04 09:55:18 +03:00
dss-common.h
ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
2013-10-09 07:54:34 -07:00
fb.c
ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init
2013-10-08 14:02:51 -07:00
gpio.c
arm-soc: soc-specific updates
2013-02-21 15:27:22 -08:00
gpmc-nand.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
gpmc-onenand.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
gpmc-smsc911x.c
ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h
…
gpmc.h
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
hdq1w.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
hdq1w.h
…
hsmmc.c
mmc: omap_hsmmc: remove unused slot_id parameter
2014-11-26 14:30:56 +01:00
hsmmc.h
mmc: omap_hsmmc: remove unused slot_id parameter
2014-11-26 14:30:56 +01:00
hwspinlock.c
arm-soc: soc-specific updates
2013-02-21 15:27:22 -08:00
i2c.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
i2c.h
…
id.c
ARM: OMAP2+: Fix ti81xx devtype
2015-01-14 17:37:15 -08:00
id.h
…
io.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
iomap.h
…
Kconfig
ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
2015-01-20 08:49:08 -08:00
l3_2xxx.h
…
l3_3xxx.h
…
l4_2xxx.h
…
l4_3xxx.h
…
Makefile
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
Makefile.boot
…
mcbsp.c
ARM: OMAP3: McBSP: do not access CM register directly
2013-10-19 10:11:51 -06:00
mmc.h
ARM: OMAP2: MMC: include mmc-omap platform header directly
2014-11-26 14:30:53 +01:00
msdi.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
mux34xx.c
ARM: OMAP2+: mux: fix trivial typo in name
2013-09-18 12:02:01 -07:00
mux34xx.h
omap: mux: add AM/DM37x gpios
2013-05-08 17:07:40 -07:00
mux.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
mux.h
ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF
2014-02-28 15:36:34 -08:00
omap2-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
omap3-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
omap4-common.c
ARM: make of_device_ids const
2015-02-19 09:44:25 +01:00
omap4-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
omap4-sar-layout.h
ARM: arm-soc cleanup for 3.10
2013-05-02 09:03:55 -07:00
omap24xx.h
…
omap34xx.h
…
omap44xx.h
…
omap54xx.h
ARM: DRA7: Reuse io tables and add a new .init_early
2013-08-13 11:00:35 +05:30
omap_device.c
ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-13 00:42:49 +01:00
omap_device.h
ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c
ARM: OMAP2+: Remove legacy hwmod entries for omap2
2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c
ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
2013-12-25 21:41:27 -07:00
omap_hwmod_3xxx_data.c
ARM: OMAP3: Remove legacy support for am35xx-emac
2015-01-13 09:00:38 -08:00
omap_hwmod_7xx_data.c
ARM: DRA7: hwmod_data: Fix hwmod data for pcie
2015-02-26 00:02:28 -07:00
omap_hwmod_33xx_43xx_common_data.h
ARM: OMAP2+: hwmod: AM43x support
2013-10-13 22:48:46 -06:00
omap_hwmod_33xx_43xx_interconnect_data.c
ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c
ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
2014-11-26 14:30:53 +01:00
omap_hwmod_33xx_data.c
ARM: OMAP2: MMC: include mmc-omap platform header directly
2014-11-26 14:30:53 +01:00
omap_hwmod_43xx_data.c
ARM: AM43xx: hwmod: set DSS submodule parent hwmods
2015-01-20 18:12:17 -07:00
omap_hwmod_44xx_data.c
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
omap_hwmod_54xx_data.c
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
omap_hwmod_81xx_data.c
ARM: OMAP2+: Add dm816x hwmod support
2015-01-26 09:26:32 -08:00
omap_hwmod_2420_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c
ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
…
omap_hwmod_common_data.h
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c
…
omap_hwmod.c
ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecounting
2015-03-01 16:24:04 -07:00
omap_hwmod.h
ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod
2015-02-26 00:00:51 -07:00
omap_opp_data.h
…
omap_phy_internal.c
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
omap_twl.c
mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree
2014-04-23 15:31:05 +01:00
omap-headsmp.S
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
2015-01-05 15:48:21 -08:00
omap-hotplug.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
omap-iommu.c
ARM: omap: Don't set iommu pdata da_start and da_end fields
2014-07-29 12:39:23 +02:00
omap-mpuss-lowpower.c
ARM: OMAP4+: PM: Program CPU logic power state
2014-11-10 16:02:05 -08:00
omap-pm-noop.c
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
omap-pm.h
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
omap-secure.c
RX-51: Add support for OMAP3 ROM Random Number Generator
2013-10-08 12:02:12 -07:00
omap-secure.h
ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
2014-09-08 11:38:41 -05:00
omap-smc.S
ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1
2013-10-08 11:55:32 -07:00
omap-smp.c
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
2015-01-05 15:48:21 -08:00
omap-wakeupgen.c
ARM: OMAP5 / DRA7: Enable CPU RET on suspend
2014-09-08 11:38:43 -05:00
omap-wakeupgen.h
ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
2014-09-08 11:38:41 -05:00
opp2xxx.h
…
opp3xxx_data.c
…
opp4xxx_data.c
…
opp2420_data.c
…
opp2430_data.c
…
opp.c
ACPI and power management updates for 3.13-rc1
2013-11-14 13:41:48 +09:00
pdata-quirks.c
wlcore: set irq_trigger in board files instead of hiding behind a quirk
2015-03-19 14:20:50 -07:00
pm24xx.c
ARM: SoC device-tree changes for 3.17
2014-08-08 11:16:58 -07:00
pm34xx.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
