mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 18:07:03 +00:00
3c9a6793bd
Firstly some contact detail updates: * NXP took over freescale. Update the mma8452 header to reflect this. * Martin Kepplinger email address change in mma8452 header. * Adriana Reus has changed email address. Update .mailmap. * Matt Ranostay has changed email address. Update .mailmap. New Device Support * max1363 - add the missing i2c_device_ids for a couple of parts so they can actually be used. * ms5867 - add device ids for ms5805 and ms5837 parts. New Features * ad5755 - DT support. This one was a bit controversial and under review for a long time. Still no one could come up with a better solution. * stx104 - add gpio support * ti-adc081c - Add ACPI device ID matching. Core changes * Refuse to register triggers with duplicate names. There is no way to distinguish between them so this makes no sense. A few drivers do not generate unique names for each instance of the device present. We can't fix this without changing ABI so leave them and wait for someone to actually take the rare step of two identical accelerometers on the same board. * buffer-dma - use ARRAY_SIZE in a few appropriate locations. Tools * Fix the fact that the --trigger-num option in generic_buffer didn't allow 0 which is perfectly valid in the ABI. Cleanups * as3935 - improve error reporting. - remove redundant zeroing of a field in iio_priv. * gp2ap020a00f - use the iio_device_claim_*_mode helpers rather than open coding locking around mode changes. * isl29125 - use the iio_device_claim_*_mode helpers rather than open coding locking. * lidar - use the iio_device_claim_*_mode helpers rather than open coding locking. * mma8452 - more detail in devices supported description in comments (addresses and similar) * sca3000 - add a missing error check. * tcs3414 - use the iio_device_claim_*_mode helpers rather than open coding locking. * tcs3472 - use the iio_device_claim_*_mode helpers rather than open coding locking. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJXdAT2AAoJEFSFNJnE9BaIq68P/3Z0q1lc1cb+K8HV5jgukEKw eoxZa5lFIOuHAGeXo9GAdJiH5oT/yAIhadf3gzuuQLaTJwWYKD51aPVwgpT5M2+x Bnu2XiYcaoIm/Foat70ycjeYaGxO/xO2vbLp5v0BJV2ujvjm/oCKw5pxYeU4Jm63 iKaZo9jn/HoshOMpZBrcPZ7Q1TogRdopBNe2fsc8nXFFsv8ODjOZ9Nebs2lk36e+ PWLUWfSkv2LMBSE2LOFyjSW8E4ItBBngBcyqBTFiiln7mpXU5Vv2QSvUhpP2YjUZ rxKvDiG7ADuxMr901whASxyCO180yCxTRIcBsN8oP73gTGHrJnMT0Sptfz7AUUVN gJneiy+iy3TecJ/R6w/DnNzqmZMiEVqlYGkdXVGu8SXrKWilvzcTp5iTmDVM5zLb 1fDZxjbLdNJuHzoSYNiCBcnfzIixOAyKTGFi3jUaPPQ/Lc1qfmgerWWlOzKeUgCZ 5Bzak8MvWuxcO7jkMG8mbARufy3Nu6eh8a39JXFhViGtTtySydMa8eXdYPjqoAtv vgwJNh9U53yYui8i7vU90dM3gJaGg5a4R6EjEKCYcEJf6kM9Go8xCvjU8YWPtIKk rfykpPkKcQzbax07YKvb4f015x7r0V6WCGJjPn0Fi14ugNGJJ6M88l+2UcXcx1zS RRtVRD49Le7pIDCs1Rqn =6Lja -----END PGP SIGNATURE----- Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second round of new iio device support, features and cleanups in the 4.8 cycle Firstly some contact detail updates: * NXP took over freescale. Update the mma8452 header to reflect this. * Martin Kepplinger email address change in mma8452 header. * Adriana Reus has changed email address. Update .mailmap. * Matt Ranostay has changed email address. Update .mailmap. New Device Support * max1363 - add the missing i2c_device_ids for a couple of parts so they can actually be used. * ms5867 - add device ids for ms5805 and ms5837 parts. New Features * ad5755 - DT support. This one was a bit controversial and under review for a long time. Still no one could come up with a better solution. * stx104 - add gpio support * ti-adc081c - Add ACPI device ID matching. Core changes * Refuse to register triggers with duplicate names. There is no way to distinguish between them so this makes no sense. A few drivers do not generate unique names for each instance of the device present. We can't fix this without changing ABI so leave them and wait for someone to actually take the rare step of two identical accelerometers on the same board. * buffer-dma - use ARRAY_SIZE in a few appropriate locations. Tools * Fix the fact that the --trigger-num option in generic_buffer didn't allow 0 which is perfectly valid in the ABI. Cleanups * as3935 - improve error reporting. - remove redundant zeroing of a field in iio_priv. * gp2ap020a00f - use the iio_device_claim_*_mode helpers rather than open coding locking around mode changes. * isl29125 - use the iio_device_claim_*_mode helpers rather than open coding locking. * lidar - use the iio_device_claim_*_mode helpers rather than open coding locking. * mma8452 - more detail in devices supported description in comments (addresses and similar) * sca3000 - add a missing error check. * tcs3414 - use the iio_device_claim_*_mode helpers rather than open coding locking. * tcs3472 - use the iio_device_claim_*_mode helpers rather than open coding locking.
