mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-24 02:18:54 +00:00
3a31155cff
This patch (as1096) fixes an annoying problem: When a full-speed or low-speed device is plugged into an EHCI controller, it fails to enumerate at high speed and then is handed over to the companion controller. But usbcore logs a misleading and unwanted error message when the high-speed enumeration fails. The patch adds a new HCD method, port_handed_over, which asks whether a port has been handed over to a companion controller. If it has, the error message is suppressed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
202 lines
4.8 KiB
C
202 lines
4.8 KiB
C
/*
|
|
* EHCI HCD (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 2006-2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
|
|
*
|
|
* Bus Glue for PPC On-Chip EHCI driver
|
|
* Tested on AMCC 440EPx
|
|
*
|
|
* Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
|
|
*
|
|
* This file is licenced under the GPL.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
extern int usb_disabled(void);
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int ehci_ppc_soc_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
|
|
retval = ehci_halt(ehci);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = ehci_init(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
ehci->sbrn = 0x20;
|
|
return ehci_reset(ehci);
|
|
}
|
|
|
|
/**
|
|
* usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller, and
|
|
* then invokes the start() method for the HCD associated with it
|
|
* through the hotplug entry's driver_data.
|
|
*
|
|
*/
|
|
int usb_ehci_ppc_soc_probe(const struct hc_driver *driver,
|
|
struct usb_hcd **hcd_out,
|
|
struct platform_device *dev)
|
|
{
|
|
int retval;
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
|
|
if (dev->resource[1].flags != IORESOURCE_IRQ) {
|
|
pr_debug("resource[1] is not IORESOURCE_IRQ");
|
|
retval = -ENOMEM;
|
|
}
|
|
hcd = usb_create_hcd(driver, &dev->dev, "PPC-SOC EHCI");
|
|
if (!hcd)
|
|
return -ENOMEM;
|
|
hcd->rsrc_start = dev->resource[0].start;
|
|
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
|
|
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
|
|
pr_debug("request_mem_region failed");
|
|
retval = -EBUSY;
|
|
goto err1;
|
|
}
|
|
|
|
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
pr_debug("ioremap failed");
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->big_endian_mmio = 1;
|
|
ehci->big_endian_desc = 1;
|
|
ehci->caps = hcd->regs;
|
|
ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
|
|
|
|
/* cache this readonly data; minimize chip reads */
|
|
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
|
|
|
|
#if defined(CONFIG_440EPX)
|
|
/*
|
|
* 440EPx Errata USBH_3
|
|
* Fix: Enable Break Memory Transfer (BMT) in INSNREG3
|
|
*/
|
|
out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0));
|
|
ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n");
|
|
#endif
|
|
|
|
retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
|
|
if (retval == 0)
|
|
return retval;
|
|
|
|
iounmap(hcd->regs);
|
|
err2:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
err1:
|
|
usb_put_hcd(hcd);
|
|
return retval;
|
|
}
|
|
|
|
/* may be called without controller electrically present */
|
|
/* may be called with controller, bus, and devices active */
|
|
|
|
/**
|
|
* usb_ehci_hcd_ppc_soc_remove - shutdown processing for PPC-SoC-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_ehci_hcd_ppc_soc_probe(), first invoking
|
|
* the HCD's stop() method. It is always called from a thread
|
|
* context, normally "rmmod", "apmd", or something similar.
|
|
*
|
|
*/
|
|
void usb_ehci_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *dev)
|
|
{
|
|
usb_remove_hcd(hcd);
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
usb_put_hcd(hcd);
|
|
}
|
|
|
|
static const struct hc_driver ehci_ppc_soc_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "PPC-SOC EHCI",
|
|
.hcd_priv_size = sizeof(struct ehci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.irq = ehci_irq,
|
|
.flags = HCD_MEMORY | HCD_USB2,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = ehci_ppc_soc_setup,
|
|
.start = ehci_run,
|
|
.stop = ehci_stop,
|
|
.shutdown = ehci_shutdown,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ehci_urb_enqueue,
|
|
.urb_dequeue = ehci_urb_dequeue,
|
|
.endpoint_disable = ehci_endpoint_disable,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ehci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ehci_hub_status_data,
|
|
.hub_control = ehci_hub_control,
|
|
.bus_suspend = ehci_bus_suspend,
|
|
.bus_resume = ehci_bus_resume,
|
|
.relinquish_port = ehci_relinquish_port,
|
|
.port_handed_over = ehci_port_handed_over,
|
|
};
|
|
|
|
static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = NULL;
|
|
int ret;
|
|
|
|
pr_debug("In ehci_hcd_ppc_soc_drv_probe\n");
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
/* FIXME we only want one one probe() not two */
|
|
ret = usb_ehci_ppc_soc_probe(&ehci_ppc_soc_hc_driver, &hcd, pdev);
|
|
return ret;
|
|
}
|
|
|
|
static int ehci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
/* FIXME we only want one one remove() not two */
|
|
usb_ehci_ppc_soc_remove(hcd, pdev);
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:ppc-soc-ehci");
|
|
static struct platform_driver ehci_ppc_soc_driver = {
|
|
.probe = ehci_hcd_ppc_soc_drv_probe,
|
|
.remove = ehci_hcd_ppc_soc_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "ppc-soc-ehci",
|
|
}
|
|
};
|