pm44xx.c
ARM: OMAP4+: PM: Centralize static dependency mapping table
2014-11-10 16:01:40 -08:00
pm-debug.c
Merge branch 'cleanup' into for-linus
2013-05-02 21:31:29 +01:00
pm.c
cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
2014-10-03 15:37:54 +02:00
pm.h
ARM: OMAP5 / DRA7: Enable CPU RET on suspend
2014-09-08 11:38:43 -05:00
pmu.c
arm: omap: specify PMUs are for ARMv7 CPUs
2015-02-06 00:13:06 -08:00
powerdomain-common.c
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
2014-05-15 22:35:10 -06:00
powerdomain.c
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
powerdomain.h
ARM: OMAP2+: powerdomain.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
…
powerdomains2xxx_3xxx_data.h
…
powerdomains2xxx_data.c
…
powerdomains3xxx_data.c
ARM: OMAP2+: Fix ti81xx class type
2015-01-14 17:37:16 -08:00
powerdomains7xx_data.c
ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate
2014-09-08 11:22:31 -05:00
powerdomains33xx_data.c
…
powerdomains43xx_data.c
ARM: OMAP2+: PM: AM43x powerdomain data
2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
…
powerdomains54xx_data.c
ARM: OMAP5: powerdomain data: fix powerdomain powerstate
2014-09-08 11:22:40 -05:00
prcm43xx.h
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
prcm44xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
2013-06-08 11:55:18 -06:00
prcm_mpu_44xx_54xx.h
ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
2013-06-08 11:54:40 -06:00
prcm-common.h
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
prm2xxx_3xxx.c
ARM: OMAP2+: PRM: add generic API for checking hardreset status
2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h
ARM: OMAP2+: PRM: add generic API for checking hardreset status
2014-10-27 08:39:25 -07:00
prm2xxx.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm2xxx.h
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm3xxx.c
ARM: make of_device_ids const
2015-02-19 09:44:25 +01:00
prm3xxx.h
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers
2015-01-07 14:27:39 -08:00
prm7xx.h
arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
2014-07-22 14:35:05 -06:00
prm33xx.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm33xx.h
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm44xx_54xx.h
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers
2015-01-07 14:27:39 -08:00
prm44xx.c
ARM: OMAP4+: PRM: fix omap4 version of prm_save_and_clear_irqen
2015-03-01 16:58:25 -07:00
prm44xx.h
ARM: OMAP4+: PRM: Move function prototypes to common header for re-use
2013-06-08 11:02:20 -06:00
prm54xx.h
ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files
2013-06-08 11:41:01 -06:00
prm_common.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
prm-regbits-24xx.h
ARM: OMAP2: PRM/CM: Cleanup unused header
2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h
ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
2014-07-06 15:51:23 -06:00
prm-regbits-44xx.h
ARM: OMAP4: PRM/CM: Cleanup unused header
2013-07-21 22:10:14 -06:00
prm.h
ARM: OMAP3: PRM: add support for legacy iomapping init
2015-01-30 10:55:23 -08:00
prminst44xx.c
ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
2014-10-27 08:39:25 -07:00
prminst44xx.h
ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
2014-10-27 08:39:25 -07:00
scrm44xx.h
…
scrm54xx.h
ARM: OMAP5: SCRM: Add OMAP54XX header file.
2013-06-08 11:55:44 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
…
sdram-micron-mt46h32m32lf-6.h
…
sdram-nokia.c
…
sdram-nokia.h
…
sdram-numonyx-m65kxxxxam.h
…
sdram-qimonda-hyb18m512160af-6.h
…
sdrc2xxx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
sdrc.c
…
sdrc.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
serial.c
ARM: OMAP: serial: remove last vestige of DTR_gpio support.
2014-11-10 09:06:44 -08:00
serial.h
…
sleep24xx.S
…
sleep34xx.S
…
sleep44xx.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
smartreflex-class3.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
soc.h
ARM: OMAP2+: Fix ti81xx class type
2015-01-14 17:37:16 -08:00
sr_device.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
sram34xx.S
…
sram242x.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sram243x.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sram.c
ARM: OMAP4+: Remove static iotable mappings for SRAM
2014-09-18 09:47:35 -07:00
sram.h
ARM: OMAP4+: Remove static iotable mappings for SRAM
2014-09-18 09:47:35 -07:00
ti81xx-restart.c
ARM: OMAP2+: Fix reboot for 81xx
2015-01-14 17:37:16 -08:00
ti81xx.h
…
timer.c
ARM: SoC non-critical fixes
2015-02-17 09:15:46 -08:00
twl-common.c
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
twl-common.h
…
usb-host.c
usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>
2014-04-21 14:07:24 -05:00
usb-musb.c
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
usb-tusb6010.c
ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once
2014-07-07 04:52:31 -07:00
usb.h
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
vc3xxx_data.c
…
vc44xx_data.c
…
vc.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
vc.h
ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode
2014-05-06 13:48:35 -07:00
voltage.c
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
voltage.h
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
…
voltagedomains3xxx_data.c
…
voltagedomains44xx_data.c
…
voltagedomains54xx_data.c
ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
2013-06-25 17:11:06 -07:00
vp3xxx_data.c
…
vp44xx_data.c
…
vp.c
…
vp.h
…
wd_timer.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
wd_timer.h
…