256 lines
6.1 KiB
C
256 lines
6.1 KiB
C
/*
|
|
* DAC driver for the Apex Embedded Systems STX104
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/types.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define STX104_NUM_CHAN 2
|
|
|
|
#define STX104_CHAN(chan) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.channel = chan, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.indexed = 1, \
|
|
.output = 1 \
|
|
}
|
|
|
|
#define STX104_EXTENT 16
|
|
|
|
static unsigned int base[max_num_isa_dev(STX104_EXTENT)];
|
|
static unsigned int num_stx104;
|
|
module_param_array(base, uint, &num_stx104, 0);
|
|
MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
|
|
|
|
/**
|
|
* struct stx104_iio - IIO device private data structure
|
|
* @chan_out_states: channels' output states
|
|
* @base: base port address of the IIO device
|
|
*/
|
|
struct stx104_iio {
|
|
unsigned chan_out_states[STX104_NUM_CHAN];
|
|
unsigned base;
|
|
};
|
|
|
|
/**
|
|
* struct stx104_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @base: base port address of the GPIO device
|
|
* @out_state: output bits state
|
|
*/
|
|
struct stx104_gpio {
|
|
struct gpio_chip chip;
|
|
spinlock_t lock;
|
|
unsigned int base;
|
|
unsigned int out_state;
|
|
};
|
|
|
|
static int stx104_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
|
|
{
|
|
struct stx104_iio *const priv = iio_priv(indio_dev);
|
|
|
|
if (mask != IIO_CHAN_INFO_RAW)
|
|
return -EINVAL;
|
|
|
|
*val = priv->chan_out_states[chan->channel];
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int stx104_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
|
{
|
|
struct stx104_iio *const priv = iio_priv(indio_dev);
|
|
const unsigned chan_addr_offset = 2 * chan->channel;
|
|
|
|
if (mask != IIO_CHAN_INFO_RAW)
|
|
return -EINVAL;
|
|
|
|
priv->chan_out_states[chan->channel] = val;
|
|
outw(val, priv->base + 4 + chan_addr_offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info stx104_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.read_raw = stx104_read_raw,
|
|
.write_raw = stx104_write_raw
|
|
};
|
|
|
|
static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = {
|
|
STX104_CHAN(0),
|
|
STX104_CHAN(1)
|
|
};
|
|
|
|
static int stx104_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
if (offset < 4)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stx104_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
if (offset >= 4)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stx104_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
if (offset < 4)
|
|
return -EINVAL;
|
|
|
|
chip->set(chip, offset, value);
|
|
return 0;
|
|
}
|
|
|
|
static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
|
|
|
|
if (offset >= 4)
|
|
return -EINVAL;
|
|
|
|
return !!(inb(stx104gpio->base) & BIT(offset));
|
|
}
|
|
|
|
static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
|
|
const unsigned int mask = BIT(offset) >> 4;
|
|
unsigned long flags;
|
|
|
|
if (offset < 4)
|
|
return;
|
|
|
|
spin_lock_irqsave(&stx104gpio->lock, flags);
|
|
|
|
if (value)
|
|
stx104gpio->out_state |= mask;
|
|
else
|
|
stx104gpio->out_state &= ~mask;
|
|
|
|
outb(stx104gpio->out_state, stx104gpio->base);
|
|
|
|
spin_unlock_irqrestore(&stx104gpio->lock, flags);
|
|
}
|
|
|
|
static int stx104_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct stx104_iio *priv;
|
|
struct stx104_gpio *stx104gpio;
|
|
int err;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL);
|
|
if (!stx104gpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], STX104_EXTENT,
|
|
dev_name(dev))) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + STX104_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
indio_dev->info = &stx104_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = stx104_channels;
|
|
indio_dev->num_channels = STX104_NUM_CHAN;
|
|
indio_dev->name = dev_name(dev);
|
|
|
|
priv = iio_priv(indio_dev);
|
|
priv->base = base[id];
|
|
|
|
/* initialize DAC output to 0V */
|
|
outw(0, base[id] + 4);
|
|
outw(0, base[id] + 6);
|
|
|
|
err = devm_iio_device_register(dev, indio_dev);
|
|
if (err) {
|
|
dev_err(dev, "IIO device registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
stx104gpio->chip.label = dev_name(dev);
|
|
stx104gpio->chip.parent = dev;
|
|
stx104gpio->chip.owner = THIS_MODULE;
|
|
stx104gpio->chip.base = -1;
|
|
stx104gpio->chip.ngpio = 8;
|
|
stx104gpio->chip.get_direction = stx104_gpio_get_direction;
|
|
stx104gpio->chip.direction_input = stx104_gpio_direction_input;
|
|
stx104gpio->chip.direction_output = stx104_gpio_direction_output;
|
|
stx104gpio->chip.get = stx104_gpio_get;
|
|
stx104gpio->chip.set = stx104_gpio_set;
|
|
stx104gpio->base = base[id] + 3;
|
|
stx104gpio->out_state = 0x0;
|
|
|
|
spin_lock_init(&stx104gpio->lock);
|
|
|
|
dev_set_drvdata(dev, stx104gpio);
|
|
|
|
err = gpiochip_add_data(&stx104gpio->chip, stx104gpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stx104_remove(struct device *dev, unsigned int id)
|
|
{
|
|
struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev);
|
|
|
|
gpiochip_remove(&stx104gpio->chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct isa_driver stx104_driver = {
|
|
.probe = stx104_probe,
|
|
.driver = {
|
|
.name = "stx104"
|
|
},
|
|
.remove = stx104_remove
|
|
};
|
|
|
|
module_isa_driver(stx104_driver, num_stx104);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("Apex Embedded Systems STX104 DAC driver");
|
|
MODULE_LICENSE("GPL v2");
|