linux/drivers/iio
William Breathitt Gray 75897b7c5e iio: stx104: Allow build for X86_64
With the introduction of the ISA_BUS_API Kconfig option, ISA-style
drivers may be built for X86_64 architectures. This patch changes the
ISA Kconfig option dependency of the Apex Embedded Systems STX104 DAC
driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is
expected to.

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-17 20:21:12 -07:00
..
accel 2nd set of new device support, features and cleanup for IIO in the 4.7 cycle. 2016-04-26 15:07:23 -07:00
adc Merge 4.6-rc7 into staging-next 2016-05-09 13:20:04 +02:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio: buffer-dmaengine: Use dmaengine_terminate_sync() 2016-02-09 21:05:17 +00:00
chemical iio: convert to common i2c_check_functionality() return value 2016-02-27 17:17:43 +00:00
common iio: st_sensors: support open drain mode 2016-04-19 19:58:13 +01:00
dac iio: stx104: Allow build for X86_64 2016-06-17 20:21:12 -07:00
dummy Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle. 2015-12-26 17:03:33 -08:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro 2nd set of new device support, features and cleanup for IIO in the 4.7 cycle. 2016-04-26 15:07:23 -07:00
health iio: health: max30100: correct FIFO check condition 2016-03-28 10:09:58 +01:00
humidity iio: humidity: Add triggered buffer support for AM2315 2016-04-24 10:00:20 +01:00
imu Staging and IIO driver update for 4.7-rc1 2016-05-20 22:20:48 -07:00
light 2nd set of new device support, features and cleanup for IIO in the 4.7 cycle. 2016-04-26 15:07:23 -07:00
magnetometer Merge 4.6-rc7 into staging-next 2016-05-09 13:20:04 +02:00
orientation
potentiometer iio: potentiometer: add driver for Maxim Integrated DS1803 2016-04-10 12:34:09 +01:00
pressure iio: pressure: bmp280: add ability to control oversampling rate 2016-04-25 19:05:29 +01:00
proximity iio: convert to common i2c_check_functionality() return value 2016-02-27 17:17:43 +00:00
temperature iio: convert to common i2c_check_functionality() return value 2016-02-27 17:17:43 +00:00
trigger iio: trigger: Introduce IIO hrtimer based trigger 2015-12-03 18:19:27 +00:00
iio_core_trigger.h
iio_core.h
industrialio-buffer.c iio: fix config watermark initial value 2016-03-28 11:00:38 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio:core: mounting matrix support 2016-04-23 22:13:05 +01:00
industrialio-event.c iio: event: Remove negative error code from iio_event_poll 2015-08-12 19:26:39 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: core: Add devm_ APIs for iio_channel_{get,release}_all 2016-04-19 19:58:15 +01:00
Kconfig iio: light: add MAX30100 oximeter driver support 2015-12-12 12:14:37 +00:00
Makefile iio: light: add MAX30100 oximeter driver support 2015-12-12 12:14:37 +00:00